Database Develop

greek rom?

Is there any greek(greek translated) rom for i897 captivate? My device is semi bricked. What should i do? It is in download mode and I try to reflash its stock rom (i897ucjf6) but when i hit start or master clear in odin it does not responding, it stucks on file analysis. I have no phone for a few days now. Please help.

First off, Wrong section. Second. i dont know what a greek rom is. Third. what windows are you using?
Any Windows xp,vista, 7: try a different usb port
vista or 7: run odin as admin. if nothing happens again, use a different usb port.
if all else fail, you can try a different computer. but im not sure if that will help.
also, if you have tried all the usb ports on your computer. try restarting the comp and see if it works then.
hope this helps

illeont said:
Is there any greek rom for i897 captivate? My device is semi bricked. What should i do? It is in download mode and I try to reflash its stock rom (i897ucjf6) but when i hit start or master clear in odin it does not responding. I have no phone for a few days now. Please help.
Click to expand...
Click to collapse
There are no Greek Tom's for the captivate. Most are set To WWE. As for your issues please answer the above questions. I will move this once i get to a PC.
Make sure things things are done.
1. Drivers installed
2.Phone was put into DL mode by Odin
3.Drivers installed (Yes It is that big Of an issue)
Sent from my SGH-I897 using XDA Premium App

I'm running win xp and i 've tried all usb ports i have. It always stucks on file analysis. Thanks for helping.

ah ok, Well i had this issue in the past. and what help me was using a different computer. but at that time i had an windows 7 comp, so i used my sisters xp comp it worked right away. so at this point, i would iether try restarting your comp. or using another comp...
i have an idea but im not sure if its posible. there is another oden somewhere on here i believe its I897UCJI6 one click. i believe at the time it was the unofficial 2.2 release by designgears. try running that, and if it works, try using the I897UCJF6 to go back to bone stock...
Are you opening odin b4 connecting the device to the comp. make sure oden is open, and that the phone is in dl mode. then connect the device to the comp.
and like zelendel said, are the drivers installed?

kaoticvisual said:
ah ok, Well i had this issue in the past. and what help me was using a different computer. but at that time i had an windows 7 comp, so i used my sisters xp comp it worked right away. so at this point, i would iether try restarting your comp. or using another comp...
i have an idea but im not sure if its posible. there is another oden somewhere on here i believe its I897UCJI6 one click. i believe at the time it was the unofficial 2.2 release by designgears. try running that, and if it works, try using the I897UCJF6 to go back to bone stock...
Are you opening odin b4 connecting the device to the comp. make sure oden is open, and that the phone is in dl mode. then connect the device to the comp.
and like zelendel said, are the drivers installed?
Click to expand...
Click to collapse
I open odin, then connect the device and hit start. The device is already in download mode and all drivers are installed. It still stucks on file analysis. Only one time passed it but stuck again on set pit file. I'll try another computer and let you know.

[Q] Odin didn't recognize the SGS

Hi,
I'm about to Flash to 2.3.3 firmware.. but the problem is that after i put my SGS into download mode the Odin didn't recognize my SGS (ID:COM) didn't display YELLOW.., but while i'm on normal mode every time i connect to my laptop Odin always recognize it..
Please help...
Thanks

Start Odin after connecting the phone and the laptop has already 'seen' the phone.
Sent from my GT-I9000 using XDA App

It's recognized my phone, but once i turn it too download mode by " Volume down+Home+Power) and connect to laptop again.. it's never recognized...

Try running Kies in the background then connect and see what Odin says .
jje

Disconnect SGS USB cable... Close Odin. And update your SGS drivers!
http://forum.xda-developers.com/showthread.php?t=961956
-> Restart PC.
-> Open Odin, put in your files
-> Connect USB cable to PC, THEN to the SGS! (First PC, then Phone)
-> Hopefully you should see Yellow COM!
PS: While in Download Mode, and when connected to PC... Windows may download/update some more drivers. Let it happen! Do not disconnect!

There are two version (*86) and (*64) which one should i choose?

Never had this problem but can suggest few things
1. uninstall kies and reinstall SGS drivers only (Google them, they are available on net)
If doesn't work
2. do a factory reset and try with Odin
3. if not, restore the phone, if you have backup on Clockwork mode recovery.
As i said, never experience this issue, so just suggesting

x86 is for 32-bit Windows, and x64 is for 64-bit Windows!
To check what you own, Right-click on "My Computer" -> Properties -> And see what's written, 32-bit (x86) or 64-bit (x64)
Also, try uninstalling Kies, and install only the drivers posted on that link!
While running Odin, it is recommended that Kies should not be running, even as a service!

