[Request] android 2.3.4 stock rom rooted - Nexus One Q&A, Help & Troubleshooting

can someone please provide me an android 2.3.4 stock rom rooted for the nexus one of course?

ran_inc said:
can someone please provide me an android 2.3.4 stock rom rooted for the nexus one of course?
Click to expand...
Click to collapse
When there is one available it will be posted in the android development forum.

but if you are impatient... try Blandroid 2.3.4... it's AOSP-based, rooted and 99% stock... http://blandroid.org/downloads

Geo411m usually posts a nice near stock custom ROM based on each release. If you watch the development forum for this username I bet you'll see one pop-up soon after the N1 specific code is officially available. I've used them before with good results and there is a theme post with nice themes made specifically for Geo's ROMs.

I'm using a rooted version of FRG83G (2.2.2) but I can't do the ota update because of my rooted version.
Is there a way to upgrade my OS ? (my boot loader is unlocked)

madjpm said:
I'm using a rooted version of FRG83G (2.2.2) but I can't do the ota update because of my rooted version.
Is there a way to upgrade my OS ? (my boot loader is unlocked)
Click to expand...
Click to collapse
Backup ask your data with Titanium.
Passimg back to stock, and update to 2.3.4.
fastboot flash recovery.
Use recovery to install ChainsDD's su.
Restore your Titanium backup...

Blandroid is very good. It contains even my local language, so it's even better than stock from Google. Can be installed as stock replacement.

Flash FR91, Go into HBOOT and flash the stock recovery, start up, force checkin and let it update ( you only have 1 chance at this if you screw up you'd have to do the whole thing again ).
Download SU.zip and flash from recovery.
There you go you have 2.3.4 stock with root.

illuminarias said:
Flash FR91, Go into HBOOT and flash the stock recovery, start up, force checkin and let it update ( you only have 1 chance at this if you screw up you'd have to do the whole thing again ).
Download SU.zip and flash from recovery.
There you go you have 2.3.4 stock with root.
Click to expand...
Click to collapse
Install stock recovery from HBOOT?

danger-rat said:
Install stock recovery from HBOOT?
Click to expand...
Click to collapse
Yeah? I'm not sure if that's the way you say it but hboot flash recovery recovery.img ?
Or is it called bootloader...

That would be fastboot, not hboot.
Why would you want a stock recovery, and how do you plan on flashing the su.zip with a stock recovery?

My bad, I keep on getting confused with G1.
If you do not have stock recovery, it will not flash the OTA update from 2.2 to 2.3.3 then 2.3.4. After the sequence is done you can go back into fastboot and flash a custom recovery. After that you can flash SU.zip

You can flash an update from any recovery, just turn the signature verification off...

Do-it-yourself way....
1. Get 2.3.4 system dump from here, and Android Kitchen here.(If your OS is Windows, you will need to install modified Cygwin to use it)
2. Cook the system dump files with Android Kitchen.
3. ?
4. Now you have rooted 'stock' 2.3.4 package that can be flashed on custom recovery!
Click to expand...
Click to collapse

danger-rat said:
You can flash an update from any recovery, just turn the signature verification off...
Click to expand...
Click to collapse
But this is an ota update. Mine did not flash. It went back into recovery after downloading the ota update but it will not flash.

You can flash OTAs through any recovery, just turn the signature verification off. I've done it many times, including the update 2.3.4...

danger-rat said:
You can flash OTAs through any recovery, just turn the signature verification off. I've done it many times, including the update 2.3.4...
Click to expand...
Click to collapse
Then I must have done something wrong then. All mine did was boot back into recovery and stay there without flashing anything. I still made it work though.

