Database Develop

[MOD] Retail Brazil Radio (by request) AT&T Atrix only

Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.

Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App

guidojusto said:
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I see. So I'm not the only one not having HSPA in Argentina.
I only have the Retail Brazil and the Telstra one that dew.man uploaded some time ago.
The 4.2.1.1 radio kills the signal almost completely, so I deleted it. I can rebuild it if you want, but I don't see the point.
Currently the best radio seems to be the 4.1.8.3 one.
I hope this HSPA issue will be solved with Gingerbread.
What other radio do you want?. I can make you one with the Claro Brasil radio.

Whipon said:
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Click to expand...
Click to collapse
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.

josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista

josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83

Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk

Rayan said:
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken

jorge_moran_jams said:
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated

jorge_moran_jams said:
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated

josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.

Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk

http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada

Rayan said:
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
If I for example, say I'm using the 4.1.8.3 radio, that means I'm using the stock radio of that firmware. Its obvious. Build numbers are easier to remember.

ytwytw said:
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Click to expand...
Click to collapse
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.

Whipon said:
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Click to expand...
Click to collapse
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...

alex_herrero said:
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Click to expand...
Click to collapse
I will try changing the sim card because it looks a little old and haven't changed it for 4 years. Maybe it's time and also it's my last option
Enviado desde mi MB860 usando XDA Premium App

ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
Exactly, thats what I've been saying for the last three posts, but some ppl just dont get it.
Thats a good point by the way!
Sent from my Atrix using Tapatalk

ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
Click to expand...
Click to collapse
I will talk the way I want. If someone is so stupid to think I'm talking about flashing a full sbf its not my problem
ytwytw said:
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
First, the radio only SBF some posts above doesn't work on an AT&T Atrix. Period.
It uses diferent ram downloaders incompatible with the AT&T one.
If you try to flash it, you'll get an error in both the phone and RSD Lite.
Second, knowing this, I would like to know how these "lots of people" tested the radio not having a working sbf to flash it. I've tested it, making a working SBF myself and all ended with the results I described. I can upload the SBF if anyone is willing to test it.

josuetenista said:
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
Click to expand...
Click to collapse
You said that you have tried all those radios?
Do you know where I can download N_01.77.15P?
I "upgraded" to N_01.87.00R thinking that it would be better, but no. I think N_01.77.15P offers better performance.
Thanks!
Rayan

[Q] Some nooby questions

Hey guys,
First of all props for the great job you've done. I have a few questions which I'd be thankful for if you could answer. First of all I've googled this hundreds of times but I still can't find what exactly IS gingerbread software, and why is it preferred over official firmwares? Secondly I would like to know how to access the root files after rooting so I can delete the wifi file. (My tab has the wifi connectivity problem). Lastly I flashed my T-mobile tab to Euro firmware using Ayman07's guide, the dialer is there etc, but the problem is that I want to use this in Pakistan. So how do I make the tab function with the sim from Pakistan? Whenever I put the sim in I get 'Not registered on network'. Sorry for all the questions, but thank you in advance. Great job once again.

Bmanride said:
what exactly IS gingerbread software, and why is it preferred over official firmwares?
Click to expand...
Click to collapse
Gingerbread actually is an official software version of Android and it's not yet available on the Tab. You can put Gingerbread on the Tab using one of the ROM's from the development section.
Bmanride said:
Secondly I would like to know how to access the root files after rooting so I can delete the wifi file. (My tab has the wifi connectivity problem).
Click to expand...
Click to collapse
You can download Root Explorer from the market or use adb to do this.
Bmanride said:
Lastly I flashed my T-mobile tab to Euro firmware using Ayman07's guide, the dialer is there etc, but the problem is that I want to use this in Pakistan. So how do I make the tab function with the sim from Pakistan? Whenever I put the sim in I get 'Not registered on network'. Sorry for all the questions, but thank you in advance. Great job once again.
Click to expand...
Click to collapse
Not sure on this last one, sorry.
R,
Stu

You need to flash a modem for your region. In settings, about, what baseband is shown?

rangercaptain said:
You need to flash a modem for your region. In settings, about, what baseband is shown?
Click to expand...
Click to collapse
The baseband version is P1000XXJHA. One more question, will I have to flash the T mobile modem switcher by rotohammer also? Thanks in advance.
@Stu Thanks for the help.

