Related
I tried to root my G1 from this link..
http://forum.xda-developers.com/showthread.php?t=442480
Made it through the first few steps well, until i finally began to upgrade the image dreaimg or w,e.. It failed on me & now i cannot leave the screen. I remove the battery & turn it on. but when i do it stays in the same spot.. I tried everything & need some help.. ]:
Here is a pic of the screen.. : http://img683.imageshack.us/img683/4355/picture001bk.jpg
Did it start updating, then stop in the middle of it? Did the phone turn off due to running out of battery during the flash? Did you format your card to FAT32, download the proper RC for the original sale location of your phone?
Try pulling the battery at, then removing your SD card, do a long format to FAT32 (whether it is or not) copy the dreamimg.nbh onto the SD card, put the SD card back in the phone, put the battery back in, put it on a charger not turned on for 30 minutes, then take it off the charger...
Now that you have done all that, try booting into boot loader again by holding down the camera and power button until it goes into that screen again and does it's thing.
If this doesn't work, well, good luck since I have no idea from there.
Yes i've tried all of that.. Once i remove my battery it turns on, but as soon as i put it on again it turns on & the same screen appears.. There nothing i can do to go back to the Home screen.. D':
I most likely made a mistake but now i cannot fix this! ]:
SOme onee! please help me.. ]:
Everyone continues to ignore my thread..
have you tried to reset within there by pressing Home+menu+end? ppl are not ignoring.. jus they dont kno how to help.. as the guy already gave ideas that im pretty sure everyone would have said
Jose_95 said:
SOme onee! please help me.. ]:
Everyone continues to ignore my thread..
Click to expand...
Click to collapse
When does this screen appear? Instead of the G1 screen or after it? If after, hold down home+Power and get into recovery, try reflashing your rom.
ilostchild said:
have you tried to reset within there by pressing Home+menu+end? ppl are not ignoring.. jus they dont kno how to help.. as the guy already gave ideas that im pretty sure everyone would have said
Click to expand...
Click to collapse
I tried that combination just now & it wont work either.. ]: I've tried all combinations with buttons i know to try and reset the phone to get away from that uploader thing.. But nothing works..
BTaylor927 said:
When does this screen appear? Instead of the G1 screen or after it? If after, hold down home+Power and get into recovery, try reflashing your rom.
Click to expand...
Click to collapse
That screen is the only thing that ever appears on my phone.. ]:I cant take that screen away like i want too.. So it appears instead of the G1 screen..
If that is the only screen that ever shows up, you very well may be bricked, I hate to say it.
It really sounds like during your flashing of the .nbh file it was disrupted for one reason or another, either the battery died or it was a corrupted file, so the only file left on the phone is the boot loader. Thus, it is the only thing that will show...
Of course, I am not 100% positive without knowing exactly what you did, not being able to mess with the phone myself, and so forth.
Some people have been able to bring phones back from the dead by getting lucky and being able to get ADB to work... try plugging the phone into your computer using a data cable and see if you can get any sort of ADB to work, perhaps seeing if you can get the stock HTC update program to recognize the phone and hopefully flash it into working.
pjcforpres said:
If that is the only screen that ever shows up, you very well may be bricked, I hate to say it.
It really sounds like during your flashing of the .nbh file it was disrupted for one reason or another, either the battery died or it was a corrupted file, so the only file left on the phone is the boot loader. Thus, it is the only thing that will show...
Of course, I am not 100% positive without knowing exactly what you did, not being able to mess with the phone myself, and so forth.
Some people have been able to bring phones back from the dead by getting lucky and being able to get ADB to work... try plugging the phone into your computer using a data cable and see if you can get any sort of ADB to work, perhaps seeing if you can get the stock HTC update program to recognize the phone and hopefully flash it into working.
Click to expand...
