[Q]Odin Oneclick Download(JF6) can change bootloader? - Captivate Q&A, Help & Troubleshooting

I flashed Cotinuum 5 with new bootloader.
I have 3 question, please answer for me.
1. When i want back to stock, i can use Odin One Click Downloader v1.0? It's OK?
2. Odin One Click Downloader v1.0 will replace with old bootloader or bootloader have no change?
3. Odin One Click Downloader v1.0 have included 3buttonfix?

what did the continuum instructions say? read them again.
it answers all 3 questions in RED

nccong85 said:
I flashed Cotinuum 5 with new bootloader.
I have 3 question, please answer for me.
1. When i want back to stock, i can use Odin One Click Downloader v1.0? It's OK?
2. Odin One Click Downloader v1.0 will replace with old bootloader or bootloader have no change?
3. Odin One Click Downloader v1.0 have included 3buttonfix?
Click to expand...
Click to collapse
I would stop using the one click odin now. If you're on Continuum 5, you have the full version of odin. Use that with a jh7.tar in the pda slot to go back to stock 2.1. That way you won't have to worry. The one floating around here doesn't have bootloaders. Don't mess with bootloaders unless you have to.

corrected...

As I said on other threads this issue is going to be a brickathon
Sent from my SGH-I897 using XDA Premium App

TRusselo said:
wrong!!
Continuum and all other gingerbread, will change you to gingerbread bootloaders.
SO TO RETURN TO STOCK YOU NEED STOCK BOOTLOADERS...
and where do you get them??? ONE CLICK
like you said the others dont have them. so if you use them after gingerbread.
YOU BRICK!!!!!!
thanks for almost bricking someone!~
now that you confused him, here I'll even tell you what continuum says, in noob speak
flash back to stock with ODIN ONECLICK because it has BOTH bootloaders
test to see if 3 button works.
IF NOT flash 3button fix. - it only has 2nd bootloader. YOU NEED THE PRIMARY FROM ONE CLICK
Click to expand...
Click to collapse
Umm... Dude... calm down. I don't give advice without testing first.
1. You can use the i9000 gingerbread bootloaders in froyo. I tried Continuum and a few i9000 gingerbread roms last night. Now I'm back on 2.2 kb1 rom because I was just testing. STILL USING THE SAME BOOTLOADERS!!! I know because there is that annoying i9000 slash screen before the Att screen. Plus, I did not go back to stock. I just re-flashed my old rom.
2.Don't just start accusing people of things. Have you tried gingerbread? Have you gone back to stock? You should probably get your facts straight before handing out false allegations.

TRusselo said:
wrong!!
Continuum and all other gingerbread, will change you to gingerbread bootloaders.
SO TO RETURN TO STOCK YOU NEED STOCK BOOTLOADERS...
and where do you get them??? ONE CLICK
like you said the others dont have them. so if you use them after gingerbread.
YOU BRICK!!!!!!
thanks for almost bricking someone!~
now that you confused him, here I'll even tell you what continuum says, in noob speak
flash back to stock with ODIN ONECLICK because it has BOTH bootloaders
test to see if 3 button works.
IF NOT flash 3button fix. - it only has 2nd bootloader. YOU NEED THE PRIMARY FROM ONE CLICK
Click to expand...
Click to collapse
By what I am reading you are in fact wrong as well. If you flashed the gingerbread boot loader do not use one click. From thread:
!!!!!WARNING!!!!! DO NOT USE THIS METHOD IF YOU ALREADY UPDATED YOUR BOOTLOADERS TO i9000 GINGERBREAD ONES!!! Chances of bricking are 99% because this method flashes only secondary bootloader and the phone wont boot with primary i9000 bootloader and secondary i897 bootloader.
3. Reboot your phone in recovery
Sent from my SGH-I897 using XDA Premium App

