Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
guidojusto said:
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I see. So I'm not the only one not having HSPA in Argentina.
I only have the Retail Brazil and the Telstra one that dew.man uploaded some time ago.
The 4.2.1.1 radio kills the signal almost completely, so I deleted it. I can rebuild it if you want, but I don't see the point.
Currently the best radio seems to be the 4.1.8.3 one.
I hope this HSPA issue will be solved with Gingerbread.
What other radio do you want?. I can make you one with the Claro Brasil radio.
Whipon said:
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Click to expand...
Click to collapse
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Rayan said:
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
jorge_moran_jams said:
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
jorge_moran_jams said:
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Rayan said:
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
If I for example, say I'm using the 4.1.8.3 radio, that means I'm using the stock radio of that firmware. Its obvious. Build numbers are easier to remember.
ytwytw said:
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Click to expand...
Click to collapse
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Whipon said:
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Click to expand...
Click to collapse
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
alex_herrero said:
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Click to expand...
Click to collapse
I will try changing the sim card because it looks a little old and haven't changed it for 4 years. Maybe it's time and also it's my last option
Enviado desde mi MB860 usando XDA Premium App
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
Exactly, thats what I've been saying for the last three posts, but some ppl just dont get it.
Thats a good point by the way!
Sent from my Atrix using Tapatalk
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
Click to expand...
Click to collapse
I will talk the way I want. If someone is so stupid to think I'm talking about flashing a full sbf its not my problem
ytwytw said:
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
First, the radio only SBF some posts above doesn't work on an AT&T Atrix. Period.
It uses diferent ram downloaders incompatible with the AT&T one.
If you try to flash it, you'll get an error in both the phone and RSD Lite.
Second, knowing this, I would like to know how these "lots of people" tested the radio not having a working sbf to flash it. I've tested it, making a working SBF myself and all ended with the results I described. I can upload the SBF if anyone is willing to test it.
josuetenista said:
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
Click to expand...
Click to collapse
You said that you have tried all those radios?
Do you know where I can download N_01.77.15P?
I "upgraded" to N_01.87.00R thinking that it would be better, but no. I think N_01.77.15P offers better performance.
Thanks!
Rayan
Related
Okay... let me start by saying, I Love everyone here, and you all have helped mod my phone to great lengths... and my phone is working GREAT!
I am on an ALLTEL CDMA HERO200
Rooted with CM6.1
After I originally rooted my phone, and before I installed CM6.0 ...I upgraded my radio baseband from 2.42.01.04.23 to 2.42.01.04.27
and now upgraded to CM6.1 ROM / Android OS 2.2.1
I have the circular battery mod, as well as custom notification icons
and my signal is always 2 bars sometime 3 and never 4
My question is this... I just now realized that the radio I upgraded to is for SPRINT and I am on ALLTEL... like I said before the phone work fine
but I started looking for a download for the 2.42.01.04.23 radio baseband that I originally had because I was wondering if going back to 2.42.01.04.23 from 2.42.01.04.27 would give me a better signal since the 2.42.01.04.23 is for ALLTEL...
would going back to my original radio baseband make any difference is my signal strength and if so, does anyone have a download for the radio baseband version 2.42.01.04.23, as all I have is the 2.42.01.04.27 version...
teknikalcrysis said:
Okay... let me start by saying, I Love everyone here, and you all have helped mod my phone to great lengths... and my phone is working GREAT!
I am on an ALLTEL CDMA HERO200
Rooted with CM6.1
After I originally rooted my phone, and before I installed CM6.0 ...I upgraded my radio baseband from 2.42.01.04.23 to 2.42.01.04.27
and now upgraded to CM6.1 ROM / Android OS 2.2.1
I have the circular battery mod, as well as custom notification icons
and my signal is always 2 bars sometime 3 and never 4
My question is this... I just now realized that the radio I upgraded to is for SPRINT and I am on ALLTEL... like I said before the phone work fine
but I started looking for a download for the 2.42.01.04.23 radio baseband that I originally had because I was wondering if going back to 2.42.01.04.23 from 2.42.01.04.27 would give me a better signal since the 2.42.01.04.23 is for ALLTEL...
would going back to my original radio baseband make any difference is my signal strength and if so, does anyone have a download for the radio baseband version 2.42.01.04.23, as all I have is the 2.42.01.04.27 version...
Click to expand...
Click to collapse
i would do a little research on what you should do for your exact problem because i know when flashing the wrong radio it will brick your phone and once that happens your done for the thing wont even power on
everydaysince87 said:
i would do a little research on what you should do for your exact problem because i know when flashing the wrong radio it will brick your phone and once that happens your done for the thing wont even power on
Click to expand...