Okay, but my SGS is not yet rooted, so is there any chance the Odin didn't recognize my phone due to unrooted device??

i've got the same problem,cant upgrade to gingerbread because of it...tried everything suggested in this thread..even restored a backup i made using clockwork recovery...spent 3 weeks googling and restoring my phone reinstalling drivers e.t.c...ive given up and im stuck on froyo 2.2.1 XXJPY.

Rooted mobile or not rooted, no difference, odin shd recognize, u may try another version of odin or use update.zip or root it to install a custom rom, guessing, u might be missing some bootloaders
Sent from my GT-I9000 using XDA Premium App

Thanks.. For today i tried many ways... Tomorrow I'll try again... I somehow use to rooted my sgs using odin... But utter was long time ago and i couldn't remember.
Sent from my GT-I9000 using XDA App

See under galaxy s general forum ...howto(ref)(faq)...... Rooting is explained there, use update.zip procedure
http://forum.xda-developers.com/showthread.php?t=723596
Hope that works
Sent from my GT-I9000 using XDA Premium App

Phone Stucked At "At&t World Phone Screen"

I have Cognition V4.5.3
Im A Noob At This... Tried Ti Flash A Kernel With [APP] SGS Kernel FLasher
When I Rebooted My Phone Its Just Stuck At The Boot Screen...
Does Not Want To Go In Recovery Mode... Just Download Mode....
But Heimdall Does Not Recognize My Device...
What Can I Do? I Need To Get My Phone Back, Since Its A Gift
Thanks...

and i only have a mac... =/

wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks

Try Odin 1 Click. You'll find it on here somewhere. It wil take you back to stock 2.1 Eclair. Then you can READ ABOUT flashing other ROMs and proceed from there.

bertito2580 said:
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Click to expand...
Click to collapse
im sorry but most of us can't even help you IF we want to The users of windows based PC's are greater in this forums compared to Macs. if there is drivers for mac, are they installed?

Since you only have a Mac, I would suggest installing Windows through Boot-Camp (included in Mac OSX) on a different partition. I read Galaxy S doesn't have drivers support for Mac OSX Leopart or later, not entirely sure if its true though, but I do have a MacBook Pro and had no success in finding a way to connect my phone to it by USB... Good thing I had a regular old Windows PC Desktop.
Then as Jack Man said, use Odin 1-Click found here
http://forum.xda-developers.com/showthread.php?t=731989
to reset your phone completely to factory settings, relatively simple to do as long as you read the instructions on that post. =)

Well since you only have a Mac and hiemidal is not see your phone i think your only option is to find a friend with a PC and give the Odin 1 click a try.

i ask my aunt for her pc,
Windows Vista 32-Bit
Downloaded And Installed The Drivers
Using Odin3 One-Click
I Put My Phone On Download Mode With The 3keyCombo
And The PC Says"USB Device Not Recognized"
Im Just Gettind Pissed And Stressed
It's My Only Phone.
What Can I Do To Fix This?

Also Tried Running Odin As Administrator... And NOthing...

bertito2580 said:
Also Tried Running Odin As Administrator... And NOthing...
Click to expand...
Click to collapse
Sir, just in case, did you reboot after installing drivers and BEFORE you tried connecting the device? Also, did you check if Odin detected your device when its connected in Download mode?

yes, and thats what in trying to do, to get odin to detect my phone in download mode...

Ok, is your phone detected by the operating system? If it does, then try using this other Odin thread instead, this one however will restore it to Stock Samsung Galaxy with 2.3 Gingerbread.
http://forum.xda-developers.com/showthread.php?t=1127249
Don't have to follow the rest of the instructions to root it just in case, but see if that version of Odin detects your phone.

actually thats the problem... windows vista doesnt recognize my device, either my mac... is there a solution to my phone or not? please help

OMG please help ((
I've Installed Captivate Drivers
Also
Galaxy S General Drivers
But When I Put My Captivate On Download MOde It Just Says
"USB Device Not Recognized"
One of the devices attached to this computer has malfunctioned and
Windows does not recognize it.

Are you sure it goes in to Download Mode (little android with a shovel)? Also have u tried different usb ports?

Like the above said, are you sure you are in download mode?
What USB port are you using if ots a desktop computer. There are known issues using front usb, plug into the usb on the back of the tower.
Also, are you sure odin doesnt see it? I know windows doesnt like it, but start odin, put phone in download mode, connect to pc. What does odin show? Any connected devices?
Sent from my GT-I9000 using XDA App

yes, im sure its on download mode and tried all the ports...
Im gonna try on another pc
to see if its the pc

Bricked even with download mode ?