yes i did but i followed instructions
what he meant by
!!!!!WARNING!!!!! DO NOT USE THIS METHOD IF YOU ALREADY UPDATED YOUR BOOTLOADERS TO i9000 GINGERBREAD ONES!!! Chances of bricking are 99% because this method flashes only secondary bootloader and the phone wont boot with primary i9000 bootloader and secondary i897 bootloader.
Click to expand...
Click to collapse
the "this method" is talking about the 3 button fix method.
AND YES DO NOT FLASH OVER GINGERBREAD - it only has 1 of 2 bootloaders! = brick
UNLESS YOU FLASH ONE CLICK FIRST - has BOTH bootloaders = no brick!
try quoting the WHOLE QUOTE it reads accurately, and ill add a couple words to make it read even better!
You can return to stock by using OneClickDownloader and performing a master clear.
◘BACKUP YOUR DATA BEFORE! EVERYTHING WILL BE ERASED DURING THE MASTER CLEAR PROCESS.
◘THEN MAKE SURE YOU HAVE ACCESS TO 3 BUTTON COMBO! IF NOT, RETURN TO STOCK BY USING THIS METHOD !!!!!WARNING!!!!! DO NOT USE THIS METHOD IMMEDIATELY AFTER i9000 GINGERBREAD Bootloaders!!! Chances of bricking are 99% because this method flashes only secondary bootloader and the phone wont boot with primary i9000 bootloader and secondary i897 bootloader. Flash ONE CLICK FIRST
Click to expand...
Click to collapse

nevermind.... read last post

Odin one click does not flash primary boot loader
Sent from my SGH-I897 using XDA Premium App

screw it, i was trying to keep it simple and TO THE INSTRUCTIONS FOR THE NOOB with 1 post
i fu###ing give up!

I don't really care man. I can follow directions too, but I can also make decisions on my own. I know for a fact you do not need to change bootloaders to go back to stock. You just can't use the primary from 2.3 and the secondary from 2.1. That will brick your phone. But whatever, I have better things to do than argue with you.

TRusselo said:
screw it, i was trying to keep it simple and TO THE INSTRUCTIONS FOR THE NOOB
i fu###ing give up!
Click to expand...
Click to collapse
I respect what you were trying to do, but odin one click would be a.disaster if you already changed to the ginger bread boot loader
Sent from my SGH-I897 using XDA Premium App

TRusselo said:
screw it, i was trying to keep it simple and TO THE INSTRUCTIONS FOR THE NOOB
i fu###ing give up!
Click to expand...
Click to collapse
Man... it's ok... There's too much angst on Xda these days.

agreed......

I'm just saying don't mess with bootloaders unless you have to. Our phones will boot with the i9000 bootloaders. For a noob, I think it would be better not to confuse him with "you can use this one-click, but not the other one-click because, it only contains the secondary bootloader". Thats why I suggested the jh7 with no bootloaders via the Odin that came with Continuum. Plus, later when the gingerbread roms get more polished, he can go back with minimal hassle.

mcord11758 said:
!!!!!WARNING!!!!! DO NOT USE THIS METHOD IF YOU ALREADY UPDATED YOUR BOOTLOADERS TO i9000 GINGERBREAD ONES!!! Chances of bricking are 99% because this method flashes only secondary bootloader and the phone wont boot with primary i9000 bootloader and secondary i897 bootloader.
Click to expand...
Click to collapse
mcord11758 said:
Odin one click does not flash primary boot loader
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
odin one click worked fine for me......

Pirateghost said:
odin one click worked fine for me......
Click to expand...
Click to collapse
Hey Pirateghost, did DG's one-click restore i897 bootloaders? I'm sick of the i9000 splash screen and want to get rid of it. But I'm too lazy to flash unless I know it works.

Pirateghost said:
odin one click worked fine for me......
Click to expand...
Click to collapse
Ok well then I apologize
As asked, do you still have i9000 splash
Sent from my SGH-I897 using XDA Premium App

mcord11758 said:
Ok well then I apologize
As asked, do you still have i9000 splash
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Nope. ATT world phone screen, followed by ATT 3g animation followed by Samsung galaxy s boot animation. Just like stock
Sent from my HTC Vision

