Related
Essentially I am at a lost of what to do.
I have tried everything to no prevail which leads to me to my defeat post here for a cry for help.
I DO NOT believe I have bricked it yet because I can still get into download mode and CVM but it doesn't look like this image: http://blog.laptopmag.com/wpress/wp.../Clockwork-Mod-Boot-Screen-e1279545586372.jpg
which is what I wanted. My original plan was to install a new ROM however, I do not have that option "install zip from sdcard". Therefore I had to install the Speedmod Kernel which is why
ANYWAYS moving on, I have tried Heimdall and Odin. I have been able to bootup the phone. HOWEVER it doesn't load a ROM because the Samsung Galaxy GT i9000 logo just keeps looping. Like I said, I am able to get into Download mode and CVM with the new menu. However, when I click anything the screen goes blank and nothing happens. I am at a complete loss of what to do. I have tried everything and I'm looking to advice.
Thanks and hope to hear from you all.
If I remember correctly the Speedmod Kernel uses the power button to select options and if you click the home button the screen will go black.
If this is not the issue then reverting to a stock Rom is probably your best option.
Find a stock Rom at: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa (this link is for international version) just select your country. from the links just above Firmwares for GT-I9000 .
From here you want to get a pit 512 & make sure you have a firmware with 3 files (PDA, Phone, CSC) . From here there are plenty tutorials on how to install a stock ROM.
If your issue is not pressing the wrong button in speedmod let me know and I'll be happy to provide a basic list of what to do... or provide a link.
Thanks for the quick reply, I have done that. I have installed the best one I could find: I9000XXJVQ
I put the following 4 files in Odin:
s1_odin_20100512 (PIT)
CODE (PDA)
CSC (CSC)
MODEM (PHONE)
It brings me to Android system recover <3e>. From there I'm at a lost at what to do. I see when it says
Code:
Copying media file
E:failed to mount. /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard you storage not prepared yet. please use UI menu for format and reboot actions.
Media files copy failed.
# MANUAL MODE #
Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/BMC/system/'.
Successfully applied multi-CSC.
From there I do not know what to do. When I click reboot system now; nothing occurs, the SGS image at the beginning still continues to loop. I'm looking at how to install the CVM so I can install my custom ROM.
I believe in the past I managed to do it (I installed the Dark Knight mod; but when it booted it said Encryption Unsuccessful and it only happened once. Was never able to get past that screen).
Anyways, that's the instruction from what I did above. What next (It's still looping at the SGS text at the startup).
EDIT:
From this post: http://forum.xda-developers.com/showpost.php?p=9336821&postcount=2
I then followed the install instructions for Root XXJVQ
The thing installed, it still has the issues. Opens the SGS start screen and doesn't go anywhere.
Further EDIT:
I then restarted the phone with following combination. (Power + Vol Up + Home). It then launched in CVM. I cleared partition and cache. I then installed the .zip ROM file (http://forum.xda-developers.com/showthread.php?t=1510940&highlight=cyanogen) from SD card. Rebooted system. It launches. Says "Encryption Unsuccessful" Please restart phone. I click the restart phone button. It restarts, I then get the android looking icon dead on the ground with it's chest open with a "Red triangle !" above it. Stuck from here.
Wish I could help further. In my experience I had to flash stock twice. Once with with pit file and repartition selected. Once without pit file and repartition unchecked.
From there to flash a custom ROM you need to get rid of 3e recovery by flashing something like CF-roof. Then once you have cf-root you can instal custom ROM.
Here is link for cf-root
http://forum.xda-developers.com/showthread.php?p=8238938
Sent from my GT-P7500 using xda premium
I did the above. It boots into CVM. I install the custom ROM. It counts down Waiting for SD Card to mount (20s, 19s, 18s....). Then it just restarts and keeps looping like that. Suggestions?
Unfortunately that is the end of what I know still fairly new to all this. Hourly someone else can help.
Sent from my GT-P7500 using xda premium
Dorianking said:
I did the above. It boots into CVM. I install the custom ROM. It counts down Waiting for SD Card to mount (20s, 19s, 18s....). Then it just restarts and keeps looping like that. Suggestions?
Click to expand...
Click to collapse
HOw long did it take for the ROM to install?
Have you tried removing the battery, battery back in recovery and reflash the ROM.
