Related
My Captivate is only about a week old. After getting it, I immediately rooted it and installed stock Froyo, but wasn't satisfied with the battery life or performance. So I installed Darky's 7.5 ROM (nowipe version using the 'wipe data + cache' option in CWM) along with the glitterball kernel and JL3 modem. Performance and stability were excellent, but battery life was abysmal, even with no apps running and the CPU capped between 100MHz and 800MHz using SetCPU (which is plenty fast on this ROM). I'm talking about 10-15% drain per hour while on standby, packet data, wifi, bluetooth, GPS, and sync all off.
I attempted to flash back to stock to try other ROM's, but Odin one-click simply bricked my phone to the point where I needed a hardware jig. After much work, I was able to flash Cognition using the regular Odin and then use CWM to restore my phone back to the Darky's ROM state with all my data and apps intact. Battery life is still terrible though. I've tried several methods to revert my phone to a stock kernel, including Odin one-click, Odin with 3-button fix, and regular Odin loading various stock ROM PDA and PIT files.
The furthest I was able to get was a phone with a working recovery menu that gave me 'Kernel Panic' right after the AT&T logo. Otherwise, the phone would be completely bricked (no button combinations) and I'd have to reset it using the jig. However, flashing a custom ROM that *doesn't* require reverting to stock first (Odin-flashable), or restoring a backup from CWM works just fine every time, no matter how badly I brick the phone. It's just stock ROM's and kernels that I can't get to boot or install properly.
I'm running out of ideas, because this battery drain is unacceptable and my ROM choices are severely limited. I did try flashing some ROM's over Darky's (JPY) without the revert-to-stock step, but I always get weird problems like missing phone, message and contacts apps.
I would really appreciate it if someone could help me out.
You need to get your odin issues worked out. They are abnormal. One I would try to delete the prism then re download. Two please list steps your are following to flag with odin, hopefully it is an ready oversight someone xan point out to you.
Sent from my SGH-I897 using XDA App
mcord11758 said:
You need to get your odin issues worked out. They are abnormal. One I would try to delete the prism then re download. Two please list steps your are following to flag with odin, hopefully it is an ready oversight someone xan point out to you.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I have re-downloaded both Odin and the files to flash multiple times, confirmed by the '(1)' tacked onto the filenames in my download folders. My procedure:
1. Extract Odin and PIT file (if flashing with a PIT).
2. Run Odin as Administrator, select PDA tar/md5 file (and PIT file if applicable). Untick 'Auto Reboot'.
3. Put phone into download mode using volume button combo (or hardware jig if Odin already bricked my phone).
4. Plug phone in. Phone recognized immediately by Windows and Odin.
5. Click start in Odin. Procedure always completes successfully.
6. Battery pull and unplug phone. Put battery back in and turn phone on. If flashing a stock ROM, phone either gets kernel panic, or is bricked and all button combos are disabled.
The files I used for stock flashing were found in the Odin one-click + master clear thread and the Odin one-click button combo fix thread (which uses a PIT and PDA file). I used Odin 3 v1.0 when flashing PDA files (had no problems flashing cognition ROM or non-stock kernels).
For the one-click versions, I followed the above procedure (minus the selection of PDA/PIT files). One-click always bricks, regular Odin will either brick or cause kernel panic when flashing a stock ROM or kernel, depending on PDA/PIT files and the previous state of the phone.
When you run odin one click, were do things appear to go wrong
Sent from my SGH-I897 using XDA App
mcord11758 said:
When you run odin one click, were do things appear to go wrong
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
There's no sign of anything going wrong until the phone auto-reboots (since you can't disable that in one-click). Upon rebooting, the phone just loops the AT&T logo, requiring a battery pull. Button combinations do not work and the battery charge icon (when the phone is off) freezes when the phone is plugged in.
GGXtreme said:
There's no sign of anything going wrong until the phone auto-reboots (since you can't disable that in one-click). Upon rebooting, the phone just loops the AT&T logo, requiring a battery pull. Button combinations do not work and the battery charge icon (when the phone is off) freezes when the phone is plugged in.