Related

how do i entery recovery mode running i9000xxjph rom

can anybody help me i want to root my phone but im using the new beta build of froyo the button combos are not working.
im using samsung captivate
ademejia said:
can anybody help me i want to root my phone but im using the new beta build of froyo the button combos are not working
Click to expand...
Click to collapse
You have to flash a stock captivate kernel, use the key combo, run the update package, then flash back to the JPH kernel again
Zilch25 said:
You have to flash a stock captivate kernel, use the key combo, run the update package, then flash back to the JPH kernel again
Click to expand...
Click to collapse
won't that not work since it's a 2.2 build and we have no available kernels?
did Zilch finally make a mistake? AND I CAUGHT IT!?!?
okay i will try it
I was always under the assumption that with a 2.2 ROM, a 2.1 kernel won't boot (even to recovery, though I assume since it can get to download it can get to recovery now that I think about it) as long as you flash the JPH kernel back immediately after before you boot?
maybe I didn't catch Zilch making a mistake =(
Kaik541 said:
won't that not work since it's a 2.2 build and we have no available kernels?
did Zilch finally make a mistake? AND I CAUGHT IT!?!?
Click to expand...
Click to collapse
Nope, I'm right =P
You have to use it to get the recovery so that you can use our key combos (and power as select), install the package, then flash back. The phone won't BOOT without the JPH kernel but it will get to recovery =P
Ps. NEENER
Zilch25 said:
Nope, I'm right =P
You have to use it to get the recovery so that you can use our key combos (and power as select), install the package, then flash back. The phone won't BOOT without the JPH kernel but it will get to recovery =P
Ps. NEENER
Click to expand...
Click to collapse
one of these days, you'll be drunk or tired and I'll catch you, and then I'll steal your throne!
MWAHAHAAH!
err... *ahem* so yes, booting into recovery to root is possible. just flash back
Kaik541 said:
one of these days, you'll be drunk or tired and I'll catch you, and then I'll steal your throne!
MWAHAHAAH!
err... *ahem* so yes, booting into recovery to root is possible. just flash back
Click to expand...
Click to collapse
I dunno, most likely if I'm drunk I won't be posting on XDA
ummm where can i get a jph kernel. is that the 802 pit file ?
Zilch25 said:
I dunno, most likely if I'm drunk I won't be posting on XDA
Click to expand...
Click to collapse
haha everyone has lonely nights! let me have my dreams
ademejia said:
ummm where can i get a jph kernel. is that the 802 pit file ?
Click to expand...
Click to collapse
the JPH kernel will be inside the flashable package. look for a file named zimage.tar
was meant to imply the kernel was in there, didn't think he wouldn't know what to do with it... zZzzzZzzzzZZZZzz
Kaik541 said:
the JPH kernel will be inside the flashable package. look for a file named zimage.tar
Click to expand...
Click to collapse
No no no, if he does that the zImage file won't be flashable, unless he's on a linux box and can repackage it.
Go to the I9000 forums and find one of the threads about rooting JPH, they have a handy zip that contains the JPH kernel and the update.zip for rooting
Zilch25 said:
No no no, if he does that the zImage file won't be flashable, unless he's on a linux box and can repackage it.
Go to the I9000 forums and find one of the threads about rooting JPH, they have a handy zip that contains the JPH kernel and the update.zip for rooting
Click to expand...
Click to collapse
SHOWS WHAT I KNOW. now you're catching me giving bad advice. today is not my day. I'm gonna go sit and watch Jersey Shore and feel better about myself.
Kaik541 said:
SHOWS WHAT I KNOW. now you're catching me giving bad advice. today is not my day. I'm gonna go sit and watch Jersey Shore and feel better about myself.
Click to expand...
Click to collapse
MUAHAHAHA My how the tables have turned!
when i made my selection of updating the zip then i press power button nothing happens leaves me stuck.
i did the captivate kernel then then i did the recovery to root and applied it. then i flash back the i9000 jhp kernel it wont make my selection to reboot and go in to the os.
ademejia said:
when i made my selection of updating the zip then i press power button nothing happens leaves me stuck.
i did the captivate kernel then then i did the recovery to root and applied it. then i flash back the i9000 jhp kernel it wont make my selection to reboot and go in to the os.
Click to expand...
Click to collapse
I'm curious why it's going back into recovery again- just hook your phone up to your computer and go into your adb folder and type: adb reboot
ademejia said:
ummm where can i get a jph kernel. is that the 802 pit file ?
Click to expand...
Click to collapse
stock kernel is the 2.6.29 [email protected] #2 right?
androidftwin said:
stock kernel is the 2.6.29 [email protected] #2 right?
Click to expand...
Click to collapse
Yup, thats stock captivate
I curious as to why people lately have been trying the i9000 jph? Yes, I would want 2.2 also but that thing is not made for these phones and with all the people lately having trouble, why bother? Just flash back to stock, use adb if buttons don't work, and load Eugene's captivate hybrid. It's fast, doesn't have the att/samsung bloat, and it works without bricking our phones.
bobbylx said:
I curious as to why people lately have been trying the i9000 jph? Yes, I would 2.2 also but that that thing is not made for these phones and with all the people lately having trouble, why bother? Just flash back to stock, use adb if buttons don't work, and load Eugene's captivate hybrid. It's fast, doesn't have the att/samsung bloat, and it works without bricking our phones.
Click to expand...
Click to collapse
Eh JPH works fine on the Captivate (even external SD shockingly enough)- it's just not that great of an upgrade period though =P

[Q] GB 2.3.3. Horizontal lines on boot after patching bootloader. Recovery mode lost