ICSSGS 4.2 has a requirement to be flashed twice. (different rom but may be similar issue)
Once to update the bootloader which will result in a boot loop when coming from a Gingerbread ROM and again to fully install the rom
Lastly download the ROM again checking the MD5 checksum before flashing
I trust that this will assist
Does it matter if it is installed from the External SD or Internal SD because when I try to install from the internal SD it says "Can't mount /emmc/" so I'm only able to install from the external SD.
I tried installing it twice. I still get the encryption unsuccessful screen. I also re-downloaded the ROM.
OK ii think what you need to do now is try to get the phone to boot successfully into a stock rom for your region.
You mentioned in the first 2 or 3 posts that you did download from SamFirmware a stock rom.
It is probably a Odin flashable ROM
Is it a 3 file or 1 file?
Flash and then boot up the phone to be able to use it.
If successfull move on to the next step.
If you have been able to do this before i would suggest to try a different ROM.
I can personally recomend the ICSSGS 4.2 ROM following the instructions on the opening post for that ROM
If this works then try Dark Knight or other ROM
If this post has helped please use the Thanks Button
Lexrsk said:
OK ii think what you need to do now is try to get the phone to boot successfully into a stock rom for your region.
You mentioned in the first 2 or 3 posts that you did download from SamFirmware a stock rom.
It is probably a Odin flashable ROM
Is it a 3 file or 1 file?
Flash and then boot up the phone to be able to use it.
If successfull move on to the next step.
Click to expand...
Click to collapse
Unfortunately, it does not boot into stock ROM. It just loops.
I tried to do it over again. I used a different firmware: I9000XXJVU_I9000OXAJVU_OXA
So let's begin by retracing everything I did.
1) I essentially did this: http://www.androidegis.com/how-to/learn-how-to-install-xxjvu-firmware-on-galaxy-s-i9000/ (so it had the 4 files: pit, PDA, Code & CSC)
2) After I did that, I went into Odin and Put this as PDA "CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS" and clicked start
3) It then loaded but it keep looping. I had a feeling it didn't have a ROM installed. I erased data, cache and etc. Then I installed the Dark Knight 3 ROM. Install by external SD because I couldn't get the internal SD to work "Can't mount /emmc/" error.
4) I then reboot. I get the ROM loading screen. Then boom, stuck on Encryption Unsuccessful.
5) I put it back in recovery mode and repeat step 3 again.
6) I get the encryption error again.
Pretty much stuck at there.
so what you are saying is that no matter what firmware you flash it will boot loop?
I personally would not be trying a ICS ROM until you can boot a gingerbread rom successfully.
I have personally softbricked my phone once where i then was able to get into 3BR but was unable to boot due to a bad flash reflashing a gingerbread rom a couple of times with odin worked for me.
Try reflashing your JVU rom 2 times in a row.
I assume that you are able to get into 3BR if so what happens if you try to mount /system is there a error message?
When the phone is boot looping what is displayed on the screen?
Dorianking said:
Unfortunately, it does not boot into stock ROM. It just loops.
I tried to do it over again. I used a different firmware: I9000XXJVU_I9000OXAJVU_OXA
So let's begin by retracing everything I did.
1) I essentially did this: http://www.androidegis.com/how-to/learn-how-to-install-xxjvu-firmware-on-galaxy-s-i9000/ (so it had the 4 files: pit, PDA, Code & CSC)
2) After I did that, I went into Odin and Put this as PDA "CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS" and clicked start
3) It then loaded but it keep looping. I had a feeling it didn't have a ROM installed. I erased data, cache and etc. Then I installed the Dark Knight 3 ROM. Install by external SD because I couldn't get the internal SD to work "Can't mount /emmc/" error.
4) I then reboot. I get the ROM loading screen. Then boom, stuck on Encryption Unsuccessful.
5) I put it back in recovery mode and repeat step 3 again.
6) I get the encryption error again.
Pretty much stuck at there.
Click to expand...
Click to collapse
from what you are doing it seems like you aren't doing what we say. Sorry if this is not the case.
