Database Develop

[Q] Can't send SMS / Text Message

Hi all,
Just got my new SGS...
One small problem: can't send sms messages. Did correct the SMSC number in Messaging application (+27829129).
But, when I use "*#*#4636#*#*" to check the SMSC, I get a completely wrong number.
The same sim card work fine on previous HTC Touch pro.....
Any ideas on how to fix this problem?
(Using Froyo I9000XXJPM via ODIN [http://forum.xda-developers.com/showthread.php?t=807886])
Thanks,
D.

did this happen after you updated your phone?
i had the same prob, i had to wipe the phone to get it to work again.

Can you receive text?
Talk to your wireless service provider before you jump the gun and wipe everything.
When I had an issue with sending text (not receiving), my provider sent me a special text (with some settings). It fixed my sending issue.

Did a factory reset and everything worked.
THEN, used SMS Backup and restore to restore all my old SMSes - and it stopped working again.
Seems as if there is a bad "SMS" somewhere in the sms store....
Deleted all messages and everything is working 100%.
D.

i have the same problem
i only on rogers with the i9000m
i sent a text this morning....but now that everytime i try to send something it said failed....
so i have to do a factory reset?

I'm having the same issue with rogers/i9000m
930929930 said:
i have the same problem
i only on rogers with the i9000m
i sent a text this morning....but now that everytime i try to send something it said failed....
so i have to do a factory reset?
Click to expand...
Click to collapse

Guys I have an issue too, I still can't send any messages, I am on 4.1.2 REMICS, I even flashed old 2.3.6 JVU and it didn't work on it too. Do I have to call my provider and ask him for the instructions?

No phone calls after Superuser update.

Hi,
Today I updated Superuser to v3.0-beta 3 (33) binary v3.0.3.2 and now I'm not able to make phone calls and when reboot or turn off phone, it frezzes (semi-black screen) and I need to remove battery.
I was on Market looking for some apps, when suddenly the phone started to be slow, then I got Superuser fail message and it offered me to updated, which I did. Everything went smootly, no error messages. After some hours I tried to make calls and found I'm almost not able. I say almost because for some numbers, after 20 or more seconds, the phone makes connection and releases the call. I tried also with 3G and Edge.
However, after all this I'm still able to receive calls and send sms.
This is my info:
Android 2.2.2
Kernel 2.6.32
SW Nova v7
What should I do? I'm hesitate to wipe out because I'm not sure if it will help, as SU does not modify when wipe out.
However, if flash is needed, it is ok. I don't have so much apps or info.
I appreciate your help.
Thank you.

Try a different card (SIM i mean)
If it's not working either, then do factory reset
AFAIK, factory reset in setting->privacy is more powerfull than wipe in CWM
CMIIW
Sent from derp-mobile

try to fix permissions too. Either via ROM Manager or CWM.

[Q] Rooted for the first time, lost any cellular connection. I need a step by step.

So I finally took the plunge today and rooted. I flashed the most recent Sprint version of ViperROM, and everything was going just fine and dandy, I was all giddy setting up my MoDaCo UI mods, etc, until I tried to send a text. Tried to send for 5 minutes, got the fail message. Well, that's weird. What about 3G data? Nope, nothing. Maybe the ROM is bad? I flashed the stock ROM by viperboy, also didn't work. Same problems. So now I'm stuck with no cellular connection and I need it soon. How do I fix it? (Note that I followed my tutorials step by step and everything works except cellular connection. Also note that it says I have service and that data is going in/out, but it's not actually sending/receiving anything. It seems that I need something called an RUU, but I have no idea what that is or where to get a correct one and how to flash it.
Please give me a step by step (I'm using TWRP if that matters), as this is my first time rooting or doing anything more advanced with my phone past advanced themes in Nova Launcher. I'll need links if you have them, or at least where to look. Please help me, because don't want to go back to stock after getting all my awesome tweaks already!
And yes, I have updated my PLR and Profile in the system updates menu, same results.
EDIT: I fixed it, yay! I tried clicking UICC unlock in the software update menu. It said no profile update available, and then it started working (it's actually faster than normal! ) It may have been the profile update that did it and it took a second to update, but it works now! Yay! I even rebooted to make sure it was going to stay after a shutdown, etc, and it did! I guess I should check all option before posting a thread next time... (If you can't tell I'm extremely happy it works!)
EDIT 2: It stopped working again :'(. Now I'm constantly losing the 3G connection that I "had" and messages and data only work about 10% of the time they say they're connected. Wifi still works. When I try updating the profile, it says it could not be updated and to try again later (this is after several tries and a reboot). I try to update the PLR and I get error code 1233. Apprently this is an HTC specific error with no know fix? I try to do the UICC unlock, and it gives me the same error as the profile message.
EDIT 3: It seems Sprint is having issues in my area, I will update again if they resolve it or reply to my tweet.
EDIT 4: They told me to go restart the booster thingy I have in my house, and now my connection is working for now...

