[Q] SE X1 how to use the DUALSHOCK3 play Fpsece - XPERIA X1 Q&A, Help & Troubleshooting

I want to use DUALSHOCK3 to play games for theFpsece
My phone has installed CobaltController. V0.4. CAB
I click "connect"
soon My phone restart automatically
Please know friends tell me beforehand
thank you
(My English is not very good )

Related

Webserver and Kaiser

I would like to do on my Kaiser what I can do on the PC:
I go inti the Internet Explorer and add a special TCPIP address and then I can see my Web camera - when I do this on the KAISER I don`t see the life pic !
Any explanations or help from the great community ?
thaks
myrin
May I ask the other way round - How co I get access to the camera in my network ????
Maybe your webcamera uses a speciel active-x component, that your Kaiser doesn't recognise... Or flash...
Yes I can choose between active x and Java ...on the PC
Activex or Java is not supported.
On your desktop, you can try to view the properties of the stream (e.g. mms://ip: port or http://ip: port/camimg.jpg) and try to open it directly on your device.
The best solution I found sofar for viewing ipcameras/webcameras on my tytn2 is webcamxp (http://www.webcamxp.com/).
They have a nice pocketpc/smartphone interface.
It works very well if you install the adobe flash plugin (http://www.adobe.com/products/flashplayer_pocketpc/) on your device.
I read about the flash player - could describe me what the use of it will be ?
In addition to activex and java, webcampxp has the possibility to broadcast in flash. Use the flash plugin to display the live stream in PIE.
The flash player plays flash files (as the name indicates).
Obviously webcamxp converts your webcam pics into flash format, which you can view with flash player.
Thanks a lot for your kind help ....I installed now the flash player but when I go into the IE and add the TCPI adress of the camera (http://....) there is still no change - I see nothing ???
Can I see with the flash player the live pics ???
It will most likely not work with your current webserver software/hardware as you said it is only capable of activex and java broadcasting.
webcamxp is just another webserver software solution which runs on your desktop. It supports most ipcameras. In combination with the flash plugin you are able to view your ipcameras on your tytn
So for all other programms it will not be of help ? only in conjunction with webcampyx ??
Myrin
Another alternative is viewcommander mobile (http://www.ivimg.com/products/vcmobile.htm). With this application installed on your device you can connect directly to your ipvideoserver. No use of PIE.
I couldn't however view a live camstream over a gprs/umts connection. Viewing with a wlan connection worked fine.
With this software it works !!! thanks so much for this advice ...
Hi Peter, as your question is now answered I thought it would be ok to hijack the thread. Could I ask what software you are using to host your webcam on your server?
I would like to do the same with my logitech quickcam and windows home server.
One camera is from axis the other from trust - both have there special software.
peter7 said:
With this software it works !!! thanks so much for this advice ...
Click to expand...
Click to collapse
doest it also work over gprs?
I had some trouble connecting to my aviosys ip 9100 video server over gprs.

games on the tytn II

how do u install games or get games for the htc 8925 aka att tilt?
google "games for ppc"
its just like a cab file(most) and u just run it on ur kaiser.
Some instalations go from comp -> kaiser
thanks for the info, got another i have some java games from my old phone will .jar files work on the phone?
I would assume you click on that "java" icon in your programs folder. Then menu-> install -> browse local files. It should theoretically pick up the .jar files. But then again i have no experience in this.
cool will give it a try thanks
hi, there is no 3D hardware accelerated games for the device coz htc have not released a decent driver. maybe you noticed that the 2D/3D display is realy slow on this device.don't forget to sign the petition on the kaiser section.cheers

HTC Audio Manager Problems

Hi everyone;
I have problem ith htc audio manager. I have NLD ROM and when ever i click at htc audio manager it doesnot open and also in Touch flo 3d it shows the playlist and media files album arts but hen i ant to play them it hangs up and doesnot play the media file and stops orking anyone had the same issue with NL ROM versions and if they did how to solve it PLEASE let me kneow if there is a solution !! and also it plays the first song about 2 seconds and then stops and hangs up this is in touch flo 3d but when i want to open htc audio manager itself fromn programs or indows folder it doesnot even open !!!
ALSO hard reset doesnot help to solve the problem !!!
Same probleme here.
Anybody?
That makes 3 of us
+1
with french ROM
FOZZER said:
That makes 3 of us
Click to expand...
Click to collapse
it's four actually

