Related
Hi,
I'm in NY at the moment but I'm headed back to Australia later in the week. The AT&T Galaxy Tab is $649 and the Telstra version is $840. I gather that SIM unlocking either version is not a problem. I spend a fair bit of time in both places. As the Telstra version has voice enabled, I was wondering if it's possible to simply flash the Telstra firmware onto the AT&T Tab? Would this cause any issues? Would it then be essentially an identical device to the Telstra sold tab?
Thanks.
It looks like you will be the first to find out. Sorry couldn't help mate
m_hawk_1 said:
As the Telstra version has voice enabled, I was wondering if it's possible to simply flash the Telstra firmware onto the AT&T Tab? Would this cause any issues? Would it then be essentially an identical device to the Telstra sold tab?
Click to expand...
Click to collapse
Find us Telstra firmware and we can at least test that the phone works here in some way.
I posted a similar Q a while ago. I want to flash my T-mobile Tab into a generic Euro (GT-P1000). After that I would like it to work with upgrades through Kies etc.
If I just understood the risks or pro/cons I would go.
I bought the telstra tab. It is unlocked out of the box and has voice enabled. It uses the same bands as att. So I am guess ing this firmware would work fine on an att tab.
Sent from my GT-P1000T using XDA App
m_hawk_1 said:
I bought the telstra tab. It is unlocked out of the box and has voice enabled. It uses the same bands as att. So I am guess ing this firmware would work fine on an att tab.
Click to expand...
Click to collapse
It should, but please follow my backup thread and backup your existing firmware before you flash the Euro firmware. Someone, maybe even you, may need it someday.
I don't think I will need to flash any other firmware. The telstra firmware has voice calling and side loading enabled out of the box. It is also sim unlocked. I should be able to put my att sim in, change the apn and go!
Sent from my GT-P1000T using XDA App
hi do u have the back up .tar file for your p1000t that u can share with us as i have one my friend brick it some how i am unable to find any p1000t.tar firmware anywhere i needed to get this brick working again, thank u for sharing in advance.
p1000t flash file
hi dear
i need p1000t flash file .can bodey help me.my device after flash by anthoer flash file now samsung logo only.please help me.
rotohammer said:
Find us Telstra firmware and we can at least test that the phone works here in some way.
Click to expand...
Click to collapse
I woild like this to play with
I've used the roto backup from http://forum.xda-developers.com/showthread.php?p=13391743 without any problems a few times when restoring my GT-P1000T back to stock (Telstra).
Hey guys,
First of all props for the great job you've done. I have a few questions which I'd be thankful for if you could answer. First of all I've googled this hundreds of times but I still can't find what exactly IS gingerbread software, and why is it preferred over official firmwares? Secondly I would like to know how to access the root files after rooting so I can delete the wifi file. (My tab has the wifi connectivity problem). Lastly I flashed my T-mobile tab to Euro firmware using Ayman07's guide, the dialer is there etc, but the problem is that I want to use this in Pakistan. So how do I make the tab function with the sim from Pakistan? Whenever I put the sim in I get 'Not registered on network'. Sorry for all the questions, but thank you in advance. Great job once again.
Bmanride said:
what exactly IS gingerbread software, and why is it preferred over official firmwares?
Click to expand...
Click to collapse
Gingerbread actually is an official software version of Android and it's not yet available on the Tab. You can put Gingerbread on the Tab using one of the ROM's from the development section.
Bmanride said:
Secondly I would like to know how to access the root files after rooting so I can delete the wifi file. (My tab has the wifi connectivity problem).
Click to expand...
Click to collapse
You can download Root Explorer from the market or use adb to do this.
Bmanride said:
Lastly I flashed my T-mobile tab to Euro firmware using Ayman07's guide, the dialer is there etc, but the problem is that I want to use this in Pakistan. So how do I make the tab function with the sim from Pakistan? Whenever I put the sim in I get 'Not registered on network'. Sorry for all the questions, but thank you in advance. Great job once again.