[Q] Voice and Text Won't Work, Even After Unroot

Hey guys,
Yesterday, I flashed the LiquidSmooth ROM for the HTC One. After flashing the ROM, voice and text were not working (but it still showed that I had 4G) so I restored back to my previous CM11 ROM that I had before LiquidSmooth. Even in CM11 my voice and text were not working. So today, I decided to re-lock my bootloader and use the RUU file to unroot and go back to stock. It still doesn't even work! I cannot send or recieve texts, and when I try to make a call my 4G disappears and I get the error, "Unable to establish a wireless data connection. EHRPD: 0." I called my carrier (Ting) for help and they could not fix it. Can anyone please help me?

I'm having a similar issue. If I flash anything but Beanstalk, I can't send a text. If I flash Beanstalk, my bluetooth constantly crashes.

After Binary Update - Cannot Make Outgoing Calls...???

Hello Everyone...
Posting here first rather than in the "Update Failure" thread because I'm not so sure I have a "failure" with the update....just an issue after the udpate.
I have 2 cloned HTC M9 phones. I say "cloned" as they are exactly the same make, model, ROM, etc (one business, one personal phone). They have the following information if needed:
Sprint HTC M9
SuperSU Free v2.65
Custom ROM ViperOneM9 3.5.0 with no custom kernal
Android 5.1
HTC Sense 7.0
Kernal (standard) 3.10.49-perf-g26c593c
[email protected] #1
SMP PREEMPT
I updated some apps this as I normally do through Google Play. A little while afterward I was prompted to update the SU Binary. I did so on one of my phones. I hit the TWRP option (on the right side of the prompt screen), nothing happened, phone did not reset so I rebooted into recovery. The update ran automatically and the phone rebooted.
I noticed two issues (perhaps there are more). The huge problem is that I cannot make OUTGOING calls. I use a custom dialer PixelPhone Pro. I click on a contact to dial and nothing happens. I type in number to dial, hit the green "send" button to make the call, nothing happens.
I also tried the stock Phone app....same thing, cannot dial out.
I attempted to update the Profile and PRL for the phone, however, as that appears to need to make a "special call" that function is not working either
The other problem I noticed is with an app I have called Quick Settings. The app is always accessible through the pull-down notifications on the phone. Although the app is still installed and functional, it no longer appears in the pull-down notifications. I tried to reset the option to show it there (turning the option off and back on) and it will not show up despite the proper setting chosen.
I still have full root access as I tried a couple root apps (such as Titanium Pro) and have full root access.
I have been prompted on my other phone to update the SU Binary and I am concerned with doing so. Any idea why this is happening and how I can troubleshoot and fit my outgoing call issue??
THANK YOU all very much!!
Scott

Hey guys....
Anyone else have this issue or similar?? So what are my options....how do I get my phone back to being able to make calls??
Thank you for your help....
Scott

Scudderb said:
Hey guys....
Anyone else have this issue or similar?? So what are my options....how do I get my phone back to being able to make calls??
Thank you for your help....
Scott
Click to expand...
Click to collapse
**UPDATE**
Still problems....
Right after I first updated the binary the "only" problem was that I could not make calls which I could use the other functions of the phone. I rebooted the phone and I cannot reach any function of the phone because I constantly get the message "...the process com.android.phone has stopped" obviously related to the previous problems.
I dirty-flashed the ROM...that did no help. I even tried to flash an older SuperSU version (I don't know what that would have done....I'm running on HOPE now ) and that didn't help. Re-dirty-flashed the ROM a second time. Again that didn't help.
I flashed an old backup and THAT WORKED fine. Problem is that the backup is 6 months old. I could quit and totally clean/wipe/install the ROM and start again from scratch but I reeeeeeallly don't have time for that at the moment.
Is there ANY way I can simply get my com.android.phone process back?? Why did all this happen in the first place??
ANY help is greatly appreciated!! THANK YOU!!!