Youtube working with HTC streaming media

Hi all,
This is my first post but I hope it will help. Also, beeing french, it might be crawling with mistakes.
I've been looking around for a way to have youtube working on my Kaiser. Here is what I wanted :
- possibility to launch youtube videos from the m.youtube.com site
- possibility to watch TV (from the SFR portal page)
- using HTC streaming media to play the videos
Here is what I did not want :
- using youtubeplay (which is a great app but I like to be able to search or to play specific videos)
- using the TCPMP plugin (for no specific reason except the I was deadlocked on using HTC streaming media)
My config is :
- HTC Kaiser
- ROM : ROMeOS v4.1 with some tweaks for french (keyboard mainly)
- SFR Illymithics (France)
After several unsuccesfull atempts (despite searching the forum), I finally found a solution.
First, I installed the HTC diamond streaming player found in this forum (thx P1Tater for posting it). Appart form updating the app to a newer version, I did not change the fact that I couldn't play videos. The error message was always the same : "error connecting".
Second, I added the following REG key :
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StreamingDShow]
"OpenOriginalUDPPorts"=dword:00000001
Videos are now working perfectly.
For the record, I did not find the solution. A friend of mine had the same problem with his Diamond. He found a cab version of HTC streaming media which seemed to work. I tried it on my Kaiser and except for the VGA interface, videos did work perfectly. I then compared this app with the one listed above and I found 2 differences :
- the above reg key
- a newer version of Emz3GPStreamingFilter.dll
The new DLL did not seem to improve anything so I just droped it.
Since the Diamond working cab was sent to me by email, I don't want to post it here 'cause I do not know where it's from. It's called Tom's HTC diamond streaming media (or something similar) if you wish to look for it.
Well I hope this help.
Thanks for your feedback but.... the m.youtube.com already works fine with the french shipped rom, isn't it ?
I don't know about the French shipped Rom. If you mean the WM6.1 FRA found here, it did not work for me. I did not try going back to the the SFR ROM which is still in WM6. i tried several other Roms (French or others) found here but had the same issue. What's your Rom based on ? Any preferences on the existing roms ?
Thanks for your post. I am facing the same problem ...
the registry key that you mention, how did you find it?
Nice, I'm going to have to try this out. I keep getting the "connecting" issue.
for your first post this is good work and another way of getting youtube to work for people.
-youtube player works great
-skyfire as well
add your tweak to the list (although I haven't tested it yet I acknowledge you and your friends discovery)
Tna said:
Thanks for your post. I am facing the same problem ...
the registry key that you mention, how did you find it?
Click to expand...
Click to collapse
Well, as I explained, after trying several version of the streaming media app, I finally stumbled upon one that actually worked. Since it wes for VGA, I had to find what difference there was to other streaming media app.
I do not know what this reg key means or even does. I just point out that whithout it I could not get youtube video working.
-youtube player works great
-skyfire as well
Click to expand...
Click to collapse
Well, I know youtube player works. However, you can only see predefined feeds (or maybe you have another version of the player)
I do not know about Skyfire but it says you have to be in the US to get it so I ll have to wait for the first official release.
Thanx alot!!
Maybe the solution
I had that problem to.
it wasn't even possible to connect with messenger .
what i did was..!!
I have disabled the proxy using of my g/3g/HSDPA connection and it works fine with streaming media on my tytn2 kaiser..!
I hope this will solve your problem..
How To;
1 go to start
2 Go to settings
3 choose tab connections
4 click on connetions.
5 modify excisting connections
6 choose tab proxysettings and disable the using of the proxyserver
I hope this will solve your problem..
Let it know if it solves your problem too..!!
Greetz Emre
I screwed htc media...
I think I screwed htc streaming media.
I have an XDA Orbit II with htc streaming media 2.2 (built 1026.711) pre-installed. I could open Youtube videos from Explorer with no problems.
I installed flash player 2.1, real-player and TCMP as I was playing with Opera 9.5 (as many of you…)
The result is that htc streaming media (using Explorer) is not associated with youtube videos anymore. I have removed all other players form the ppc but it still doesn’t work. Every time I click on a video I just see the opening bar for 1sec and that’s it.
I tried to re-install htc media I found in the post but It doesn’t work (installation unsuccessful).
Does anybody know how to configure the htc again?
I went in the reg but I don’t know the keys to change.
Please help
I'm very thanks for you
First, I installed the HTC diamond streaming player found in this forum (thx P1Tater for posting it). Appart form updating the app to a newer version, I did not change the fact that I couldn't play videos. The error message was always the same : "error connecting".
Second, I added the following REG key :
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StreamingDShow]
"OpenOriginalUDPPorts"=dword:00000001Videos are now working perfectly.
Click to expand...
Click to collapse
I've downloaded HTC diamond streaming player from the link and added the registry but still won't play after showing Buffering activity for 7 secs.
Help please....
Great! Thank you very much for this registry key:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\StreamingDShow]
"OpenOriginalUDPPorts"=dword:00000001
Thanks.
>>JS>>
My reg key is ok, but i can't stream video from youtube app and m.youtube.com
In my app says, connection error, i have working 3g internet, everything is ok, only youtube stream. Any idea? i have HTC Diamnond Touch (DIAM100) wm6.5 sense 2.5, ROM: Freya WWE 23134
This rom is perffect form me, but streaming is not ok. Thanks
Is there any youtube downloader that is working on this device?

[Q] d3d drivers cause browser crash ??

Hi, I've installed d3d drivers for kaiser on wm6.5 froma cab named AF974 D3D_Drivers.cab. I need them to play with Crazy Taxi 3D. When i try to use a browser (Opera Mobile 10 or IE) my Kaiser will reboot. If i remove the driver i can surf the web but i can't play the game. Someone have an idea??? I'ts possible to 'deactivate' the drivers instead of removing them? Thanks to all and sorry for my English...

Categories

Resources