Hello Guys.
I flashed Tmobile 4.4.3 sbf in my XT1052 europe.
Every is fine but I had signal.
The only solution that I see is flash baseband of sbf eu.
With this I have signal. LMT, 3G, Edge.... Etc.... But I´ll like use the radio original of tmobile ever that possible.
My operator in Spain is Vodafone.
I saw other thread but is no solution for me because, the People was run a simcard of tmobile and I want run rom tmobile sbf in my XT1052 with Vodafone Spain and I can´t it.
Thanks in advance.
Nothing? :/
Enviado desde mi XT1053 mediante Tapatalk
You will probably have to flash a correct radio for your phone.
The TMO phone has LTE bands 2/4/17. Your phone has LTE bands 3/7/20.
mandrsn1 said:
You will probably have to flash a correct radio for your phone.
The TMO phone has LTE bands 2/4/17. Your phone has LTE bands 3/7/20.
Click to expand...
Click to collapse
And prior to that probably adjust build.prop and set the correct APN for your provider.
I don't want LTE because in my region haven't it.
I have radio of rom stock eu. And now I have signal.
I'll think that is possible run with radio of tmobile with 3g or 2g
I flashed patch of kryptonyte and nothing happen for my model.
Have a solution run tmbobile rom with baseband tmobile?
isaakmg said:
I don't want LTE because in my region haven't it.
I have radio of rom stock eu. And now I have signal.
I'll think that is possible run with radio of tmobile with 3g or 2g
I flashed patch of kryptonyte and nothing happen for my model.
Have a solution run tmbobile rom with baseband tmobile?
Click to expand...
Click to collapse
I don't quite understand your situation. Do you have signal but no data transmission or there is no mobile signal at all? In the first case set APN. In the second case something went terrible wrong during flashing. Dirty flash is possible reason what caused impact of two different systems. I assume that you have bootloader unlocked. Go back to stock and make a clean flash.
The answer is very simple. Tmobile stock rom 4.4.2 or 4.4.3 don't work radio with her baseband. Nothing of gsm, 2g or 3g. Nothing of data. WiFi yes.
The only solution is flash radio/baseband of rom eu or uk 4.4.2 for have signal and can make calles, data etc etc.....
I want work with the baseband of tmobile because I think that is better that work for other no original baseband like eu of uk....
Do you understand me now?
Sorry, my english is very poor.
isaakmg said:
The answer is very simple. Tmobile stock rom 4.4.2 or 4.4.3 don't work radio with her baseband. Nothing of gsm, 2g or 3g. Nothing of data. WiFi yes.
The only solution is flash radio/baseband of rom eu or uk 4.4.2 for have signal and can make calles, data etc etc.....
I want work with the baseband of tmobile because I think that is better that work for other no original baseband like eu of uk....
Do you understand me now?
Sorry, my english is very poor.
Click to expand...
Click to collapse
What are you trying to tell me is that US Tmobile Moto x can only work in the USA, what is not exactly true. Partially is correct for LTE but not for gsm or 3g. Tmobile's Moto x supports almost the same gsm or 3g frequencies as any European phone.
piskr said:
What are you trying to tell me is that US Tmobile Moto x can only work in the USA, what is not exactly true. Partially is correct for LTE but not for gsm or 3g. Tmobile's Moto x supports almost the same gsm or 3g frequencies as any European phone.
Click to expand...
Click to collapse
Why don't ran radio tmobile in 2g por 3g for calls and data?
isaakmg said:
Why don't ran radio tmobile in 2g por 3g for calls and data?
Click to expand...
Click to collapse
As I said dirty flash is possible reason. Try to get back original entire system (if you're unlocked) and this time totally follow the instructions.
I have unlocker version.
Flash total clean with adb....
Nothing of signal.....
Enviado desde mi XT1053 mediante Tapatalk
He says that he flashed XT1053 4.4.3 to EU version XT1052 and had no cell signal.