Click to expand...
Click to collapse
are you at&t our rogers? What us the name if the odin file you are using/
Sent from my SGH-I897 using XDA App
mcord11758 said:
are you at&t our rogers? What us the name if the odin file you are using/
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I'm on AT&T. Odin files I've tried include:
Odin3 v1.3.exe (bundled with Odin3.ini and s1_odin_20100803.pit)
Odin3_v1.0.exe (bundled with PIT.pit and used with PDA.tar)
Odin.exe (bundled with PIT.pit and PDA.tar for Cognition)
I897UCJF6-final-OCD-REV0.exe
All of the Odin executables (with the exception of the one-click) work fine flashing Cognition and I9000_reoriented_v2.3.0.tar (xcalib kernel), but not with the included PDA.tar files. When I say 'work fine', I mean flash the phone into a workable, non-bricked state, since Odin never throws me any errors or failures.
*bump*
Is this hopeless? I've asked about this elsewhere, and no one seems to have any suggestions. My phone has been up and running fine on multiple different custom ROM's and kernels, but it still bugs me that I can't flash back to stock if needed. Also, any suggestions on improving battery life are very welcome.
After searching around for a bit, it seems that Captivates from batches 1008 to 1010 cannot be flashed back to JF6 using any version of Odin. The closest that can be achieved is JH3 using Odin 1.7. This is pretty disappointing.
Oh well, I guess I have no luck with technology. Unless anyone feels like throwing battery life suggestions at me, this thread can be closed/deleted I guess.
The battery probably just needs calibrating.
There are.multiple threads in the forum on this and I would be happy to point.you to them, bit.I am on the phone app and its a little more.difficult to do so.
Sent from my GT-I9000 using XDA App
Search development thread for I897UCJH7 - OTA by designgears. Close enough to JF6.
Sent from a phone somewhere in the universe
http://forum.xda-developers.com/showthread.php?t=731989 <-- this is what I use to go back to stock before every re-flash. Never had an issue.
Build 1008 phone - hobbling along with random reboots etc.. and no buttons working.
I wouldn't suggest using anything else to flash back to stock. Then flash your new ROM as usual. You do NOT need to do a "stock" 2.2 froyo ROM first before installing any custom ROM.
The simple way to flash correctly to a new ROM
Use Odin 1 Click I897UCJF6 back to Stock.
Root your Phone (Or if you kept the Update.zip from CWM you can fore go all of this )
Download ROM Manager - update Busybox
Put the ROM you wish to use on your SDCard
Go into CWM and flash as normal following the dev/cooks instructions.
cappysw10 said:
Search development thread for I897UCJH7 - OTA by designgears. Close enough to JF6.
Sent from a phone somewhere in the universe
Click to expand...
Click to collapse
Thanks. I eventually figured out the JH2 to JH7 trick. It seems I can't properly flash any ROM below JH3 using any version of Odin.
avgjoegeek said:
http://forum.xda-developers.com/showthread.php?t=731989 <-- this is what I use to go back to stock before every re-flash. Never had an issue.
Build 1008 phone - hobbling along with random reboots etc.. and no buttons working.
I wouldn't suggest using anything else to flash back to stock. Then flash your new ROM as usual. You do NOT need to do a "stock" 2.2 froyo ROM first before installing any custom ROM.
The simple way to flash correctly to a new ROM
Use Odin 1 Click I897UCJF6 back to Stock.
Root your Phone (Or if you kept the Update.zip from CWM you can fore go all of this )
Download ROM Manager - update Busybox
Put the ROM you wish to use on your SDCard
Go into CWM and flash as normal following the dev/cooks instructions.
Click to expand...
Click to collapse
That is what I've always been trying. Attempting to flash anything below JH3 with any version of Odin (one-click or regular with PDA/PIT files) ALWAYS bricks my phone and requires a jig, 100% of the time, using any computer. Flashing a newer/custom ROM works fine.
