Just something simple. Wallpaper and Splash Screen. Splash looks just like the wallpaper.
-I take no credits for the graphics, just the copying and pasting of the graphics to size correctly.
-Will make CyanogenMod version soon.
Tested on a myTouch4G, but written from this Incredible Splash Screen Tutorial so I assume any 480x800 device is good.
Just like any other:
Extract zip file
Place splash1.img in your tools folder
Open a command window and navigate to your tools folder
In command window:
adb devices
(verify your device is connected)
adb reboot bootloader
When in bootloader:
fastboot devices
(verify your device is connected)
fastboot flash splash1 splash1.img
Give it some time
Should get OK for two prompts and return back to command line.
Type:
fastboot reboot
You should now see the new splash screen.
Included is a seperate zip of just the wallpaper. The forum seems to convert it and make it look like crap.
Here is the little bit modified version of bootanimation from system dump of Xperia Play.
This boot animation has been modified to run in loop and give better effect on DHD as I didn't like the one which came from dump...
As usual try at your on risk I am not responsible for anything....
Use root explorer to copy the bootanimation file into /system/media, or use adb to pust the file....reboot and enjoy...
Also attached is the splash screen matching to bootanimation.
Unzip the splash and copy the splash img to same folder as fastboot. connect the phone in fast boot mode and run "fastboot flash splash1 splash.img" to use the new splash screen.
Have you screens of this bootanimation
HI
sorry my bad English
i have share successfully flash hp tab sate 7 voicetab
with sp flash tool
how to flash
Unpack FlashTools, and Click on Flash_tool.exe
Select a the MT6582_Android_scatter.txt in ROM
Wait file to be added into Flash Tool
choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed
Turn off your tablet.
"Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
and connect your phone into the computer via USB data cable.
The process will start and a red progress bar will appear after color purple, yellow.
And green circles display
Finish !
download flash file & flash tool
here flash file
here is tool
needrom asks for premium access, do you have a file saved on google drive ?
Note:
This is not bootanimation, this is the splash screen (the 'Coolpad' boot logo which is displayed when device is switched ON)
This is for Coolpad Cool1 Dual Snapdragon variants Only..
For other devices, please send me your splash.img so that I can create a tool for you too..
Requirements:
1. Rooted Coolpad Cool1 Dual (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this in computer: Coolpad_Cool1_Dual_Splash_Maker.zip
2. Make sure you have 4 pictures (same or different) in 1080x1920 px resolution in PNG format.
(It seems Coolpad displays any 1 picture from the 4 pictures randomly while switching ON, so I think you'll have to use 4 pictures)
3. Now rename your 4 pictures as logo1.png, logo2.png, logo3.png, logo4.png & replace it inside "pics" folder of the extracted folder.
(Similarly you can replace other pictures in it carefully if you wish)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. Thanks to @Vikasspattel who provided the stock splash.img of Coolpad Cool 1 Dual ..
2. This is just a modified version of my tool here: [GUIDE] How to Change Boot Logo (Splash Screen) of LeEco Le 2 / Le S3
Hit the Thanks :good: button if it worked for you
You're welcome to share the splash images that you created
Thank You sir for reading my comment and helped by your quick effort ,
well i had no hope but thank you so much
hi
i installed custom recovery to cool 1 c 103
after it finished model number changed to 106
what i have to do?????
Note:
This is not bootanimation, this is the splash screen (the 'Asus' boot logo which is displayed when device is switched ON)
This is for Asus Zenfone 4 Max Only (Snapdragon Variants)..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Zenfone 4 Max (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
0. Make sure fastboot is setup in your computer just in-case something gets ducked up
1. Download & Extract this: Asus_Zenfone_4_Max_Splash_Maker.zip
2. Make sure you have a picture with resolution 720x1280 or lower.
3. Now replace your picture on logo1.png and logo2.png inside "pics" folder of the extracted folder.
Note: You can put any picture format, but the names have to be 'logo1', 'logo2', etc.
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
Note:
You might get an error like "PICTURE IS LARGE IN SIZE" if it's not possible to create a logo with that picture.
In that case, try any one of these below:
a. Try compressPNG.com to reduce no. of colors in PNG picture.
Upload your picture, click Settings, reduce number of colors to 2, Apply & download it & try again.
b. Reduce the picture resolution.
For example, this picture:View attachment 4073256 can edited to something like this: View attachment 4073257
(Hope you understand what I say)
c. Try some other picture.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method to install:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. Based on my original tool for Redmi Note 5
2. @Gangster13 who provided the stock splash.img of Asus ZenFone 4 MAX ZC554KL
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Thank you very much for the tools and instructions! We will try!
will this also work on ZC520KL (Asus ZenFone 4 Max)
GokulNC said:
Note:
This is not bootanimation, this is the splash screen (the 'Asus' boot logo which is displayed when device is switched ON)
This is for Asus Zenfone 4 Max Only (Snapdragon Variants)..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Zenfone 4 Max (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
0. Make sure fastboot is setup in your computer just in-case something gets ducked up
1. Download & Extract this: Asus_Zenfone_4_Max_Splash_Maker.zip
2. Make sure you have a picture with resolution 720x1280 or lower.
3. Now replace your picture on logo1.png and logo2.png inside "pics" folder of the extracted folder.
Note: You can put any picture format, but the names have to be 'logo1', 'logo2', etc.
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder after completion.
Note:
You might get an error like "PICTURE IS LARGE IN SIZE" if it's not possible to create a logo with that picture.
In that case, try any one of these below:
a. Try compressPNG.com to reduce no. of colors in PNG picture.
Upload your picture, click Settings, reduce number of colors to 2, Apply & download it & try again.
b. Reduce the picture resolution.
For example, this picture:View attachment 4073256 can edited to something like this: View attachment 4073257
(Hope you understand what I say)
c. Try some other picture.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method to install:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. Based on my original tool for Redmi Note 5
2. @Gangster13 who provided the stock splash.img of Asus ZenFone 4 MAX ZC554KL
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Click to expand...
Click to collapse
Thank you.
I want to change bootlogo in my device. Can you help me this issue?
My devices is Asus ME181cx Memopad8 k011
can I use this for Asus Zenfone Live L1?
for asus zenfone max pro m1?