1. Follow steps from your link above.
2. Attempt to reboot. Most likely you will be stuck in boot.
3. Flash again steps as link above. This time do not use pit and make sure repartition is unchecked.
4. Now boot. This time you should boot into stock.
5. Once in stock set USB debugging on and connect phone to PC and copy ROM you want to flash to internal sd card .
6. Flash CF-root with Odin.
8. Restart phone in to recovery and flash ROM on sd card.
Sorry to repeat this but none of what you say mentions flashing stock twice once with and once without repartition checked. You need to do this right after each other.
Sent from my GT-P7500 using xda premium
So your suggestion is to keep doing JVU flashing until I can get it to work? Do I just follow that instruction and do the flash once with the PIT file (and repartition) and do it again without the PIT file? If it still doesn't boot, what then?
The phone boot looping. RIGHT when you turn on the phone. It has that Samsung Galaxy I9000 screen. It just has that, goes black for like 2-3 seconds then resets itself over and over again.
There is no issue with mount /system. I believe when I try to mount /emmc, there is an error. This is important because this is what lets me access the internal SD.
scubadude said:
from what you are doing it seems like you aren't doing what we say. Sorry if this is not the case.
1. Follow steps from your link above.
2. Attempt to reboot. Most likely you will be stuck in boot.
3. Flash again steps as link above. This time do not use pit and make sure repartition is unchecked.
4. Now boot. This time you should boot into stock.
5. Once in stock set USB debugging on and connect phone to PC and copy ROM you want to flash to internal sd card .
6. Flash CF-root with Odin.
8. Restart phone in to recovery and flash ROM on sd card.
Sorry to repeat this but none of what you say mentions flashing stock twice once with and once without repartition checked. You need to do this right after each other.
Sent from my GT-P7500 using xda premium
Click to expand...
Click to collapse
After step number 1, I get this in the Android system recover <3e>
Code:
Copying media file
E:failed to mount. /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard you storage not prepared yet. please use UI menu for format and reboot actions.
Media files copy failed.
# MANUAL MODE #
Appling Multi-CSC...
Installing Multi-CSC
Can't access to '/system/csc/BMC/system/'.
Successfully applied multi-CSC.
I proceed to step 2. It doesn't boot so I do the 3BR.
I do step number 3, but step number 4 doesn't happen; I tried what you just said and it won't boot into the stock. It just goes into Android system recovery <3e> and the copying media files fails (both times I flash it). Just an error, still can reboot system and etc but I don't think anything happens.
This error on the second flash is
Code:
E:failed to mount /sdcard (file exists)
E: copy_dbdata_media: Can't mount /sdcard your storage not prepared yet. Please use UI menu for format and reboot actions.
Media files copy failed
#MANUAL MODE#
-- Applying Mutli-CSC...
Installing Multi-CSC
Can't acces to '/system/csc/BMC/system/'
Successfully applied multi-CSC.
Click Reboot Now is <3e>. Nothing happens, it boots up. Shows the first Samsung Galaxy S screen, does nothing. About to boot stock ROM but doesn't. Loops it back to the SGS screen once more. Then it just shuts off and a picture of a battery shows up?
If you are flashing through Odin twice all three files 1st time with pit and repartition checked, second time without pit and repartition unchecked and still have issues then I would say problem may be with phone but I am new to this myself. Only commenting and given suggestions as I had similar issues which I resolved with steps I mentioned.
Options would be to download another stock ROM and do a checksum to ensure it is fine, download a different version of Odin (i use odin 1.85) and a new 512 pit file, reinstall the drivers for the phone, try it all on a different PC. Also make sure kies is not running when you do this (kill any background services.for kies) and try disable your antivirus on your PC. Also remove external as card and Sim.
If these suggestions don't help try search google for those errors you are getting. That's what I have done and managed to sort every issue so far.
Sent from my GT-P7500 using xda premium
Ok lots of reading in past posts here's what I would do and it works everytime. Google links to xxjvu firmware and and use those three files plus pit 512 repartition checkedand flash. Then to root your phone simply go to darky website. But before you do any of that tell me what rom you were on before you flashed new kernel and what exactly were you trying to accomplish out of your phone. ie.end result and who your service provider is. If you pm me I can walk you through it no problem.
Sent from my GT-I9000 using Tapatalk
It was 2.3.3 I believe before I did it.
My goal is to put a nice custom ROM (looking towards Dark Knight 3).
I have no idea what the specific darky rom I need.
Service provider was Virgin Canada.
Been thinking. Have you tried using heimdal. Try search for a tutorial that flashes a stock ROM with heimdal.
