[Q] jmk stock question - Galaxy Tab Q&A, Help & Troubleshooting

when I get to this first step: 1) Extract the JMK-stock-safe.zip into a folder of your choice.
2) Now put your Tab into what’s call the “
Tab. Once shut/powered down, Hold down the Volume Down button and the Power button together
you get the following image appearing on your
“Download” mode. You can do this, by shutting/powering down your
Tab’s screen
do i put the file on the tab anywhere? also how do I know for sure that this is safe to do to my tab do I have to find out what version mine is before hand? Thanks.

Related

Procedure "How to flash Tre0 750 through bootlader using usb"

Procedure:
1.Download 1st firmware you want, i used this one "Treo750_2_23_ROW_EN_DesktopUpdater.exe" direct link http://download174.mediafire.com/b1c0ttuzd1tg/mdajuynnddz/treo750_2_23_row_en.rar
2. Extract the it using "7-zip" http://downloads.sourceforge.net/sevenzip/7z464.exe
3. Copy the extracted firmware "CHEEIMG_FW.nbh" put it in folder of
"RUUWrapper" , the one i selected is new bootloader
5. Put the phone in to Bootloader mode How?
Bootloader mode
1. turn phone on
2. press the MEDIA button AND at the same time with the stylus the RESET PIN
or remove and replace battery
the MEDIA button is the 3rd button on the left side of the phone, under the volume button
the RESET PIN is under the MINI SD card cover
1. keep holding the MEDIA button (left side of phone) untill you get the 3 color screen
6. Now you know what to do after this. "flash the phone"
7. after flashing Hard Reset the phone immediately how?
Hard reset
1. Press and hold the END (red power) key while pressing the pin reset button
2. Continue holding the power button until you see the "Erase all data" prompt
3. Push up on the 5-way to answer "yes" and wait until done
-------------
I successfully fix my customer phone with this procedure
phone problem:
"hang at the PALM splash screen with the grey indicator bar running 99% of the way at the bottom, then hanging"
B.R.
Lemor

[Guide] Full Tutorial To Install Custom ROM [GT-P6800]