Related

Backup/Restore Stock Recovery

I have an ATT nexus and was just able to apply the manual update and gain root without unlocking the bootloader
If I install a custom recovery I know that I likely won't get any additional OTA updates. Is it possible to back up my current recovery before installing a custom?
I was thinking of just renaming install-recovery.sh to install-recovery.sh.bak and recovery-from-boot.p to recovery-from-boot.p.bak. Then just remove the custom recovery image and remove the .bak from the end of the files.
Will that re-install the stock recovery?
You can't root with stock
Full stock is a sticky in dev forum
It includes the recovery
Flash the custom one then if you want stock see the sticky
leonnib4 said:
You can't root with stock
Full stock is a sticky in dev forum
It includes the recovery
Flash the custom one then if you want stock see the sticky
Click to expand...
Click to collapse
I'm already rooted with stock on FRF85B with an ATT phone.
i just wasn't sure if the stock recovery in the sticky would be the same as 85B for ATT so I wanted to backup whatever I'm currently using.
Ok then
Stock recovery is always the same, don't worry
leonnib4 said:
Ok then
Stock recovery is always the same, don't worry
Click to expand...
Click to collapse
Excellent!

Where to download latest stock rom, with root?

Where is the lastest stock rom, but with super user permissions. Tired of constant freezing of CM7 and landscape / portrait lockouts. Hoping stock rom (rooted) will solve the issue of screen not changing direction when turned.
Where to download latest rooted rom?
Big_O said:
Where is the lastest stock rom, but with super user permissions. Tired of constant freezing of CM7 and landscape / portrait lockouts. Hoping stock rom (rooted) will solve the issue of screen not changing direction when turned.
Where to download latest rooted rom?
Click to expand...
Click to collapse
Over in development.
Sent from my Nexus One using XDA Premium App
Try Blandroid. it's 99% stock. www.blandroid.org/downloads
Why not just flash a stock rom, update it to 2.3.4 then root it?
illuminarias said:
Why not just flash a stock rom, update it to 2.3.4 then root it?
Click to expand...
Click to collapse
...and how do you do that (root 2.3.4)?
What's the best way to root it? It's been a while and remember going through some hoops to get mine working.
danger-rat said:
...and how do you do that (root 2.3.4)?
Click to expand...
Click to collapse
I'm assuming you'll be on stock recovery, you simply go back to bootloader and flash clockwork or Armon and flash the SU zip file again.
How I did it :
Flash FR91
Flash stock recovery
Let it boot
Force check in
Download 2.3.3 update and let it reboot
Force check in one more time
Download 2.3.4 update and let it reboot
Go back to bootloader and flash Armon/Clockwork
Flash SU.zip
Done I have root on 2.3.4 STOCK
Where can the SU.zip be found? Running ClockworkMod Recovery.
Search ChainsDD in the dev section

[Q] Update won't install on Stock Rooted with TWRP

HTC Pushed an update to my HTC One Dev Ed tonight..
1.29.1540.16
When it tries to flash the update it just goes into TWRP recovery. No other actions.
I then drilled down to the directory that it downloaded to /data/media/downloads and tried to flash with TWRP.. no dice.
Here is the update.. but honestly I don't know what it does.
any Idea on what is preventing the flash?
deligator said:
HTC Pushed an update to my HTC One Dev Ed tonight..
1.29.1540.16
When it tries to flash the update it just goes into TWRP recovery. No other actions.
I then drilled down to the directory that it downloaded to /data/media/downloads and tried to flash with TWRP.. no dice.
Here is the update.. but honestly I don't know what it does.
any Idea on what is preventing the flash?
Click to expand...
Click to collapse
It only work on stock recovery, not on any custom recovery like TWRP or CMW.
lucky76 said:
It only work on stock recovery, not on any custom recovery like TWRP or CMW.
Click to expand...
Click to collapse
any workaround? ... other than going back to stock recovery.
deligator said:
any workaround? ... other than going back to stock recovery.
Click to expand...
Click to collapse
You must go back to stock recovery in order for the update to successfully flash on your device.
You don't need the update from HTC, just go and flash the latest revolution 10.2 rom, it is running 4.2.2 and it has some nice performance tweaks. And it isn't modified so it's running sense 5.
Sent from my HTC One using xda premium
deligator said:
any workaround? ... other than going back to stock recovery.
Click to expand...
Click to collapse
jlevy73 said:
You must go back to stock recovery in order for the update to successfully flash on your device.
Click to expand...
Click to collapse
How to do you go back to a stock recovery? Been down that road and it still didn't update.
akk60 said:
You don't need the update from HTC, just go and flash the latest revolution 10.2 rom, it is running 4.2.2 and it has some nice performance tweaks. And it isn't modified so it's running sense 5.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
For some of us, going to a different ROM is not a viable choice, and frankly a solution to load a different ROM does not answer the original question.
Hi I have the same problem here.
When I try to install stock 4.2.2, the phone reboot & automatically enter TWRP & thus stock update was unable to run.
kennfebruary said:
Hi I have the same problem here.
When I try to install stock 4.2.2, the phone reboot & automatically enter TWRP & thus stock update was unable to run.
Click to expand...
Click to collapse
None of the HTC direct updates will work while TWRP is installed.
you will have to
Fastboot flash (stock recovery .img)
then the updated from HTC works with no problems. pst if you can't find the img