Hi,
I flashed GB 2.3.3 (CF-ROOT 3.3) when it first came up and everything worked fine. Today I decided to check my bootloader. I installed the patch and applied it because the application said: SIGNED. When I rebooted the tab, here is what happened:
A lot of horizontal lines (green, blue, white....etc) -----> then samsung logo appeared -----> then horizontal lines again ---> then the tab main screen appeared.
The tab works fine and now the patch said "YOU ARE SAFE".
I noticed that I lost the recovery mode. ie. When I go to CWM manager ---> Recovery ---> Reboot into ClockWorkMod recovery, the tab gets stuck on samsung logo with these horizontal lines. (Same thing with Power on + Volume up )
What Should I do please ? Flash again 2.3.3 ?
Thanks in advanced.
Problem resolved. Reflashed 2.3.3 again.
Sorry to bother.
Sent from my GT-P1000 using XDA Premium App
DO NOT I REPEAT DO NOT DO THAT AGAIN. Flashing bootloader is practically the only way to BRICK the tab beyond repair except by sending to samsung. What you did btw was downgrade the bootloaders of your tab which is an extremely risky business.
THE GB bootloaders are signed yes but are not secured and they are needed for GB to boot making that patch pointless since kernels and mods can be installed whether bootloaders are signed or not.
Try not to flash bootloader. But some kernels will distort the boot screen. CM7 an to MoDaCo kernels for example for this, but it's nothing to worry about.
| Don't Revive Me Bro! |
DarkPal said:
DO NOT I REPEAT DO NOT DO THAT AGAIN. Flashing bootloader is practically the only way to BRICK the tab beyond repair except by sending to samsung. What you did btw was downgrade the bootloaders of your tab which is an extremely risky business.
THE GB bootloaders are signed yes but are not secured and they are needed for GB to boot making that patch pointless since kernels and mods can be installed whether bootloaders are signed or not.
Click to expand...
Click to collapse
Darkpal,
It's working fine now. I got confused with Overcome 2 installation guide where it says to check bootloader and apply the patch.
Am I safe now?
Sent from my GT-P1000 using XDA Premium App
GANJDROID said:
Try not to flash bootloader. But some kernels will distort the boot screen. CM7 an to MoDaCo kernels for example for this, but it's nothing to worry about.
| Don't Revive Me Bro! |
Click to expand...
Click to collapse
Thanks man. I think I'm fine now
Sent from my GT-P1000 using XDA Premium App
Hi tupo05
i did the same thing.
How did you re-flash?
My Pc (ODIN) doesn`t find the Tab so how should i be able to reflash?
Thanks
GoloTab said:
Hi tupo05
i did the same thing.
How did you re-flash?
My Pc (ODIN) doesn`t find the Tab so how should i be able to reflash?
Thanks
Click to expand...
Click to collapse
Hi,
In my case, i was able to go to download mode and therefore the tab was recognized in Odin. So I just re-flashed 2.3.3 again following Chainfire thread in the Dev section.
SGT Running Overcome 2.0.0 RC1
Hi
Thank you so much. My Tab is running again :-D.
Which Overcome How-To do you use?
Thanks again
GoloTab said:
Hi tupo05
i did the same thing.
How did you re-flash?
My Pc (ODIN) doesn`t find the Tab so how should i be able to reflash?
Thanks
Click to expand...
Click to collapse
I noticed that sometimes I had to go in the PC device manager and delete the drivers for the tab and let Win 7 find and load them again, and as soon as that's done ODIN finds the tab and I was able to reflash. I "soft bricked" my tab about 6 times trying different ROM's and Kernals, and even an app or two. I found this practice of deleting and reloading the drivers the only way to save the tab.
GoloTab said:
Hi
Thank you so much. My Tab is running again :-D.
Which Overcome How-To do you use?
Thanks again
Click to expand...
Click to collapse
Golotab,
I'm happy you're up and running again. For Overcome, just follow these instructions http://forum.xda-developers.com/showthread.php?t=1074759
it's very easy. Just don't patch the bootloader because you are already on 2.3.3
Good luck
hi
I would like to know how to fix this problem? I having same problem.
same prob with p1000n
have the same problem with my sgt p100n crashed colors i tried many roms with the same problem , nd i didn't patch my bootloaders any ideas?
tupo05 said:
Golotab,
I'm happy you're up and running again. For Overcome, just follow these instructions http://forum.xda-developers.com/showthread.php?t=1074759
it's very easy. Just don't patch the bootloader because you are already on 2.3.3
Good luck
Click to expand...
Click to collapse
Hi, I am facing the same situation. I just hope someone can clarify for me.
Instead of refresh 2.3.3 back, can I just follow the line (quoted) for OVERCOME??
After Overcome, can I flash MIUI ROM???
Thanks in advance.
de15april said:
Hi, I am facing the same situation. I just hope someone can clarify for me.
Instead of refresh 2.3.3 back, can I just follow the line (quoted) for OVERCOME??
After Overcome, can I flash MIUI ROM???
Thanks in advance.
Click to expand...
Click to collapse
Yes you can. Restock then flash overcome.
If you are already on overcome, you can flash Miui on the top (because you are already on ext4 system)
I hope that helps
Sent from my GT-P1000 using xda premium