GGXtreme said:
Thanks. I eventually figured out the JH2 to JH7 trick. It seems I can't properly flash any ROM below JH3 using any version of Odin.
That is what I've always been trying. Attempting to flash anything below JH3 with any version of Odin (one-click or regular with PDA/PIT files) ALWAYS bricks my phone and requires a jig, 100% of the time, using any computer. Flashing a newer/custom ROM works fine.
Click to expand...
Click to collapse
intriguing the somewhat random button combo issues on some newer builds of phone
newter55 said:
intriguing the somewhat random button combo issues on some newer builds of phone
Click to expand...
Click to collapse
I can't remember if it did, but I think the actual issue is that my phone came with JH7 (not JF6) and is actually incapable of running older firmware due to some difference in the hardware/build. That's why flashing stock JH7 seems to work fine.
Can I flash that ROM on built 1006? Thanks
Yes you can
What about ODIN vs CWM on 1008 and below which pll are talikng about? I don't want to brick that phone
Scyzor said:
What about ODIN vs CWM on 1008 and below which pll are talikng about? I don't want to brick that phone
Click to expand...
Click to collapse
you can use odin one-click or any cwm. it is very hard to brick a cappy.
^ He's wrong.
Using Odin One-Click on a batch 1008 phone could disable your 3 button combo. There's a workaround however.
Odin One-Click:
http://forum.xda-developers.com/showthread.php?t=731989
If 3-Button is broken after One-Click, install this:
http://forum.xda-developers.com/showthread.php?t=812434
There's some more info on this stuff if you search. I quickly tried to find it, but had no luck in the minute I spent looking...
I personally have a 1008 and I have never had any problems with the 3 button recovery so it just depends on the phone. But I don't know of any problems with build 1006
Sent from my SAMSUNG-SGH-I897 using XDA App
Do I need to use ODIN to flash Cognition or I can go with CWM when flashing from a stock?
Odin will take you to stock. If you are already stock, there is no reason to odin...
Save your /efs folder, backup apps with TiBu, create a nandroid of your stock Rom via cwm (in case you ever want to go back), then flash away in cwm recovery.
i897 running Andromeda 2.0
I have a 1006 phone. Never had a problem with any of the perception or cognition roms. In fact, I'm on 3.04 right now. Never had a problem with the odin one-click stock on this phone either.
If the phone is on JH7 do I need go back to "clear" stock 2.1?
Have you flashed a custom rom on this phone? If no, then you are definitely running stock.
i897 running Andromeda 1.2
Also I did small research to be sure: http://forum.xda-developers.com/showpost.php?p=10116277&postcount=48
Hello,
I own a I-897 Captivate model, and I had a custom 2.3.4 gignerbread rom recently..
Latley I tried to move to cognition becuase the other rom did problems for me..
So I followed the guide, and when I first flashed the kernel I wasn't using any pit file..
So it's just stuck on odin with nothing happening, so I closed odin and rebooted my phone.
Then the phone showed me a logo with phone and computer with X between them.
So I flashed again using the pit then I got to the recovery, where I tried to install the cognition 5.2 without succes, it finished the install, but when I rebooted it just kept switching between the boot screen of AT&T and Galaxy S GT I9000..
So I tried to use my Nandroid backup, but it just won't work, I tried to install it manually and still it isn't working..
So I tried to instal my previous rom and succeeded, but now when I reboot it it just loading the Talon logo, finishes it and stuck on the end of the loading without any action...
So, I can use the download mode and odin.
What should I do?
Thank you very much.
What build number is your phone
Sent from my I897 using XDA Premium App
Okay, ive installed 2.1 stock and its works.
Now can someone give me step by step guide to install cyanogen rom or cogntion
or whats the best rom is.. Thanks.
Gibieyal said:
Okay, ive installed 2.1 stock and its works.
Now can someone give me step by step guide to install cyanogen rom or cogntion
or whats the best rom is.. Thanks.
Click to expand...
Click to collapse
Please I beg you to stop what you're doing and just Read, Read like your life depends on it and keep reading till you can flash with utter confidence least you permanently brick your Cappy.