Click to expand...
Click to collapse
Not sure on this last one, sorry.
R,
Stu
You need to flash a modem for your region. In settings, about, what baseband is shown?
rangercaptain said:
You need to flash a modem for your region. In settings, about, what baseband is shown?
Click to expand...
Click to collapse
The baseband version is P1000XXJHA. One more question, will I have to flash the T mobile modem switcher by rotohammer also? Thanks in advance.
@Stu Thanks for the help.
Oh and I found some information of the network I want to use the tab with in Pakistan, if you could look at it and tell me which modem to flash I'd be thankful.
Years of Business: 15
Cities: 10,000+
Investment: USD 3.3 Billion+
Switches: 66
Cell Sites: 8,000+
Optical Cable Deployment: 6,500 KM
Switches: Nokia-Siemens, Alcatel, Huawei
Radio Base Stations: Motorola and Alcatel.
Intelligent Networks: Siemens
Microwave Equipment: NEC and Alcatel
Operating Frequency: 900/1800 MHz
SMSC: Logica CMG
Can anyone give some advice?
You will need the JPZ modem.If you use Overcome rom the modem is included within the procedure....good luck!
The JPZ modem will be ok, but the carrier you will have is the same as at&t, so I recommend the JK3 modem.
You will get voice and EDGE data speed (2g). 3g is not possible for your t-mobile tab, no matter which modem you use, because the radio does not have the frequencies needed for 3g on that network.
rangercaptain said:
The JPZ modem will be ok, but the carrier you will have is the same as at&t, so I recommend the JK3 modem.
You will get voice and EDGE data speed (2g). 3g is not possible for your t-mobile tab, no matter which modem you use, because the radio does not have the frequencies needed for 3g on that network.
Click to expand...
Click to collapse
Thanks a lot sir.
UNLOCKED BOOTLOADER ONLY!!!
Well i wrote this post because many users are having problem upgrading the HD to Jelly Bean, there are simple steps to having a 100% working JB Phone!!!
1. download the JB firmware from Telstra Full from here http://sbf.droid-developers.org/van...A028.0R_LSAVNQJBTELSTRA_P010_A010_CFC.xml.zip or from Firmware thread!
THANKS TO FIRMWARE TEAM!
I like the Telstra one because Orange and SFR have many battery issues.
2. download the modem_signed file of your operator, U can find it on your Firmware file ICS, In this case were gonna use the Telcel Mexico one (is very important to use the correct one, because in each region LTE works in different freq.
Also u have to extract the fsg_signed file too.
Telcel Modem_Signed https://www.box.com/s/dp2aj3v8odeu65yqkr2x
Rogers Modem_Signed https://www.box.com/s/i2qnaauvc0pd3xmn23mg
AGAIN THANKS TO FIRMWARE TEAM!
3. download the .xml edited: https://www.box.com/s/ylydzzjs79ynmj1vbdm3 This file works for everyone, its just an edited file to run the rsd lite without GETVAR error.
4. with the Telstra firm downloaded double click on it and open with WinRar and Replace the .xml, the fsg_signed and modem_signed files.
5. and thats it! u have a fully functional SBF file to start flashing with RSD Lite.
Btw here u can find the latest drivers.... https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
any issue im here to support u!!!
Thanks for this! I really needed a tut, can't believe telcel hasn't released jb for our devices u.u
Sent from my XT925
Royalfox said:
Thanks for this! I really needed a tut, can't believe telcel hasn't released jb for our devices u.u
Sent from my XT925
Click to expand...
Click to collapse
The official JB release comes to telcel in lately January or February.
dashiell.cano said:
The official JB release comes to telcel in lately January or February.
Click to expand...
Click to collapse
Can't wait lol.
How do I flash with RSD Lite? And how can I keep root?
Sent from my XT925
dashiell.cano said:
UNLOCKED BOOTLOADER ONLY!!!