This is normal. You won't get signal on XT1052 when running on XT1053 modem firmware.
I did the same thing some time ago but the other way. I flashed XT1052 firmware to my XT1053 to get more EU languages. But I had to flash XT1053 modern files to get it working.
Why are you insisting on running XT1053 modem firmware on XT1052?
Sent from my XT1053 using Tapatalk
ujoty said:
He says that he flashed XT1053 4.4.3 to EU version XT1052 and had no cell signal.
This is normal. You won't get signal on XT1052 when running on XT1053 modem firmware.
I did the same thing some time ago but the other way. I flashed XT1052 firmware to my XT1053 to get more EU languages. But I had to flash XT1053 modern files to get it working.
Why are you insisting on running XT1053 modem firmware on XT1052?
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
Because in general the works most fine....
Related
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
guidojusto said:
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I see. So I'm not the only one not having HSPA in Argentina.
I only have the Retail Brazil and the Telstra one that dew.man uploaded some time ago.
The 4.2.1.1 radio kills the signal almost completely, so I deleted it. I can rebuild it if you want, but I don't see the point.
Currently the best radio seems to be the 4.1.8.3 one.
I hope this HSPA issue will be solved with Gingerbread.
What other radio do you want?. I can make you one with the Claro Brasil radio.
Whipon said:
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Click to expand...
Click to collapse
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Rayan said:
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
jorge_moran_jams said:
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
jorge_moran_jams said:
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Rayan said:
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
If I for example, say I'm using the 4.1.8.3 radio, that means I'm using the stock radio of that firmware. Its obvious. Build numbers are easier to remember.
ytwytw said:
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Click to expand...
Click to collapse
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Whipon said:
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Click to expand...
Click to collapse
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
alex_herrero said:
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Click to expand...
Click to collapse
I will try changing the sim card because it looks a little old and haven't changed it for 4 years. Maybe it's time and also it's my last option
Enviado desde mi MB860 usando XDA Premium App
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
Exactly, thats what I've been saying for the last three posts, but some ppl just dont get it.
Thats a good point by the way!
Sent from my Atrix using Tapatalk
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
Click to expand...
Click to collapse
I will talk the way I want. If someone is so stupid to think I'm talking about flashing a full sbf its not my problem
ytwytw said:
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
First, the radio only SBF some posts above doesn't work on an AT&T Atrix. Period.
It uses diferent ram downloaders incompatible with the AT&T one.
If you try to flash it, you'll get an error in both the phone and RSD Lite.
Second, knowing this, I would like to know how these "lots of people" tested the radio not having a working sbf to flash it. I've tested it, making a working SBF myself and all ended with the results I described. I can upload the SBF if anyone is willing to test it.
josuetenista said:
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
Click to expand...
Click to collapse
You said that you have tried all those radios?
Do you know where I can download N_01.77.15P?
I "upgraded" to N_01.87.00R thinking that it would be better, but no. I think N_01.77.15P offers better performance.
Thanks!
Rayan
UNLOCKED BOOTLOADER ONLY!!!
Well i wrote this post because many users are having problem upgrading the HD to Jelly Bean, there are simple steps to having a 100% working JB Phone!!!
1. download the JB firmware from Telstra Full from here http://sbf.droid-developers.org/van...A028.0R_LSAVNQJBTELSTRA_P010_A010_CFC.xml.zip or from Firmware thread!
THANKS TO FIRMWARE TEAM!
I like the Telstra one because Orange and SFR have many battery issues.
2. download the modem_signed file of your operator, U can find it on your Firmware file ICS, In this case were gonna use the Telcel Mexico one (is very important to use the correct one, because in each region LTE works in different freq.
Also u have to extract the fsg_signed file too.
Telcel Modem_Signed https://www.box.com/s/dp2aj3v8odeu65yqkr2x
Rogers Modem_Signed https://www.box.com/s/i2qnaauvc0pd3xmn23mg
AGAIN THANKS TO FIRMWARE TEAM!