Oh and I found some information of the network I want to use the tab with in Pakistan, if you could look at it and tell me which modem to flash I'd be thankful.
Years of Business: 15
Cities: 10,000+
Investment: USD 3.3 Billion+
Switches: 66
Cell Sites: 8,000+
Optical Cable Deployment: 6,500 KM
Switches: Nokia-Siemens, Alcatel, Huawei
Radio Base Stations: Motorola and Alcatel.
Intelligent Networks: Siemens
Microwave Equipment: NEC and Alcatel
Operating Frequency: 900/1800 MHz
SMSC: Logica CMG

Can anyone give some advice?

You will need the JPZ modem.If you use Overcome rom the modem is included within the procedure....good luck!

The JPZ modem will be ok, but the carrier you will have is the same as at&t, so I recommend the JK3 modem.
You will get voice and EDGE data speed (2g). 3g is not possible for your t-mobile tab, no matter which modem you use, because the radio does not have the frequencies needed for 3g on that network.

rangercaptain said:
The JPZ modem will be ok, but the carrier you will have is the same as at&t, so I recommend the JK3 modem.
You will get voice and EDGE data speed (2g). 3g is not possible for your t-mobile tab, no matter which modem you use, because the radio does not have the frequencies needed for 3g on that network.
Click to expand...
Click to collapse
Thanks a lot sir.

Tmobile 4.4.3 sbf don´t signal with XT1052 Europe Version.

Hello Guys.
I flashed Tmobile 4.4.3 sbf in my XT1052 europe.
Every is fine but I had signal.
The only solution that I see is flash baseband of sbf eu.
With this I have signal. LMT, 3G, Edge.... Etc.... But I´ll like use the radio original of tmobile ever that possible.
My operator in Spain is Vodafone.
I saw other thread but is no solution for me because, the People was run a simcard of tmobile and I want run rom tmobile sbf in my XT1052 with Vodafone Spain and I can´t it.
Thanks in advance.

Nothing? :/
Enviado desde mi XT1053 mediante Tapatalk

You will probably have to flash a correct radio for your phone.
The TMO phone has LTE bands 2/4/17. Your phone has LTE bands 3/7/20.

mandrsn1 said:
You will probably have to flash a correct radio for your phone.
The TMO phone has LTE bands 2/4/17. Your phone has LTE bands 3/7/20.
Click to expand...
Click to collapse
And prior to that probably adjust build.prop and set the correct APN for your provider.

I don't want LTE because in my region haven't it.
I have radio of rom stock eu. And now I have signal.
I'll think that is possible run with radio of tmobile with 3g or 2g
I flashed patch of kryptonyte and nothing happen for my model.
Have a solution run tmbobile rom with baseband tmobile?

isaakmg said:
I don't want LTE because in my region haven't it.
I have radio of rom stock eu. And now I have signal.
I'll think that is possible run with radio of tmobile with 3g or 2g
I flashed patch of kryptonyte and nothing happen for my model.
Have a solution run tmbobile rom with baseband tmobile?
Click to expand...
Click to collapse
I don't quite understand your situation. Do you have signal but no data transmission or there is no mobile signal at all? In the first case set APN. In the second case something went terrible wrong during flashing. Dirty flash is possible reason what caused impact of two different systems. I assume that you have bootloader unlocked. Go back to stock and make a clean flash.