Hi All,
here is the story, I was on MilkyS GB rom, made a ndriod backup, then flashed dark knight 2.1 then wiped , flashed DK3 w/ Semaphone. Today, I was going to flash stock JVU via Odin but while I was charging up the phone I already noticed Windows was showing error saying something like ' USB device is malfunction cannot install' , so I thought that must be a DK3 bug for not able to access to the SD card, so I did not care.
Went ahead and tried to flash Odin, sure enough Odin did not detect my phone, so did Google and found 'Gnex USB drivers' which by the way took forever to install, while waiting , I thought I might as well just go back to MilkyS GB by using the backup I have done before, so I went in recovery tried to restore, but not successful, so I went ahead and choose reboot....now I am stuck at the boot screen, pull battery, I can go into download mode , however, Odin cannot detect the phone so I still can NOT flash anything.... (just now tried all kinds of drivers I can find, CM7 USB driver, Google usb_driver_r04-windows, even installed the drivers within Andriod SDK, still can't detect the phone..)
Any suggestions ? am I out of luck ? by the way, tried installing drivers in 3 x different laptops and with different USB port on them...

Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.

scubadude said:
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
Click to expand...
Click to collapse
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...

bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
I guess you have tried going back in recovery mode using the 3-button combo but that is also not working?
Odin isn't recognizing your phone but does windows recognize it? If you uninstall all samsung drivers and then try to connect your phone to PC does it ask for installation of drivers? .. if it doesn't that means your phone's usb could have become faulty.. (just speculating)
Or you can try to use Heimdall instead of Odin.. maybe that'll work for you..

bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686

sorenba said:
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
Click to expand...
Click to collapse
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.

btw , I have also already use Android SDK to install the Google USB driver....see attached.

Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.

asaf-g said:
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
Click to expand...
Click to collapse
thanks just tried the drivers from EZbases Odin, still did not work.
btw, tried brushing the connector on the phone in case of dust etc , still no go.

anyone else has any idea?..so sad right now ...
Sent from my Dell Streak using XDA

Same happened with all my laptops featuring a intel chipset. My desktop with nVidia chipset is the only one that detected it.

bestjsg said:
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
Click to expand...
Click to collapse
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.

sorenba said:
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
Click to expand...
Click to collapse
thanks tried created a ubuntu live booted usb drive , installed heimdall , same thing can't detect the phone and then tried SDB in command prompt but gave error : device not found....
Sent from my Dell Streak using XDA

tried windows sdb , will try booting into ubuntu tonight and use sdb ..if that exist...
Sent from my Dell Streak using XDA

tried sdb via linux also , and got error device not found... anyone any idea ?
Sent from my Dell Streak using XDA

have read more threads haven't found a solution yet...
Sent from my Dell Streak using XDA

Same predicament
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!

eurorv said:
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
Click to expand...
Click to collapse
thanks for sharing ..just weird that no drivers for ics rom works and I was always told that as long as you can get to download mode the phone is not truely bricked...but guess that saying must be changed now....i
will virgin fix it for you ? will they charge you ?
Sent from my Dell Streak using XDA

My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!

eurorv said:
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
Click to expand...
Click to collapse
that is great news....do you know if they will have to open up the phone and flash the hardware?
Sent from my GT-P7510 using XDA

Odin and Samsung usb driver issues

So attempting to root I can not get my tmobile note 4 to be recognized by Odin when I enter downloading mode. I obviously tried installing samsung usb mobile driver, when I did a message window in Japanese with a red x appeared on my win 8.1 desktop. I tried different downloads of driver and even tried samsung site all give same error window. I then installed latest kies and it installed ok and recognized my note. I tried Odin and entered dl mode on note and still Odin doesn't recognize device. I uninstalled and reinstalled kies and driver but no luck. Is there a setting on my phone that's not allowing. I have usb Debug checked. When in dl mode it just says secure download enabled and then says entering udc. I am adb literate but new to odin. Any suggestions ...

Delete everything and start over. My laptop automatically downloads the drivers for me so not sure if your desktop will do the same.
If not, download drivers or just reinstall then and try it out and see if that works for you.

Well my fix was to go to a friend's house and use there pc. Tried everything and my win 8.1 did not like.

Removing or reinstalling Samsung drivers can be tricky. You did the right (easy) thing going to a different computer. Trying to use the same computer for an old and new Samsung device at the same time can easily cause your problem to happen. I found that you can't just switch between different versions of the drivers willy nilly. Perhaps the uninstaller routine doesn't work? Registry issue? Don't know.
If your win 8 pc can be rolled back to before you ever installed kies or a Samsung driver you might be able to get it to work using the correct (new) driver. That said, I'm still using the same driver I installed for my Note 2. Since it worked for the Note 4 and knowing what could happen, I left well enough alone!
Sent from my SM-N910T using XDA Free mobile app