ME863 radio CM9 - Motorola Droid 3

So I flashed my ME863 to a brazilian retail XT860 rom in order to install CM9 in safestrap. However I lost my connection, no gsm. I discovered too that when I choose a radio mode in the menus, it auto selects the next one instead of the one I chose (not sure how to explain, maybe a bug?). I tried to flash willis11's old data patch aswell, but then the phone would get stuck at the CM9 bootup screen. Any suggestions?

Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider

LaZiODROID said:
Is it possible the "old" Willis patch you used was made for gingerbread (not ics)?
Sent from my HTC Raider
Click to expand...
Click to collapse
Tried it with the 'new' patch too. Same result. Thought the kexec cm9 had gsm umts native support?

Is the new one you tried the one from here http://dl.hash-of-codes.com/ROMs/solana/cm9/ ?
Sent from my DROID BIONIC using Tapatalk 2

linuxgator said:
Is the new one you tried the one from here
Sent from my DROID BIONIC using Tapatalk 2
Click to expand...
Click to collapse
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?

Steamed_Egg said:
No it wasn't! It was from an old thread I found. Will try to flash it tomorrow. I will report back!
Edit: got radio working, max of 2 radio bars though. I think it's just visual bug?
Click to expand...
Click to collapse
Your ME863, is it from Asia region like Hong Kong or Taiwan??
Is the signal greatly improved after flashing to Brazilian Rom?
I have an ME863 from Hong Kong and signal strength is very disappointing. Afraid to flash it to Brazilian Rom and bricking it.
Hope you can enlight me pls. Thanks

The two bars thing is a bug indeed.

Related

[MOD] Retail Brazil Radio (by request) AT&T Atrix only

Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
guidojusto said:
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I see. So I'm not the only one not having HSPA in Argentina.
I only have the Retail Brazil and the Telstra one that dew.man uploaded some time ago.
The 4.2.1.1 radio kills the signal almost completely, so I deleted it. I can rebuild it if you want, but I don't see the point.
Currently the best radio seems to be the 4.1.8.3 one.
I hope this HSPA issue will be solved with Gingerbread.
What other radio do you want?. I can make you one with the Claro Brasil radio.
Whipon said:
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Click to expand...
Click to collapse
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Rayan said:
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
jorge_moran_jams said:
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
jorge_moran_jams said:
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Rayan said:
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
If I for example, say I'm using the 4.1.8.3 radio, that means I'm using the stock radio of that firmware. Its obvious. Build numbers are easier to remember.
ytwytw said:
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Click to expand...
Click to collapse
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Whipon said:
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Click to expand...
Click to collapse
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
alex_herrero said:
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Click to expand...
Click to collapse
I will try changing the sim card because it looks a little old and haven't changed it for 4 years. Maybe it's time and also it's my last option
Enviado desde mi MB860 usando XDA Premium App
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
Exactly, thats what I've been saying for the last three posts, but some ppl just dont get it.
Thats a good point by the way!
Sent from my Atrix using Tapatalk
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
Click to expand...
Click to collapse
I will talk the way I want. If someone is so stupid to think I'm talking about flashing a full sbf its not my problem
ytwytw said:
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
First, the radio only SBF some posts above doesn't work on an AT&T Atrix. Period.
It uses diferent ram downloaders incompatible with the AT&T one.
If you try to flash it, you'll get an error in both the phone and RSD Lite.
Second, knowing this, I would like to know how these "lots of people" tested the radio not having a working sbf to flash it. I've tested it, making a working SBF myself and all ended with the results I described. I can upload the SBF if anyone is willing to test it.
josuetenista said:
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
Click to expand...
Click to collapse
You said that you have tried all those radios?
Do you know where I can download N_01.77.15P?
I "upgraded" to N_01.87.00R thinking that it would be better, but no. I think N_01.77.15P offers better performance.
Thanks!
Rayan