Sent From My SGS Captivate 2.3.5 Biffmod
I have read tons of time,
I tried to install Cyanogenmod, but it seems when I get to the recovery it doesn't work..
I flashed the recovery through CWM, but its very limited and blue not bright green or yellow as always.
I only got 4 options:
Reboot
Re-Install packges
Wipe user data
Wipe cahce
How do I get my recovery work properly?
That's not CMW that's the regular 3e recovery. You'll need to flash a kernel with CMW built in or one with an alternate recovery (I usually use an Onix kernel)
Sent From My SGS Captivate 2.3.5
I've flashed a full gingerbread stock rom, with boot loaders and it works fine,
but now I can't get to the download mode, so I cant flash the rooted kernel..
I'm stucked unrooted, How can I root it?
It's Gingerbread 2.3.3 UCKF1 Build stock rom.
Pull out your battery, Sim, and SD card. Plug your usb cable into a usb port on the back of your computer then plug it into your phone. Hold volume up and down then reinsert your battery, should boot into download mode.
Sent From My SGS Captivate 2.3.5
Hi,
i have a samsung galaxy S,and keep bootlooping
i get samsung galaxy s,then turn of then again...
i tried to wipe,install different roms,etc....
any ideas
If nothing else will do the trick, a last resort can be flashing stock firmware downloaded from sammobile using Odin tuen your phone off use vol down power and home and put phone into download mode put the pit PDA code and modem files in the right place..Google this. This will flash your phone and take you right back to out of the box. This should work. Man I bricked my phone and done this and it sorted me out. Hope I'm of some help. Let me know how it goes. Cheers
Sent from my GT-I9000 using xda premium
AntAust1513 said:
a last resort can be flashing stock firmware downloaded from sammobile using Odin
Click to expand...
Click to collapse
While flashing stock is probably the best option, if you are impatient and want a custom rom you can flash one of the Darky resurrection editions in Odin instead. This does the same as flashing stock, but you skip having to root and reflash into a custom rom (assuming you want Darky...).
Flash the latest 2.3.6 XXJVU value pack update...!
JohnnyReb67 said:
While flashing stock is probably the best option, if you are impatient and want a custom rom you can flash one of the Darky resurrection editions in Odin instead. This does the same as flashing stock, but you skip having to root and reflash into a custom rom (assuming you want Darky...).
Click to expand...
Click to collapse
I tried this today but found myself in booploops god knows why so I had to go through the piss take of flashing stock, rooting, then installing the rom I wanted. Probably my own fault not reading how to do it properly lol anyhow.. Annoying.
Sent from my GT-I9000 using XDA App
I'm apparently not allowed to post in the OneCosmic thread where it probably make more sense.
I'm getting the black screen on bootup. The touch-buttons (menu and back) still light up when I press them, so it's not dead. I can still go into recovery mode, but before I try another rom, I wanted to ask on here. Here's the process I went through:
Renamed the zip file to update.zip, because it wasn't showing up as an option to install for some reason
Wiped the SD card and returned to factory settings in recovery mode
Booted into recovery mode
Installed from the newly-renamed update.zip, all seemed to install fine
Pressed reboot device
I do want to give this rom a try, so I'll wait a while before trying to put Cyanogen on instead (the Galaxy S is my backup phone, and hasn't been used for close to a year).
I received the Captivate from a friend of mine who complained that AT&T kept bricking his device through Kies and OTA updates. He never was able to update his device to Froyo. I unlocked the device to work on my carrier and then I tried Kies on 3 different computers (running XP and 7), and my device was stuck on the AT&T screen. Using odin oneclick, I got my firmware back to UCJF6 (stock Eclair). Since then, I've tried nearly every one click available (that hasn't been deleted off the internet), I've tried updating bootloaders and installing a separate kernel before flashing a rom in CWM:
(http://forum.xda-developers.com/showthread.php?t=1350266)
However, the device would not boot into recovery mode after following these steps:
(http://forum.xda-developers.com/showthread.php?=1953930).