The answer is very simple. Tmobile stock rom 4.4.2 or 4.4.3 don't work radio with her baseband. Nothing of gsm, 2g or 3g. Nothing of data. WiFi yes.
The only solution is flash radio/baseband of rom eu or uk 4.4.2 for have signal and can make calles, data etc etc.....
I want work with the baseband of tmobile because I think that is better that work for other no original baseband like eu of uk....
Do you understand me now?
Sorry, my english is very poor.

isaakmg said:
The answer is very simple. Tmobile stock rom 4.4.2 or 4.4.3 don't work radio with her baseband. Nothing of gsm, 2g or 3g. Nothing of data. WiFi yes.
The only solution is flash radio/baseband of rom eu or uk 4.4.2 for have signal and can make calles, data etc etc.....
I want work with the baseband of tmobile because I think that is better that work for other no original baseband like eu of uk....
Do you understand me now?
Sorry, my english is very poor.
Click to expand...
Click to collapse
What are you trying to tell me is that US Tmobile Moto x can only work in the USA, what is not exactly true. Partially is correct for LTE but not for gsm or 3g. Tmobile's Moto x supports almost the same gsm or 3g frequencies as any European phone.

piskr said:
What are you trying to tell me is that US Tmobile Moto x can only work in the USA, what is not exactly true. Partially is correct for LTE but not for gsm or 3g. Tmobile's Moto x supports almost the same gsm or 3g frequencies as any European phone.
Click to expand...
Click to collapse
Why don't ran radio tmobile in 2g por 3g for calls and data?

isaakmg said:
Why don't ran radio tmobile in 2g por 3g for calls and data?
Click to expand...
Click to collapse
As I said dirty flash is possible reason. Try to get back original entire system (if you're unlocked) and this time totally follow the instructions.

I have unlocker version.
Flash total clean with adb....
Nothing of signal.....
Enviado desde mi XT1053 mediante Tapatalk

He says that he flashed XT1053 4.4.3 to EU version XT1052 and had no cell signal.
This is normal. You won't get signal on XT1052 when running on XT1053 modem firmware.
I did the same thing some time ago but the other way. I flashed XT1052 firmware to my XT1053 to get more EU languages. But I had to flash XT1053 modern files to get it working.
Why are you insisting on running XT1053 modem firmware on XT1052?
Sent from my XT1053 using Tapatalk

ujoty said:
He says that he flashed XT1053 4.4.3 to EU version XT1052 and had no cell signal.
This is normal. You won't get signal on XT1052 when running on XT1053 modem firmware.
I did the same thing some time ago but the other way. I flashed XT1052 firmware to my XT1053 to get more EU languages. But I had to flash XT1053 modern files to get it working.
Why are you insisting on running XT1053 modem firmware on XT1052?
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Because in general the works most fine....

No lte please help!

Hi, Im from Mexico and my note 3 uses a 4glte sim card for Telcel company with my plan, its suposed to work the att version here (1700MHz and 2100MHz) but my smartphone only shows "4g" (+HSPA) even in the areas with lte's support. I even tried many things on the hidden menu *#*#4636#*#* but nothing works even if I choose the lte option.
My note 3 info:
SM-N900A
Android 4.4.2
N900AUCUCN2
Custom rom dynamic kat 6.1
Please help me! Greetings from Mexico!

Don't gona appears "LTE" if your custom ROM use "4G". But no worries 4G/LTE are same thing. You can install this MOD for Xposed anyway and try. Good luck :highfive:

Thanks my friend but I´ve made many tests and I only get +hspa speed, never LTE, I dont what to do

alugah said:
Thanks my friend but I´ve made many tests and I only get +hspa speed, never LTE, I dont what to do
Click to expand...
Click to collapse
Flash Stock Rom :highfive:

Joku1981 said:
Flash Stock Rom :highfive:
Click to expand...
Click to collapse
Thanks, Can I flash telcel México kk stock rom in my att note 3? Cause in the original att stock rom I didnt get lte too

alugah said:
Thanks, Can I flash telcel México kk stock rom in my att note 3? Cause in the original att stock rom I didnt get lte too
Click to expand...
Click to collapse
I think you just need to add telcel APN in Settings/Connections/More Networks/Mobile Networks/Access Point Names
Nombre: telcel
APN: internet.itelcel.com
Found here https://www.youtube.com/watch?v=I-N-atXwP_w hopefully that works for you and you won't have to reflash!