Well i wrote this post because many users are having problem upgrading the HD to Jelly Bean, there are simple steps to having a 100% working JB Phone!!!
1. download the JB firmware from Telstra Full from here http://sbf.droid-developers.org/van...A028.0R_LSAVNQJBTELSTRA_P010_A010_CFC.xml.zip or from Firmware thread!
I like the Telstra one cause Orange and SFR have many battery issues.
2. download the modem_signed file of your operator, U can find it on your Firmware file ICS, In this case were gonna use the Telcel Mexico one (is very important to use the correct one, because in each region LTE works in different freq.
Telcel Modem_Signed https://www.box.com/s/dp2aj3v8odeu65yqkr2x
3. download the .xml edited: https://www.box.com/s/ylydzzjs79ynmj1vbdm3 This file works for everyone, its just an edited file to run the rsd lite without GETVAR error.
4. with the Telstra firm downloaded double click on it and open with WinRar and Replace the .xml and modem_signed files.
5. and thats it! u have a fully functional SBF file to start flashing with RSD Lite.
any issue im here to support u!!!
Click to expand...
Click to collapse
Little question ... Telstra don't support LTE ?
I have installed the full Telstra without Rogers modem ... because i am not in lte zone for the moment ... i really prefer the telstra modem version ! More stable in HSPA and better signal/speed for me on The canadian Telus Carrier Than the Original Rogers modem on ics ! just no test in lte ...
Royalfox said:
Can't wait lol.
How do I flash with RSD Lite? And how can I keep root?
Sent from my XT925
Click to expand...
Click to collapse
download and install rsd lite Version 6.1.4 and the drivers from Motorola support website, conect ur phone, select the sbf file that u create in Filename and click on start! easy!!!
if u have problems add me in whatsapp +524423599702
cedqc418 said:
Little question ... Telstra don't support LTE ?
I have installed the full Telstra without Rogers modem ... because i am not in lte zone for the moment ... i really prefer the telstra modem version ! More stable in HSPA and better signal/speed for me on The canadian Telus Carrier Than the Original Rogers modem on ics ! just no test in lte ...
Click to expand...
Click to collapse
YES, Telstra support LTE but LTE have different freqs and sometimes one doesnt work in another country, ex. In Mexico And Canada we have the same freq, but in Brazil and US we cant have LTE working! the modem_signed from Telstra could work in ur country but maybe not, better u replace the file and u gonna have a fully working Firm!
Please Credits Firmware Team, thanks
Enviado desde mi XT925 usando Tapatalk 2
Pzyduck said:
Please Credits Firmware Team, thanks
Enviado desde mi XT925 usando Tapatalk 2
Click to expand...
Click to collapse
Yeah youre right! .... post edited!
*Sent from my Razr G*
on rogers tried with rogers modem. everything works except lte.
Sent from my XT925 using Tapatalk 2
Did u check the network config?
*Sent from my Razr G*
Just test on telus ( with the rogers phone full flashed to telstra firmware... no need to flash rogers radio ) LTE work great without any problem... in QC City area...
i will try in the next hours with a rogers lte micro sim card
dashiell.cano said:
Did u check the network config?
*Sent from my Razr G*
Click to expand...
Click to collapse
Sorry i meant i'm on Fido but with Rogers Modem, I checked network config. everything was correct but no LTE. was getting 3G speeds.
I also tried the Telstra Modem, no LTE but 3g works. Maybe others will have better luck then me.
Rogers LTE
Krizid said:
Sorry i meant i'm on Fido but with Rogers Modem, I checked network config. everything was correct but no LTE. was getting 3G speeds.
I also tried the Telstra Modem, no LTE but 3g works. Maybe others will have better luck then me.
Click to expand...
Click to collapse
Im having the same problems. Im using The Telstra Full with the rogerss modem and I cant get LTE, only HPDSA. Its quite fast, about 8mbps down but no LTE
I double checked all my APN settings from the Rogers website.