Sent from my GT-P7500 using xda premium
What did you have before the problems? Was it a lagfixed rom with ext4 partitions?
I've had strange problems when I tried to flash stuff with a lagfix, try to flash your stock base, and then flash a kernel that supports ext4. See if it boots up. If it does, disable lagfix and then change to whatever you want
Hi,
I'm having a major issue with not being able to flash roms using clockworkmod for some strange reason.
I decided to move from MIUI rom because every time I gave it a chance when new versions came out, it constantly let me down with countless bugs and such. So, I've decided to go back to modified stock ROMs as they seem more reliable.
When I attempted to flash using clockworkmod (that comes with MIUI) it failed to apply the new (non-MIUI) ROM and forced it to go into a bootloop which knackered up going into recovery, so my only other option was to go into download mode and flash a stock ROM (I chose the latest, I9000XXJW4), root it, flash cyanogenmod and try again.
But unfortunately this did not work and now I'm stuck on the stock ROM.
I've taken a video of the exact moment it all goes wrong. Also, below is each step taken of the process.
youtube.com/watch?v=EmZAZ3DeL2U
1) Download Samsung Value Pack (I9000XXJW4) and CF-Root-XX_OXA_JW4-v4.4-CWM3RFS
2) Galaxy S rebooted to download mode
3) Used Odin3 1.85 to apply JW4_JW4_JW4.TAR file to the PDA section. Re-Partition is not checked.
4) Allowed the device to reboot to the home screen.
5) Powered off the device and booted back to download mode
6) Used Odin3 1.85 to apply CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.TAR to the PDA section. Re-Partition is not checked.
7) Allowed the device to reboot to the home screen (The video begins now).
8) Launched the CWM application (with root permissions) and rebooted to Recovery.
9) Wipe data/factory reset selected and confirmed
10) Wipe Dalvik Cache selected and confirmed
11) Format /system selected and confirmed
12) Install zip from SD Card, Choose Zip from sdcard and update-cm-7.1.0-GalaxyS-signed.zip selected and confirmed.
13) Here is an extract from the log that follows before rebooting:
- Finding update package...
- Opening update package...
- Installing update...
- Checking state of BML/MTD...
14) Self-Rebooted
15) Boot-loop
Any help is greatly appreciated!
Thanks,
Andy
when it bootloops it does it cause it just flashed the kernel and its trying to run the stock rom on the cynogen kernel. so pull the battery, put it back in. reboot into recovery and flash the rom again. it should work the second time cause its using the cynogen mods version of cwm recovery. let it boot it will take a while. but that should work.
dont forget to hit thanks!
taz0697 said:
when it bootloops it does it cause it just flashed the kernel and its trying to run the stock rom on the cynogen kernel. so pull the battery, put it back in. reboot into recovery and flash the rom again. it should work the second time cause its using the cynogen mods version of cwm recovery. let it boot it will take a while. but that should work.
dont forget to hit thanks!
Click to expand...
Click to collapse
Genius!
Thank You!
Cannot believe the solution was staring at me the entire time!!
So I updated the MIUI on my Cappy from whatever I had before to 2.3.30 that is GB 2.3.7 from this location:
http://miuiandroid.com/community/threads/archived-miui-versions-captivate-gb.16558/
I didnt care for it so I downloaded SlimICS. I downloaded the base and the cappy essentials. Put them both on my internal sd. I factory reset, wiped data, cache and system and dalvic, just as i do for every phone i work on. I ran the SlimICS base and now it keeps rebooting and going back into recovery and doing this:
Finding update package...
Opening update package...
Installing update...
Slim ICS
Once Slim ICS pops up, it reboots and does it all over. I can yank the battery and manually go into recovery, but if i try to boot it up normal, it goes back into the loop. I am on CWM 5.0.2.7 also.
So what did i miss?
GB bootloaders most likely missing - flash 'em using Heimdall. And SlimICS doesn't have modem. So. Flash my ROM for a change may be.
Sounds like you just need to flash again. You have to do that when you are going from GB to ICS, and vice versa I believe.
And you flashed the base and the cappy essentials right? Not just the base
Sent from my SGH-I897 using xda premium
korockinout13 said:
Sounds like you just need to flash again. You have to do that when you are going from GB to ICS, and vice versa I believe.