Click to collapse
So then is there anyway to restart the phone? Like a secret way? & when i connect my phone to the computer when its shut off, it appears on the computer but not completely.. it says that one of the files are not recognized. Damn, this is really a pain.. ]:
So, you cannot boot into recovery, correct? And have you tried to connect to your pc and use ADB?
rjgonza said:
So, you cannot boot into recovery, correct? And have you tried to connect to your pc and use ADB?
Click to expand...
Click to collapse
Agreed.
You should read up tutorials on ADB and see if you can use ADB to access your phone. If you can, your phone can still be recovered.
If not - then yeah, brick.
akapoor said:
Agreed.
You should read up tutorials on ADB and see if you can use ADB to access your phone. If you can, your phone can still be recovered.
If not - then yeah, brick.
Click to expand...
Click to collapse
I cannot connect it to my computer at all.. Once turning on the phone the only thing that appears is the loader thing.. Whats ADB? how can it help me?
The Search button is your friend.
http://forum.xda-developers.com/showthread.php?t=502010
Hi,
yeah.. its over now. My SGS doesnt longer react to USB connectivity, except power charging <3
Finally I have to get a microSD, hm?
cheers
What about downloade-mode?
download mode is workin! But neither download-mode nor cwm with mounted usb drive let my PC recognize it as an SGS.
Tried several slots and computers with different operating systems.
And by the way: my smart phone isnt booting any longer, stucks at kernel splash due to some epic-fail-flashing-moves.
I would check anyway, if odin recognize the phone!
My PC also doesn't recognize my smartphone as an sgs, during this is in downloadmode .
It's not bricked if you're able to get download mode or recovery menu.
Do you have latest SGS drivers installed? Kies installed?
If not, download them or download Kies.
Then try to flash stock JVR firmware to you phone.
Hope those work.
No, Odin does not react.
Like I said: I tried different PCs and set-ups.
But now i think it could be important to mention, that before I have had my bricked phone, my plan was to fix the phone. Because it stucked in panorama mode and showed a lock screen, like it were shown if it were connected to the SGS dock.
I didnt see any chance to deactivate it. Not even the automatic display turn worked to get back to portrait mode.
My result was that my phone got damaged by rain (maybe it got a little wet at a rainy outdoor party). In fact: I dont know what happenend, but at this time i wasnt able to connect it as a mass storage and at this time it stucked in this wierd dock-mode.
Now my clever move: shut down => cwm => format everything => boot => wonder why it doesnt work => short remember of the USB problem => **** => problem solving Plan B
Yeah thats all.
http://forum.xda-developers.com/showthread.php?t=1236273
Suggestion:Maybe you can try this !!??
Pls take it as friendly advice
OR you should try to get a Jig and enter Download mode
I didnt know about the thread you just linked, thanks for the really friendly advice !
But seriously, this is nice to know and he can have my device if theres no hope, but i wont give it up this early.
Just reinstalled KIES but didnt change anything. Any clues ?
I had the same problem with my phone where basically Windows 7 refused to detect the phone (probably the drivers weren't being cleaned out properly when I reinstalled them). I think it maybe worth a shot if you got the time to try Ubuntu with Heimdall and just for kicks try it with a different USB cable if you haven't done so already.
dude try to uninstall the DRIVERS for the phone(usually found below KIES uninstall) and then install KIES again
Hope this helps
good luck
I gave it back to the store and they repaired it. Fortunately without any costs
Even my internal storage card hasnt been touched. My SGS is now stock 2.3.3 jvi
marf3 said:
Hi,
yeah.. its over now. My SGS doesnt longer react to USB connectivity, except power charging <3
Finally I have to get a microSD, hm?
cheers
Click to expand...
Click to collapse
Dude, could you tell me what's the problem with Odin when your phone is in download mode??