[Q] ICS (or any other rom) won't install on my Samsung Captivate!

Hello. Well i have a big problem with my Captivate. All custom roms that i have tried (Cyanogen, MIUI, Cognition, Serendipity, and the ICS rom by teamhacksung) won't bother to install. I always flash back to stock 2.1 via Odin-1-Click, root it via Samsung Galaxy S 1 Click Root, and install the Hardcore Speedmod Kernel for Clockwork mod. I follow all the directions completely and with Cyanogen i always get a boot loop, and with all the others clockwork mod freezes while it is installing the rom. I thought it was taking it's time so i left it overnight to complete. About 8 hours later it was still at the same screen where it said "Installing Update." Can anyone help?
sonikkuu said:
Hello. Well i have a big problem with my Captivate. All custom roms that i have tried (Cyanogen, MIUI, Cognition, Serendipity, and the ICS rom by teamhacksung) won't bother to install. I always flash back to stock 2.1 via Odin-1-Click, root it via Samsung Galaxy S 1 Click Root, and install the Hardcore Speedmod Kernel for Clockwork mod. I follow all the directions completely and with Cyanogen i always get a boot loop, and with all the others clockwork mod freezes while it is installing the rom. I thought it was taking it's time so i left it overnight to complete. About 8 hours later it was still at the same screen where it said "Installing Update." Can anyone help?
Click to expand...
Click to collapse
Does it boot to 2.1 ok? Have you Master Cleared?
Edit.... Why are you installing speedmods kernel? that is probably your problem right there
kangi26 said:
Does it boot to 2.1 ok? Have you Master Cleared?
Edit.... Why are you installing speedmods kernel? that is probably your problem right there
Click to expand...
Click to collapse
What do you recommend to install the roms? Odin restores the captivate back to stock perfectly without any problems.
Sent from my SAMSUNG-SGH-I897 using XDA App
Here's what I would do:
Odin1Click to stock
Master Clear
When the phone reboots, copy this and the ROM you want to flash to your SD card
Reboot into recovery, and select "install from zip"
Select the update.zip you just downloaded
It will cycle thru once, do it one more time, you'll then boot into CWM
Select to install from zip again, this time select your ROM
and you should be good to go
---------- Post added at 07:38 PM ---------- Previous post was at 07:36 PM ----------
sonikkuu said:
What do you recommend to install the roms? Odin restores the captivate back to stock perfectly without any problems.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Flashing the kernel was getting you in bootloops.
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
Which ROM do you want to run? CM7/Miui/ICS are VERY simple, GB is a LITTLE bit more complicated, you have to flash the boot loaders first(and has a bit more risk of bricking too). With GB, just make sure you read very well, and fully understand what you need to do BEFORE you do it
I want to install the ics rom and thank you I will try to do this tomorrow and see if my problem is resolved
sonikkuu said:
I want to install the ics rom and thank you I will try to do this tomorrow and see if my problem is resolved
Click to expand...
Click to collapse
Make sure to do a Master Clear first. Save everything you want to keep on a ext SD, and back everything up. Master Clear will return the phone just like you got it from AT&T. It erases EVERYTHING
Also, I remove my SIM and ext SD before I M/C just to be safe
---------- Post added at 07:49 PM ---------- Previous post was at 07:47 PM ----------
If you have any issues with the teamhacksung installation, go to the link in my signature to the Q&A thread, and you should be able to get help there.
Make sure you read the ROM thread OP well first.
It's a great ROM!
OK! Got any other tips so that I wont turn this into a 500$ paperweight?
sonikkuu said:
OK! Got any other tips so that I wont turn this into a 500$ paperweight?
Click to expand...
Click to collapse
Don't hit it with a brick?
When you are using Odin1Click make sure you don't disconnect your USB, or knock the battery out, make sure your battery is more than 50%(100 is best).
If you look under your battery, is there a tag with numbers like, 10.06, 10.07, 10.08 and so on there? If there is, what is yours?
kangi26 said:
Don't hit it with a brick?
When you are using Odin1Click make sure you don't disconnect your USB, or knock the battery out, make sure your battery is more than 50%(100 is best).
If you look under your battery, is there a tag with numbers like, 10.06, 10.07, 10.08 and so on there? If there is, what is yours?
Click to expand...
Click to collapse
There is no such tag on there. What is that for?
Sent from my SAMSUNG-SGH-I897 using XDA App
sonikkuu said:
There is no such tag on there. What is that for?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
It just says when the phone was built. Not to worry too much, if you've already Odin'ed back to stock you're probably good to go
kangi26 said:
Here's what I would do:
Odin1Click to stock
Master Clear
When the phone reboots, copy this and the ROM you want to flash to your SD card
Reboot into recovery, and select "install from zip"
Select the update.zip you just downloaded
It will cycle thru once, do it one more time, you'll then boot into CWM
Select to install from zip again, this time select your ROM
and you should be good to go
Click to expand...
Click to collapse
it's still stuck on "Installing Update" :/
I have a quick question regarding upgrading to ICS from GB. I'm running KK4. If I were to CWM to ICSSGS or TeamHacksungs ROM, could I just do an Odin oneclick back to KK4 if I don't like them (without problem of bricking)? I know the basics of flashing , just wanna make sure coming back to my stable ROM will be as easy as a 1click. Thanks!
El Niche said:
I have a quick question regarding upgrading to ICS from GB. I'm running KK4. If I were to CWM to ICSSGS or TeamHacksungs ROM, could I just do an Odin oneclick back to KK4 if I don't like them (without problem of bricking)? I know the basics of flashing , just wanna make sure coming back to my stable ROM will be as easy as a 1click. Thanks!
Click to expand...
Click to collapse
I don't believe there is an Odin-one-Click for KK4 although i know there is a leaked Odin flashable version of KH3
There is a Heimdall One click to KK4 that I made.
Ohhh where can I find it!?
Sent from my SAMSUNG-SGH-I897 using XDA App
KK4 One click
Sent from my SGH-I897 using xda premium
Perfect, Im gonna doa backup and maybe flash ICSSGS and if I encounter any problems I'll just One click. Gotta try that ICS goodness. Hope its smooth
b-eock said:
KK4 One click
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Umm which one should i download? There is one with and the other without bootloaders!? I'm a noob to this....
I am the noob, IDK why I made two since Heimdall gives you the choice to flash bootloaders. Either is OK, short answer! I would do the Bootloader one just because if you ever need it, then you can flash BL's. If not then just uncheck the "Flash BL's box
b-eock said:
I am the noob, IDK why I made two since Heimdall gives you the choice to flash bootloaders. Either is OK, short answer! I would do the Bootloader one just because if you ever need it, then you can flash BL's. If not then just uncheck the "Flash BL's box
Click to expand...
Click to collapse
Ah! Ok thank you!

