Related
ok jist is
tried kernal update, fone stuck on boot screen galaxy s i9000M
SAMSUNG
no matter what i do, even load stock samsung firmware, i get as far as this screen
odlin can still see phone though.
any help would be great
fliptechnologies said:
ok jist is
tried kernal update, fone stuck on boot screen galaxy s i9000M
SAMSUNG
no matter what i do, even load stock samsung firmware, i get as far as this screen
odlin can still see phone though.
any help would be great
Click to expand...
Click to collapse
3 combos buttons work ?
Vol down+home+power on/off ?
Vol Up + home+ power on/off ?
if yes, try to flash the correct rom for I9000M
If you can get into download mode, and Odin sees your phone, then it is very unlikely that you bricked it.
Just flash Darkys ressurection or stock Samsung ROM from Odin.
ok installed darkys, now all phone does is flash galaxy i9000 screen
managed to get past that screen and back to recovery mode, and still d/l mode, trying EZBASE now as i was getting as far as colour S then bursts of vibrations
UPDATE:
stuck on boot loop now, still can access recovery and d/k mode, after trying to install EZBase. is their any other siggestions.
pref, instructions and files for re-loading stock firmware for australia on it, if memory calls had 2.2 of eclair
still no luck people, any further advice please
I just had the same issue with my i9000m. Download the fireware I9000UGJL2.exe from http://forum.xda-developers.com/showthread.php?t=846913
It fixed my issue instantly. Then go to that kitchen rom website and create your own ROM. My phone has never been faster. GPS works very good, way better than before. Even cell service is 100000000000 times better....
ok, good news is i have it working stock rom and rooted, got most aps back on, now my issue is, i cant install clockwork recovery from rom manager, i tried it via odlin and got the screen of phone and pc and the exclamation mark. can some1 please help out as to how i can get clockwork recovery mod installed.
fone details are
galaxy S i9000I now just without the i
firmware 2.1-update1
baseband i9000xxjm4
kernal 2.6.29 [email protected] #2
build ECLAIR.xwjm8
thanks
fliptechnologies said:
i tried it via odlin and got the screen of phone and pc and the exclamation mark.
thanks
Click to expand...
Click to collapse
What did you try flashing with Odin?
electrotune1200 said:
What did you try flashing with Odin?
Click to expand...
Click to collapse
ried flashing
CF-Root-XW_XEE_JVB-v3.1-CWM3RFS
Go to D/L mode and reflash the kernal.
So you tried flashing Chainfires JVB kernal on a 2.1 rom?
I think that's the problem....
electrotune1200 said:
So you tried flashing Chainfires JVB kernal on a 2.1 rom?
I think that's the problem....
Click to expand...
Click to collapse
ok thanks, what should i flash then, or how can i update to 2.2 or 2.3 without loosing files and apps ?
Man you should not try to flash things when you don't understand them.
For this moment you tried to flash a kernel that is for a gingerbread rom (JVB, android 2.3.3) on your Eclair 2.1. Don't you think you should read a bit more before flashing everything on your phone?
Go to the official rom thread and follow the guides to flash a gingerbread(2.3.3) or Froyo(2.2) rom
Ok ill put this as plain and as simple as i can
1. I am new to flashing
2. I asked how to do it, as after all this is a q&a section
3. I feel my questions hvae not been answered correctley
so i shall explain again and this time links may help
1. I want a kernal that will give me recovery options
2. I do not want to loose anything on the phone
3. I want to upgrade to 2.3
so i would like links please or someone who can take the time to write a quicvk step list telling me what to do.
You really need to go to main thread and all info is there, it would take ages to talk you out of this...its all out there, seek and you shall find, its tough love
Sent from my GT-I9000 using XDA App
happened to me ea few nights ago but EZBASE rom got me out of it ,then you can flash a rom from there try it
I agree! Ezbase is a cinge!
