When I do #*#*info*#*# I see my phone is set to WCDMA preferred. Is this the best choice ?, I live in an area where my phone spends a lot of time with only gprs coverage and data transfer in gprs mode seems to be very flaky, works sometimes but often nothing comes through ?
Sent from my HTC Incredible S using XDA Premium App
Preferred is the best choice if your area doesn't have strong 3g/4g signal. Where I live I have strong 3g/4g signal so I set my phone to WCDMA only.
Only downside is when you hit a dead area with a weak signal you lose all connection because the phone is set to work on 3g/4g only. Can't make a call or surf the web.
If you don't want your phone switching to gprs set your phone to WCDMA only.
Sent from my HTC Incredible S using XDA App
Thanks.
What about GSM/CDMA auto (PRL) I seem to recall from my HTC Hero days that people were recommending to set to that, but can't remember the reason (might have been a battery reason)
Sent from my HTC Incredible S using XDA Premium App
gudge said:
Thanks.
What about GSM/CDMA auto (PRL) I seem to recall from my HTC Hero days that people were recommending to set to that, but can't remember the reason (might have been a battery reason)
Sent from my HTC Incredible S using XDA Premium App
Click to expand...
Click to collapse
I never tested it out but supposedly preferred option favors 3g/4g and the auto option favors edge. Auto option saves battery because its looking for a weaker signal. There is a link below that talks about the option on the Nexus One in more detail.
http://forum.xda-developers.com/showthread.php?t=688492
Sent from my HTC Incredible S using XDA App
Hey thanks for the info and link, I'm going to give auto prl a go, cheers
Sent from my HTC Incredible S using XDA Premium App
Related
Hey I was wondering if there was a way to only be connected to sprints evdo 3g network I live in a somewhat rural area and I do have 3g just not that great and it randomly drops down to 1x its anoying because when I toggle airplane on and of it'll go back to 3g witch is frustrating when watching videos is there an app or hack to let me, stay on 3g I've tried toggle 2g but its not working or is there a radio that would help me out there is a Verizon tower a mile up the road that I roam of off sometimes I am fully rooted and my current Rom is team fu sprint froyosense gratia port 8.5 and I use clockworkmod recovery
Sent from my HERO200 using XDA App
Bierce22 said:
Hey I was wondering if there was a way to only be connected to sprints evdo 3g network I live in a somewhat rural area and I do have 3g just not that great and it randomly drops down to 1x its anoying because when I toggle airplane on and of it'll go back to 3g witch is frustrating when watching videos is there an app or hack to let me, stay on 3g I've tried toggle 2g but its not working or is there a radio that would help me out there is a Verizon tower a mile up the road that I roam of off sometimes I am fully rooted and my current Rom is team fu sprint froyosense gratia port 8.5 and I use clockworkmod recovery
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
You could try the newest radio or try a Sprint airave?
I've got the latest radio but what's Sprint airwaves
Sent from my HERO200 using XDA App
Bierce22 said:
I've got the latest radio but what's Sprint airwaves
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
It's a unit that you get from Sprint for areas with low signal... here's more info
I don't have a computer I just use my phone for all my browsing needs lol
Sent from my HERO200 using XDA App
Bierce22 said:
I don't have a computer I just use my phone for all my browsing needs lol
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Still, take a look at the link You can do it on your phone!
Bierce22 said:
Hey I was wondering if there was a way to only be connected to sprints evdo 3g network I live in a somewhat rural area and I do have 3g just not that great and it randomly drops down to 1x its anoying because when I toggle airplane on and of it'll go back to 3g witch is frustrating when watching videos is there an app or hack to let me, stay on 3g I've tried toggle 2g but its not working or is there a radio that would help me out there is a Verizon tower a mile up the road that I roam of off sometimes I am fully rooted and my current Rom is team fu sprint froyosense gratia port 8.5 and I use clockworkmod recovery
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
you could try entering ##3282# , please wait while initiating...click edit mode, enter your msl. you can call sprint for your msl or run logcat and find the six digit number in there.
click on evdo, then click preferred mode. you should see automatic, hdr only, digital only, cdma only. try using digital only, it should run evdo only. also try hdr only as it should also only run in digital.