My Rogers XT925 phone work great in lte with telstra full flash with rogers and telus !
But a friend have a problem like you ...
Download http://forum.xda-developers.com/showthread.php?t=1943879
Telcel Mexico... get the radio files ... flash it ...
Now my friend have LTE
This is really werd
cedqc418 said:
My Rogers XT925 phone work great in lte with telstra full flash with rogers and telus !
But a friend have a problem like you ...
Download http://forum.xda-developers.com/showthread.php?t=1943879
Telcel Mexico... get the radio files ... flash it ...
Now my friend have LTE
This is really werd
Click to expand...
Click to collapse
So weird! Some friends are having the LTE issue and when they replace the modem signed with one totally different the LTE back to work! Dont know why!
*Sent from my Razr G*
Telstra with Mexico Modem..still no LTE
dashiell.cano said:
So weird! Some friends are having the LTE issue and when they replace the modem signed with one totally different the LTE back to work! Dont know why!
*Sent from my Razr G*
Click to expand...
Click to collapse
I tried using the Telstra full with the mexico modem. still no LTE on Rogers (BC) in the mobile settings, only 2g/3g/4g is offered, no LTE
ill try to put links to each modem from each region, and a easy way to flash it without lose anything, just waaaaait!
AdamMarkTodd said:
I tried using the Telstra full with the mexico modem. still no LTE on Rogers (BC) in the mobile settings, only 2g/3g/4g is offered, no LTE
Click to expand...
Click to collapse
Lol i have found you problem ... i thing ... 4G icon is LTE ... on telstra firwmware !!! there are no LTE icon !!!! 4G is LTE !
---------- Post added at 03:27 PM ---------- Previous post was at 03:22 PM ----------
http://techau.tv/blog/images/Motorola-and-Telstra-Announce_D5F4/IMG_0997.jpg
Check the phone at the left ... is connected to LTE ;p
dashiell.cano : Add this détails on the first post ;p !
Fixed it
cedqc418 said:
Lol i have found you problem ... i thing ... 4G icon is LTE ... on telstra firwmware !!! there are no LTE icon !!!! 4G is LTE !
---------- Post added at 03:27 PM ---------- Previous post was at 03:22 PM ----------
Check the phone at the left ... is connected to LTE ;p
dashiell.cano : Add this détails on the first post ;p !
Click to expand...
Click to collapse
Your half right! before I was getting only HSDPA+. I flashed the Rogers Modem signed AND fsg_signed. Then It all of a sudden started working on 4G (which I now know is actually LTE)
I had to enter MCC and the MNC to have 4G work. I found then on wiki
REMOVED
REMOVED
Amazing work. Thanks!
Will you be adding files for Wind Note 4?
gbual said:
Will you be adding files for Wind Note 4?
Click to expand...
Click to collapse
Sure I'll upload them now, should be about 40mins.
---edit---
Done, see above.
Is there a way to root without tripping Knox?
nabobcoffee said:
Is there a way to root without tripping Knox?
Click to expand...
Click to collapse
Not that I know of yet, sorry.
Has anyone tried ART? and does the Canadian version support 64 bit?
nabobcoffee said:
Has anyone tried ART? and does the Canadian version support 64 bit?
Click to expand...
Click to collapse
No the snapdragon chip set is 32 bit only.
Sent from my SM-N910W8 using XDA Free mobile app
---------- Post added at 08:31 AM ---------- Previous post was at 08:29 AM ----------
Beautiful work with these stock files and posting all the rooting/recovery info and links in one thread. Looking forward to the ride on the GN4.
Sent from my SM-N910W8 using XDA Free mobile app
Which Rom section Can I use then to flash the Canadian version ? Tmobile, Att, ?
you say that
"It is also sim unlocked, so it can be used with any Canadian carrier."
I have a roger version, seems to be locked. So if I root and flash this will unlock the sim carrier?
thank you
price31 said:
you say that
"It is also sim unlocked, so it can be used with any Canadian carrier."
