i have been having problems with low wifi signal. where my wifes atrix hd has full signal mine would have one dot on the signal guage. Is there a setting or something i'm missing. Any help would be appreciated and thanks in advance.
Which rom are you using? Same rom on both phones?
I find the wifi be be a little better and more stable on a stock rom.
audit13 said:
Which rom are you using? Same rom on both phones?
I find the wifi be be a little better and more stable on a stock rom.
Click to expand...
Click to collapse
I reverted back to stock no change wifi still sucks.
She is on cm rc rom has great wifi signal
jasongreg said:
I reverted back to stock no change wifi still sucks.
She is on cm rc rom has great wifi signal
Click to expand...
Click to collapse
You should try out HoloBlur. I get excellent wifi on that rom. It seems much faster and more stable that the cm10.1 and cm10.2 based roms.
Same with holoblur poor wifi
jasongreg said:
Same with holoblur poor wifi
Click to expand...
Click to collapse
Not sure what else to say except maybe it's a hardware issue?
Is there no setting to get more power to receive the signal better
I just discovered my Bluetooth is super weak mabee a foot range what affects Bluetooth and wifi?
jasongreg said:
I just discovered my Bluetooth is super weak mabee a foot range what affects Bluetooth and wifi?
Click to expand...
Click to collapse
Both of these items would be affected by the phone's antenna. I'm not sure that it would help but maybe a different radio would do the trick? I'm not sure if you need an unlocked bootloader or root to install a different radio.
audit13 said:
Both of these items would be affected by the phone's antenna. I'm not sure that it would help but maybe a different radio would do the trick? I'm not sure if you need an unlocked bootloader or root to install a different radio.
Click to expand...
Click to collapse
i am rooted and unlocked my cell reception is great. I have tried flashing stock radio what other radios can i use with atrix hd?
jasongreg said:
i am rooted and unlocked my cell reception is great. I have tried flashing stock radio what other radios can i use with atrix hd?
Click to expand...
Click to collapse
You could try the Mexico retail or Bell Canada radio. I am using the Mexico.
Try the Mexico one
Sent from my MB886 using XDA Premium 4 mobile app
SVLAN said:
Try the Mexico one
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried the mexico modem still no change. I will try the bell modem tonight.
the modem is NON-HLOS.bin right?
Att stock modem, mexico. And bell all no help
jasongreg said:
Att stock modem, mexico. And bell all no help
Click to expand...
Click to collapse
Maybe there is a hardware defect in your phone. Sounds like you tried all reasonable solutions.
Is there a internal antenna that could have jard loose?
Related
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
guidojusto said:
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I see. So I'm not the only one not having HSPA in Argentina.
I only have the Retail Brazil and the Telstra one that dew.man uploaded some time ago.
The 4.2.1.1 radio kills the signal almost completely, so I deleted it. I can rebuild it if you want, but I don't see the point.
Currently the best radio seems to be the 4.1.8.3 one.
I hope this HSPA issue will be solved with Gingerbread.
What other radio do you want?. I can make you one with the Claro Brasil radio.
Whipon said:
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Click to expand...
Click to collapse
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Rayan said:
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
jorge_moran_jams said:
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
jorge_moran_jams said:
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Rayan said:
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
If I for example, say I'm using the 4.1.8.3 radio, that means I'm using the stock radio of that firmware. Its obvious. Build numbers are easier to remember.
ytwytw said:
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Click to expand...
Click to collapse
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Whipon said:
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Click to expand...
Click to collapse
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
alex_herrero said:
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Click to expand...
Click to collapse
I will try changing the sim card because it looks a little old and haven't changed it for 4 years. Maybe it's time and also it's my last option
Enviado desde mi MB860 usando XDA Premium App
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
Exactly, thats what I've been saying for the last three posts, but some ppl just dont get it.
Thats a good point by the way!
Sent from my Atrix using Tapatalk
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
Click to expand...
Click to collapse
I will talk the way I want. If someone is so stupid to think I'm talking about flashing a full sbf its not my problem
ytwytw said:
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
First, the radio only SBF some posts above doesn't work on an AT&T Atrix. Period.
It uses diferent ram downloaders incompatible with the AT&T one.
If you try to flash it, you'll get an error in both the phone and RSD Lite.