Click to collapse
NO! flashing a GSM (not CDMA, like sprint) radio is the only confirmed known way to brick. The OP also said his phone was working, so not bricked.
To the OP! my best advice would be to send a PM to member hexskrew, he has built alltel roms, so I assume he has whatever the newest alltel radio is, good luck to you
il Duce said:
NO! flashing a GSM (not CDMA, like sprint) radio is the only confirmed known way to brick. The OP also said his phone was working, so not bricked.
To the OP! my best advice would be to send a PM to member hexskrew, he has built alltel roms, so I assume he has whatever the newest alltel radio is, good luck to you
Click to expand...
Click to collapse
Thanks for the advice and pointing me to someone who may be able to assist...
and yeah I definitely dont want a GSM radio, lol
If you happen to find a version of the alltel radio, could you PM me or post it, i need it also. Im not having any luck finding one. My data has suddenly stopped working and i think if i update the radio it might fix my problem.
From what I've come up with, AFAIK the radio is just an algorithm of sorts that tells the radio (hardware) in the phone how to search for a signal, and how much power to output in order to find it... so I don't think an Alltel radio will help you much. Just experiment with them.
Hi guys, appreciate the help with this. I have rooted and have tried all sorts of roms on my Milestone
However with Cyanogen cm7 with Gingerbread 2.3 and other variances of the cm7 i cannot get any network coverage or cant connect to my provider. However my phone works perfect with the 2.3 AOSP roms...
Is there something obvious I am doing wrong? Am i missing something when installing cyanogen roms?
Help?
bikinibottom100 said:
Hi guys, appreciate the help with this. I have rooted and have tried all sorts of roms on my Milestone
However with Cyanogen cm7 with Gingerbread 2.3 and other variances of the cm7 i cannot get any network coverage or cant connect to my provider. However my phone works perfect with the 2.3 AOSP roms...
Is there something obvious I am doing wrong? Am i missing something when installing cyanogen roms?
Help?
Click to expand...
Click to collapse
Yes...You probably need to apply the basebands of your region when you install CM roms.
You can do that in Androidiani 3.3 Open Recovery, on the menu "Change baseband"
vladstercr said:
Yes...You probably need to apply the basebands of your region when you install CM roms.
You can do that in Androidiani 3.3 Open Recovery, on the menu "Change baseband"
Click to expand...
Click to collapse
Ahh OK so it has got to do with applying the basebands to my region.
I have seen this option in Open Recovery 3.3 . Is there any specific file I need to download or number I need to know before attempting to change my baseband.?
i live in New Zealand.
thanks.
bikinibottom100 said:
Ahh OK so it has got to do with applying the basebands to my region.
I have seen this option in Open Recovery 3.3 . Is there any specific file I need to download or number I need to know before attempting to change my baseband.?
i live in New Zealand.
thanks.
Click to expand...
Click to collapse
No, you dont need to download additional files. Just go to Androidiani 3.3 and try applying bands until you get coverage. Many of the people apply RTEU and it works. I dont know what is the baseband for your region, but you switch between them and you will find the proper one.
Hope I've been helpful!
vladstercr said:
No, you dont need to download additional files. Just go to Androidiani 3.3 and try applying bands until you get coverage. Many of the people apply RTEU and it works. I dont know what is the baseband for your region, but you switch between them and you will find the proper one.
Hope I've been helpful!
Click to expand...
Click to collapse
Sweeet as..You have been most helpful. Its working perfectly now. thanks
If you're with XT use the Brazil bb.
Sent from my Milestone using XDA Premium App
Where abouts in NZ are you? I'm also a Kiwi (Gisborne) and I have no baseband trouble at all on any of the GB ROM's, or any ROM's for that matter. I've never had to mess with the baseband and I move from ShadowMod to Cyan7 all the time as they release new updates.
What baseband did you use? Im having the same problem and I can't get 3g working for the life of me. I think it's a mixture of apn setting and baseband. Im on 2degrees btw.
I need help with this too. I live in Auckland and use Vodafone NZ. Originally, my milestone came installed with Froyo (v2.2) and it was the Europe version I believe......both 2G and 3G works fine on it, however I have problems with the wifi like many people have.
So then I later flashed to the New Zealand v2.1 SBF, and now wifi works fine but I can't get any connection to Vodafone. The reason is basically because Vodafone doesn't support Milestone, only Telecom XT does. However, if I switch the network from 2G to 3G, then I can connect to Vodafone. I can also connect to 2Degrees, I can see all 3 networks (Telecom, Vodafone, 2Degrees) when I'm on 3G and I get about 3/4 bars constant so it's stable.