Click to expand...
Click to collapse
trying to flash again just put it back in the loop. And I read that that does happen alot going from GB to ICS on the Cappy. But for Slim it didnt work.
Wdustin1 said:
And you flashed the base and the cappy essentials right? Not just the base
Click to expand...
Click to collapse
I never could get that far because it was the base that I started to install and it got bootlooped on, everytime it restarted, it went back into recovery and started to run the base again, and repeated boot loop. I read somewhere that teamhacksung's rom would get me over the GB to ICS bridge. This one here:
http://forum.xda-developers.com/showthread.php?t=1363760
It did the bootloop to, but when i yanked the battery and went back in and installed it a 2nd time, it didnt restart and installed correctly. After that I installed SlimICS. But I dont like it as much as i thought i would and now when i try to reinstall teamhacksung ROM, it errors out during the beggining of the installation. The MD5 is still fine. I dont think it likes the version of CWM recovery that SlimICS installed. I know CWMR went to an older version when i went from teamhacksung to SlimICS.
Flash glitch kernel first. Also, don't use the builds from that thread, it is old. Just flash the latest CM9 nightly
Swyped from my ICS Samsung Captivate
Stuck in A boot loop after flashing paranoid rom to cappy i897
I downloaded all needed files to internal SD just as the (how to upgrade the captivate i897 to Paranoid ROM said to do )
wipe data factory reset,wipe cache,selected install zip zip>package (pa_captivatemtd-1.99-13AUGUST2012.zip, md5sum: cc03bacf0f07a94bf25b482d64b94e63) then it started boot looping / att screen twice then android guy ,, then falling over with exclamation point in the middle of him , let it go considering options of 3 button combo weren't working ,, beside guide said 5-10 min to install then it made it to devil kernel installed gapps >> (gapps-jb-20120726-signed.zip, md5sum: f62cfe4a827202899919fd932d5246d7) now back in the boot loop again>>
i did make a nandroid backup but cant seem to get into cwm recovery or download mode . I did follow that guide to a tee.
any help or suggestions on this i would greatly appreciated if this post in wrong spot sry im new.
Also stuck in bootloop reverting to Gingerbread
I am also stuck in boot loop after attempting to restore back into Gingerbread.
Here's how I got in this mess: I had been running Gingerbread on my Captivate for several months (rooted). I decided it was time to try upgrading to Jelly Bean (cm9 version). I installed ClockworkMod Recovery and that appeared to be working, so I made a NANDroid and proceeded to install CyanogenMod on my phone.
It booted OK, but I didn't like it and figured I'd just revert by restoring my NANDroid. Only thing is, it didn't restore correctly and my phone was stuck at the initial AT&T "bars" screen.
So I attempted to reboot in recovery and restore my latest update.zip. This did not seem to help at all. My phone would just boot to the AT&T screen and be stuck there. I checked to see adb was reachable behind the scenes but it wasn't.
After that I loaded Odin 1.85, downloaded a copy of the stock Captivate ROM, unzipped it and loaded it to my ROM (using the method described in this link I'm not allowed to show you because I'm a new user), more or less.
Odin said it was successful, but the phone is now still stuck in a boot loop. The ClockworkMod Recovery options are gone from the recovery menu. Now it looks like my stock recovery menu. There are some diagnostics on the recovery screen:
-- Copying media files --
E: failed to mount /dbdata (Invalid argument)
E: copy_dbdata_media: Can't mont /dbdata
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Applied CSC-code 'ATT'
Successfully copied multi-CSC.
-----
the bold text indicating errors appears in orange.
I tried "wipe data/factory reset" and "wipe cache partition" and rebooting. This had no apparent effect. The Captivate still continues to loop on reboot.
What next? It seems like it's missing something it needs to boot that's not in the standard Gingerbread Captivate image I downloaded with Odin. What else do I need to do? Keep in mind that right now the only way I can get files onto the phone is Odin (or similar) via the USB port. The phone never gets booted enough to get to it with adb, let alone mounting as a drive on my computer.
Thanks
Reply Back.
HG_User said:
I am also stuck in boot loop after attempting to restore back into Gingerbread.