Anyone have any suggestions? Never have I had such a frustrating phone, and that has some merit after owning a Motorola XT720.
Have u tried this one With Bootloaders http://forum.xda-developers.com/showthread.php?p=18370912.
Then use the regular Odin to flash the .tar file version of the KK4 Corn Kernel v7.0A that will give u CWM Recovery and u could proceed from there to a Dev's Rom.
Sent from my SAMSUNG-SGH-I777 using xda premium
Flashed Stock
I tried the Heimdall One-Click - Link to thread - by AdamOutler to try and get to Froyo -- Stuck at AT&T logo.
Flashed Stock
I tried the I897UCKF1 Android 2.3.3 Gingerbread with BL and then flashed the Kernel after the ROM using Odin v1.85 -- Stuck at AT&T logo.
Flashed Stock
I tried the I897UCKI2 Android 2.3.5 Gingerbread with Bootloaders [With CWM Injected Kernel from Boog] -- Stuck at AT&T logo
Am I doing something wrong here, or am I just unfortunate?
Try the one i posted. It is a Full Wipe Stock flash and should get ya goin.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Try the one i posted. It is a Full Wipe Stock flash and should get ya goin.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
The link you posted contained a good 7 different ROMS. I already had the Designgears Odin one click (Eclair stock with BL) downloaded and that's what I used before flashing anything else on that page. That ROM works and gets me back to stock 2.1 however that's the only ROM that has worked for me.
The link i posted was to my One Clicks in post #3 of that thread.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
The link i posted was to my One Clicks in post #3 of that thread.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I flashed using Odin with BL, then i flashed KK4 Corn Kernel v7.0A. Now I try restarting my device and booting it into recovery mode, and it doesn't work..? Recovery mode has never worked on this device unless I run an ADB command in CMD or using an app with root access.
I've been holding down all 3 buttons for 3-5 seconds and releasing, tried using the up button too the same way.
If I leave the device running, it stays stuck on the AT&T screen.
newbkilla said:
I flashed using Odin with BL, then i flashed KK4 Corn Kernel v7.0A. Now I try restarting my device and booting it into recovery mode, and it doesn't work..? Recovery mode has never worked on this device unless I run an ADB command in CMD or using an app with root access.
I've been holding down all 3 buttons for 3-5 seconds and releasing, tried using the up button too the same way.
If I leave the device running, it stays stuck on the AT&T screen.
Click to expand...
Click to collapse
Try reflashing corn kernel. And with gb bootloaders, it will always be the 3 buttons combo to get in recovery.
Sent from my SGH-I897 using xda app-developers app
BWolf56 said:
Try reflashing corn kernel. And with gb bootloaders, it will always be the 3 buttons combo to get in recovery.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
I swear, the phone will not allow me to boot into recovery mode let alone get passed the AT&T screen.
smokestack76 said:
Works every time for me if i power off. Hold down volume up and down and power. Wait for the att screen to go off and as soon as it comes back on the second time let go of the power button and continue holding both volume button down until you see recovery booting. It works the same with a usb cable plugged in for download mode.
Click to expand...
Click to collapse
I even tried this and I was unsuccessful.
Okay, I must be missing something here, because none of the oneclicks work except for designgears stock 2.1 ROM (I897UCJF6).
I'm going to start over and i hope someone here can guide me in the right direction:
I'm running stock 2.1 ROM, might as well be straight out of the box. I want to upgrade to 2.3 with GB BL so that I can flash whatever ROM i wish in the future. Kies Mini doesn't work, so that's out of the picture.
The One Clicks that 4-2ndtwin post a link to (both IlluminatedOne's and his own) do not work, meaning that I get stuck at the AT&T screen and it just pauses there. I have no problem getting into Download Mode or Recovery Mode while using the WORKING 2.1 I897UCJF6 ROM, however if I run ANY of the oneclicks other than I897UCJF6, i cannot boot into Recovery Mode.
I'm running Windows 7 64 bit, I have the 64bit drivers installed. I have tried Windows XP as well.
Sorry for the double post, but what in the world do I do?