3. download the .xml edited: https://www.box.com/s/ylydzzjs79ynmj1vbdm3 This file works for everyone, its just an edited file to run the rsd lite without GETVAR error.
4. with the Telstra firm downloaded double click on it and open with WinRar and Replace the .xml, the fsg_signed and modem_signed files.
5. and thats it! u have a fully functional SBF file to start flashing with RSD Lite.
Btw here u can find the latest drivers.... https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
any issue im here to support u!!!
Thanks for this! I really needed a tut, can't believe telcel hasn't released jb for our devices u.u
Sent from my XT925
Royalfox said:
Thanks for this! I really needed a tut, can't believe telcel hasn't released jb for our devices u.u
Sent from my XT925
Click to expand...
Click to collapse
The official JB release comes to telcel in lately January or February.
dashiell.cano said:
The official JB release comes to telcel in lately January or February.
Click to expand...
Click to collapse
Can't wait lol.
How do I flash with RSD Lite? And how can I keep root?
Sent from my XT925
dashiell.cano said:
UNLOCKED BOOTLOADER ONLY!!!
Well i wrote this post because many users are having problem upgrading the HD to Jelly Bean, there are simple steps to having a 100% working JB Phone!!!
1. download the JB firmware from Telstra Full from here http://sbf.droid-developers.org/van...A028.0R_LSAVNQJBTELSTRA_P010_A010_CFC.xml.zip or from Firmware thread!
I like the Telstra one cause Orange and SFR have many battery issues.
2. download the modem_signed file of your operator, U can find it on your Firmware file ICS, In this case were gonna use the Telcel Mexico one (is very important to use the correct one, because in each region LTE works in different freq.
Telcel Modem_Signed https://www.box.com/s/dp2aj3v8odeu65yqkr2x
3. download the .xml edited: https://www.box.com/s/ylydzzjs79ynmj1vbdm3 This file works for everyone, its just an edited file to run the rsd lite without GETVAR error.
4. with the Telstra firm downloaded double click on it and open with WinRar and Replace the .xml and modem_signed files.
5. and thats it! u have a fully functional SBF file to start flashing with RSD Lite.
any issue im here to support u!!!
Click to expand...
Click to collapse
Little question ... Telstra don't support LTE ?
I have installed the full Telstra without Rogers modem ... because i am not in lte zone for the moment ... i really prefer the telstra modem version ! More stable in HSPA and better signal/speed for me on The canadian Telus Carrier Than the Original Rogers modem on ics ! just no test in lte ...
Royalfox said:
Can't wait lol.
How do I flash with RSD Lite? And how can I keep root?
Sent from my XT925
Click to expand...
Click to collapse
download and install rsd lite Version 6.1.4 and the drivers from Motorola support website, conect ur phone, select the sbf file that u create in Filename and click on start! easy!!!
if u have problems add me in whatsapp +524423599702
cedqc418 said:
Little question ... Telstra don't support LTE ?
I have installed the full Telstra without Rogers modem ... because i am not in lte zone for the moment ... i really prefer the telstra modem version ! More stable in HSPA and better signal/speed for me on The canadian Telus Carrier Than the Original Rogers modem on ics ! just no test in lte ...
Click to expand...
Click to collapse
YES, Telstra support LTE but LTE have different freqs and sometimes one doesnt work in another country, ex. In Mexico And Canada we have the same freq, but in Brazil and US we cant have LTE working! the modem_signed from Telstra could work in ur country but maybe not, better u replace the file and u gonna have a fully working Firm!
Please Credits Firmware Team, thanks
Enviado desde mi XT925 usando Tapatalk 2
Pzyduck said:
Please Credits Firmware Team, thanks
Enviado desde mi XT925 usando Tapatalk 2
Click to expand...
Click to collapse
Yeah youre right! .... post edited!
*Sent from my Razr G*
on rogers tried with rogers modem. everything works except lte.