thnxs to sk806,(go and thank him first)
First, you need to root your device. Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1.
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time.
After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON.
Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button.
You will again see some yellow writing and your device will be rooted.
After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1.
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here: http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1. THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20, below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB.
Then, copy "P6800_Recovery.tar" to your PC desktop.
Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe.
You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.). You want to click the button that says "PDA" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard". You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
***HIT THE THANKS BUTTON IF YOU FOUND THIS POST HELPFUL~***
Click to expand...
Click to collapse
Thanks for your work...
It would be nice if you could make the tutorial with picture and numerical steps.
Good tut love the afford. Some ppl could really use that.
(Edit) tnx goes to steve and you for posting
Verstuurd van mijn GT-P6800 met Tapatalk
Made it a little easier to read/follow for ya.
haidharbbc said:
thnxs to sk806,(go and thank him first)
OK, here you go:
First, you need to root your device.
Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time. After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON. Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button. You will again see some yellow writing and your device will be rooted. After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here:.http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1
THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20 (in italics), below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB. Then, copy "P6800_Recovery.tar" to your PC desktop. Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe. You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.).
You want to click the button that says "Recovery" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard".
You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
Click to expand...
Click to collapse
thnxs for updating it to easier to read for others
Sent from my GT-P6800 using xda premium
Hi!
The ODIN Mobile which I have use to install the Recover, then can I remove it because think about not use it any more???
thx, much appriciated, will try later
2 questions
a why is it necesarry to use clockword recovery ?
i flashed this stock tweaked rom in stock recovery without any problems
http://forum.xda-developers.com/showthread.php?t=1520888
b. is it possible to remove clockwork recovery in case of ...., go back to the old stock recovery of Samsung ?
Original Post
This is the tutorial as I wrote it...I suggest you edit the OP with this, or the version above. If you hit the "Quote" button below, you can copy the properly formatted text from the reply window (it will start with [QUOTE: blah blah], have "[*]" instead of numbers, and end with [QUOTE/]), and then copy and paste to your OP. Thanks.
Steve
First, you need to root your device. Download the link from this post: http://forum.xda-developers.com/showpost.php?p=21584547&postcount=1.
Put the file "root.zip" you just downloaded onto your EXTERNAL SDcard.
Then, power off the device.
When it's off (it'll buzz), press the volume up key (the one closer the power button) and the power key at the same time.
After a few seconds, the "Galaxy Tab 7.7" splash screen will come up. When it does, LET GO OF THE POWER BUTTON, BUT KEEP HOLDING THE VOLUME UP BUTTON.
Soon you will see some yellow writing on your screen saying the device is copying apks, etc. What is happening is you are booting into the tablet's stock recovery. After a bit, the yellow writing will go away, and then you will arrive at a blue menu.
Using the volume keys, select "install from external storage", then press the power button. You will arrive at a menu of your sd card.
Using the volume keys, select "root.zip" and press the power button.
You will again see some yellow writing and your device will be rooted.
After it's done, reboot the device by selecting reboot and pressing power (it may reboot automatically, I can't remember). You are now rooted!
Now that you are rooted, you need to flash the ported Clockwork Mod Recovery for this tablet onto your device. This is a custom recovery that will replace the stock one you saw before and allow you to flash custom ROMs...You can download the recovery .tar file in this post: http://forum.xda-developers.com/showpost.php?p=21957277&postcount=1.
You can flash the file your just downloaded, "P6800_Recovery.tar" one of two ways: with an app on the market called "Mobile ODIN", it costs a few dollars, or you can download a windows desktop version of ODIN here: http://forum.xda-developers.com/showpost.php?p=19760431&postcount=1. THE MOBILE ODIN METHOD IS MUCH EASIER, AND I HIGHLY RECOMMEND IT!!! If you choose to use Mobile Odin, proceed to the next step and skip steps 14-20, below. If you decide to go the desktop way, skip ahead to step 14.
If you are using Mobile Odin, you just copy the "P6800_Recovery.tar" file to your internal or external storage. Then open Open Mobile Odin. You will see a menu. Toward the bottom, you will see an option to "Open file". Select this and then navigate to the "P6800_Recovery.tar" it will load it up (you will see it in the "recovery" slot). Then hit "Flash Firmware". Wait while it does it's thing, and it will reboot automatically. When it reboots, you have successfully flashed Clockwork Mod Recovery onto your device.
If you use the desktop version, you need to first install Samsung Kies (Google it) to get the proper drivers for you PC to recognize your tablet when plugged in via USB.
Then, copy "P6800_Recovery.tar" to your PC desktop.
Then, you need to unzip the ODIN 1.85.zip you downloaded from the link above onto your desktop, go into the unzipped ODIN folder and run the Odin 1.85.exe.
