Database Develop

No phone calls after Superuser update.

Hi,
Today I updated Superuser to v3.0-beta 3 (33) binary v3.0.3.2 and now I'm not able to make phone calls and when reboot or turn off phone, it frezzes (semi-black screen) and I need to remove battery.
I was on Market looking for some apps, when suddenly the phone started to be slow, then I got Superuser fail message and it offered me to updated, which I did. Everything went smootly, no error messages. After some hours I tried to make calls and found I'm almost not able. I say almost because for some numbers, after 20 or more seconds, the phone makes connection and releases the call. I tried also with 3G and Edge.
However, after all this I'm still able to receive calls and send sms.
This is my info:
Android 2.2.2
Kernel 2.6.32
SW Nova v7
What should I do? I'm hesitate to wipe out because I'm not sure if it will help, as SU does not modify when wipe out.
However, if flash is needed, it is ok. I don't have so much apps or info.
I appreciate your help.
Thank you.

Try a different card (SIM i mean)
If it's not working either, then do factory reset
AFAIK, factory reset in setting->privacy is more powerfull than wipe in CWM
CMIIW
Sent from derp-mobile

try to fix permissions too. Either via ROM Manager or CWM.

[Q] Rooted for the first time, lost any cellular connection. I need a step by step.

So I finally took the plunge today and rooted. I flashed the most recent Sprint version of ViperROM, and everything was going just fine and dandy, I was all giddy setting up my MoDaCo UI mods, etc, until I tried to send a text. Tried to send for 5 minutes, got the fail message. Well, that's weird. What about 3G data? Nope, nothing. Maybe the ROM is bad? I flashed the stock ROM by viperboy, also didn't work. Same problems. So now I'm stuck with no cellular connection and I need it soon. How do I fix it? (Note that I followed my tutorials step by step and everything works except cellular connection. Also note that it says I have service and that data is going in/out, but it's not actually sending/receiving anything. It seems that I need something called an RUU, but I have no idea what that is or where to get a correct one and how to flash it.
Please give me a step by step (I'm using TWRP if that matters), as this is my first time rooting or doing anything more advanced with my phone past advanced themes in Nova Launcher. I'll need links if you have them, or at least where to look. Please help me, because don't want to go back to stock after getting all my awesome tweaks already!
And yes, I have updated my PLR and Profile in the system updates menu, same results.
EDIT: I fixed it, yay! I tried clicking UICC unlock in the software update menu. It said no profile update available, and then it started working (it's actually faster than normal! ) It may have been the profile update that did it and it took a second to update, but it works now! Yay! I even rebooted to make sure it was going to stay after a shutdown, etc, and it did! I guess I should check all option before posting a thread next time... (If you can't tell I'm extremely happy it works!)
EDIT 2: It stopped working again :'(. Now I'm constantly losing the 3G connection that I "had" and messages and data only work about 10% of the time they say they're connected. Wifi still works. When I try updating the profile, it says it could not be updated and to try again later (this is after several tries and a reboot). I try to update the PLR and I get error code 1233. Apprently this is an HTC specific error with no know fix? I try to do the UICC unlock, and it gives me the same error as the profile message.
EDIT 3: It seems Sprint is having issues in my area, I will update again if they resolve it or reply to my tweet.
EDIT 4: They told me to go restart the booster thingy I have in my house, and now my connection is working for now...

[Q] Holics ROM problems with Hangouts and process.acore

Hello,
So far Holic's ROM seems to be the only one without in-call volume problems on my Vivid (Bell Canada) but there are two problems, one more annoying than the other
first, most annoying problem: after I install, the phone will upgrade to the latest apps like Hangouts. Everything works great, I can start hangouts and chat.
But after some time (5 to 10 minutes) of the phone just sitting there, or especially after a reboot, I will get the "google play services is not supported by your device" error. I have to remove update to google play store and resintall it, and then problem goes away temporarily and hangouts is usable again, and after the next reboot same problems reappear.
Does anyone have any fix for this?
second problem, less annoying:
On the phone dialer, there is a button at the bottom right which looks like a button for calling voicemail (has some funny symbols on it)
if I press this button I get error message "Android.process.acore has stopped unexpectedly". Does anyone else have this?
My phone is S-ON
I reinstalled the rom several times. I do the full system wipe before from recovery, flash the boot image, install rom with WCX recovery, re-flash the boot image from the SD card
same problem every time.

tudorvictor said:
Hello,
So far Holic's ROM seems to be the only one without in-call volume problems on my Vivid (Bell Canada) but there are two problems, one more annoying than the other
first, most annoying problem: after I install, the phone will upgrade to the latest apps like Hangouts. Everything works great, I can start hangouts and chat.
But after some time (5 to 10 minutes) of the phone just sitting there, or especially after a reboot, I will get the "google play services is not supported by your device" error. I have to remove update to google play store and resintall it, and then problem goes away temporarily and hangouts is usable again, and after the next reboot same problems reappear.
Does anyone have any fix for this?
second problem, less annoying:
On the phone dialer, there is a button at the bottom right which looks like a button for calling voicemail (has some funny symbols on it)
if I press this button I get error message "Android.process.acore has stopped unexpectedly". Does anyone else have this?
My phone is S-ON
I reinstalled the rom several times. I do the full system wipe before from recovery, flash the boot image, install rom with WCX recovery, re-flash the boot image from the SD card
same problem every time.
Click to expand...
Click to collapse
What Gapps are you installing? Have you tried different ones?
CM11 in call volume is pretty much gone since about the middle of January (if you read the thread, you'll see good feedback about it from about the 15th on). Only issue is sending/recieving MMS. Might want to give it another shot since this seem to be the only one getting worked on by the devs.