I tried entering that number and it says.the number or code u enterd is incorrect
Sent from my HERO200 using XDA App
Bierce22 said:
I tried entering that number and it says.the number or code u enterd is incorrect
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
if you have a cdma hero, open your phone dialer and enter ##3282#, its ##DATA# - then wait. you should not receive an error. ill google around but ##3282# should get you in there
It's still doing it
Sent from my HERO200 using XDA App
tailsthecat3 said:
if you have a cdma hero, open your phone dialer and enter ##3282#, its ##DATA# - then wait. you should not receive an error. ill google around but ##3282# should get you in there
Click to expand...
Click to collapse
That will only work if you're running a SenseUI (sucks, I know) ROM that has QPST on it. Flash a rom such as Nfinite's NFX or something like that. Then those ##xxxx# codes will work.
I believe you can still access basically the same menu on an aosp rom, don't remember the *#*#XXXX#*#* code though
You could check the market for an app called "network" or something similar. It may open it up
The Rom I'm using is froyosense but its from the gratia witch is a European phone
Sent from my HERO200 using XDA App
Bierce22 said:
The Rom I'm using is froyosense but its from the gratia witch is a European phone
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
I can confirm, you need to use NFX 2.1 rom, as the FroyoSense is a GSM rom that is ported over to CDMA hero, and GSM roms dont use EPST as CDMA phones do...
So if I did the data thing would it still work if I switched back to this Rom
Sent from my HERO200 using XDA App
Well this seems to be working I switched back to nfx hero and there's a root app for cdma phones called msl reader I went to the settings selected evdo set it to hdr then I went to the top forgot what its called then hit enable then I pressed comit chAnges and it rebooted now its staying on evdo but will it still be saved in the settings if I switch back to a gsm Rom
Sent from my HERO200 using XDA App
tailsthecat3 said:
you could try entering ##3282# , please wait while initiating...click edit mode, enter your msl. you can call sprint for your msl or run logcat and find the six digit number in there.
click on evdo, then click preferred mode. you should see automatic, hdr only, digital only, cdma only. try using digital only, it should run evdo only. also try hdr only as it should also only run in digital.
Click to expand...
Click to collapse
Yea this is definitely working I had to go back to nfx hero but I love that Rom anyway thank you so much I don't look like an idiot anymore walking around my room trying to switch back to 3g I'm stoked lol
Sent from my HERO200 using XDA App
Bierce22 said:
Yea this is definitely working I had to go back to nfx hero but I love that Rom anyway thank you so much I don't look like an idiot anymore walking around my room trying to switch back to 3g I'm stoked lol
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
thats great. glad i could help you out. be aware that while running evdo/digital only you wont be able to receive or place calls. calls use 1x and if im not mistaken, sms also needs 1x. thats how it was back in the day, anyway. so if you use the device strictly as a modem then you dont have to worry about switching back when youre finished with your data'ing.
tailsthecat3 said:
thats great. glad i could help you out. be aware that while running evdo/digital only you wont be able to receive or place calls. calls use 1x and if im not mistaken, sms also needs 1x. thats how it was back in the day, anyway. so if you use the device strictly as a modem then you dont have to worry about switching back when youre finished with your data'ing.
Click to expand...
Click to collapse
Actually no ive been texting and made a couple calls this morning it will still drop to 1x when u need it to so I just pretty much did away with 2g permitly lol
Sent from my HERO200 using XDA App
interesting. which setting did you choose?
Hdr only and I enabled something at the top
Sent from my HERO200 using XDA App
Hi all! I am new here and my english isnt very good but here we go.
When i use my cell on 3g the signal fall inmediately. I only use it on 2g for that reason. Help me please.
Sent from my Nexus One using XDA App
You can try forcing your phone to 3G. On your phone dialer, type in *#*#4636#*#* select phone settings, then scroll down and set preferred network type to WCDMA only...
Make a note of the setting before you change it, so that you can switch it back, if you need to...
Sent from my Nexus One using XDA App
I use gsm. I am from dominican republic.
Sent from my Nexus One using XDA App
Who is your carrier?
Do don't have the AT&T version by any chance, do you?
What are the last 4 digits of the serial number?
9100 or 9110?
Sent from my Nexus One using XDA App
Sorry but what number? Where is that number?