Second, knowing this, I would like to know how these "lots of people" tested the radio not having a working sbf to flash it. I've tested it, making a working SBF myself and all ended with the results I described. I can upload the SBF if anyone is willing to test it.
josuetenista said:
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
Click to expand...
Click to collapse
You said that you have tried all those radios?
Do you know where I can download N_01.77.15P?
I "upgraded" to N_01.87.00R thinking that it would be better, but no. I think N_01.77.15P offers better performance.
Thanks!
Rayan
So I flashed my ME863 to a brazilian retail XT860 rom in order to install CM9 in safestrap. However I lost my connection, no gsm. I discovered too that when I choose a radio mode in the menus, it auto selects the next one instead of the one I chose (not sure how to explain, maybe a bug?). I tried to flash willis11's old data patch aswell, but then the phone would get stuck at the CM9 bootup screen. Any suggestions?
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
LaZiODROID said:
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
Click to expand...
Click to collapse
Tried it with the 'new' patch too. Same result. Thought the kexec cm9 had gsm umts native support?
Is the new one you tried the one from here http://dl.hash-of-codes.com/ROMs/solana/cm9/ ?
Sent from my DROID BIONIC using Tapatalk 2
linuxgator said:
Is the new one you tried the one from here
Sent from my DROID BIONIC using Tapatalk 2
Click to expand...
Click to collapse
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Steamed_Egg said:
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Click to expand...
Click to collapse
Your ME863, is it from Asia region like Hong Kong or Taiwan??
Is the signal greatly improved after flashing to Brazilian Rom?
I have an ME863 from Hong Kong and signal strength is very disappointing. Afraid to flash it to Brazilian Rom and bricking it.
Hope you can enlight me pls. Thanks
The two bars thing is a bug indeed.
Hi I have as listed above a samsung galaxy s3 lte i9305 does anyone no where I can download a jellybean 4.2.2 rom all the ones I have tried dont work on the ee network
There's NO JB 4.2.2 for i9305!
If you want, try CM based ROMs.
What you mean by "all rom's I've tried doesn't work on EE"??
djembey said:
There's NO JB 4.2.2 for i9305!
If you want, try CM based ROMs.
What you mean by "all rom's I've tried doesn't work on EE"??
Click to expand...
Click to collapse
Sorry I mean ive tried custom roms out like cyanogenmod and it installs fine but when I go to select my network (ee uk) its not in the list so im a bit lost atm
millsyman22 said:
Sorry I mean ive tried custom roms out like cyanogenmod and it installs fine but when I go to select my network (ee uk) its not in the list so im a bit lost atm
Click to expand...
Click to collapse
Probably wrong modem wrong CSC read the faqs and guides before flashing .
jje
HI. I am in the UK, on EE, have an i9305 (Galaxy 3 LTE) and have tried a few different ROMS and have had absolutely no problems on 4.2.2.
I tried the Supreme ROM 4.1.2, but upgraded to the LiquidSmooth ROM 4.2.2, v2.2 (STABLE) and have had absolutely no issues. In fact, I would recommend it to anyone.
Why do you go in and select the Carrier? Whenever I have flashed a ROM, it has automatically selected EE as the carrier. Is your phone unlocked?
Don't know what's wrong with your situation. Are you wiping properly before installing each ROM? Are you installing Gapps with each ROM?
ianrobbie said:
HI. I am in the UK, on EE, have an i9305 (Galaxy 3 LTE) and have tried a few different ROMS and have had absolutely no problems on 4.2.2.
I tried the Supreme ROM 4.1.2, but upgraded to the LiquidSmooth ROM 4.2.2, v2.2 (STABLE) and have had absolutely no issues. In fact, I would recommend it to anyone.
Why do you go in and select the Carrier? Whenever I have flashed a ROM, it has automatically selected EE as the carrier. Is your phone unlocked?
Don't know what's wrong with your situation. Are you wiping properly before installing each ROM? Are you installing Gapps with each ROM?
Click to expand...