Ok. Go here...http://forum.xda-developers.com/showthread.php?p=30840818
This is the full firmware for i897ucKF1 GB 2.3.3 with Bootloaders included. This is not a One Click. U will use the regular Odin and load the files in their cooresponding tabs of Odin. PDA file in PDA slot of Odin. CSC file in CSC slot. MODEM file in MODEM slot. Pit file in pit, etc. Connect in Download mode. Start. After this u can flash Corn Kernel and proceed.
Some of the Captivates don't like One Clicks. So maybe that is the deal with ur phone.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
Ok. Go here...http://forum.xda-developers.com/showthread.php?p=30840818
This is the full firmware for i897ucKF1 GB 2.3.3 with Bootloaders included. This is not a One Click. U will use the regular Odin and load the files in their cooresponding tabs of Odin. PDA file in PDA slot of Odin. CSC file in CSC slot. MODEM file in MODEM slot. Pit file in pit, etc. Connect in Download mode. Start. After this u can flash Corn Kernel and proceed.
Some of the Captivates don't like One Clicks. So maybe that is the deal with ur phone.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Well I did finally get it downloaded off of your dropbox and I used the Odin that came with the zip file and flashed all files given (CSC, Modem, PDA and PIT) and it's still stuck on the AT&T screen.. haha. Any other ideas?
Maybe this
I upgraded from stock Froyo 2.1 rooted to GB 2.3.5 with bootloaders using this package:
http://forum.xda-developers.com/showthread.php?t=1285616.
If you look here at post #3:
http://forum.xda-developers.com/showthread.php?p=18370912
it says this:
**Once u have the i897 Gingerbread Bootloaders, it is not necessary to flash bootloaders again. The i897 Gingerbread Bootloaders are backwards compatible, therefore you can flash Eclair, Froyo, Gingerbread, CyanogenMod, and MIUI Firmware/Roms without the bootloaders included, per the proper install instructions.**
Maybe your boot conflict is because you're trying to load the GB bootloaders again and there are 2 boot files or a glitched boot file. I'm no expert but I tend to go back to the simplest reason when I'm troubleshooting something that should work. Though it seems like a complete wipe and re-partition would delete bootloaders, maybe it doesn't from the sound of the above.
Try the package without bootloaders from here:
http://forum.xda-developers.com/showthread.php?t=1285616
It loads the rom and the kernal with CWM all at once with a full wipe and repartition.
I always remove the Sim and external sd card before flashing and disable my anti-virus when I'm in Winblows.
I hope SOMETHING works for you.
akone2 said:
I upgraded from stock Froyo 2.1 rooted to GB 2.3.5 with bootloaders using this package:
http://forum.xda-developers.com/showthread.php?t=1285616.
If you look here at post #3:
http://forum.xda-developers.com/showthread.php?p=18370912
it says this:
**Once u have the i897 Gingerbread Bootloaders, it is not necessary to flash bootloaders again. The i897 Gingerbread Bootloaders are backwards compatible, therefore you can flash Eclair, Froyo, Gingerbread, CyanogenMod, and MIUI Firmware/Roms without the bootloaders included, per the proper install instructions.**
Maybe your boot conflict is because you're trying to load the GB bootloaders again and there are 2 boot files or a glitched boot file. I'm no expert but I tend to go back to the simplest reason when I'm troubleshooting something that should work. Though it seems like a complete wipe and re-partition would delete bootloaders, maybe it doesn't from the sound of the above.
Try the package without bootloaders from here:
http://forum.xda-developers.com/showthread.php?t=1285616
It loads the rom and the kernal with CWM all at once with a full wipe and repartition.
I always remove the Sim and external sd card before flashing and disable my anti-virus when I'm in Winblows.
I hope SOMETHING works for you.
Click to expand...
Click to collapse
Thanks for the tips, however I'm flashing the stock 2.1 ROM with the BL, so even if I had the GB BL's flashed, wouldn't they be overwritten when I flash a the stock ROM? Nonetheless, I tried flashing without the BL, and it still froze at the AT&T screen..