[Q] Problems with downloaded system update

I just got a notification that there was a system update for my phone. I'm running a rooted, but otherwise stock phone. When it downloads and reboots it goes to the recovery menu instead of updating. Is there something that I need to do to get this to install?
o350125 said:
I just got a notification that there was a system update for my phone. I'm running a rooted, but otherwise stock phone. When it downloads and reboots it goes to the recovery menu instead of updating. Is there something that I need to do to get this to install?
Click to expand...
Click to collapse
Do you have the stock recovery or is it custom. You have to be on stock ROM and stock Recovery in order to OTA. You may lose root, but being rooted will not affect the OTA installing.
Ah, that may be the problem. I have TWRP installed, so does that mean that I'll have to flash a rom that's been updated?
Thanks!
raptoro07 said:
Do you have the stock recovery or is it custom. You have to be on stock ROM and stock Recovery in order to OTA. You may lose root, but being rooted will not affect the OTA installing.
Click to expand...
Click to collapse
o350125 said:
Ah, that may be the problem. I have TWRP installed, so does that mean that I'll have to flash a rom that's been updated?
Thanks!
Click to expand...
Click to collapse
You have to flash stock recovery at least. Some people were having luck just flashing the stock recovery and some were having to relock the bootloader as well. I tried flashing the stock recovery and running the update but it failed. I don't really want to relock my bootloader and lose all my data when I unlock it again, so I'm holding off for now.
Sent from my HTCONE using xda premium
tristandespain said:
You have to flash stock recovery at least. Some people were having luck just flashing the stock recovery and some were having to relock the bootloader as well. I tried flashing the stock recovery and running the update but it failed. I don't really want to relock my bootloader and lose all my data when I unlock it again, so I'm holding off for now.
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
Flash the stock boot image also. I would bet you have the insecure boot image flashed