brisinger08 said:
I think you just need to add telcel APN in Settings/Connections/More Networks/Mobile Networks/Access Point Names
Nombre: telcel
APN: internet.itelcel.com
Found here https://www.youtube.com/watch?v=I-N-atXwP_w hopefully that works for you and you won't have to reflash!
Click to expand...
Click to collapse
Thanks for everything, I ve already did that

alugah said:
Thanks for everything, I ve already did that
Click to expand...
Click to collapse
How about these http://celularesdepanama.com/apn/mexico/apn-telcel-mexico/
If that still doesn't work or if you've tried those already sorry that's all i've got

brisinger08 said:
How about these http://celularesdepanama.com/apn/mexico/apn-telcel-mexico/
If that still doesn't work or if you've tried those already sorry that's all i've got
Click to expand...
Click to collapse
Thanks my friend, and everybody, I configure the lte APN Settings and the hidden test menú, I think its problem of the company cause sometimes for 10-15 seconds I get lte but thats all.

Android 6.0 Galaxy S6 SM-G920T

hey!
I bought a Samsung Galaxy S6 SM.G920T on Best Buy a couple of months ago and i have it with an argentinian SIM.
i want to update the Software to 6.0 and i saw in Sammobile a 6.0 version. Here comes the problem, my firmare (G920TUEU3COK1) is from "cellular south" carrier and this version ( G920TUVU3EPD1) is from "USA/T-Mobile". I want to know if i install that firmware i can still use my argentinian sim? or i only can use the "cellular south" version?
My english is not perfect sorry
Thank you

Yes. Mine is from cellular south as well. You can flash it with t-mobile mm. and then flash this modem dropbox.com/s/fpkeyps54bzy2l6/modem.bin?dl=0 you should be able to use any carrier
here is the guide reddit.com/r/GalaxyS6/comments/4eazdg/nont_mobile_smg920t_need_some_insight/ follow this and you should be fine. good luck

whagalimashda said:
Yes. Mine is from cellular south as well. You can flash it with t-mobile mm. and then flash this modem dropbox.com/s/fpkeyps54bzy2l6/modem.bin?dl=0 you should be able to use any carrier
here is the guide reddit.com/r/GalaxyS6/comments/4eazdg/nont_mobile_smg920t_need_some_insight/ follow this and you should be fine. good luck
Click to expand...
Click to collapse
Ok i will try. Thank you!

whagalimashda said:
Yes. Mine is from cellular south as well. You can flash it with t-mobile mm. and then flash this modem dropbox.com/s/fpkeyps54bzy2l6/modem.bin?dl=0 you should be able to use any carrier
here is the guide reddit.com/r/GalaxyS6/comments/4eazdg/nont_mobile_smg920t_need_some_insight/ follow this and you should be fine. good luck
Click to expand...
Click to collapse
Quick update! it worked fine. I have signal and everithing Thanks!!!!

whagalimashda said:
Yes. Mine is from cellular south as well. You can flash it with t-mobile mm. and then flash this modem dropbox.com/s/fpkeyps54bzy2l6/modem.bin?dl=0 you should be able to use any carrier
here is the guide reddit.com/r/GalaxyS6/comments/4eazdg/nont_mobile_smg920t_need_some_insight/ follow this and you should be fine. good luck
Click to expand...
Click to collapse
does that modem work if I'm using this same phone on att network?

ejbmvp said:
does that modem work if I'm using this same phone on att network?
Click to expand...
Click to collapse
Idk you can try, if the modem fail you can flash again the old firm without problem

ejbmvp said:
does that modem work if I'm using this same phone on att network?
Click to expand...
Click to collapse
Yes :good:

thanks it works. it took me 2 reboots to get LTE to kick in. also it comes with some T-Mobile bloat but from what I see at a glance only about 6 things.