Sent from my XT925 using Tapatalk 2
Did u check the network config?
*Sent from my Razr G*
Just test on telus ( with the rogers phone full flashed to telstra firmware... no need to flash rogers radio ) LTE work great without any problem... in QC City area...
i will try in the next hours with a rogers lte micro sim card
dashiell.cano said:
Did u check the network config?
*Sent from my Razr G*
Click to expand...
Click to collapse
Sorry i meant i'm on Fido but with Rogers Modem, I checked network config. everything was correct but no LTE. was getting 3G speeds.
I also tried the Telstra Modem, no LTE but 3g works. Maybe others will have better luck then me.
Rogers LTE
Krizid said:
Sorry i meant i'm on Fido but with Rogers Modem, I checked network config. everything was correct but no LTE. was getting 3G speeds.
I also tried the Telstra Modem, no LTE but 3g works. Maybe others will have better luck then me.
Click to expand...
Click to collapse
Im having the same problems. Im using The Telstra Full with the rogerss modem and I cant get LTE, only HPDSA. Its quite fast, about 8mbps down but no LTE
I double checked all my APN settings from the Rogers website.
My Rogers XT925 phone work great in lte with telstra full flash with rogers and telus !
But a friend have a problem like you ...
Download http://forum.xda-developers.com/showthread.php?t=1943879
Telcel Mexico... get the radio files ... flash it ...
Now my friend have LTE
This is really werd
cedqc418 said:
My Rogers XT925 phone work great in lte with telstra full flash with rogers and telus !
But a friend have a problem like you ...
Download http://forum.xda-developers.com/showthread.php?t=1943879
Telcel Mexico... get the radio files ... flash it ...
Now my friend have LTE
This is really werd
Click to expand...
Click to collapse
So weird! Some friends are having the LTE issue and when they replace the modem signed with one totally different the LTE back to work! Dont know why!
*Sent from my Razr G*
Telstra with Mexico Modem..still no LTE
dashiell.cano said:
So weird! Some friends are having the LTE issue and when they replace the modem signed with one totally different the LTE back to work! Dont know why!
*Sent from my Razr G*
Click to expand...
Click to collapse
I tried using the Telstra full with the mexico modem. still no LTE on Rogers (BC) in the mobile settings, only 2g/3g/4g is offered, no LTE
ill try to put links to each modem from each region, and a easy way to flash it without lose anything, just waaaaait!
AdamMarkTodd said:
I tried using the Telstra full with the mexico modem. still no LTE on Rogers (BC) in the mobile settings, only 2g/3g/4g is offered, no LTE
Click to expand...
Click to collapse
Lol i have found you problem ... i thing ... 4G icon is LTE ... on telstra firwmware !!! there are no LTE icon !!!! 4G is LTE !
---------- Post added at 03:27 PM ---------- Previous post was at 03:22 PM ----------
http://techau.tv/blog/images/Motorola-and-Telstra-Announce_D5F4/IMG_0997.jpg
Check the phone at the left ... is connected to LTE ;p
dashiell.cano : Add this détails on the first post ;p !
Fixed it
cedqc418 said:
Lol i have found you problem ... i thing ... 4G icon is LTE ... on telstra firwmware !!! there are no LTE icon !!!! 4G is LTE !
---------- Post added at 03:27 PM ---------- Previous post was at 03:22 PM ----------
Check the phone at the left ... is connected to LTE ;p
dashiell.cano : Add this détails on the first post ;p !
Click to expand...
Click to collapse
Your half right! before I was getting only HSDPA+. I flashed the Rogers Modem signed AND fsg_signed. Then It all of a sudden started working on 4G (which I now know is actually LTE)
I had to enter MCC and the MNC to have 4G work. I found then on wiki
Hello dear friends, Ive been wondering if it's possible that I flash a XT1053 (also D.E.) firmware onto my XT1060 Verizon D.E. and it would become a XT1053 handset for use on GSM networks? Sorry in advance if my question is too silly, but I have searched much for a week now without no any clear answer. Thank you very much too pay attention to my question?