UMTS not working

Just got my Droid 4 and try to use it with GSM in Germany. I'm on the .212 leak.
However, I have no HSPA/UMTS reception. Not even EDGE. Only GPRS works.
I tried out everything, set it to WCDMA preferred, tried all the build.prop tweaks, nothing helped.
Tried out a different SIM, and I'm sure my APN is set up correctly.
It is not related to my region, my Droid 3 works perfectly here.
I think I have a hardware reception issue, but still hope it is just a configuration.
Any suggestions are highly appreciated.
rweb said:
Just got my Droid 4 and try to use it with GSM in Germany. I'm on the .212 leak.
However, I have no HSPA/UMTS reception. Not even EDGE. Only GPRS works.
I tried out everything, set it to WCDMA preferred, tried all the build.prop tweaks, nothing helped.
Tried out a different SIM, and I'm sure my APN is set up correctly.
It is not related to my region, my Droid 3 works perfectly here.
I think I have a hardware reception issue, but still hope it is just a configuration.
Any suggestions are highly appreciated.
Click to expand...
Click to collapse
I'm not fully sure if the Droid4 has world bands in place. In the "Set GSM/UMTS band" I see only USA Band listed.
Also, do you have your APN setup correctly? Make sure the APN authentication is set properly, that's one of the bigger bugs out there with the new builds. Also, have you tried using a custom ROM?
The Droid 4 for sure has the proper bands for UMTS/HSDPA in Europe. Has to be an APN thing. Hopefully somebody else can shed some light on this, as I am planning to use my Droid 4 in Germany as well in the coming months. I know there is someone from Holland on this forum that has no problem using his Droid 4 there (he is also on one of the latest ICS leaks).
Does the foreign SIM card initiate some type of APN configuration when inserted?
As I said I'm really sure APN is correct, I doublecheckt it a couple of times. I'm also sure it is not an APN problem because data IS working, but only with GPRS. Could try a different ROM, but I doubt it will help, I had this issue both with stock Gingerbread and leaked ICS.
Were you able to get this figured out?
i have also problem to get data, it connects to network but there is no data. :// have tried everything with apn and network settting but no chance..
p.s.: i am on .212 leak
So did something maybe change from ICS build 211 to build 212? Did you guys have any problems on the previous leaks?
i dont know if it works actually with 211.. does anyone know if i downgrade to .211 leak from 212
fatihx said:
i dont know if it works actually with 211.. does anyone know if i downgrade to .211 leak from 212
Click to expand...
Click to collapse
Sure. Over at droidforums, there is a tutorial on how to do it. You have to fastboot GB 19 first, then use the unstick tool with the 211 Kernel, followed by flashing of the 211 ICS leak. I have been doing this every single time going from one leak to the next.
Sent from my DROID4 using Tapatalk 2
GermanGuy said:
Sure. Over at droidforums, there is a tutorial on how to do it. You have to fastboot GB 19 first, then use the unstick tool with the 211 Kernel, followed by flashing of the 211 ICS leak. I have been doing this every single time going from one leak to the next.
Sent from my DROID4 using Tapatalk 2
Click to expand...
Click to collapse
but i mean not upgrade, downgrade..
fatihx said:
but i mean not upgrade, downgrade..
Click to expand...
Click to collapse
Downgrading within the ICS leaks works the same way as upgrading as long as you have the proper leak and kernel.
Do any of you Canadian forum members have difficulty with Data on the latest ICS leaks?
i can confirm that data on .213 leak doesnt work also in germany. i will try .211 later...
could someone send me the build.prop(.211) for compare before i downgrade..
fatihx said:
i can confirm that data on .213 leak doesnt work also in germany. i will try .211 later...
could someone send me the build.prop(.211) for compare before i downgrade..
Click to expand...
Click to collapse
No issues up here in Canada on 213...
Sent from my XT894 running ICS

[Q] HTC Salsa Stock ROM 1.12.401.10 ?

