hi everyone ,i'm a new user .
as title i make this question.i often connect to internet by 3g connection.i went to setting/mobile network then i set data connection: on,3g connection: on and my country APN.My Hd7 work well ,but only "use 3g connection when availale". it almost switch to 2g network
Anybody have ideas to solve it ?it really really necessary for me
Sorry for my bad English,hope you understand my problem
Go to the dialer. Type ##3282#. Go to settings, under 'Network Type', choose 3G only. If it's already on 3G only (I think it moves back and forth between 2G only and 3G only while on Automatic mode), change it to 2G only, then back to 3G only. This will keep it on 3G only.
thank you very much.i solved it
hello friends I have a t-mobile hd7 but I'm from Colombia, they know how I can make it work on 3G network here in Colombia because it only works on 2g
Related
I have just got the HTC Mteor but I can't get it to work with GPRS on orange PAYG or Contract. I saw some files on this forum but it won't let me run them on the phone. Can anyone help me set it up please?
sorry to havent answerd your question in other thread...
when this from my post don't works:
http://forum.xda-developers.com/showpost.php?p=1244877&postcount=8
just google for the correct settings from your provider!!
or just call them that they say you the settings!!
also my provider has a map on his webpage where i can check what coverage is available in my location!!
also when you see the 3g symbol in top bar you are in a 3g location!
maybe you must have a special contract with your provider to start connections in 3g area?!
just try to set bandwidch to GSM (means only GPRS/EDGE) and test the connection!!
if this works your provider maybe have lock if you haven't a special "3g Contract"
I tried to contact Orange but they didn't have this phone on their list and then they gave me some settings that didn't work?
I don't think this phone works on 3G actually. I know it has GPRS covergae because there is always a letter "G" on the top of the screen. If anyone else has this phone on Orange then can you let me know what setting you are using please.
when your provider supports 3g then your phone have no problems!!!
UMTS is supported by mteor from factory out!!
HSDPA Supports is added with actuell Shipped ROM !!!
when you only have the G icon it means you have only configured (in bandwitch selection gsm) or your network coverage has only GPRS available!!
just check the settings under settings/phone/bandwitch(?!)
there are 2 lines first band: 1. AUto 2. GSM 3. WCDMA (=3g, hsdpa)
2nd is the region... should normaly be on auto...
I just checked the setting that you mentioned and it was set to auto on both options. I tried setting to the 3G and it said that it was not possible to connect when I typed in an internet address on internet explorer.
maybe you have not 3g coverage at your location!! or your contract didn allow 3g connection!! ask your provider!!
when configuring the data connection look to the modem options there you can select different modems .. just try gprs only
When I set my Diamond to Auto configuration it always chooses GSM with GPRS data, I believe its because the signal is stronger than 3G.. If I set the phone to 3G it works fine (almost always shows full signal strenght). But at my work I have no 3G signal, and I need to manually set the phone to "auto" och GSM again, and it wont change back to 3G when there is 3G in range again (even if I choose Auto).
So, my question is, is there any app or solution to ALWAYS be connected to 3G when there is enough signal, if not, it will choose GSM until it finds the 3G signal again?
Im getting quite irritated when I need to change the band manually several times a day...
Thanks..
Hello
I have diferent problem but i try to find some application to fast switch band from gsm to auto and auto to gsm
Thanks
Nicolas
mil_house said:
Hello
I have diferent problem but i try to find some application to fast switch band from gsm to auto and auto to gsm
Thanks
Nicolas
Click to expand...
Click to collapse
Advanced Config has an option to add a '3G' button to CommManager which does exactly what you want.
What I would really like however, is a 3G button that toggles between '3G' and 'GSM', rather than 'Auto' and 'GSM'
Anyone ?