Sent from my Nexus One using XDA App
Under your battery...
Sent from my Nexus One using XDA App
My serial number is 9100
Sent from my Nexus One using XDA App
That's the T-mobile version.
Compare the frequency range of your phone with the operating frequencies of your carrier...
Though, I'm not really sure it masters for GSM (I think the range is the same for both phone versions - 850/900/1800/1900)
Sent from my Nexus One using XDA App
I think that is not the problem couse when I select 3g this put it next to the signal but just for e few minutes, then the signal fall down. I need to use 2g for the signal not fall down.
Sent from my Nexus One using XDA App
Ok. So you have the T-mobile / International version of the phone (the only other version is the AT&T version). The version you have supports the following frequencies for 3G : 900MHz, 1700MHz and 2100MHz.
What Carrier do you have (who is your phone service through?) Doing a quick search shows that CLARO (CompaƱia Dominicana de Telefonos, S.A.) is using 850MHz for their 3G. Not sure who you have. (http://92.52.91.22/maps/network.php...ners_info.php&hidcmappath=gsma/do/21989/comb/).
Also do this:
Type *#*#4636#*#* on your phone.
Select 'phone information'.
Scroll down to where it says 'set preferred network type'
What does it say?
My currier is orange Dominicana and their frequencies are 900hz. If i select 3g this put it next to signal but then the internet fall down, when the correct is that if in 3g does not work kept on 2g. But not is so, when the signal fall down is necesary put it in 2g if I whant to continue using the Internet.
Sent from my Nexus One using XDA App
31mbps is nice!! but i have lte at work and home and my battery is getting killed! I'm on rumraiders beta11....any way to switch between lte and hspa manually???
Sent from my HTC PH39100 using XDA App
Use apn settings
Sent from my HTC Raider X710e using xda premium
I've searched...so any elaboration would be awesome...i can get into my apn settings, but there has to be an easier way than to rewrite the apn every time...
Sent from my HTC PH39100 using XDA App
i n the network settings i have GSM/WCDMA/LTE or GSM/WCDMA I set mine to the second option and can't be bothered.
When i do it in network settings, it goes right back into lte auto
Sent from my HTC PH39100 using XDA App
morganblackstone said:
I've searched...so any elaboration would be awesome...i can get into my apn settings, but there has to be an easier way than to rewrite the apn every time...
Sent from my HTC PH39100 using XDA App
Click to expand...
Click to collapse
Make a new APN and pick it whenever you don't want LTE.
Sent from my HTC Holiday X710a using XDA Premium app.
morganblackstone said:
31mbps is nice!! but i have lte at work and home and my battery is getting killed! I'm on rumraiders beta11....any way to switch between lte and hspa manually???
Sent from my HTC PH39100 using XDA App
Click to expand...
Click to collapse
Or type in dialer *#*#4636#*#* scroll down adn select what you want.
best way
zombie.raised said:
Or type in dialer *#*#4636#*#* scroll down adn select what you want.
Click to expand...
Click to collapse
seems to be the best way for custom roms ATM
zombie.raised said:
Or type in dialer *#*#4636#*#* scroll down adn select what you want.
Click to expand...
Click to collapse
It does not retain the Selected APN. It automatically reverts back to LTE.
Hmm it should retain till it looses signal at least that how I saw my device behave.
The other option I can think of is use build.prop editor app and turn off from there. May be I should try to write my app for this .
Sent from my HTC Raider X710e using XDA App
zombie.raised said:
Hmm it should retain till it looses signal at least that how I saw my device behave.
The other option I can think of is use build.prop editor app and turn off from there. May be I should try to write my app for this .
Sent from my HTC Raider X710e using XDA App
Click to expand...
Click to collapse
App would be awsome.. I was using 4636 code on my aria and had no issues. For some reason , vivid does not retain it.
I have been looking for a rom that has the option open to select the preferred network type. I need to select gsm sometimes while troubleshooting the network and my modded aria would let me select the network type. It was loaded with cyanogen and I am wondering if I will have to wait til the cyanogen mod for the vivid is released to get control of this function. Having the ability to lock the phone into a select technology is very helpful when testing a cell site.
rft3ch said:
I have been looking for a rom that has the option open to select the preferred network type.