What happens to ur phone doesnt make sense...idk. Honestly dont get it...
The only thing u can run is stock eclair... and no other plain stock will boot and run ?
Wish i could be of more help.
Sent from my SGH-I777 using xda premium
Have you tried getting into recovery when its stuck at the att screen and clear the cache or whatever other clearing you can do? Maybe CWM will be loaded. If it re-boots while holding the three button recovery method, that may be a good sign. Then at the re-boot, let go of the power button at the next att screen.
Does Odin give it a pass?
Are the roms your flashing rooted before you flash? In other words is Eclair rooted and then all others?
Pull the battery at the att screen?
Or go back into download mode and re-flash if that doesn't work.
I'm just guessing and the last 2 suggestions could be dangerous.......................I don't know.
Edit: Have you tried this?: http://forum.xda-developers.com/showthread.php?t=884364. It has a root file and a CWM file for Eclair. I tried the links to those and they did connect.
akone2 said:
Have you tried getting into recovery when its stuck at the att screen and clear the cache or whatever other clearing you can do? Maybe CWM will be loaded. If it re-boots while holding the three button recovery method, that may be a good sign. Then at the re-boot, let go of the power button at the next att screen.
Does Odin give it a pass?
Are the roms your flashing rooted before you flash? In other words is Eclair rooted and then all others?
Pull the battery at the att screen?
Or go back into download mode and re-flash if that doesn't work.
I'm just guessing and the last 2 suggestions could be dangerous.......................I don't know.
Click to expand...
Click to collapse
I've found that when applying the stock Eclair ROM, it never says "pass", it says reset--however it works and reboots into 2.1update1. My phone isn't rooted, it has been though. I've realized that some oneclicks say "Re-partition, Full Wipe". My experience is that my phone never enters recovery mode so my phone never wipes anything like the oneclick intends to do. I have not been able to enter recovery mode once I have flashed 2.2 or even 2.3 with or without bootloaders. Do you guys think that's the problem? And if it is, how would I enter recovery if the button combo doesn't work...?
akone2 said:
Have you tried getting into recovery when its stuck at the att screen and clear the cache or whatever other clearing you can do? Maybe CWM will be loaded. If it re-boots while holding the three button recovery method, that may be a good sign. Then at the re-boot, let go of the power button at the next att screen.
Does Odin give it a pass?
Are the roms your flashing rooted before you flash? In other words is Eclair rooted and then all others?
Pull the battery at the att screen?
Or go back into download mode and re-flash if that doesn't work.
I'm just guessing and the last 2 suggestions could be dangerous.......................I don't know.
Click to expand...
Click to collapse
Pulling the battery is not a great idea, it's only when it's "needed".
OP, I'm must say I'm quite confused myself, none of it makes sense.. Although, did you try flashing a 2.2 custom ROM?
I'm thinking you have some either bad or corrupted files/hardware keeping you from flashing but if you're able to flash a custom ROM, then there might be hope.
Also, a JTAG/box might work. They now flash stock GB and could *maybe* overwrite w/e in your phone that is messing with all your flashing.
BTW, it sounds like you are doing the wrong thing to get into recovery. Hold both volume keys, and then press the power button as you would to turn the phone on normally/until the screen turns on. Then, keep holding the volume buttons until you see recovery.
And which at&t screen are you stuck on? The very first one or the boot animation?
Sent from my Nexus 7 using Tapatalk HD
korockinout13 said:
BTW, it sounds like you are doing the wrong thing to get into recovery. Hold both volume keys, and then press the power button as you would to turn the phone on normally/until the screen turns on. Then, keep holding the volume buttons until you see recovery.
And which at&t screen are you stuck on? The very first one or the boot animation?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
That's the strange thing, it will NOT boot into recovery when I flash say KK4. I hold the volume buttons for over 30 seconds, and it just stays at the AT&T screen. It gets stuck before the boot animation, I never see it when I try to flash anything 2.1+. I have booted into recovery mode before, so I know that I am doing the button combo properly.