[GUIDE][ SCH-I705 ] Back to Stock - Relock, Unroot

Return your SCH-I705 back to factory stock (minus flash counter)
Flash these in ODIN 3.04
DO NOT CHECK RE-PARTITION, FLASH LOCK, OR LED CONTROL
ALL ANDROID VERSIONS ARE 4.1.2
VRBLL2
I705VRBLL2_I705VZWBLL2_VZW.zip
VRBMI1
I705VRBMI1_I705VZWBMI1_VZW.zip
Unfortunatley, I don't know of a way to reset the flash counter. Triangle Away may do it, and the manual method for resetting it on the Galaxy S3 may do it, but I've not confirmed nor do I want to try.
Don't forget to hit the thanks button!
I might want this one.
Is there a known way to go back to the rooted unlocked tab?
Yep. Just flash one of the stock rooted Odin system images in the root unlock recovery thread, then flash the aboot (bootloader)
Basically following the instructions like you would if you just bought the tablet.
Sent from my SCH-I535 using XDA Premium HD app
Triangle Away shows the correct flash counter on my tablet, so I'm going to assume it works, but no proof. I've sent chainfire a PM asking a couple questions and hopefully we'll have an answer
Updated links in OP.
BigBot96 said:
Return your SCH-I705 back to factory stock (minus flash counter)
Flash these in ODIN 3.04
DO NOT CHECK RE-PARTITION, FLASH LOCK, OR LED CONTROL
ALL ANDROID VERSIONS ARE 4.1.2
VRBLL2
I705VRBLL2_I705VZWBLL2_VZW.zip
VRBMI1
I705VRBMI1_I705VZWBMI1_VZW.zip
Unfortunatley, I don't know of a way to reset the flash counter. Triangle Away may do it, and the manual method for resetting it on the Galaxy S3 may do it, but I've not confirmed nor do I want to try.
Don't forget to hit the thanks button!
Click to expand...
Click to collapse
Quick question. Can I perform this return to stock process on my tablet or do I need computer?
jshawjr said:
Quick question. Can I perform this return to stock process on my tablet or do I need computer?
Click to expand...
Click to collapse
Computer with ODIN. Don't use Mobile ODIN as the locked bootloader will brick you. Either way you may not be able to use these depending on what version you're on.
BigBot96 said:
Computer with ODIN. Don't use Mobile ODIN as the locked bootloader will brick you. Either way you may not be able to use these depending on what version you're on.
Click to expand...
Click to collapse
That's good to know about ODIN. I am currently on Android Version 4.1.2 "DoubleShoot ROM", by Dr. Hyde. Will it work on thiss version?
WTF
So I was rooted and customized all except twrp and used flashify to flash twrp 2.8.7.0 and all the sudden i GET Verizon wireless has detected un...blahblah blah please take to a vedrizon store..... WTF is this and why in the heck do I have it comming up after root and everything???and now what?? I think just re flash stock recovery with 3.04 odin right?
nope its ir bootloader sorry man reflash to stock

