[Q] Unable to Flash due to USB problems - Galaxy S I9000 Q&A, Help & Troubleshooting

My phone is screwed up. I can't go into recovery mode. But I can go into Downloading Mode though. So I decided to flash a stock ROM but I can't cause my computer doesn't recognize my USB. Used to be able to. Restarted computer, re-installed drivers. used different computers but still nothing happened. USB NOT RECOGNIZED
how to get my phone back up

does the phone still work ?

No, it doesn't boot. Stuck in Galaxy S first screen before the boot animation.

Same thing happened to me not so long ago. Once it was in download mode I opened odin and it wouldn't recognise it so I then went straight into download mode again using 3 button combo and it writhed as far as I recall.
Hope this helps
Galaxy S - no point in writing rom or kernel constantly changing!

Related

[Q] Botched Gingerbread install

So, I went to install gingerbread on my captivate, ripped from the nexus s, but I accidentally flashed the wrong thing. now my phone turns on to the att logo, then it goes away, then about 20 seconds later it comes back. I have been looking for hours on how to get to download mode, and I think that somehow I crippled my chances of using the 3 button combo. I know how to use abd to get to download mode, and my computer shows that my phone is connected when I plug it in at the att logo, but, my PC thinks its a nexus s and it can't find drivers for it. I updated my SDK but it still wont find drivers. is there anyway to install nexus s drivers or to get my phone into download mode without a jig?
Just take the battery out and plug in usb cable while holding volume up and down. (I had the same problem until someone suggested this)
that didn't do anything. if it matters, my phone wont even get to the battery charging screen with the usb cable plugged in, the spinning circle thing comes up for about 2 seconds, goes away, then comes back but its frozen the whole time, nothing else happens. My PC still sees that its plugged in, but, like I said, it thinks its a nexus s, and wont install drivers :/
PS: as to exactly what happened, I forgot to do the voodoo lagfix before trying to install the gingerbread dump from the nexus s, so I got into download mode and went back to 2.1. it was right after that when I realized that my three button combo wasnt working, so I was going to fix that by updating the bootloader, but accidentally loaded nsongs.tar instead of the tar that would fix my download mode combo, so in Odin, I had phone bootloader update checked when I flashed that
tortugasthebest said:
Just take the battery out and plug in usb cable while holding volume up and down. (I had the same problem until someone suggested this)
Click to expand...
Click to collapse
i had a successful install.....but my problem came when trying to revert to stock.
PC wouldn't recognize device and for the first time ever i couldn't get into download mode using method above or a 3 button method that worked for me (a slight variation to method stated above).
Finally the following worked:
1. open odin 1-click JF6
2. remove battery (and any external sd) from phone
3. plug phone into pc via USB (without battery in phone)
4. Hold Vol + / - toggle down simultaneously.
5. While holding the buttons down insert the battery. When i did this my phone entered DL mode almost immediately and i was able to use odin to get back to stock.
build 1007
I'd try the above method to get into DL mode.. if that doesn't work you can try the JIG and see if that works.
But a requirement before flashing was to verify that your buttons worked on your phone.
the buttons were working, but I didn't have a lagfix installed. I flashed back to stock and noticed that my buttons weren't working after that. I went to fix them but flashed nsongs.tar by accident, and I had the "phone bootloader update" box checked, so I'm thinking thats why my buttons aren't working now. I've tried that method above a couple times and nothings happened...
Hmm.. you can try and update using the Nexus S USB drivers.. if they are different from ours that is .. go to that forum and poke around to look for them.
At this point.. can't hurt trying anything.
Where would I find the nexus s drivers? I installed the samsung mobile phone drivers, but my computer still says "found new hardware - nexus s" anytime I plug in, and it shows up in device manager with a big yellow question mark.
avgjoegeek said:
I'd try the above method to get into DL mode.. if that doesn't work you can try the JIG and see if that works.
But a requirement before flashing was to verify that your buttons worked on your phone.
Click to expand...
Click to collapse
same as the poster
when i did my install my buttons were working as well....i have the 1007 build and never had any problem getting to recovery or dl using 2-button and 3-button combo's.
After the gingerbread flash was a different story though. Luckily for me the method i posted almost like jumpstarted me into DL mode....when i did that it went into DL faster than it ever had with the normal methods....the DL screen popped up almost the instant the battery connectors hit.
yea, none of the methods I've found have gotten me into download mode. Is there anyway to get the nexus s drivers so I can do this through adb? I don't have a car so getting to radioshack to buy resistors is kinda hard :/
ok, so I updated my sdk again and it now I have the drivers installed, I can use adb now, but whenever I do, adb reboot download, it reboots, but not to download mode, i goes right back to the boot loop. I was wondering if there was anyway to push a new bootloader onto my cappy using adb. that would be awesome