Here's how I got in this mess: I had been running Gingerbread on my Captivate for several months (rooted). I decided it was time to try upgrading to Jelly Bean (cm9 version). I installed ClockworkMod Recovery and that appeared to be working, so I made a NANDroid and proceeded to install CyanogenMod on my phone.
It booted OK, but I didn't like it and figured I'd just revert by restoring my NANDroid. Only thing is, it didn't restore correctly and my phone was stuck at the initial AT&T "bars" screen.
So I attempted to reboot in recovery and restore my latest update.zip. This did not seem to help at all. My phone would just boot to the AT&T screen and be stuck there. I checked to see adb was reachable behind the scenes but it wasn't.
After that I loaded Odin 1.85, downloaded a copy of the stock Captivate ROM, unzipped it and loaded it to my ROM (using the method described in this link I'm not allowed to show you because I'm a new user), more or less.
Odin said it was successful, but the phone is now still stuck in a boot loop. The ClockworkMod Recovery options are gone from the recovery menu. Now it looks like my stock recovery menu. There are some diagnostics on the recovery screen:
-- Copying media files --
E: failed to mount /dbdata (Invalid argument)
E: copy_dbdata_media: Can't mont /dbdata
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Applied CSC-code 'ATT'
Successfully copied multi-CSC.
-----
the bold text indicating errors appears in orange.
I tried "wipe data/factory reset" and "wipe cache partition" and rebooting. This had no apparent effect. The Captivate still continues to loop on reboot.
What next? It seems like it's missing something it needs to boot that's not in the standard Gingerbread Captivate image I downloaded with Odin. What else do I need to do? Keep in mind that right now the only way I can get files onto the phone is Odin (or similar) via the USB port. The phone never gets booted enough to get to it with adb, let alone mounting as a drive on my computer.
Thanks
Click to expand...
Click to collapse
While searching threw all this mess on this site and various other :
I did stumble on something that might help u get your cwm
mode Look up Captivate Q&A the scroll to T, Russel thread has file needed to get your cwm mode working using rageagaistcage method.
Odin has multi file upload for stock alone check to make sure you selected right one . then just reflash should be good
mine i examine really thoroughly and figure out i try to jump to high .
i had stock then firefly then darkfire which is based off i900 <> Cappy rom bad <>idea on my part i try to jump to paranoid rom from darkfire '
don't think files were save to SD internal card - download section instead so firmware lost track of it self .
reviewing errors made on my part order 2 jig for my 2 cappys
my plan use jig get into download flash back to stock using odin one click using kies flash to froyo and stick with it for another six months
while reading everything i need to know about flashing that high up , besides that rom will become more stable less bugs and it will give me
time to see what errors occurs with this phone model on that rom last time i check there was only 7 posted user using it
again i was trying to flash paranoid rom for Samsung captivate SGH_I897'' I hope you get your issue resolved.
If u try one click unbrick and on win xp uninstall kies the drivers will not work together log in to administrator account <> just Google it if not on welcome screen there a few ways to get into that account,, but that did work for me on my cappy . let me know how u make out. ??
---------- Post added at 06:38 PM ---------- Previous post was at 06:27 PM ----------
321321wrick said:
While searching threw all this mess on this site and various other :
I did stumble on something that might help u get your cwm
mode Look up Captivate Q&A the scroll to T, Russel thread has file needed to get your cwm mode working using rageagaistcage method.
Odin has multi file upload for stock alone check to make sure you selected right one . then just reflash should be good
mine i examine really thoroughly and figure out i try to jump to high .
i had stock then firefly then darkfire which is based off i900 <> Cappy rom bad <>idea on my part i try to jump to paranoid rom from darkfire '
don't think files were save to SD internal card - download section instead so firmware lost track of it self .
reviewing errors made on my part order 2 jig for my 2 cappys
my plan use jig get into download flash back to stock using odin one click using kies flash to froyo and stick with it for another six months
while reading everything i need to know about flashing that high up , besides that rom will become more stable less bugs and it will give me
time to see what errors occurs with this phone model on that rom last time i check there was only 7 posted user using it
again i was trying to flash paranoid rom for Samsung captivate SGH_I897'' I hope you get your issue resolved.
If u try one click unbrick and on win xp uninstall kies the drivers will not work together log in to administrator account <> just Google it if not on welcome screen there a few ways to get into that account,, but that did work for me on my cappy . let me know how u make out.