i896 help

i had a cm version on the phone and tried to update but when i did it failed and i couldnt boot into my rom so i tried to install another all failed ended up installing speedmod kernel and recovery and now i cant mount my sdcard????
first can some1 plz explain to me what is it with this phone and it being selective about the roms i can install and when usually its just wipe and flash for me now i have this to deal with
xanda143 said:
i had a cm version on the phone and tried to update but when i did it failed and i couldnt boot into my rom so i tried to install another all failed ended up installing speedmod kernel and recovery and now i cant mount my sdcard????
first can some1 plz explain to me what is it with this phone and it being selective about the roms i can install and when usually its just wipe and flash for me now i have this to deal with
Click to expand...
Click to collapse
That's cause you didn't follow all the steps.. When you flash higher versions, it has to repartition. Therefor a couple flashes are needed. If coming from gb and going up to 10.2 or 10.3, you'll have to flash cm7 first and then make your way to cm10.2, once again by flashing twice to rewrite the partition.
All that is clearly mentioned in the instructions. Just gotta take the time to read and understand it.
Sent from my SGH-I747 using xda app-developers app
---------- Post added at 07:18 AM ---------- Previous post was at 07:18 AM ----------
BWolf56 said:
That's cause you didn't follow all the steps.. When you flash higher versions, it has to repartition. Therefor a couple flashes are needed. If coming from gb and going up to 10.2 or 10.3, you'll have to flash cm7 first and then make your way to cm10.2, once again by flashing twice to rewrite the partition.
All that is clearly mentioned in the instructions. Just gotta take the time to read and understand it.
As for your sd card, that could be another problem. It might've gone bad.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
That's cause you didn't follow all the steps.. When you flash higher versions, it has to repartition. Therefor a couple flashes are needed. If coming from gb and going up to 10.2 or 10.3, you'll have to flash cm7 first and then make your way to cm10.2, once again by flashing twice to rewrite the partition.
All that is clearly mentioned in the instructions. Just gotta take the time to read and understand it.
Sent from my SGH-I747 using xda app-developers app
---------- Post added at 07:18 AM ---------- Previous post was at 07:18 AM ----------
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i know the repartitioning thing but not from this phone. trust me if it was clear in the instructions i would have done it 4-5 roms iv tried and none of them have this instruction i appreciate your resonse though but onto a solution. i think since it refuses to mount the sdcard smtn went wrong trying to install cm10.2 though they all faild. so im guessing my safest bet to be to use odin to load a new rom or something advice there or from that of your experince with the device would be much appreciated.
xanda143 said:
i know the repartitioning thing but not from this phone. trust me if it was clear in the instructions i would have done it 4-5 roms iv tried and none of them have this instruction i appreciate your resonse though but onto a solution. i think since it refuses to mount the sdcard smtn went wrong trying to install cm10.2 though they all faild. so im guessing my safest bet to be to use odin to load a new rom or something advice there or from that of your experince with the device would be much appreciated.
Click to expand...
Click to collapse
I'd probably start fresh at this point. Flash Odin kk4 without bootloaders and see if boots up correctly. Also try your sd card. From there you can flash korn kernel using odin 1.87 and go back up to whichever ROM you want using their full instructions.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
I'd probably start fresh at this point. Flash Odin kk4 without bootloaders and see if boots up correctly. Also try your sd card. From there you can flash korn kernel using odin 1.87 and go back up to whichever ROM you want using their full instructions.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