I have a roger version, seems to be locked. So if I root and flash this will unlock the sim carrier?
thank you
Click to expand...
Click to collapse
Odd my Bell one is unlocked, I popped in my buddy's Rogers sim with no issue.
Also says it's unlocked on the box.... I'll post a picture when I get home.
fritolays said:
Odd my Bell one is unlocked, I popped in my buddy's Rogers sim with no issue.
Also says it's unlocked on the box.... I'll post a picture when I get home.
Click to expand...
Click to collapse
Nice, at least we know now that Bell version is unlocked! I had to pay around 15$ to get it unlocked!
very odd, my bell was locked.....had to unlock before poping a rogers sim...
price31 said:
you say that
"It is also sim unlocked, so it can be used with any Canadian carrier."
I have a roger version, seems to be locked. So if I root and flash this will unlock the sim carrier?
thank you
Click to expand...
Click to collapse
Rooting will not Carrier Unlock your device - Flashing a Custom Rom will not Carrier Unlock your device - Either pay Rogers $50 after 3 months - or go to sammobile.com - They offer a Carrier Unlock service.
fritolays said:
Sure I'll upload them now, should be about 40mins.
---edit---
Done, see above.
Click to expand...
Click to collapse
I had problems with a tmobile rom so i used your steps with the stock NJ3 Wind rom. However the file turned out to be a Bell Rom. My csc even says BMC when i check it. My signal hasn't been as good on this stock rom.
Any chance you know where i can find the actual Wind rom that came with the phone?
gbual said:
I had problems with a tmobile rom so i used your steps with the stock NJ3 Wind rom. However the file turned out to be a Bell Rom. My csc even says BMC when i check it. My signal hasn't been as good on this stock rom.
Any chance you know where i can find the actual Wind rom that came with the phone?
Click to expand...
Click to collapse
Check on sammobile.com - You'll have to register / sign in if you want to download it
Its All Just N910W8
zxaz said:
very odd, my bell was locked.....had to unlock before poping a rogers sim...
Click to expand...
Click to collapse
Mine definitely is, and came out the box that way. I've adjusted the OP to omit the sim unlock given that its inconsistent.
shaggyskunk said:
Check on sammobile.com - You'll have to register / sign in if you want to download it
Click to expand...
Click to collapse
Firstly getting them from sammobile wont change a thing; the files provided are the same.
gbual said:
I had problems with a tmobile rom so i used your steps with the stock NJ3 Wind rom. However the file turned out to be a Bell Rom. My csc even says BMC when i check it. My signal hasn't been as good on this stock rom.
Any chance you know where i can find the actual Wind rom that came with the phone?
Click to expand...
Click to collapse
Now to clarify, unlike the US or the rest of the world; all the carriers in Canada use the same rom.
Meaning no matter if you have wind, bell, telus, rogers etc its all the same modem, kernel, recovery, and system.
Its all N910W8, so there cannot be a modem/signal difference.
And for proof here is a list of MD5's checksums for the files I provide and what sammobile provides:
Code:
# MD5 checksums generated by MD5summer (http://www.md5summer.org)
# Generated October 31 8:36:52 am
621d141192fd8e35cd513db59a9bf2f1 *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
621d141192fd8e35cd513db59a9bf2f1 *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
621d141192fd8e35cd513db59a9bf2f1 *fritolays/RWC-N910W8VLU1ANJ3-20141022130806/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
621d141192fd8e35cd513db59a9bf2f1 *fritolays/TLS-N910W8VLU1ANJ3-20141022121215/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
621d141192fd8e35cd513db59a9bf2f1 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
621d141192fd8e35cd513db59a9bf2f1 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
621d141192fd8e35cd513db59a9bf2f1 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_RWC/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
621d141192fd8e35cd513db59a9bf2f1 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_TLS/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
It was the exact same with the Note 3; we only get one ROM.