You probably can, but you would get no service since the Verizon Version es CDMA and the XT1053 Version is GSM. But I think I heard that if you edit the Build.prop lines you can probably get service. Also this shouldn't go in the Development Forum, you should move this to the Q&A Forum.
Sent from my XT1053
Maybe if u edit the .xml to avoid flash the modem
Enviado desde mi XT1058 mediante Tapatalk
flusshd said:
Hello dear friends, Ive been wondering if it's possible that I flash a XT1053 (also D.E.) firmware onto my XT1060 Verizon D.E. and it would become a XT1053 handset for use on GSM networks? Sorry in advance if my question is too silly, but I have searched much for a week now without no any clear answer. Thank you very much too pay attention to my question?
Click to expand...
Click to collapse
You can definitely flash foreign builds onto the XT1060 Dev Edition. I was in fact running the German build of 4.4.2 on my XT1060 because there is no bloat to mess with. I've switched to the T-Mo 4.4.2 build now so I can use faux kernel but thats beside the point. I have no problem using these builds on Verizon's network as long as I have LTE/CDMA selected as the network mode (instead of LTE/GSM).
BUT
You can only flash system, boot, and motoboot to my knowledge. I haven't flashed any of the others because I haven't wanted to take the chance and have to spend time fixing it if something goes wrong. If you know how to use fastboot to flash specific files then you're golden.
If you want to use your XT1060 on GSM networks, then flashing system, boot, and motoboot from a T-Mo or foreign build will help you in that department. The VZW firmware doesn't have a lot of options for GSM networks (network modes, APN settings etc.) but the GSM builds do.
jp1044 said:
You can definitely flash foreign builds onto the XT1060 Dev Edition. I was in fact running the German build of 4.4.2 on my XT1060 because there is no bloat to mess with. I've switched to the T-Mo 4.4.2 build now so I can use faux kernel but thats beside the point. I have no problem using these builds on Verizon's network as long as I have LTE/CDMA selected as the network mode (instead of LTE/GSM).
BUT
You can only flash system, boot, and motoboot to my knowledge. I haven't flashed any of the others because I haven't wanted to take the chance and have to spend time fixing it if something goes wrong. If you know how to use fastboot to flash specific files then you're golden.
If you want to use your XT1060 on GSM networks, then flashing system, boot, and motoboot from a T-Mo or foreign build will help you in that department. The VZW firmware doesn't have a lot of options for GSM networks (network modes, APN settings etc.) but the GSM builds do.
Click to expand...
Click to collapse
Thank you guys!
These info are surely helpful to me. As for my case, I'm going to receive a Verizon Moto X Xt1060 from my brother, but my network in here (outside of US) is GSM. Though my brother told me Verizon Moto X is a dual network handset and it supports GSM carriers, but through searching I read that it's right that it is able to work on GSM networks but not fully, especially 4G LTE and some other value-added services. Well, the only two things I need to be clear is whether XT1060 works perfectly in voice calls, 4G LTE, sms, mms... and other GSM stuff. A friend told me that by flashing a XT1053 firmware which is original GSM, my phone would become full GSM handset, no longer Verizon or any CDMA at all.
Well, anyone else please confirm this for me? Any dear friend have been using XT1060 with identical issue as my case? Many thanks again.
can someone make a guide for flashing foreign builds on different variants will be highly appreciated :good:
I would assume the the only difference would be the radios.
Has anyone tried this?
APNs?
I am not sure since i am italian and i do not know which kind of radios ATT uses...
But i can say that i have a XT1053 Moto X, with the latest SBF from the EUropean Moto X (sold in italian stores).
It works very well but the radio (NO IMEI, no signal....ok the wifi though)
For this reason i am forced to use an american radio (now the Verizon one, because the T-Mobile never released its 4.4.4)
Could be the same for you, if ATT has completely different kind of radio frequencies?
knitler said:
I would assume the the only difference would be the radios.