Do you have your drivers with you? (Get em from softpedia!)
and which firmware were you on??
and try out my thread, same problem but it was solved !
http://forum.xda-developers.com/showthread.php?t=1249641
PM me if you want any clarifications!
hi,
i can't connect with usb. when i plug in it just loading my battery. i can't even click on usb-tethering on my phone. The problem came when i put the first rom on my phone and stuppit that i was not making i backup. i treid diffent roms but nothing work. also wipe cach on cwm. even when i put the phone in download mode, he doesn't connect. even kies and odin don't move. i thougt i where my drivers on my pc but that is not the problem. can someone make an update.zip for me with the stock firmeware and then i hope dat wil work. i'm from belgium and my phone is s5830xwks2
Thnkx
driftboy said:
hi,
i can't connect with usb. when i plug in it just loading my battery. i can't even click on usb-tethering on my phone. The problem came when i put the first rom on my phone and stuppit that i was not making i backup. i treid diffent roms but nothing work. also wipe cach on cwm. even when i put the phone in download mode, he doesn't connect. even kies and odin don't move. i thougt i where my drivers on my pc but that is not the problem. can someone make an update.zip for me with the stock firmeware and then i hope dat wil work. i'm from belgium and my phone is s5830xwks2
Thnkx
Click to expand...
Click to collapse
Use a different computer/usb port
EmoBoiix3 said:
Use a different computer/usb port
Click to expand...
Click to collapse
diffente usb port won't work
is thier nobody how can't help me?
well happened to me and i used another pc....
use a card reader for data transfer...
else try reinstalling usb driver....or a factory reset to phone(backup ur data by titanium pro
CWM -> Mounts -> Mount SD Card
if that doesn't work then reinstall your drivers, try installing Kies, it has every driver that is needed.
i agree with others it my be drivers!
Re-install drivers (re-install kies)
Try again
Try other computer same happened to me!
in my gf laptop my ace is not recognized or is but only sometimes, and in mine is always!
Try also different cable!
Good Luck
try to type in dialer *#1234#
you must have 3 lines
pda, phone and csc if csc is missing so kies wont recognize your phone and you have to put any csc files from any rom to your system folder and it will work =)
maybe there is a problem with ur ace hardware or pc drivers because i was like that too,but i use a little tilt and now it works for me
Ahmed hamouda said:
try to type in dialer *#1234#
you must have 3 lines
pda, phone and csc if csc is missing so kies wont recognize your phone and you have to put any csc files from any rom to your system folder and it will work =)
Click to expand...
Click to collapse
i treid an other rom how has scs in it and it doesn't work, neighter an other pc and cable.... :-(
Download Samsung driver at Samsung.com . Install it. Restart your PC and ur phone . Try it.
Press thanks if u think I help you
Sent from my GT-S5830 using Tapatalk
driftboy said:
hi,
i can't connect with usb. when i plug in it just loading my battery. i can't even click on usb-tethering on my phone. The problem came when i put the first rom on my phone and stuppit that i was not making i backup. i treid diffent roms but nothing work. also wipe cach on cwm. even when i put the phone in download mode, he doesn't connect. even kies and odin don't move. i thougt i where my drivers on my pc but that is not the problem. can someone make an update.zip for me with the stock firmeware and then i hope dat wil work. i'm from belgium and my phone is s5830xwks2
Thnkx
Click to expand...
Click to collapse
Try to install new Samsung driver and unchecked USB debugging.
Press thanks if you think I help you
Sent from my GT-S5830 using Tapatalk
reventongt said:
Try to install new Samsung driver and unchecked USB debugging.
Press thanks if you think I help you
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
nope, won't work.....
is there a way that somebody make me an update with stock fimeware and rom, so that my phone back stock is? maybe thats solves my problem....
I have try an other pc and the same problem.....will not connect, just loading battery.
reventongt said:
Download Samsung driver at Samsung.com . Install it. Restart your PC and ur phone . Try it.
Press thanks if u think I help you
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
also didn't work...