So I am going to change the OP to reflect this fact and only provide 1 set of files with instructions on how to change your CSC.
Boom done problem solved.
---edit---
More proof, here are the MD5's for the extracted tar.md5's of wind & bell from my files and sammobile:
Code:
# MD5 checksums generated by MD5summer (http://www.md5summer.org)
# Generated October 31 8:54:37 am
fb746b9637aaa3fbde259969c558e886 *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/aboot.mbn
d81910c121e9b67800857027e6bca08a *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/boot.img
c7bc347a05a155be8ae39ee921c320cd *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/cache.img.ext4
abad70375b91bd3424de24cb7dde7a00 *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/modem.bin
621d141192fd8e35cd513db59a9bf2f1 *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
1be0e48f4bba4076897aaaf79032d799 *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/NON-HLOS.bin
c1a8e59a06c5ffc65b74dd2c93545ccb *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/recovery.img
85ca7059fd29f81218fb21fee1c9c64b *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/rpm.mbn
3be10861ec9e3a06a4d5ba2257362df7 *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/sbl1.mbn
b7ef33172f8f7f20b6eec93fd423a596 *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/sdi.mbn
cf20b5b3b891b7223008ed315a996b56 *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/system.img.ext4
e156797b751989e24dfa3d267832341d *fritolays/BMC-N910W8VLU1ANJ3-20141023103146/tz.mbn
fb746b9637aaa3fbde259969c558e886 *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/aboot.mbn
d81910c121e9b67800857027e6bca08a *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/boot.img
c7bc347a05a155be8ae39ee921c320cd *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/cache.img.ext4
abad70375b91bd3424de24cb7dde7a00 *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/modem.bin
621d141192fd8e35cd513db59a9bf2f1 *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
1be0e48f4bba4076897aaaf79032d799 *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/NON-HLOS.bin
c1a8e59a06c5ffc65b74dd2c93545ccb *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/recovery.img
85ca7059fd29f81218fb21fee1c9c64b *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/rpm.mbn
3be10861ec9e3a06a4d5ba2257362df7 *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/sbl1.mbn
b7ef33172f8f7f20b6eec93fd423a596 *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/sdi.mbn
cf20b5b3b891b7223008ed315a996b56 *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/system.img.ext4
e156797b751989e24dfa3d267832341d *fritolays/GLW-N910W8VLU1ANJ3-20141022130544/tz.mbn
fb746b9637aaa3fbde259969c558e886 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/aboot.mbn
d81910c121e9b67800857027e6bca08a *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/boot.img
c7bc347a05a155be8ae39ee921c320cd *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/cache.img.ext4
abad70375b91bd3424de24cb7dde7a00 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/modem.bin
621d141192fd8e35cd513db59a9bf2f1 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
1be0e48f4bba4076897aaaf79032d799 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/NON-HLOS.bin
c1a8e59a06c5ffc65b74dd2c93545ccb *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/recovery.img
85ca7059fd29f81218fb21fee1c9c64b *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/rpm.mbn
3be10861ec9e3a06a4d5ba2257362df7 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/sbl1.mbn
b7ef33172f8f7f20b6eec93fd423a596 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/sdi.mbn
cf20b5b3b891b7223008ed315a996b56 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/system.img.ext4
e156797b751989e24dfa3d267832341d *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_BMC/tz.mbn
fb746b9637aaa3fbde259969c558e886 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/aboot.mbn
d81910c121e9b67800857027e6bca08a *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/boot.img
c7bc347a05a155be8ae39ee921c320cd *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/cache.img.ext4
abad70375b91bd3424de24cb7dde7a00 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/modem.bin
621d141192fd8e35cd513db59a9bf2f1 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/N910W8VLU1ANJ3_N910W8OYA1ANJ3_N910W8VLU1ANJ3_HOME.tar.md5
1be0e48f4bba4076897aaaf79032d799 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/NON-HLOS.bin
c1a8e59a06c5ffc65b74dd2c93545ccb *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/recovery.img
85ca7059fd29f81218fb21fee1c9c64b *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/rpm.mbn
3be10861ec9e3a06a4d5ba2257362df7 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/sbl1.mbn
b7ef33172f8f7f20b6eec93fd423a596 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/sdi.mbn
cf20b5b3b891b7223008ed315a996b56 *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/system.img.ext4
e156797b751989e24dfa3d267832341d *Sammobile/N910W8VLU1ANJ3_N910W8OYA1ANJ3_GLW/tz.mbn
So this confirms that any bell, Rogers or tells phone can be unlocked to work on the AWS networks such as wind or chatr? I have done a ton of research and could not find the AWS bands on bells info but have seen both model numbers on bells, winds, etc. As N910W8
Has anyone had luck unlocking even though a company?