Click to collapse
Hi yes im wiping data and also installing gapps I dont no if my phones unlocked does that matter ive tried the luquidsmooth and I get tmobile network and theres no list for ee if I need to unlock my phone how do I do that and where did you get your liquidsmooth rom from please
If you're getting the T-Mobile network, you don't need to unlock your phone. You can try out various websites like HTC-Codes for a paid code to unlock your phone. There is also a free option, but it's a bit involved and relies on your phone being on 4.1.2 firmware. URLs are -
http://forum.xda-developers.com/showthread.php?t=2014982 to unlock the phone (Read the whole OP)
I got Liquidsmooth from - http://forum.xda-developers.com/showthread.php?t=2149746
Hope this helps
enjoyed czonoen
ianrobbie said:
If you're getting the T-Mobile network, you don't need to unlock your phone. You can try out various websites like HTC-Codes for a paid code to unlock your phone. There is also a free option, but it's a bit involved and relies on your phone being on 4.1.2 firmware. URLs are -
http://forum.xda-developers.com/showthread.php?t=2014982 to unlock the phone (Read the whole OP)
I got Liquidsmooth from - http://forum.xda-developers.com/showthread.php?t=2149746
Hope this helps
Click to expand...
Click to collapse
Hi I am on 4.1.2 so I dont need to unlock to run a custom 4.2.2 rom so the link you have given me will work on my ee network s3 ?
millsyman22 said:
Hi I am on 4.1.2 so I dont need to unlock to run a custom 4.2.2 rom so the link you have given me will work on my ee network s3 ?
Click to expand...
Click to collapse
hi checked your link out for the rom an it says its not found
No need for 4.2.2, I have an i9305 on EE in uk and have been using rExreme ROM (4.1.2) for a few weeks now. Great rom for performance, battery and tweaks.
Find it here:
http://forum.xda-developers.com/showthread.php?t=2023916
[ROM][16 Apr][UBBMC1][JB 4.1.2][rXTREME.v8.0] (stable, smooth & fast))
Sent from my GT-I9305T using Tapatalk 2
wildcardspv said:
No need for 4.2.2, I have an i9305 on EE in uk and have been using rExreme ROM (4.1.2) for a few weeks now. Great rom for performance, battery and tweaks.
Find it here:
http://forum.xda-developers.com/showthread.php?t=2023916
[ROM][16 Apr][UBBMC1][JB 4.1.2][rXTREME.v8.0] (stable, smooth & fast))
Sent from my GT-I9305T using Tapatalk 2
Click to expand...
Click to collapse
thanks alot ill try this and see if ee works v8.0 link is down but ill try 7.1 see how it goes
millsyman22 said:
thanks alot ill try this and see if ee works v8.0 link is down but ill try 7.1 see how it goes
Click to expand...
Click to collapse
Nice one.
I've only updated to 8.0 today and was using 7.1 until then. Very happy with this rom.
Hope its good for you
Sent from my GT-I9305T using Tapatalk 2
wildcardspv said:
Nice one.
I've only updated to 8.0 today and was using 7.1 until then. Very happy with this rom.
Hope its good for you
Sent from my GT-I9305T using Tapatalk 2
Click to expand...
Click to collapse
ill let you no in a min just booting up gonna see if im still on ee
millsyman22 said:
ill let you no in a min just booting up gonna see if im still on ee
Click to expand...
Click to collapse
yes mate works a treat thanks so
millsyman22 said:
yes mate works a treat thanks so
Click to expand...
Click to collapse
Enjoy buddy
Sent from my GT-I9305T using Tapatalk 2
wildcardspv said:
Enjoy buddy
Sent from my GT-I9305T using Tapatalk 2
Click to expand...
Click to collapse
ok quick issue its saying its on ee and i have signal however if i take it of wifi i have no data symbol and its not connecting to anything eg fb or internet any ideas
Never had that problem tbh, but make sure data connection is enabled in data usage settings.
Failing that make sure you have the right apns installed in mobile network settings (I'm on orange and have orangeinternet and orangemms). If in doubt, ring them and ask you to send your Internet settings to your phone for you.
Sent from my GT-I9305T using Tapatalk 2
millsyman22 said:
ok quick issue its saying its on ee and i have signal however if i take it of wifi i have no data symbol and its not connecting to anything eg fb or internet any ideas
Click to expand...
Click to collapse
ok ive looked at access point names and it says virgin media mobile internet should it not say ee
Give them a call and have the settings sent to you
Sent from my GT-I9305T using Tapatalk 2
wildcardspv said:
Give them a call and have the settings sent to you
Sent from my GT-I9305T using Tapatalk 2
Click to expand...
Click to collapse
its ok ive looked them up on the net its sorted it thanks again
Hi I purchased a previoisly at&t Atrix HD and its unlocked on my t-mobile account what can i flash?