But when if I switch to 2G, I get completely no bars and can't detect any networks at all. Not a big deal but I wanna use 2G to save battery. When I was using the Europe SBF (the v2.2 Froyo that came pre-installed with the Milestone), I was able to use 2G no problem.
Anyway, I think a simple baseband change should be fine, but I'm not sure which one I should use that works well with Vodafone NZ.
The baseband has to match your handset's capability. Xt units lack the Vodafone 900 band, they have 850 instead. Both carriers use 2100 in the CBD. Vodafone has also 2g network that has crap coverage. I'm using my xt set with Vodafone, but there's no point changing the bb as xt ms can't do 900 anyway. Basically get ****ty GPRS except right in town. It's only used as car GPS/stereo so no biggy for me.
but mine isn't originally an XT Milestone, I bought it 2nd hand on Trademe and the original owner of the phone got it from somewhere else. It's just that I flashed the New Zealand v2.1 SBF, which just so happens to be for Telecom since there isn't one for Vodafone......
Plus, it was able to work fine on 2G when I was using the Europe v2.2 (Froyo) SBF, so I don't see why a simple baseband change isn't possible?
Check the exact model number, most of the ones floating in nz are telecom models, no matter what the previous owner was using it with. You can change basebands as much as you want, if it doesn't match your hardware it just won't work. I.e. you will not have 3g outside of main centres. Afaik, 2g is the same on all models.
So, install OR, then one of the cyanogen based roms (it has all nz apns). Boot into or, there's a list of basebands - try till you get one that works.
Have you set your APN setting right?
Sent from my Milestone using XDA App
Cyanogen based roms have all the nz apns, otherwise, you have to put the correct one in.
Hi all ,
I would like to know if a baseband exists for the Lg Trill using T-Mobiles 3G/4G . The only reason im asking is because im with Simple Mobile right now and since they use T-Mobiles network I would like to get faster download speeds. BTW this baseband would have to work for GB. As I am currently using GB and I would like to keep GB. I would also like to know if there is a method if it was tested and if it was successful ? Thank You.
No amount of software can enable a radio band that isn't there. AT&T Thrill does not have 1700mhz band. That's like asking developers to create an app for the Thrill to shoot out an infrared beam to remote control my TV.
what version of gb you are running? was it the leak one or the official 21a kdz.
if u flash 21a kdz,file, then its very good chance that tmo 4g baseband already included, because i have o3d (p920) tmo version running 21a kdz and i get 3g/4g speed. as far as i know, thrill lack hardware 1700mhz band and that could be the reason no 3/4g on tmo or simple. however other user (p925) flashing 21a kdz file and using tmo, getting 3/4g speed. u might want to take a look at it
anduios said:
what version of gb you are running? was it the leak one or the official 21a kdz.
if u flash 21a kdz,file, then its very good chance that tmo 4g baseband already included, because i have o3d (p920) tmo version running 21a kdz and i get 3g/4g speed. as far as i know, thrill lack hardware 1700mhz band and that could be the reason no 3/4g on tmo or simple. however other user (p925) flashing 21a kdz file and using tmo, getting 3/4g speed. u might want to take a look at it
Click to expand...
Click to collapse
Im using the one which was leaked for o3d . I think v21 ?
I had 2G networks only but then i disabed that and restarted my phone thinking the 3G would work but kept getting no network . So im guessing i have to use anofher baseband ? Can someone asisst me further?
Can someone plz tell me how to unlock my similar so I can use my phone
gunem said:
Can someone plz tell me how to unlock my similar so I can use my phone
Click to expand...
Click to collapse
I paid 15.00 and got it unlocked at unlockthatphone.com i cant remember if its .com just google it and you will find it.
Demonface said:
Im using the one which was leaked for o3d . I think v21 ?
I had 2G networks only but then i disabed that and restarted my phone thinking the 3G would work but kept getting no network . So im guessing i have to use anofher baseband ? Can someone asisst me further?
Click to expand...
Click to collapse
if you upgrade gb v21a kdz on this link
http://forum.xda-developers.com/showthread.php?t=1287236
then i think the tmo baseband is in there. not 100% sure, but that is the link that i upgraded my o3d and i am able to get 3/4g signal.
there is limitation, p925 technically lacks 1700mhz. radio band that uses for tmo 3/4g signal.
you can check more on this thread similar topic
http://forum.xda-developers.com/showthread.php?t=1316554
anduios said:
if you upgrade gb v21a kdz on this link
http://forum.xda-developers.com/showthread.php?t=1287236
then i think the tmo baseband is in there. not 100% sure, but that is the link that i upgraded my o3d and i am able to get 3/4g signal.
there is limitation, p925 technically lacks 1700mhz. radio band that uses for tmo 3/4g signal.
you can check more on this thread similar topic
http://forum.xda-developers.com/showthread.php?t=1316554
Click to expand...