There also Ginger Bread Boot loaders Needed for it to start up Correctly - i personally don't know that much bout gingerbread rom i didn't like it as much as froyo WiFi issues'' the the stock odin should erase all info on your part thou 'e use Is OCD 1 i897UCJF6>lowercase work every time for me.
cept now because my usb is not able to charge phone or enter download mode or recovery which leaves jig option .
Click to expand...
Click to collapse
HG_User,
U can't go back to GB (or froyo/eclair) from CM, MIUI, ICS, JB, AOSP etc., etc. without using Odin or Heimdall---because of the different partitions used---Stock firmware is bml/rfs and all the AOSP etc etc are mtd/yaffs(2).
And u can only restore a backup when u r back running the base rom where u made the back up.
Use this...Stock i897ucKK4 GB 2.3.5 with or without bootloaders... http://forum.xda-developers.com/showthread.php?p=18370912
This kk4 should get u going. Then u can use Odin to flash Corn Kernel to get a cwm back...:thumbup:
Sent from my SGH-I897 using xda premium
... one step on the way: Back to Eclair
thanks for the advice. Ultimately, I decided I should use Odin 3 1-click to revert back to original (2.1 Eclair) firmware that I found on the first post of thread titled
[STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
This is a huge step forward because it makes my phone work, but it's also a step back in time to the early Eclair days.
Now my next step is to upgrade back to Gingerbread...
Edit: Thanks to all who pointed me in the right direction. I took the phone back to Eclair then used Samsung KiesMini (twice) to get it back to Gingerbread. After re-rooting and removing the AT&T Bloatware, it works fine again. I might try upgrading again to ICS or JB, but I didn't like Cyanogen 9 at all. Maybe I'm just used to the way AT&T polishes the UI, but Cyanogen didn't appeal at all. Now looking for a relatively polished but lightweight ICS or JB version... Also, it would be nice if when I upgrade it preserves the installed apps and what's on my home screens, but that seems unlikely going from AT&T-branded Gingerbread to an independent ICS or JB.
Hi guys,
I have a bit of a problem with my Galaxy TAB GT-P1000 (european/unbranded).
I wanted to update it from stock 2.2 Froyo to Overcome or CM10.
1. I rooted the tablet (in fact I did this long ago).
2. I removed the bootloader protections according this guide:
http://forum.xda-developers.com/showthread.php?t=888071.
Everything OK.
3. Next step was to install the CWM - and this is where the things went awfully wrong
4. After installing the CWM (via Odin) at the next boot, the screen was corrupted, everything went on to "SAMSUNG" screen and rebooted. No recovery mode, but the download mode was still working.
5. My first thought was "bricked", but luckily, after searching in the forum, it should have been unbricked via a stock ROM install. So, I proceeded... downloading the stock ROM - for froyo - from samfirmware, geting the P1_add_hidden.pit, flashing with Odin, everything went OK
6. Well, wrong again... reboot (no screen corruption this time) but stuck with "SAMSUNG" screen with some strange haptic feedback (one short buzz and then 3 fast ones and repeating on and on and on).
This time I was able to go to recovery (standard menu... it seems that CWM was not installed), tried every option and there were no changes. Probably the most important thing is the fact that in the recovery menu, below the
reebot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
there are some lines in yellow and red:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA
your storage not prepared yet, please use UI menu for format and reebot actions.
copy default media content failed.
After reboot, same story with "SAMSUNG" screen and haptic feedback.
I tried to reinstall the stock Froyo (without the .pit file) - no luck.
Finally, the solution was to go here:
http://snappybytes.blogspot.hu/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
and follow the instructions.
I got back to the stock Froyo from where I started the whole thing, after half of day of trial-and-error and searching the XDA (and the net).
However, when I started to install Overcome - specifically Overcome_Kernel_v4.0.0.tar via Odin - after the file system replacement, I got back to the step 5 above and the dbdata error.
Fixed everything again, back to square 1!
To summarize:
- I'm with the original Froyo
- rooted
- bootloader patched (I'm safe)
But:
- I cannot install Overcome Kernel (it will throw me back to reinstall everything) - or, maybe, I'm doing it the wrong way, but I followed the guide here
- I cannot install CWM (didn't work form different sources, also not from kernel and from ROM Manager app I don't know what phone type to pick since there are only T-Mobile, VZW and AT&T)
- eventually, I cannot install Overcome (4.1.0)
I know it's quite a long post, but if somebody will have the patience to read all of it, maybe I'll receive some help on how to proceed next in order to get Overcome 4.1.0 on my Tab.