Has anyone tried this?
Click to expand...
Click to collapse
Strings in the build.prop could impact its usability. The modem files support different frequencies (I'm not sure about the radio hardware itself)
But why would you want to flash the ATT ROM on an XT1053? The XT1053 ROM has way less bloat.
Unless you are trying to use an XT1053 on ATT and you WANT or Need that bloat??
OK so I have the xt1050 variant, bootloader unlocked. LTE isn't fully supported on the GSM side of the phone and no CDMA carriers in my area will activate the phone, the only one that would doesn't exist anymore. I was wondering if I could flash the modem from another variant, could I use LTE on GSM? Or will it mess everything up? If I can do so, which variant do I need to take the NON-HLOS.bin from?
My device info=
My original OS: Android 4.4.2.
My original system version: 161.44.31.ghost_row.
ACG.en.US
Bootloader: 30.B4
Current OS: cm13 nightly 9/21
Another thing, will flashing/updating modem fix the speakerphone bug? Not sure where that comes in but I was reading the forums and saw that it would but I would have to update my bootloader also, and I can't ?
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
OK so I have the xt1050 variant, bootloader unlocked. LTE isn't fully supported on the GSM side of the phone and no CDMA carriers in my area will activate the phone, the only one that would doesn't exist anymore. I was wondering if I could flash the modem from another variant, could I use LTE on GSM? Or will it mess everything up? If I can do so, which variant do I need to take the NON-HLOS.bin from?
My device info=
My original OS: Android 4.4.2.
My original system version: 161.44.31.ghost_row.
ACG.en.US
Bootloader: 30.B4
Current OS: cm13 nightly 9/21
Another thing, will flashing/updating modem fix the speakerphone bug? Not sure where that comes in but I was reading the forums and saw that it would but I would have to update my bootloader also, and I can't ?
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
As you are bootloader unlocked you can update the gpt partition use any latest gpt partition, i will suggest you can try xt1053 lolipop stock rom for all your above problem.
Salik Iqbal said:
As you are bootloader unlocked you can update the gpt partition use any latest gpt partition, i will suggest you can try xt1053 lolipop stock rom for all your above problem.
Click to expand...
Click to collapse
I'd rather stay away from the gpt partition, last time I messed with it, I ended up with a brick. But I will try the NON-HLOS from the xt1053 stock ROM. Thanks for the help ??
Sent from my Moto X using Tapatalk
Salik Iqbal said:
As you are bootloader unlocked you can update the gpt partition use any latest gpt partition, i will suggest you can try xt1053 lolipop stock rom for all your above problem.
Click to expand...
Click to collapse
Please reply back. I've tried everything I know to get LTE on GSM but it's still sticking with H+. And when trying to flash another variants modem and it still brings up CDMA on here. Any idea why when I'm grabbing the modem from the xt1053 and xt1058. Neither are CDMA.
I went ahead and flash the gpt so the speakerphone works now. That's the only good thing that's come out of me flashing this phone.
I've flashed NON-HLOS and the fsg. From both xt1053 and xt1058 variants. What should I do?
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
What should I do?
Click to expand...
Click to collapse
Buy god damn XT1058 :laugh:
Modem exchange gives nothing. And when you speak about LTE, you don't say anything of the bands available on your carrier(s). Get this information first.
XT1050 LTE bands = 700, 1700 MHz (B13/B4)
XT1058 LTE bands = 1900, 1700, 850, 2600, 700 MHz (B2/4/5/7/17)
XT1052 LTE bands = 800, 1800, 2600 MHz (B20/B3/B7)
XT1053 LTE bands = 700, 1700 MHz (B13/B4)
etc.
s5610 said:
Buy god damn XT1058 [emoji23]
Modem exchange gives nothing. And when you speak about LTE, you don't say anything of the bands available on your carrier(s). Get this information first.