You will be shown a GUI with a list of buttons on the lower right side (PIT, Recovery, CSC, PDA, Phone, etc.). You want to click the button that says "Recovery" and then, in the file selector, choose the "P6800_Recovery.tar" file.
Next you need to put your phone in "download" mode. To do this, power off the device. When it's off, press the VOLUME DOWN and power keys at the same time. When you see the "Galaxy Tab 7.7" splash screen, let go of the power button, but keep holding the volume down button (so, it's like booting into recovery, but with the volume down button, instead).
You will then be shown a caution prompt asking if you really want to enter download mode, hit the volume up key to select yes. Now, plug the tablet into the USB cable that came with your tablet and wait for windows to install the drivers (as noted above, this is why you installed Kies). You will know your device is properly connected when one of the windows in the upper left of the GUI has a yellow bar at the bottom of it and says COM:3 or whatever port you are on.
When you are sure your are connected, click the big Start button and it will go through the process, and your tablet will reboot automatically. You now have Clockwork Mod Recovery flashed to your tablet.
Once you have Clocwork Mod Recovery Flashed onto your device, the last step is to flash the custom ROM.
Download ROM zip file from the thread, then place it somewhere on the internal or external storage of your device, then power off.
Once your device is off, you will boot into recovery like you did above, press the volume up and power keys at the same time, and when you see the "Galaxy Tab 7.7" splash screen. let go of the power button, but hold the volume up key until you boot into clockwork mod recovery (you will see a blue menu again with a little logo of a hat on a gear.
As you will see, this is a different recovery from the one you booted into before, it is a custom recovery that will allow you to flash custom ROMs!
Using the volume keys and selecting with the power key, first perform "wipe data/factory reset". When that's done, perform "wipe cache partition".
When you have done these two wipes, select "Install zip from sdcard". You will then be shown a list of your sdcard's contents. Navigate to the ROM .zip file and press the power key. It will then ask you if you are sure, and select yes then press the power key. You will now see a little progress bar and a description of what is happening. It takes a while and your device will reboot automatically when it's finished.
That's it, you have a custom ROM on your tab!
yes..you can remove it after u install it..but just save it for later purpose my opinion
Sent from my GT-P6800 using xda premium
yarda,
i can't really answer for your 1st question..maybe steve dan help you..
for the 2nd question, i think by flashing the stock firmware and factory reset will do the trick
Sent from my GT-P6800 using xda premium
flashed clockword with odin mobile, it's easy
just follow the steps
now i'm capable to make a nandroid backup before flashing some other stuff
ok..thnxs for the feedback
Sent from my GT-P6800 using xda premium
Yarda said:
thx, much appriciated, will try later
2 questions
a why is it necesarry to use clockword recovery ?
i flashed this stock tweaked rom in stock recovery without any problems
http://forum.xda-developers.com/showthread.php?t=1520888
b. is it possible to remove clockwork recovery in case of ...., go back to the old stock recovery of Samsung ?
Click to expand...
Click to collapse
first question:
Why you can flash this ROM with your stock recovery, i look inside the script steve made and found that
-script mounting and unmounting /data and /system partition
-deleting file system from /data and /system partition
-moving file from zip to /system and /data partition
-making busybox symlinks
-installing kernel
-set some permission
All above process is support with edify script from stock recovery...( until now, i dont know if samsung lock it someday) thats why you can install steve ROM...
suwandiapr said:
first question:
Why you can flash this ROM with your stock recovery, i look inside the script steve made and found that
-script mounting and unmounting /data and /system partition
-deleting file system from /data and /system partition
-moving file from zip to /system and /data partition
-making busybox symlinks
-installing kernel
-set some permission
All above process is support with edify script from stock recovery...( until now, i dont know if samsung lock it someday) thats why you can install steve ROM...
Click to expand...
Click to collapse
This is correct. The tutorial was for all custom ROMs to come, not just my tweaked stock one. The fact that you can flash my ROM is because it is nothing too exotic (it's stock...) and the bootloader and recovery on the tab is not locked down. These things may change, and it is better to have the CWM recovery for that reason AND, especially, as noted in the post above, you can make NANDROID backups which you really should do before you flash a custom ROM...
Steve
thx for the explanation !
i now use CWM recovery, flashed with Odin mobile
great tut, but my CHINA P6800 will not accept any other ROM install for some reason. Yes, I have a brain and others confirm it's somehow locked. No f-ing idea how; more research after (endless) travel.
sk806 said:
This is correct. The tutorial was for all custom ROMs to come, not just my tweaked stock one. The fact that you can flash my ROM is because it is nothing too exotic (it's stock...) and the bootloader and recovery on the tab is not locked down. These things may change, and it is better to have the CWM recovery for that reason AND, especially, as noted in the post above, you can make NANDROID backups which you really should do before you flash a custom ROM...
Steve
Click to expand...
Click to collapse
This should be included in the tutorial imo.
so in a nutshell, we're bootloader unlocked, I can get my brand new HK galaxy tab 7.7 and root/CWM right away (like my OG tab) without having to do any Bootloader unlock method?
cheers
yes..mine juz straightly rooted..same like most of the others
Sent from my GT-P6800 using xda premium
Thanks Guy