THX a lot guys
Install overcome using overcome method.
Read the guide.
All links in my signature.
You do need to flash gb-stock-safe-v5 first.
Not immediately flash overcome kernel.
Sent from my GT-P1000 using xda app-developers app
Thanks a lot for reading my post and for the help.
I was missing the step with the gb-stock (I tought that 2.2 Froyo as stock was enough - my bad).
Now I do have one more question: if I plan to upgrade further to one of the JB flavors (CM10, Sapir, etc.) do I need to perform all 3 steps:
1. GB_Stock_Safe_v5.tar
2. Overcome_Kernel_v4.0.0.tar
3. CM_10 (or whatever)?
THX
Correct. One more. flash cm10 twice, first time merely converts partition to MTD, then immediately flash gapps. Then reboot.
Get the right gapps for JB.
Sent from my GT-P1000 using xda app-developers app
Overcome stock has saved my ass numerous times. If all else fails, revert to it. OP, I have been in your situation too, it's all a learning curve. At least you didn't hard brick yours a day prior to selling lol
Sent from my GT-I9100 using xda premium
YABLP (Yet Another Boot Loop Problem)
Hi,
I'm having a devil of a time installing CM7 on my GalaxyS I9000. Description of my procedure and problem below.
I've been beating my head against a wall for a week so any help GREATLY appreciated.
-John
Phone: Galaxy S "I9000"
Trying to Flash: CM7.2.0 using CWM Recovery
What I did:
Flash stock ROM w/ODIN v1.85 - OK
Wipe Data/Wipe Cache
Flash ChainFire (CF-Root-XX_OVA_JVU_2.3.6-v4.3-XWM3RFS.tar) w/ODIN v1.85
Wipe Data/Wipe Cache
Phone now rooted OK
Boot to CWM Recovery
Install zip from sdcard
Select update on SDCard (cm-7.2.0-galaxysmtd.zip from CM site)
Flash completes in just a few seconds - much too quick!
Phone reboots automatically
Now stuck in boot loop
Screens in boot loop:
1. GalaxyS/GTI9000/Samsung
2. GalaxyS/Cyanogen(mod)
3. CWM menu scrolls by too quickly to read
Back to 1.
Tried Heimdall but complained about missing XML file
Tried installing "Datafix". Would not install (says not compatible with device)
Tried STFW: many reports of same problem but no solutions seemed relevant & appropriate
Clues:
After CF flash, disk use as follows
/system: used 27.3M, free 9.4M (97%) (seems pretty full)
/data: used 47M, free 1916M (2%) (seems pretty empty)
Me thinks maybe /system is too small/full to accept update?
This is the 3rd I9000 I've flashed. First 2 went Ok but this time it failed although identical files/procedures used (I think).
HELP!
I've seen a similar problem on my I9000 - I think the CWM scroll complains about "can't mount /data".
I'm in a similar position, I can't get anything to flash and boot though : http://forum.xda-developers.com/showthread.php?t=1967982
This happens pretty much every time you flash any kind of CM rom from stock. All you need to do is flash CM7, it will go in to bootloop with various text scrolling through thats too fast to read. You just pull battery while in the bootloop. Then replace battery, three button combo to recovery and flash the same CM7 zip again. This time the install will take a while longer. Afterwards flash gapps and reboot and you should be good to go.
I tried this - but same result, just spins round on the CM boot screen
Where do the wipe data and wipe cache commands fit in to this? Before/after both installs?
I don't normally bother with gapps - just trying to get it loaded. Does that make a difference?
Also, no SIM card in at all during all this...
IT WORKED!
Bless you BandiBp!
I'll be sending my first-born by return mail (please don't tell my wife
Yeah that happens because its flashes a kernel with a new partition system. Dunno why only a few roms warn people about this.
Sent from my GT-I9000 using xda premium
You're welcome mate, yeah the reasons are the new partition changes on different roms. I agree that rom flashers should be warned in advance about this. Would reduce problems A LOT. My general rule is if a Rom installs in under 5 secs, then you should always flash again.
Anyways have fun.