Hi everyone,
I have a HTC Salsa after some issues with logging into google market place I decided to reflash with the following stock Salsa ROM found on XDA:
RUU_Icon_G_HTC_Europe_1.12.401.1_R_Radio_47.14.35.3030H_7.47.35.17_release_193257_signed.exe
The reflash was successful, but my handset shows software version:
1.12.401.1_R
It used to be:
1.12.401.10
Kernel version is also different.
Does anyone have the stock RUU for software version 1.12.401.10?
...or can anyone suggest how to get the system.img file from an existing handset which does have version 1.12.401.10?
Knd Rgds,
yyo
Good luck. Never play with a systeem iimg. What is your area or country.
There will be no way of getting your exact system back. Its damn near impossible. Closest you will get is by flashing a stock rom. But by the sound of it you have a stock unit.
I'm interested in wwhy u would reinstall the ruu to fix a google play error though. But silly lol, nether the less u did it.
If u tell me your country I maybe able to point u in thee right direction more. But as said. U won't get your original stock back again. And your kernel is bound to be different its newer. Ever thought the ruu u tried is newer than what u had?
BigBearEvo is using Xparent tapatalk 2 ICS on CM7
AW: [Q] HTC Salsa Stock ROM 1.12.401.10 ?
Seems to be europe
Sent from my HTC Salsa C510e using xda app-developers app
BigBearEvo said:
Good luck. Never play with a systeem iimg. What is your area or country.
There will be no way of getting your exact system back. Its damn near impossible. Closest you will get is by flashing a stock rom. But by the sound of it you have a stock unit.
I'm interested in wwhy u would reinstall the ruu to fix a google play error though. But silly lol, nether the less u did it.
If u tell me your country I maybe able to point u in thee right direction more. But as said. U won't get your original stock back again. And your kernel is bound to be different its newer. Ever thought the ruu u tried is newer than what u had?
BigBearEvo is using Xparent tapatalk 2 ICS on CM7
Click to expand...
Click to collapse
Hmm..., doesn't sound good.
Unless version 1.12.401.1_R is newer than version 1.12.401.10 the RUU found here at XDA is older than the version shipping with the handset. HTC is guilty of a lot of things but versioning software in reverse is not one I've some across yet!
My handset was purchased in Nov '12 in the UK and I used the Europe Stock RUU to flash, it was the only one with a version code similar to mine.
Any ideas?
KRgds,yyo
yippeeyo said:
Hmm..., doesn't sound good.
Unless version 1.12.401.1_R is newer than version 1.12.401.10 the RUU found here at XDA is older than the version shipping with the handset. HTC is guilty of a lot of things but versioning software in reverse is not one I've some across yet!
My handset was purchased in Nov '12 in the UK and I used the Europe Stock RUU to flash, it was the only one with a version code similar to mine.
Any ideas?
KRgds,yyo
Click to expand...
Click to collapse
yeah flash the O2 UK one found here >http://www.mediafire.com/download.php?n7e11cv3zzop25a this is version 1.18.206.2
regardless of which network your with...the salsa in the uk is primarily O2
version code just means its the shipped version. the newer the code the better the version. you will notice alot of changes in this ruu including the kernel code but do not worry. it is normal.
BigBearEvo said:
yeah flash the O2 UK one found here > this is version 1.18.206.2
regardless of which network your with...the salsa in the uk is primarily O2
version code just means its the shipped version. the newer the code the better the version. you will notice alot of changes in this ruu including the kernel code but do not worry. it is normal.
Click to expand...
Click to collapse
Thanks for the assistance, I bought the handset sim-free (off network) so it was true HTC stock - no additional network provider rubbish.
I'm downloading now and wil give the O2 ROM a bash later on.
I also have an unmolested HTC Salsa running the stock rom 1.12.401.10, is there any way to extract it?
KRgds, yyo
No, u maybe able to when u unlock the bootloader and install reecovery, but swapping img files from roms is dangerous and not recommended.
Although its sim free, all salsas in the uk are predominantly O2. It will work, it'll just have so new options there. My suggestion is get it working and test everything. Wifi data Bluetooth etc.
BigBearEvo is using Xparent tapatalk 2 ICS on CM7
BigBearEvo said:
No, u maybe able to when u unlock the bootloader and install reecovery, but swapping img files from roms is dangerous and not recommended.
Although its sim free, all salsas in the uk are predominantly O2. It will work, it'll just have so new options there. My suggestion is get it working and test everything. Wifi data Bluetooth etc.
BigBearEvo is using Xparent tapatalk 2 ICS on CM7
Click to expand...
Click to collapse
Ok will do, will post results shortly.
Thanks, yyo
AW: [Q] HTC Salsa Stock ROM 1.12.401.10 ?
I got FOTA message with the BBv12 ROM, I don't know what happens when I install that.
Sent from my HTC Salsa C510e using xda app-developers app
Not a lot. U will get these updates in all stock based roms. U can turn of the update Notifier in settings.
It will probably allow u to download it but it won't install. It wwill just freeze out.
BigBearEvo is using Xparent tapatalk 2 ICS on CM7
BigBearEvo said:
Not a lot. U will get these updates in all stock based roms. U can turn of the update Notifier in settings.
It will probably allow u to download it but it won't install. It wwill just freeze out.
BigBearEvo is using Xparent tapatalk 2 ICS on CM7
Click to expand...
Click to collapse
Thanks BigBearEvo all working now, tested the hardware and all looks ok, a number of 'extras' there but I can live with that.
I would note that although the version number is greater, the 02 RUU is dated June 2012 whereas my previous HTC RUU was dated Oct 2012.
Looks like my previous HTC RUU was newer, probably HTC's last update to the Europe RUU before they dropped support for the handset.
Cheers for your help, yyo
anytime lol

Bell Mobility HTC One ... any ROMs I can use?