KillerX1911 said:
So this confirms that any bell, Rogers or tells phone can be unlocked to work on the AWS networks such as wind or chatr? I have done a ton of research and could not find the AWS bands on bells info but have seen both model numbers on bells, winds, etc. As N910W8
Has anyone had luck unlocking even though a company?
Click to expand...
Click to collapse
I'm going to say yes given that they are all N910W8 and all running the same rom.
But I haven't tested it personally; buddy at work has wind, I will try his sim in my phone next week and report back.
Hi, Im from Mexico and my note 3 uses a 4glte sim card for Telcel company with my plan, its suposed to work the att version here (1700MHz and 2100MHz) but my smartphone only shows "4g" (+HSPA) even in the areas with lte's support. I even tried many things on the hidden menu *#*#4636#*#* but nothing works even if I choose the lte option.
My note 3 info:
SM-N900A
Android 4.4.2
N900AUCUCN2
Custom rom dynamic kat 6.1
Please help me! Greetings from Mexico!
Don't gona appears "LTE" if your custom ROM use "4G". But no worries 4G/LTE are same thing. You can install this MOD for Xposed anyway and try. Good luck :highfive:
Thanks my friend but I´ve made many tests and I only get +hspa speed, never LTE, I dont what to do
alugah said:
Thanks my friend but I´ve made many tests and I only get +hspa speed, never LTE, I dont what to do
Click to expand...
Click to collapse
Flash Stock Rom :highfive:
Joku1981 said:
Flash Stock Rom :highfive:
Click to expand...
Click to collapse
Thanks, Can I flash telcel México kk stock rom in my att note 3? Cause in the original att stock rom I didnt get lte too
alugah said:
Thanks, Can I flash telcel México kk stock rom in my att note 3? Cause in the original att stock rom I didnt get lte too
Click to expand...
Click to collapse
I think you just need to add telcel APN in Settings/Connections/More Networks/Mobile Networks/Access Point Names
Nombre: telcel
APN: internet.itelcel.com
Found here https://www.youtube.com/watch?v=I-N-atXwP_w hopefully that works for you and you won't have to reflash!
brisinger08 said:
I think you just need to add telcel APN in Settings/Connections/More Networks/Mobile Networks/Access Point Names
Nombre: telcel
APN: internet.itelcel.com
Found here https://www.youtube.com/watch?v=I-N-atXwP_w hopefully that works for you and you won't have to reflash!
Click to expand...
Click to collapse
Thanks for everything, I ve already did that
alugah said:
Thanks for everything, I ve already did that
Click to expand...
Click to collapse
How about these http://celularesdepanama.com/apn/mexico/apn-telcel-mexico/
If that still doesn't work or if you've tried those already sorry that's all i've got
brisinger08 said:
How about these http://celularesdepanama.com/apn/mexico/apn-telcel-mexico/
If that still doesn't work or if you've tried those already sorry that's all i've got
Click to expand...
Click to collapse
Thanks my friend, and everybody, I configure the lte APN Settings and the hidden test menú, I think its problem of the company cause sometimes for 10-15 seconds I get lte but thats all.