Yuskow said:
What Gapps are you installing? Have you tried different ones?
CM11 in call volume is pretty much gone since about the middle of January (if you read the thread, you'll see good feedback about it from about the 15th on). Only issue is sending/recieving MMS. Might want to give it another shot since this seem to be the only one getting worked on by the devs.
Click to expand...
Click to collapse
I'm not flashing any Gapps on this, the ROM already comes with them.
This is a ROM based on 4.0.3 ICS, not kitkat
I actually tried two versions of CM11, one was the latest unofficial nightly build from february 19, and the other was the albinoman release from january 15. both have the low volume problem.
I also tried the Borked ROM, based on 4.0.3, and it has the same low call volume problem, but no other issues like hangouts not working.
What GApps should I flash for a 4.0.3 based ROM?

You don't flash gapps on a stock based ROM ever
Sent from my Vivid 4G using XDA Premium 4 mobile app

[Q] How do I proceed

Hi,
I'm new to these things. Please help.
I have partial problems with my phone's speaker. I want to try can it be fixed via System Update.
Speaker problem is kinda mind-bending. Not sure when it occurs.
Speaker seems to work fine when calling someone near. When calling from over ~10 kilometers, speaker distorts the incoming sound. Works fine with loud speaker, which kind of takes the problem out of being problem of my service provider.
I'm quite possibly going to take my phone to the warranty service. That's why I want to have the "Device status: Official", not "Custom".
My friend rooted and installed a custom ROM, which I didn't like. I made him uninstall the ROM but the root stayed. (Late 2013)
Now comes the part I think I f***ed up.
Started watching videos about urooting, unbricking and such. Now what I have accomplished is that I've pressed "unroot" in SuperSU and uninstalled it.
Soon to notice that I should've used some program to clear the Device status.
Not sure what Flashing Android means and when its done, but there is counter which should be put to zero?
Those two things are done in programs which require rooting? So what do I do now?
Installing SuperSU gives me error binary not installed, and SuperSU cannot install it. Someone in fixed this with restarting device in Recovery mode with QuickBoot program which, again, needed the device to be rooted already.
I want to have my System Update done by the "right" way, from "About device" -> "Update". Now it gives me "Your device has been modified."
Please redirect and guide me!
I have S4 active GT-I9295, android version 4.2.2. Ask about baseband, kernel versions/other statuses if you need those informations!
Thank you SO much for your time and help beforehand! :good:
ps. 2 year warranty is till 28.9.15

thanks for everybody for answering!:good::good::good::good:

Make backup of your images, videos and data by copy to ext SD or use Helium from Play Store .
Install =flash 5.0.1 Samsung GT-I9295 firmware best match for your region using PC Odin 3.09 /3.10. The complete firmware *. TAR.MD5 is placed in Odin AP field, no need for other files in the other Odin file fields.
Factory reset after successful flash.
Will set all to stock with latest firmware.
Tools, tutorial and downloads here:
http://www.youmobile.org/blogs/entr...-to-your-Samsung-Device-Using-ODIN-3-Tutorial
More advice and how to
http://forum.xda-developers.com/showthread.php?p=56955843
ThumbsUp button under every post is free to use in case you're in the mood to show appreciation.

Motorola G6 no sound during calls after flash

Hello,
I have a motorola G6 that after bad root get stuck on bootloop.
I flash the phone with two roms but the phone after flash dont have sound during calls, the earpice dont work even in loudspeaker, but the phone rings when is receving calls.
anyone already have this problem?
tanks

This question is probably in the wrong section but anyway...I did. I never checked the phone prior to rooting so I'm not sure if a "bad root" was the cause or not. However, I experienced the exact same problem as you. I was originally on build OPS27.82-19-4 so I reflashed stock OPS27.82-19-4 as described here. But I still had the same problem. On a whim I randomly flashed build OPS27.82-19-4 following the same instructions. The phone has been working great ever since (I have it rooted, xposed. etc...). Not sure why there was a problem, or if reflashing the newer build "fixed" it or not...but as I said, all is good now. FWIW, when I check the sim status in settings>about phone, the network section is blank. It was blank when I had problems too.
Perhaps this will help you..
PS When I reflashed the firmware, the phone would boot into fastboot mode, then when I selected "Start" it would boot to the OS. If you run into that, here is how it was fixed. See posts 5, 6, 7, & 8.
Good luck!

I had a similar problem, I did the root, TWRP, I ended up giving up and flash again on the stock of the bike G6 Play (Brazil) available here in XDA, to my surprise, he made and received calls normally, the speaker for music and connections of other applications (Whatsapp, Messenger, Hangouts, etc.), but it did not work for the rom dialer.
I thought I had a problem, it was when a system update appeared, I installed it and it worked again.
I figured it was some rom bug I installed.

Tanks for the help.
I solved the problem flashing the phone with flashrom.bat instead of put the comand one by one.
Many tanks

Multiredes said:
Tanks for the help.
I solved the problem flashing the phone with flashrom.bat instead of put the comand one by one.
Many tanks
Click to expand...
Click to collapse
That's because a custom rom or GSI does not have all the necessary files. 99.9% of the time, flashing stock will fix a problem.