explain somethings to me plz and thanks. What the layout of this phone partition table? does it have a bootloader like on htc?
the kernel seems to be packaged with cwm tho i doubt it is this true on all occasions?not being able to flash a rom due to the kernel mismatch is unheard of by me atleast it would flash then just not work can u explain what you think was the problem i was on cm10 btw.
korm kernel gonna research that but i might get anseers from you first its a kernel for what gb??
sorry am reallly blank on this phone
download links or queries to google would be a great help here dont wanna make a bad situation worst
got the kk4 kernel from here:http://forum.xda-developers.com/showthread.php?t=1294477 if it works and i can mount my sdcard i will need a rom can i use any rom?
xanda143 said:
got the kk4 kernel from here:http://forum.xda-developers.com/showthread.php?t=1294477 if it works and i can mount my sdcard i will need a rom can i use any rom?
Click to expand...
Click to collapse
Here's stock kk4: http://hotfile.com/dl/137871658/d25...O_Bootloaders_Re-partition_Full_Wipe.zip.html
BWolf56 said:
Here's stock kk4: http://hotfile.com/dl/137871658/d2533cc/i897uckk4_Odin_One_Click_NO_Bootloaders_Re-partition_Full_Wipe.zip.htm
i got impatient and did this http://forum.xda-developers.com/showthread.php?t=731989 think its the same program minus the no bootleaders full partion idk. anyways sicnce your already helping and you know where i am what are your instructions to now getting on jb and will i have to do that everytime i wanna switch roms?
Click to expand...
Click to collapse
xanda143 said:
BWolf56 said:
Here's stock kk4: http://hotfile.com/dl/137871658/d2533cc/i897uckk4_Odin_One_Click_NO_Bootloaders_Re-partition_Full_Wipe.zip.htm
i got impatient and did this http://forum.xda-developers.com/showthread.php?t=731989 think its the same program minus the no bootleaders full partion idk. anyways sicnce your already helping and you know where i am what are your instructions to now getting on jb and will i have to do that everytime i wanna switch roms?
Click to expand...
Click to collapse
Getting impatient is the worse thing you can do.. Now you'll have to flash the gb bootloaders cause you just flashed 2.2.
Now flash this: http://click.xda-developers.com/api...e</b></font>&jsonp=vglnk_jsonp_13811531834186
And please, be patient. Don't interrupt it for any reason!!
From there, follow this: http://forum.xda-developers.com/showthread.php?t=1350266
I'm sorry but I can't hold your hand through all this, I'm in class.
Click to expand...
Click to collapse
BWolf56 said:
xanda143 said:
Getting impatient is the worse thing you can do.. Now you'll have to flash the gb bootloaders cause you just flashed 2.2.
Now flash this: http://click.xda-developers.com/api...e</b></font>&jsonp=vglnk_jsonp_13811531834186
And please, be patient. Don't interrupt it for any reason!!
From there, follow this: http://forum.xda-developers.com/showthread.php?t=1350266
I'm sorry but I can't hold your hand through all this, I'm in class.
Click to expand...
Click to collapse
Thank you i think that will be all
Click to expand...
Click to collapse
BWolf56 said:
xanda143 said:
Getting impatient is the worse thing you can do.. Now you'll have to flash the gb bootloaders cause you just flashed 2.2.
Now flash this: http://click.xda-developers.com/api...e</b></font>&jsonp=vglnk_jsonp_13811531834186
And please, be patient. Don't interrupt it for any reason!!
From there, follow this: http://forum.xda-developers.com/showthread.php?t=1350266
I'm sorry but I can't hold your hand through all this, I'm in class.
Click to expand...
Click to collapse
BTW readme is exrtremly clear that it dosnt contain any bootloader files which i guess since i did the other thing would make this irrelavant and i could just go to the 2nd instructions but ill do to the T. BIG THANKS
Click to expand...
Click to collapse
xanda143 said:
BTW readme is exrtremly clear that it dosnt contain any bootloader files which i guess since i did the other thing would make this irrelavant and i could just go to the 2nd instructions but ill do to the T. BIG THANKS
Click to expand...
Click to collapse
In that case, flash the first link I gave you. Which is the non-bootloaders version.
Usually, the older one clicks flashes the bootloaders.

Categories

Resources