update software atrix hd

i recieved several times a message saying that i have to install a security update (at&t), after some time i decided to install it but when i try to i get a status 7, another thing what do i need to install a custom rom on my arix hd, it has android 4.1 from at&t, unlocked bootloader, cwm, and carrier unlocked (i dont want to loose this), in my touchpad i just have to download the rom + gapss and install them from a custom recover, so i dont know if this is the same for the atrix hd, thanks in advance.
You need to be running stock recovery and stock ROM to install the update.
The update includes security patches and some modem updates. This update may be necessary for taking the OTA KK update.
audit13 said:
You need to be running stock recovery and stock ROM to install the update.
The update includes security patches and some modem updates. This update may be necessary for taking the OTA KK update.
Click to expand...
Click to collapse
ok thanks for answering, i have stock rom so, but unlocked bootloader can i install it then just by installing the stock recovery?
You may need to be unrooted in addition to having stock recovery.
If you removed too many of the att apps, that may cause the update to fail as well.
audit13 said:
You may need to be unrooted in addition to having stock recovery.
If you removed too many of the att apps, that may cause the update to fail as well.
Click to expand...
Click to collapse
where can i find stock recovery?, because when i turn the phone on it takes about 40 secs to reboot into recovery to update, so i cant do anything with it now :S
maur1c10 said:
where can i find stock recovery?, because when i turn the phone on it takes about 40 secs to reboot into recovery to update, so i cant do anything with it now :S
Click to expand...
Click to collapse
Did you phone take the update or is it automatically booting into recovery?
The best way to get the update is to flash back to stock ATT 4.1.1, take the OTA update, re-install CWM, and carry on using a custom ROM. This is exactly what I did with a Bell Canada Atrix HD.
You can try re-installing stock recovery in fastboot.
audit13 said:
Did you phone take the update or is it automatically booting into recovery?
The best way to get the update is to flash back to stock ATT 4.1.1, take the OTA update, re-install CWM, and carry on using a custom ROM. This is exactly what I did with a Bell Canada Atrix HD.
You can try re-installing stock recovery in fastboot.
Click to expand...
Click to collapse
Yeah. The quickest, sure-fire way to get in a position to take the OTA update is to flash back to stock (stock files available here). You can use RSD or MythTools, whatever works for you. Doing this will also put you back on stock recovery.
I had to do this, too, before I could take the OTA. But in my case I had modified/removed too many AT&T stock apps...
thanks to both of you, yes the phone rebooted itself like about 40 secs from turning on i was able to fix this part by formatting cache from cwm, now im gonna try to flash stock recovery
quasihellfish said:
Yeah. The quickest, sure-fire way to get in a position to take the OTA update is to flash back to stock (stock files available here). You can use RSD or MythTools, whatever works for you. Doing this will also put you back on stock recovery.
I had to do this, too, before I could take the OTA. But in my case I had modified/removed too many AT&T stock apps...
Click to expand...
Click to collapse
so i flashed the stock recovery from the stock rom, but when i go into recovery the android is down with a red exclamation sign and i cant get into the recovery menu :S, did this happen to you by any chance?
maur1c10 said:
so i flashed the stock recovery from the stock rom, but when i go into recovery the android is down with a red exclamation sign and i cant get into the recovery menu :S, did this happen to you by any chance?
Click to expand...
Click to collapse
When the dead Android dude is on the screen, tap the bottom right hand side of screen. Hopefully, a menu will appear.
audit13 said:
When the dead Android dude is on the screen, tap the bottom right hand side of screen. Hopefully, a menu will appear.
Click to expand...
Click to collapse
well i flashed the stock firmware, and the phone works fine but still the same with recovery, nothing happens if i touch on the screen or if i press volume or power button, tried to install the update anyway but it fails, hope i can somehow install KK when it comes
maur1c10 said:
well i flashed the stock firmware, and the phone works fine but still the same with recovery, nothing happens if i touch on the screen or if i press volume or power button, tried to install the update anyway but it fails, hope i can somehow install KK when it comes
Click to expand...
Click to collapse
Which stock ROM did you install? There are 2 versions of 4.1.1.
audit13 said:
Which stock ROM did you install? There are 2 versions of 4.1.1.
Click to expand...
Click to collapse
Blur_Version.98.4.20.MB886.ATT.en.US is the one that my phone already had
I think that is the ROM before the update.
I see another ROM named Blur_Version.98.5.38.MB886.ATT.en.US too.
audit13 said:
I think that is the ROM before the update.
I see another ROM named Blur_Version.98.5.38.MB886.ATT.en.US too.
Click to expand...
Click to collapse
flashed it and works fine except recovery the same issue but its updated so i can go to cwm now, thanks man
maur1c10 said:
flashed it and works fine except recovery the same issue but its updated so i can go to cwm now, thanks man
Click to expand...
Click to collapse
Did you flash 98.4.20 or 98.5.38?
audit13 said:
Did you flash 98.4.20 or 98.5.38?
Click to expand...
Click to collapse
the first time i flashed 98.4.20 the second time 98.5.38 and i have the same problem with recovery in both cases
maur1c10 said:
the first time i flashed 98.4.20 the second time 98.5.38 and i have the same problem with recovery in both cases
Click to expand...
Click to collapse
Strange. Did you flash both ROMs using RSD Lite or Myth? I had to use RSD Lite without Myth to flash 98.4.20.
audit13 said:
Strange. Did you flash both ROMs using RSD Lite or Myth? I had to use RSD Lite without Myth to flash 98.4.20.
Click to expand...
Click to collapse
i used myth (easier to use), could that make any difference?
maur1c10 said:
i used myth (easier to use), could that make any difference?
Click to expand...
Click to collapse
I got a Bell Canada Atrix HD from a co-worker. When I used Myth to flash from stock Bell to stock ATT, it would not work properly. When I used RSD with 98.4.20 without going through Myth, the ATT ROM flashed without any errors. I was able to take the OTA update, flash CWM, and revert to a custom ROM.

Categories

Resources