Hi Guys,
I have been having a problem with Ho! No! ROM. I am in India on AIRTEL 3G. Whenever I switch to 2G Network I tend to loose signal and after sometime the signal gets completely lost (EMERGENCY CALLS ONLY is shown). If I remain in 3G only, everything works fine but battery usage is obviously more. Moreover, recently after HO! NO! CM 7.1.3 I am not getting 3G speeds while internet browsing while being on 3G network.
My Mobile Network Settings are like:
Data Enabled: On
International Data Roaming: On
National Data Roaming: Off
Network Mode: GSM/WCDMA(auto mode)
Use only 2G Networks: Off
Do I need to change my radio/baseband according to India (where to find the same and how to do it?)
I didn't have any such problems on CM 7!!!
Please help me out guys!!!
sherichander said:
Hi Guys,
I have been having a problem with Ho! No! ROM. I am in India on AIRTEL 3G. Whenever I switch to 2G Network I tend to loose signal and after sometime the signal gets completely lost (EMERGENCY CALLS ONLY is shown). If I remain in 3G only, everything works fine but battery usage is obviously more. Moreover, recently after HO! NO! CM 7.1.3 I am not getting 3G speeds while internet browsing while being on 3G network.
My Mobile Network Settings are like:
Data Enabled: On
International Data Roaming: On
National Data Roaming: Off
Network Mode: GSM/WCDMA(auto mode)
Use only 2G Networks: Off
Do I need to change my radio/baseband according to India (where to find the same and how to do it?)
I didn't have any such problems on CM 7!!!
Please help me out guys!!!
Click to expand...
Click to collapse
I used MiniMod to switch my base band and now the 2G Signal loss problem is solved. But internet speed is still all messed up on both 2G and 3G. It seems like that this is a problem with HO! NO! ROM rather than base band as my internet browsing was working flawlessly on earlier HO! NO! ROMs without switching the base band.
i have shifted my data plan from 2g to 3g vodafone in india, can anyone advice if we need to change the settings in our note, as cannot find any difference in 2g and 3g...thanks in advance
yes the APN settings are different from GPRS.. check with the provider for the correct APN settings and enter it.. also you can check on their website.
when the phone is using 3G you should see 3G or H+ next to the signal indications
thanks bro, but i could find the solution, you need to go in settings and then in mobile networks, you should select wcdma option and then check the user data package..then it reflect's 3G or h+ and even speed..
Hi guys, I'm new to the forum and I live in Venezuela, I get the following thing I bought a blu r1hd of 16 gb on amazon, I got the computer and configured it to update to version 7.4.2, my sim Card is 3g, but then of the update marks me to 4g and the signal goes up and down, I have no connection to the internet or calls even having signal, suddenly changes to 3g and that's when I enter data and calls
The problem is that I really do not know what to do.
I hope, guys help me :crying:
rubensmuj said:
Hi guys, I'm new to the forum and I live in Venezuela, I get the following thing I bought a blu r1hd of 16 gb on amazon, I got the computer and configured it to update to version 7.4.2, my sim Card is 3g, but then of the update marks me to 4g and the signal goes up and down, I have no connection to the internet or calls even having signal, suddenly changes to 3g and that's when I enter data and calls
The problem is that I really do not know what to do.
I hope, guys help me :crying:
Click to expand...
Click to collapse
if you are sure it is the 4g as problem , you can .
1. settings
2. under wireless &networks section , select "more"
3. cellular networks
4. preferred network type
5. change selection until it is better (hopefully it helps)
mrmazak said:
if you are sure it is the 4g as problem , you can .
1. settings
2. under wireless &networks section , select "more"
3. cellular networks
4. preferred network type
5. change selection until it is better (hopefully it helps)
Click to expand...
Click to collapse
Ok I change it but it only gives me these options
Preferred network type
2g / 3g / 4g lte
2g / 3g / 4g
3g / 4g
2g only
If I put it in 2g only, it allows me to make calls
The problem of the update is that I add a new option called
4G LTE MODE IMPROVED when turning off the signal