Stuck after bad rom flash, odin wont recognize

So heres the synopsis on what my issue is:
first of all-
phone: Samsung Captivate build 1010
current OS: (botched install of Darky 8)
problem: no recovery menu capability, stuck in reboot loop (will not go past ATT Logo), can go into download mode but odin does not see the phone
I botched a Darky 8 install. I attempted to install the rom to my captivate via rom manager but to no avail. I then decided to give the install a try via clockwork and had luck. the rom was not to my liking so I went to mount the internal sd and proceeded to delete all files internally to make a fresh odin install possible (as I always do). It was at the time of restarting my phone that I realized the rom I install was accidently the I9000 rom on my captivate, thus forth being a possible source of my issue. Currently I have a phone that is stuck in a reboot loop any time I plug it into a power source, or attempt to power it on. While in said loop the phone will not go past the ATT logo, and as it cycles, at the I9000 screen a robot voice pops up saying restore system. Ive attempted to reflash back to stock with the stock captivate odin3 OCD, but I am having no luck with the phone being recognized by odin (run as admin). I am currently running Mac OSX 10.6 with windows vista on Virtual Box 4.0, and have had luck previously with flashing the phone back to stock after I decided to try new versions of cognition. Currently my phone can only go into download mode and not recovery due to the boot loop. please help asap, this my only means of communication with my family on the other side of the states
Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.
CB650 Wolf said:
Try multiple USB ports/different computers if possible. I had a similar issue after flashing an i9000 rom. I could get into recovery but the power button wouldn't work for selections and in download mode my computer wouldn't recognize it. I just kept at it and eventually it worked.
Click to expand...
Click to collapse
going to try, redoing my virtual box in hopes that it was something stupid, and also trying the other usb port on my macbook.
Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App
butchatbg said:
Have you tried using a different cable? I had the same issue with a bad flash and Odin would not pick up my phone. If it did, it would nit complete the flash back to stock. I switched cables and it worked fine.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.
s0n1cm0nk3y said:
cable is fine considering I am still able to bring up the gadget serial on my virtual box with the phone.
Click to expand...
Click to collapse
Try using ADB..
Edit...misread
rickysa2000 said:
Try using ADB..
Click to expand...
Click to collapse
sadly I wished that work, I tried using adb reboot recovery, and in the attempt, the phone was not able to be detected. Should this be done in hopes to catch it at the right time in the boot loop or in download mode. Ive tried both.
So can you still get into Download mode? If so I would suggest finding another computer to use. For some reason, last week, my PC that I have been using to flash for months decided not to recognize my phone in download mode.
So I switched to my laptop, loaded the ROM. I tried reinstalling drivers and all kinds of stuff but nothing worked. I backed up my PC and re-imaged it and it's working again.
Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.
avgjoegeek said:
Another person on here had to go and manually remove all references to the USB Driver and re-install it.
I would say just try re-installing (with the phone in DL Mode) the USB drivers with the phone plugged in and see what happens then. Hopefully the OS will detect the phone and you should be golden.
And that mechanical voice is voodoo... need to be careful what folders your deleting even if you are going to flash ODIN.
Click to expand...
Click to collapse
Odd I was told your perfectly fine to do so, and then from there do an odin flash. Ive done it before, but oddly enough I think what screwed me was because I did it during while in the rom, vs while in 2.1. I just wanted to try to get a clean slate. doing the master clear code from samsung never really deletes the left overs from say clockwork and such on my internal sd.
problem was the virtual machine, plugged it into a friends computer and all was done within a couple of mins. leave it to emulation falling short :/

[Q] Tab totally unresponsive.