XT1050 LTE bands = 700, 1700 MHz (B13/B4)
XT1058 LTE bands = 1900, 1700, 850, 2600, 700 MHz (B2/4/5/7/17)
XT1052 LTE bands = 800, 1800, 2600 MHz (B20/B3/B7)
XT1053 LTE bands = 700, 1700 MHz (B13/B4)
etc.
Click to expand...
Click to collapse
It's straight talk att network.
Sent from my Moto X using Tapatalk
But oh well. I love my phone. I'll stick with H+
Sent from my Moto X using Tapatalk
H+ (HSPA+) not so bad mode. LTE usually doesn't have prefect area cover, and weak signal will force phone to spend more energy on reconnection/switching.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
Any Moto X can be carrier unlocked. That's US rule from 2014, afaik )
s5610 said:
H+ (HSPA+) not so bad mode. LTE usually doesn't have prefect area cover, and weak signal will force phone to spend more energy on reconnection/switching.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
Any Moto X can be carrier unlocked. That's US rule from 2014, afaik )
Click to expand...
Click to collapse
Mine is CDMA unlocked too. But straight talk wouldn't activate the CDMA side because it's not a Verizon or Sprint phone. I know Verizon works and it gets LTE on my phone. So why not on GSM. I noticed when switching to LTE only, it has a lock beside the network. Contacted them and they said it was a device issue. Is LTE locked on the GSM side? This is a weird phone but I love it bc it's bootloader unlocked.
Sent from my Moto X using Tapatalk
s5610 said:
H+ (HSPA+) not so bad mode. LTE usually doesn't have prefect area cover, and weak signal will force phone to spend more energy on reconnection/switching.
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
Any Moto X can be carrier unlocked. That's US rule from 2014, afaik )
Click to expand...
Click to collapse
And yes you're right, it's not too bad but it is slower than LTE especially in the browser.
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
Is LTE locked on the GSM side?
Click to expand...
Click to collapse
No. Just make sure your carrier supports XT1050 LTE bands.
I would also replace SIM card to newer. It helps sometimes to get LTE.
s5610 said:
No. Just make sure your carrier supports XT1050 LTE bands.
I would also replace SIM card to newer. It helps sometimes to get LTE.
Click to expand...
Click to collapse
I've actually tried to flash the radio from different variants. Even the AT&T modem has the lock beside the network. I'm gonna get a new sim but the thing is, I just activated the phone 3 days ago...thanks ?
Sent from my Moto X using Tapatalk
s5610 said:
No. Just make sure your carrier supports XT1050 LTE bands.
I would also replace SIM card to newer. It helps sometimes to get LTE.
Click to expand...
Click to collapse
And I'm on straight talk using at&t towers. Shouldn't the at&t moto x modem work?
Sent from my Moto X using Tapatalk
s5610 said:
No. Just make sure your carrier supports XT1050 LTE bands.
I would also replace SIM card to newer. It helps sometimes to get LTE.
Click to expand...
Click to collapse
I'm on straight talk using at&t towers. Shouldn't the at&t moto x modem work?
Sent from my Moto X using Tapatalk
Josephdbrewer25 said:
I'm on straight talk using at&t towers. Shouldn't the at&t moto x modem work?
Click to expand...
Click to collapse
I would suggest to forget about modem exchange. It won't give effect, and won't turn on XT1050 into XT1058.
s5610 said:
I would suggest to forget about modem exchange. It won't give effect, and won't turn on XT1050 into XT1058.
Click to expand...
Click to collapse
Actually I get better signal when flashing att modem so it does have some effect.
Sent from my Moto X using Tapatalk
s5610 said:
I would suggest to forget about modem exchange. It won't give effect, and won't turn on XT1050 into XT1058.
Click to expand...
Click to collapse
Just for the record I'm not trying to turn my phone into another one, that's impossible. I'm just trying to get LTE. But thanks for your help...
Sent from my Moto X using Tapatalk