[Q] Galaxy S I9000BVJVC root

Hello everyone,
I tried but I have not found,
I want a galaxy s rooter I9000BVJVC 2.3.5 and I do not know how, Odin does not seem to do ... Can someone tell me what to do?
Thank you in advance
After an intense examination of this thread, it has been determined that it does not contain development, thus does not belong in development. We are moving it for you, but please make sure you post correctly next time.
1. follow the instructions in the text file, HOWEVER,
2. if you have already done the kies mini update, skip that part and simply go in the phone and change the usb settings to use kies when plugged in.
3. reboot phone holding volume down, home, and power. this will allow the phone to go into download mode.
4. After the phone reboots, shut it down and hold the volume down and power button to boot into recovery mode.
5. navigate to the flashable_root_package (in recovery volume= up and down, power= select, and menu = back) select install zip from sdcard, then select "choose zip from sdcard", scroll down until you find "flashable_root_package.zip. Select this file and let it run.
6. Reboot the phone and you are all done!
Code:
http://forum.xda-developers.com/attachment.php?attachmentid=777681&d=1320871084

download mode GT-I9001

after reading a lot about how to get in the download mode of the GT-I9001, its still not working as it should.
i used the programme odin multi downloader. i followed every step, which is at the bottom of the message.
so I did everything except when I put my phone in download mode the programme doesnt regognise the phone.
I dont know what I can do next. The only way when the programme regonises my phone if its in the ramdump mode.
Anybody can help me?
1. Download the WORKED2.rar package (mirror 1, mirror 2);
2. Download Odin Multi Downloader version 4.43;
3. After expanding the WORKED2.rar archive, press the OPS button and select the AriesVE.ops file from the uncompressed archive;
4. Mark the One Package option, press the One Package button on the bottom of the window and select the recovery-clockwork-6.0.1.0-ariesve.tar.md5 file;
5. Put your device in Download Mode by pressing Volume Down + Home + Power and plug it to your PC;
Make sure to have installed the correct drivers and the phone should be recognised by Odin (the top left rectangle becomes yellow) and press the Start button.

[Q] [Need Help] Can't boot???

Hi all
Now,I'm using Note 3 AT&T (N900A). When I am using Odin to go to Recovery, then press Fail Odin, then I can not turn it on. Now, I can not use any buttons on the machine. When I press the Power button, the machine does not vibrate. The screen is dark. Anyone can help me? Thanks so much!!
P/s: sorry about my English.
Follow instructions word for word, take your time and go slow
1.Download the (alreadykitkat.zip) if you haven't done so yet.
2. Extract it to somewhere on your desktop or PC
3.Copy “Safestrap-Custom.apk” to your phones internal memory, and install it. Make sure you install recovery from within safestrap app, or verify that it is installed
4.Next copy the rom to your phones internal memory(it’s called XNote Port.zip)
5.Boot into download mode (power off, then hold-Volume down, Home and power button at same time
6.Open the “Togetsafestrap” folder and open Odin (win 7 and 8 users may need to run with administrator rights). Add the correct partition Files,
Make sure the files or AP_N900AUCUBMJ5.tar.md5 and BL_N900AUCUBMJ5.tar.md5 and verify your Odin window looks like this picture
7.Click start. Now when the phone is booting up make sure to click “recovery” on the safestrap screen.
(If you missed it just hold down, power button until phone reboots)
8. You can wipe before flashing (Optional) if you want a clean install. Flash the X-Note Port.zip to Stock slot,
But don’t reboot when done,
9. Keep hitting the back button until you see the reboot menu button
Press reboot menu button and select download mode button. Or if you messed up and rebooted just Press Volume down, Home and power button at same time until your back in download mode.
10. Now open the folder “togetbooting” and open Odin. Select the correct partition Files, Make sure you select AP_N900AUCECMGL.tar and BL_N900AUCECMGL.tar and verify your Odin window looks like this picture
11. Click start
done, enjoy the ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2654992
Sorry your phone isn't responding. Since you can't get into download mode, I recommend trying this method to restore.
http://forum.xda-developers.com/showthread.php?t=2476353
440bro said:
Sorry your phone isn't responding. Since you can't get into download mode, I recommend trying this method to restore.
http://forum.xda-developers.com/showthread.php?t=2476353
Click to expand...
Click to collapse
it wont work if he isn't on mi9. it wont let him downgrade.

Categories

Resources