Click to collapse
I did that and when i go into settings it says Optimus 3D as my device now. So shouldn't my 3G work ?
Demonface said:
I did that and when i go into settings it says Optimus 3D as my device now. So shouldn't my 3G work ?
Click to expand...
Click to collapse
i feel you
p925 does not have hardware tmo 4g radio anntena inside (1700mhz). that is the reason probably why no 3/4g eventhough the sofware baseband is present. and about the phone under setting, it said so because the rom is build base on o3d. it can be changed to anything with editor and root
here is p925 specs
http://www.gsmarena.com/lg_thrill_4g-3886.php
i don't know if there is any other way around. i am sorry about 3/4g data
anduios said:
i feel you
p925 does not have hardware tmo 4g radio anntena inside (1700mhz). that is the reason probably why no 3/4g eventhough the sofware baseband is present. and about the phone under setting, it said so because the rom is build base on o3d. it can be changed to anything with editor and root
here is p925 specs
http://www.gsmarena.com/lg_thrill_4g-3886.php
i don't know if there is any other way around. i am sorry about 3/4g data
Click to expand...
Click to collapse
i got the 3G to show but after a while it goes away and it stays at No Network. any solution?
what happens if you flash unlocked AT&T LG Thrill 4G with froyo to official V21A_00.kdz ? Do I lose the unlock?
UPDATE: It worked and I see 3G appearing on my display with t-mobile
[/COLOR]
berkserk said:
what happens if you flash unlocked AT&T LG Thrill 4G with froyo to official V21A_00.kdz ? Do I lose the unlock?
UPDATE: It worked and I see 3G appearing on my display with t-mobile
Click to expand...
Click to collapse
Did you flash AT&T Thrill 4G Froyo baseband to V21A?
Can you be little more specific on what you did?
How did it change your phone? Did anything get improved?
I followed the steps for updating P920 to official V21A_00.kdz and it worked for P925 as well.
It improved in the sense that know I have FM radio app working and also I get 3G signal with T-Mobile, and also I get rid of At&t apps which do not work on T-Mobile.
I flashed Acura's rom on the O3D thread after flashing the GB kdz and now I'm getting 4g speeds on T-Mobile.
Sent from my GT-P7510 using Tapatalk
berkserk said:
what happens if you flash unlocked AT&T LG Thrill 4G with froyo to official V21A_00.kdz ? Do I lose the unlock?
UPDATE: It worked and I see 3G appearing on my display with t-mobile
Click to expand...
Click to collapse
Good morning. I'm currently in possession of a rooted Lg Thrill. I am trying to flash the phone to a t-mobile base band as well. I'm curious did you root the phone and flash? Or did you download the foyo update and flash? Any help would be appreciated. Thank you!
Thecookieman said:
Good morning. I'm currently in possession of a rooted Lg Thrill. I am trying to flash the phone to a t-mobile base band as well. I'm curious did you root the phone and flash? Or did you download the foyo update and flash? Any help would be appreciated. Thank you!
Click to expand...
Click to collapse
I first flashed it then I rooted it and then it was good. But if it goes into bootloop you would have to go into CWM and reset it and it will work perfectly.
berkserk said:
I followed the steps for updating P920 to official V21A_00.kdz and it worked for P925 as well.
It improved in the sense that know I have FM radio app working and also I get 3G signal with T-Mobile, and also I get rid of At&t apps which do not work on T-Mobile.
Click to expand...
Click to collapse
So if I understand you correctly you have thrill 4g 3D(p925)
you flashed the 21a_00.kdz and now you have 3G on Tmobile?
Please share your steps to accomplish all of this
After getting much needed help, my daughter's thrill is now enjoying tmobile's 4g network, and she can now watch youtube, no buffering, netflix no buffering. Thanks to the dark lestat
latinohot said:
So if I understand you correctly you have thrill 4g 3D(p925)
you flashed the 21a_00.kdz and now you have 3G on Tmobile?
Please share your steps to accomplish all of this
After getting much needed help, my daughter's thrill is now enjoying tmobile's 4g network, and she can now watch youtube, no buffering, netflix no buffering. Thanks to the dark lestat
Click to expand...