I think reverting to the original firmware is what you need and want so here it is.
http://forum.xda-developers.com/showthread.php?t=1437426
Visit my site too!! www.stickycover.com
Stickycover said:
I think reverting to the original firmware is what you need and want so here it is.
http://forum.xda-developers.com/showthread.php?t=1437426
Visit my site too!! www.stickycover.com
Click to expand...
Click to collapse
strange.....when i install the rom, my phone doesn't load....just the screen android comes up and stays that way. i waited ten minutes and nothing happend.so i installed back a newer clockworksmod, wipe cach ect........ and put back cm9_galaxyics-ace-beta3 on.
there someting very wrong with my phone i think. by the way my phone is still in root mode, must i unrooted?
I just wanna share my experience. Once i had this type of problem but when i removed my external hard disk it worked again. If u have connected any this type hardware like printer or something disconnect that.
Sent from my GT-S5830 using XDA
Yeah I had the same prob once, all the juice was going to other devices and wasn't letting the phone be detected, so +1 for that idea.
thats the problem..when i plug my phone in usb nothing happend but charging. even ubs tethering can i not select on the phone and when i put the phone in download mod he doen't react.
have you tried to fiddle with the USB debugging? I had a similar problem once. I kept on plugging it in and changing the USB debugging in the settings until it worked. Annoying but helped.
Sent from my GT-S5830 using XDA App
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
humblepie88 said:
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
Click to expand...
Click to collapse
Try using SmartFlashTool, download the LG stock ROM (can be found here in XDA forum, i'll help you find the link), flash the .bin and .fls files.
humblepie88 said:
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
...
"Hold the vol+ button and power key before plugging in but the smarttool did not find the com port..."
Click to expand...
Click to collapse
Turn off the phone. Hold Vol-DOWN while plugging it in. Start Smartflash and see the com-ports magically appear.
Follow trymhansen's instructions. He helped me before with my softbricked phone.
I hope you get your O2X back to life! Keep us posted
Best of luck to you!
PS. I also believe you should pull out the battery after turning off the phone in Trym's instructions. Trym correct me if I'm wrong please.
Hi All,
Thanks for your kind replies. I did follow your instruction. Take out the battery (I removed the ext SDcard as well), press and hold -vol and plug in the phone via USB. Afterwhich start up smartflash tool.. still nothing happens and no com ports are found.. The version of smartflashtool that I used is Dec 2010. Do I need to get the latest one and also the LG united drivers installed?
I also tried starting smartflash tool before the sequence.. still the same. BTW.. my OS is Win 7. Is it supported?
Really at my end's wit. Hope I can bring my phone back to life soon and I'm not really bricking it. I heard Samsung phones are not that easy to brick and can get to the recovery mode pretty easily. is it true?
Please help me.. thanks
Hi bros,
Attached are my screenshots from the device manager and smartflash tool... both seems not able to find the phone and allocate a com port. I've tried installing the latest LG mobile driver 3.6 but no help as well
Have you followed instructions as described here http://forum.xda-developers.com/showthread.php?t=1008070 ?
Also, try to attach your phone directly to computer, using usb ports from computer mainboard. I have experienced problems when attaching it via extension usb cord or attaching it to computer case ports. (I hope that you can understand what I have mean to say with usb )
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
humblepie88 said:
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
Click to expand...
Click to collapse
launch smartflashtool first, extract the .fls and .bin files, hold down volume at the same time plug in the usb port to your comp. you must see a s/w updating logo in your phone's screen and smartflash should detect your phone. then click start!
Sent using a phone.
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
humblepie88 said:
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
Click to expand...
Click to collapse
does the laptop have lg drivers installed?
Sent using a phone.
inflance hotota
mrgian said:
does the laptop have lg drivers installed?
Sent using a phone.
Click to expand...
Click to collapse
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
humblepie88 said:
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
Click to expand...
Click to collapse
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
you got a point there.
Sent using a phone.
humblepie88 said:
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
Click to expand...
Click to collapse
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
LarsPT said:
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
Click to expand...