Any custom ROM.
Sent from my Atrix HD using Tapatalk 4 Beta
chococomaxim said:
Any custom ROM.
Sent from my Atrix HD using Tapatalk 4 Beta
Click to expand...
Click to collapse
no radio issues?
Dozenboy0012 said:
no radio issues?
Click to expand...
Click to collapse
It'll probably depend on the ROM but there might be issues
Sent from my Atrix HD using Tapatalk 4
There seem to be three readily available radios for the AHD: Mexico retail, Bell retail, and ATT retail.
You can try all three and see which works best for you. Flashing a custom rom does not change the radio.
To make things easier for yourself, unlock the bootloader and install CWM. Unlocking the bootloader will void your warranty according to Motorola.
audit13 said:
There seem to be three readily available radios for the AHD: Mexico retail, Bell retail, and ATT retail.
You can try all three and see which works best for you. Flashing a custom rom does not change the radio.
To make things easier for yourself, unlock the bootloader and install CWM. Unlocking the bootloader will void your warranty according to Motorola.
Click to expand...
Click to collapse
thank you will try
I'm using Holoblur with no issues & have 4G LTE coverage in Chicago
I have used the Bell, Stock At&T and Mexican Retail with T-Mo with no issues whatsoever.
To get LTE working you need to set the correct APN search for my post in the HoloBlur ROM
ashoply saw
Currently on holoblur, but i tried a few others like uxylon, cm10.1, beanstalk, PAC, Carbon are all working with 4G LTE (Los Angeles area).
Can't get SLIM and another one.. just can't remember.. they had the same issue of no signal and can't get past the initial screen because of no internet for t-mobile.
Can you flash a radio file from a stock image that isn't for your firmware? In my case, is it okay to flash the radio from a lollipop build on marshmallow without any issues? Thanks! It would have to be a T-Mobile lollipop build if I wanted WiFi calling right?
H4X0R46 said:
Can you flash a radio file from a stock image that isn't for your firmware? In my case, is it okay to flash the radio from a lollipop build on marshmallow without any issues? Thanks! It would have to be a T-Mobile lollipop build if I wanted WiFi calling right?
Click to expand...
Click to collapse
I don't think you should have any issues. Before I was really lazy and never updated my baseband despite changing firmware and never had any issues. You may run into problems with mixing the bootloaders though.
H4X0R46 said:
Can you flash a radio file from a stock image that isn't for your firmware? In my case, is it okay to flash the radio from a lollipop build on marshmallow without any issues? Thanks! It would have to be a T-Mobile lollipop build if I wanted WiFi calling right?
Click to expand...
Click to collapse
you can use any n6 radio on any n6 android version, and you should. use the one that best suits your needs I mean
and all the builds are the same now. they all are tmobile builds.
simms22 said:
you can use any n6 radio on any n6 android version, and you should. use the one that best suits your needs I mean
and all the builds are the same now. they all are tmobile builds.
Click to expand...
Click to collapse
Yea they added wifi calling in marshmallow, to have it if I use a lollipop radio, I would need the T-Mobile version of the radio since those were carrier specific right? I rely on wifi calling where I live, service isn't great at my house, everywhere else in town, just not my house haha
H4X0R46 said:
Yea they added wifi calling in marshmallow, to have it if I use a lollipop radio, I would need the T-Mobile version of the radio since those were carrier specific right? I rely on wifi calling where I live, service isn't great at my house, everywhere else in town, just not my house haha
Click to expand...
Click to collapse
nope. all use the same radios.
simms22 said:
nope. all use the same radios.
Click to expand...
Click to collapse
Awesome! Thanks Simms!
simms22 said:
nope. all use the same radios.
Click to expand...
Click to collapse
Hey Simms, I flashed the radio from the very first nexus image, and no wifi calling lol Just an update, I think I DO need a T-Mobile build lollipop radio Just future reference.
H4X0R46 said:
Hey Simms, I flashed the radio from the very first nexus image, and no wifi calling lol Just an update, I think I DO need a T-Mobile build lollipop radio Just future reference.
Click to expand...
Click to collapse
you're on lollipop? eek!
simms22 said:
you're on lollipop? eek!
Click to expand...
Click to collapse
I'm on marshmallow, just wanted to use an older lollipop radio because the marshmallow one is soooo slow for me haha