Click to expand...
Click to collapse
im looking for the same option too
but on stock ics vivid rom
Im using an app from play store called LTE OnOff and it serves the purpose.
I hat the option by default, but found it is also available in the app 4g test. Even allows to restrict to only lte.
Sent from my HTC PH39100 using XDA
Wondering why if I leave my one set to lte only it holds it with no problems but once I change it to the regular settings is mostly on 3g?
Sent from my HTCONE using xda app-developers app
there is no lte only in settings
flex360 said:
there is no lte only in settings
Click to expand...
Click to collapse
TRUE I forgot to mention *#*#4636#*#* here I chage it to LTE only and just to clarify there will be no voice.
MEGABYTEPR said:
Wondering why if I leave my one set to lte only it holds it with no problems but once I change it to the regular settings is mostly on 3g?
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
I understand if set to LTE only that it "holds onto LTE better" I suppose, but is it usable? Once the LTE gets to around -120dbs on the One it is unusable I read. Sometimes at my work it will be on LTE but the minute I start using and significant data it drops to 3G.
Does anyone have a issue while being on WiFi and the LTE is still being didplayed? My device does this is there a way to eliminate the LTE while being on WiFi?
Sent from my 831C using xda premium
nickhowell25 said:
Does anyone have a issue while being on WiFi and the LTE is still being didplayed? My device does this is there a way to eliminate the LTE while being on WiFi?
Sent from my 831C using xda premium
Click to expand...
Click to collapse
This phone prefers LTE, I have a very week and unstable LTE at my house so it's constantly cutting in and out. When I'm at home or work I set the phone to CDMA only. Look under mobile data settings. My battery lasts WAY longer and don't have a problem with getting calls. There is zero benefit to being on LTE when you are using wifi. Since LTE at the moment is data only. Only annoying part is switching it back and forth. I wish there was a widget for it or could set tasker to do it automatically.
Sent from my HTC One M8 using XDA Premium 4 mobile app
Sim-X said:
This phone prefers LTE, I have a very week and unstable LTE at my house so it's constantly cutting in and out. When I'm at home or work I set the phone to CDMA only. Look under mobile data settings. My battery lasts WAY longer and don't have a problem with getting calls. There is zero benefit to being on LTE when you are using wifi. Since LTE at the moment is data only. Only annoying part is switching it back and forth. I wish there was a widget for it or could set tasker to do it automatically.
Sent from my HTC One M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yea
LTE is built in to the SoC so when activated, it doesn't turn off. Unlike previous phones who had an external LTE radio, the battery usage is minimal. So overall you are saving battery. and true if you have weak or no LTE signal turning it off will help.
Sent from my 831C using xda app-developers app
drigout said:
LTE is built in to the SoC so when activated, it doesn't turn off. Unlike previous phones who had an external LTE radio, the battery usage is minimal. So overall you are saving battery. and true if you have weak or no LTE signal turning it off will help.
Sent from my 831C using xda app-developers app
Click to expand...
Click to collapse
SoC Im struggling to figure out what that means?
nickhowell25 said:
SoC Im struggling to figure out what that means?
Click to expand...
Click to collapse
SoC = System on a Chip so LTE, CPU, GPU, CDMA, 3G etc... Are all on 1 chip the Snapdragon 801. Older phones had separate components and used more power but the components could be turned off when not needed. When you are switching to CDMA only you are not just turning off LTE you are changing the core settings on the chip.
Sim-X said:
This phone prefers LTE, I have a very week and unstable LTE at my house so it's constantly cutting in and out. When I'm at home or work I set the phone to CDMA only. Look under mobile data settings. My battery lasts WAY longer and don't have a problem with getting calls. There is zero benefit to being on LTE when you are using wifi. Since LTE at the moment is data only. Only annoying part is switching it back and forth. I wish there was a widget for it or could set tasker to do it automatically.
Sent from my HTC One M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I most definitely agree. I have an Airave at home and I have to manually switch to CDMA only while at home for the phone to connect to it. I have a very weak LTE signal so the phone automatically tries to connect to it. Very frustrating. Called airave supprt who said they are aware of the problem and are trying to work on a solution, but for now just manually switch to CDMA only when I get home.