Click to collapse
I've tried the recovery via 2 diff laptops and plugging in directly to one of the side USB ports but to no avail as well.. I think I've plugged in the phone correctly but there's no reaction at all/
mrgian said:
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
Click to expand...
Click to collapse
How to enter CWM? I can't even power up the phone and no reaction at all when plugged into USB via smartflash.. the screen remains black. It's liked the whole phone is burned or something... but strange thing is that it can detect APX and asked to install drivers... but after successfully installing the Nvidia boot recovery driver.. the com ports does not get discovered.. What is wrong?
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
I plugged in the phone with battery but there was no charge logo or whatever.. the screen remains blank.. I'll try to leave it charging and see what happens. But I've remembered there was still about 80% power when this disaster happened and I've taken out the battery since.. so the charge should have remain? Btw.. where can I get this ext3 back.zip and how to use it? thanks
Im on ics rom right now and im stuck on it. My computer wont recognize my phone, i tried installing drivers and many other things but it just wont work... Can someone tell me what to do??? (i tried connecting to other computers but it doesnt work) If not can someone suggest custom rom that doesnt drain 1% of battery in 2 minutes.
xXcRazycRackeRXx said:
Im on ics rom right now and im stuck on it. My computer wont recognize my phone, i tried installing drivers and many other things but it just wont work... Can someone tell me what to do??? (i tried connecting to other computers but it doesnt work) If not can someone suggest custom rom that doesnt drain 1% of battery in 2 minutes.
Click to expand...
Click to collapse
Did you try a other computer? Sometimes the computer fails to identify you device, happend to me 1 time.
Or try Blazr rom, fast stable and very long battery life!
Just put the zip file on your sdcard and copy it to your phone (since your computer doesnt let you connect via usb)
Then go into recovery mode en update via zip file.
See this link for the rom: http://forum.xda-developers.com/showthread.php?t=1628639
Everything you need is posted there.
Greetings
CybertekDj said:
Did you try a other computer? Sometimes the computer fails to identify you device, happend to me 1 time.
Or try Blazr rom, fast stable and very long battery life!
Just put the zip file on your sdcard and copy it to your phone (since your computer doesnt let you connect via usb)
Then go into recovery mode en update via zip file.
See this link for the rom: http://forum.xda-developers.com/showthread.php?t=1628639
Everything you need is posted there.
Greetings
Click to expand...
Click to collapse
I tried it on friends computer.
And i need i9000 roms.
xXcRazycRackeRXx said:
I tried it on friends computer.
And i need i9000 roms.
Click to expand...
Click to collapse
Odin or Heimdall is the only way, but try flashing another ics Rom to see if it fixes the phone not being recognised
slaphead20 said:
Odin or Heimdall is the only way, but try flashing another ics Rom to see if it fixes the phone not being recognised
Click to expand...
Click to collapse
I tried almost every ics rom but it didnt work. I guess i will have to buy new usb cable and check if there is something wrong with the phone.
I had the same problem, I uninstalled the usb drivers and installed them again and it seemed too work fine
Sent from my potato using xda app-developers app
xXcRazycRackeRXx said:
I tried almost every ics rom but it didnt work. I guess i will have to buy new usb cable and check if there is something wrong with the phone.
Click to expand...
Click to collapse
yep, the cable is likely the common cause and problem but not all cables are compatible, best to get original or bring phone and test data mode before buying as charging mode works on all
on the other hand, just examine your usb slot too..a slight misalignment can also cause this problem
xsenman said:
yep, the cable is likely the common cause and problem but not all cables are compatible, best to get original or bring phone and test data mode before buying as charging mode works on all
on the other hand, just examine your usb slot too..a slight misalignment can also cause this problem
Click to expand...
Click to collapse
Will Sgs 2 cable work?
xXcRazycRackeRXx said:
Will Sgs 2 cable work?
Click to expand...
Click to collapse
give it a try, it should