I am about two years removed from the whole custom ROM scene and am coming back to it with my recent purchase of an HTC One.
I've done some reading but can't really figure out if I can just flash any old ROM in the HTC One forum?
I'd like to also backup my stock firmware and ROM.
Any info and or links one of you might have handy?
/begging
Thanks!
I am using a bell HTC one and I have flashed the latest ARHD and trickdroid Roms with no problem I also flashed the latest radio baseband as detailed in the development section and noticed an improvement in cellular signal. I have seen lte speeds of 40 Mbits up and 30 down.
Sent from my Nexus 7 using Tapatalk 2
Thanks very much for the info!
So I could conceivably flash one of those ROMs without needing to flash the newer firmware?
If I do update the firmware, it needs to be done before the ROM?
Thanks again!
No problem.
As for the firmware...I didn't touch it.
I
1) unlocked bootloader
2) pushed cwm
3) flashed ARHD, tried it then flashed Trickdroid
4) flashed the updated radios (after making a backup)
I think the firmware is really for the international version.
Sent from my HTC One using Tapatalk 2
Ok thanks!
A couple more dumb questions that I hope you can answer for me?
Can I backup the stock ROM/radio and flash back to that at some point (after flashing to a custom ROM/radio)? If so, any place you can point me to read up on the process?
Did you notice an improvement on charge times and battery life with any of the new custom ROMs?
Cheers.
Yes the are instructions in the development section on how to flash and backup the radio.
http://forum.xda-developers.com/showthread.php?t=2245615
[HOW-TO]Flash latest Radio in Recovery
I am not the expert but I think you can perform a nandroid backup of stock Rom from the recovery.
As for charge time I think it didn't change ( still long ) but I do not have any scientific data to back that up. To tell you the truth, I didn't spend much time on stock so I don't know about stock battery life.
Sent from my HTC One using Tapatalk 2
May I ask where are you located. I am in Mississauga and usually only get approx 18 to 20 Mbits using LTE. I am using the very latest Radio by the way 4A.19....
vundava said:
I am using a bell HTC one and I have flashed the latest ARHD and trickdroid Roms with no problem I also flashed the latest radio baseband as detailed in the development section and noticed an improvement in cellular signal. I have seen lte speeds of 40 Mbits up and 30 down.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
HELP
vundava said:
I am using a bell HTC one and I have flashed the latest ARHD and trickdroid Roms with no problem I also flashed the latest radio baseband as detailed in the development section and noticed an improvement in cellular signal. I have seen lte speeds of 40 Mbits up and 30 down.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Hi,
d u have the original backup of bell mobility canada for htc one?
Thank you

[Q] Atrix hd low wifi strength

i have been having problems with low wifi signal. where my wifes atrix hd has full signal mine would have one dot on the signal guage. Is there a setting or something i'm missing. Any help would be appreciated and thanks in advance.
Which rom are you using? Same rom on both phones?
I find the wifi be be a little better and more stable on a stock rom.
audit13 said:
Which rom are you using? Same rom on both phones?
I find the wifi be be a little better and more stable on a stock rom.
Click to expand...
Click to collapse
I reverted back to stock no change wifi still sucks.
She is on cm rc rom has great wifi signal
jasongreg said:
I reverted back to stock no change wifi still sucks.
She is on cm rc rom has great wifi signal
Click to expand...
Click to collapse
You should try out HoloBlur. I get excellent wifi on that rom. It seems much faster and more stable that the cm10.1 and cm10.2 based roms.
Same with holoblur poor wifi
jasongreg said:
Same with holoblur poor wifi
Click to expand...
Click to collapse
Not sure what else to say except maybe it's a hardware issue?
Is there no setting to get more power to receive the signal better
I just discovered my Bluetooth is super weak mabee a foot range what affects Bluetooth and wifi?
jasongreg said:
I just discovered my Bluetooth is super weak mabee a foot range what affects Bluetooth and wifi?
Click to expand...
Click to collapse
Both of these items would be affected by the phone's antenna. I'm not sure that it would help but maybe a different radio would do the trick? I'm not sure if you need an unlocked bootloader or root to install a different radio.
audit13 said:
Both of these items would be affected by the phone's antenna. I'm not sure that it would help but maybe a different radio would do the trick? I'm not sure if you need an unlocked bootloader or root to install a different radio.
Click to expand...
Click to collapse
i am rooted and unlocked my cell reception is great. I have tried flashing stock radio what other radios can i use with atrix hd?
jasongreg said:
i am rooted and unlocked my cell reception is great. I have tried flashing stock radio what other radios can i use with atrix hd?
Click to expand...
Click to collapse
You could try the Mexico retail or Bell Canada radio. I am using the Mexico.
Try the Mexico one
Sent from my MB886 using XDA Premium 4 mobile app
SVLAN said:
Try the Mexico one
Sent from my MB886 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried the mexico modem still no change. I will try the bell modem tonight.
the modem is NON-HLOS.bin right?
Att stock modem, mexico. And bell all no help
jasongreg said:
Att stock modem, mexico. And bell all no help
Click to expand...
Click to collapse
Maybe there is a hardware defect in your phone. Sounds like you tried all reasonable solutions.
Is there a internal antenna that could have jard loose?

Categories

Resources