Click to collapse
are you saying that an att thrill phone can be used on simple mobile and get 4g by this method?
goog question, my dad has simple mobile and my daughter I have her thrill on T-mobile
after flashing BB my daughter's thrill gets very impressive speeds 7mbps down and 2.5+up, I will try my dad's simple mobile sim card on my daughter's thrill and see if infact is capable of receiving 3G speeds at least.
FANTASTIC
I see I'm not crazy so this can be done, I need the tutorial on how to do this PLEASE!! I've been searching for this for weeks and I'm sick and tired of edge, I need my 3 or 4g speeds! Please give me the link on how to do this and please make sure that all the steps are there. Many tutorials assume you know certain steps I need ALL OF THEM!! Thank you to all.
So I flashed my ME863 to a brazilian retail XT860 rom in order to install CM9 in safestrap. However I lost my connection, no gsm. I discovered too that when I choose a radio mode in the menus, it auto selects the next one instead of the one I chose (not sure how to explain, maybe a bug?). I tried to flash willis11's old data patch aswell, but then the phone would get stuck at the CM9 bootup screen. Any suggestions?
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
LaZiODROID said:
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
Click to expand...
Click to collapse
Tried it with the 'new' patch too. Same result. Thought the kexec cm9 had gsm umts native support?
Is the new one you tried the one from here http://dl.hash-of-codes.com/ROMs/solana/cm9/ ?
Sent from my DROID BIONIC using Tapatalk 2
linuxgator said:
Is the new one you tried the one from here
Sent from my DROID BIONIC using Tapatalk 2
Click to expand...
Click to collapse
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Steamed_Egg said:
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Click to expand...
Click to collapse
Your ME863, is it from Asia region like Hong Kong or Taiwan??
Is the signal greatly improved after flashing to Brazilian Rom?
I have an ME863 from Hong Kong and signal strength is very disappointing. Afraid to flash it to Brazilian Rom and bricking it.
Hope you can enlight me pls. Thanks
The two bars thing is a bug indeed.
i have been having problems with low wifi signal. where my wifes atrix hd has full signal mine would have one dot on the signal guage. Is there a setting or something i'm missing. Any help would be appreciated and thanks in advance.
Which rom are you using? Same rom on both phones?
I find the wifi be be a little better and more stable on a stock rom.
audit13 said:
Which rom are you using? Same rom on both phones?
I find the wifi be be a little better and more stable on a stock rom.
Click to expand...
Click to collapse
I reverted back to stock no change wifi still sucks.
She is on cm rc rom has great wifi signal
jasongreg said:
I reverted back to stock no change wifi still sucks.
She is on cm rc rom has great wifi signal
Click to expand...
Click to collapse
You should try out HoloBlur. I get excellent wifi on that rom. It seems much faster and more stable that the cm10.1 and cm10.2 based roms.
Same with holoblur poor wifi
jasongreg said:
Same with holoblur poor wifi
Click to expand...
Click to collapse
Not sure what else to say except maybe it's a hardware issue?
Is there no setting to get more power to receive the signal better
I just discovered my Bluetooth is super weak mabee a foot range what affects Bluetooth and wifi?
jasongreg said:
I just discovered my Bluetooth is super weak mabee a foot range what affects Bluetooth and wifi?
Click to expand...
Click to collapse
Both of these items would be affected by the phone's antenna. I'm not sure that it would help but maybe a different radio would do the trick? I'm not sure if you need an unlocked bootloader or root to install a different radio.
audit13 said:
Both of these items would be affected by the phone's antenna. I'm not sure that it would help but maybe a different radio would do the trick? I'm not sure if you need an unlocked bootloader or root to install a different radio.
Click to expand...
Click to collapse
i am rooted and unlocked my cell reception is great. I have tried flashing stock radio what other radios can i use with atrix hd?
jasongreg said:
i am rooted and unlocked my cell reception is great. I have tried flashing stock radio what other radios can i use with atrix hd?
Click to expand...
Click to collapse
You could try the Mexico retail or Bell Canada radio. I am using the Mexico.
Try the Mexico one
Sent from my MB886 using XDA Premium 4 mobile app
SVLAN said:
Try the Mexico one
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried the mexico modem still no change. I will try the bell modem tonight.
the modem is NON-HLOS.bin right?
Att stock modem, mexico. And bell all no help
jasongreg said:
Att stock modem, mexico. And bell all no help
Click to expand...
Click to collapse
Maybe there is a hardware defect in your phone. Sounds like you tried all reasonable solutions.
Is there a internal antenna that could have jard loose?