I have a Verizon Galaxy Tab 7-inch with WiFi and 3G running Android 2.2 (Froyo). I mistaking tried to flash the new Android 2.3.3 before realizing it was only for GSM phones. I followed all the instructions using Odin3 (1.7) and everything looked like it worked except it never rebooted and I never got it into the Recovery Mode. I was still able to get in Download Mode so I tried to find a compatible 2.2 ROM to flash. I flashed the Roto JME rom, it didn't reboot. I flashed P1000NUBJM2_P1000NUBJM2_P1000NUUBJM2_HOME and it didn't work. Odin3 seemed to install these, I always got PASS. Now my Tab is totally unresponsive. Odin3 acts like it's installing but I can't get the Download Mode screen anymore. How do I get it back to factory or some working system? I don't expect to save anything I've loaded, I just want it to work again. HELP. Thanks.
P.S. If I can't fix this, who do I take it to to re-install the system? I got it from Verizon.
Can you get it into recovery mode? (Turn off, then Power + Volume UP)
No success
No, nothing I do will show anything on the display. I can't get into Recovery Mode or Download Mode. However, when I'm hooked to the computer and press the correct buttons to turn on/off or Download Mode, I hear the computer beep indicating it sees the USB and the yellow COM widget in Odin3 lights up and says it's up and in Download Mode. I can then flash it and it says PASS. I also just tried Heimdall and it also seemed to successfully flash the original Verizon SCH-I800_VZM firmware. Nothing displays when I try to go into Recovery Mode. I don't even see the picture of the battery when I plug it into the wall. Have I somehow trashed by screen?
Hi ! I got the same problem and now my Tab totally bricked...
Samsung just needs to give us the files and software to load these tabs back to stock! That would end the return issue for the carriers and let us unbrick them. Like any other device, there is a way to fix it without having to send it back.
Sent from my ADR6400L using XDA Premium App

[Q] Frozen ATT boot screen, cant get into DL or Recovery mode! :confused:

Help, i may have bricked this thing. Tried to go from a 2.3.5 to ICS but couldn't get into recovery from the get go for some reason. Decided to DL Rom Manager to change the recovery but the option for Captivate wasn't listed in the flash options just nexus/ nexus 4g, epic 4g and i9000. I choose one of them. Which one i cant remember. Now phone wont go past att boot screen or the frozen battery screen when i plug in the usb. (no battery behind it just the star) after i use the jig without it booting, i plug in the usb to my pc and the screen will display the ATT boot screen instead of the battery screen for some reason, yet still no recognition in odin. I tried the 3 button, odin bat pull trick, adb, and jig with no success. Nothing will recognize it.
Any suggestions?
i897 - phone
win 7 x64 with VMware for linux
Go here... Captivate Connection Issues and Download Mode Help
And don't use the Rom Manager for the Captivate.
didnt work...........
Any other sugestions? I've tried everything on the list.

[Q] Samsung logo freeze, cant recovery, can download mode (cant join to pc)

Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Samsung logo freeze, cant recovery, can download mode (cant join to pc)
try with different usb cable
daniga74
Fariel2012 said:
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Click to expand...
Click to collapse
Hi there
you will need to give a usb jigg service to your device and then flsah it back to stock using odin
SGA s5830 stuck @ boot logo
I follwed these steps before it stuck @ boot logo
1 rooted phone through root_S5830.zip file
2 then used 6.0.4.6-cooper_fix.zip cwm recovery
3 decided to flash Touchwiz-Resurrected_ROM_V1.0.zip rom
4 followed all steps to flash thrrough CWM recovery
phone reebots samsung.com logo>> samsung boot animation shows up>>samsung name appears again keeps glowing and phone restarts!!!
after it I tried 6-7 different roms then i tried to flash through odin but wasnt able to do so but failed the device showed up in odin but wasnt able to flash stock rom
then i decided to go for Phil touch recovery I installed Philtouch recovery and tried to flash a custom rom now I'm stuck again at boot name GALAXY ACE s5830 nothing goes further!!!
I searched over XDA and some guy quoted this problem is solvable by using odin and putting phone in downloading mode (vol- button+home button + Power on ) I am able to put my phone in downloading mode, but when i conncet it to PC it says USB device not recognized WTF!!!!!???? 10 mins ago i connected my Phone using same cable same port same odin now this ***** appears ???
I swapped PC's, Cables, ports everything nothings working , phone wont start stuck @ boot logo pls help ASAP :crying:
That's it.. You have hard bricked your phone that's dead recovery and dead download mode. Give your phone the usb jigg service which will force it to go to either the download mode or the recovery mode whatever you want.

Categories

Resources