Sent from my GT-I9000 using XDA App
/me shakes head, i sware i asked for links, i guess ill go get in trouble again and repost this in a different section.
Just use the search for ezbase 3, would you like your bottom wiped! We try to help...and what thanks??!
Sent from gt i9000 insanity 8.5/fugumod
G'evening guys,
got a little bit of a problem here. My (european) Samsung Galaxy S is screwed. As soon as I boot it up, it loads a custom flashed TWLauncher which immediatly crashes. I can click the message away, but then after a few vibrations it will crash again. I can put it in Kies Mode, but I can't get Kies on Win to start some kind of recovery.
If I try to get into the bootloader, I'm only gonna see the default Samsung bootloader. I tried to push an update.zip on the phone, but it would not install due to some kind of signature errors.
Story first:
1. Rooted it with Superoneclick v1.4
2. Installed Recovery Manager. Not sure if some kind of recovery has been installed, at least none permanent.
3. Updated TWLauncher with SGS Tools in Flash
4. Did a factory wipe
I already tried loading a custom firmware via Update.zip and searched for an official update.zip, but didn't found one.
Also tried to push an older TWLauncher via adb, but this failed as I couldn't use su.
So, does anybody have a clue on how to solve this? Or will the only way to fix it be a send-in to Samsung?
LOL!!!
bricked just because of TWLauncher......
I think that is not brick.....
Flash stock rom via Odin.
Sent from Miui powered SGS
or custom ROM more better and satisfying
azzledazzle said:
Flash stock rom via Odin.
Sent from Miui powered SGS
Click to expand...
Click to collapse
sry for my english
thx for your answer i have tried a few times to flash my sgs with odin but it didnt work . i have started my sgs into the downloding mode and then i start odin to flash and then it does nothing
did you use a guide for flashing through odin? is your phone drivers installed on your computer? what kind of error?
Alright buddy, I agree sounds like you need to reflash a new rom.
Check out this link. By no means am I ordering you to flash darky's rom (even though it is bloody brilliant) It's a good guide for using odin.
If you follow it down to part 2 of the guide then you will have a basically stock Gingerbread with a few tweaks to make it a better experience.
Be sure to read it carefully as some of it isn't necessarily for you.
http://www.darkyrom.com/community/i...g-rc6-need-to-flash-dark_core_2-2-first.2382/
All credits go to darky, ficeto and ceriko obviously for the rom & guide.
Good luck
It's only a BRICK if the device is completely unrecoverable. This isn't even a soft-brick... the launcher just crashed.
Flash a new rom with ODIN;
or Flash a Kernel with CWM recovery via ODIN, and then boot into recovery.
Odin will work; just make sure you've got the drivers installed.
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Thanks for your help my sgs is working again the thread can be closed
You made it sound as if your phone was bricked! lol
I'd recommend you to install the Darky ROM 9.5.
I myself am a totally new Android and Galaxy S user. The first thing I did after unboxing my phone was to flash Darky's 9.5 on it. Its brilliant.
Here's the guide.
EDIT: Turns out I'm not allowed to post links. Well use google!
bigred85 said:
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Click to expand...
Click to collapse
Glad your sgs is back up and running buddy
Like what everyone els is saying, a reflash is the way to go. Id recomend flashing with EZbase. they offer the best stocklike roms.
bigred85 said:
Thanks for your help my sgs is working again the thread can be closed
Click to expand...
Click to collapse
Read the god damn thread people. Problem solved. Let this thread die.
I have been through a mess of attempts to root my phone and put it into 2e recovery so I could install custom mods, and ended up with nothing but an old version because I had to flash it on to be able to use it.
I'll try to explain the process.. first I had 2.2 firmware with JPC, was rooted already with superuser and then I tried to flash it into 2e recovery but when it finished the phone booted up, got in the main screen where you swipe the screen to unlock but got stuck there after a couple seconds, started vibrating randomly and shut down.
After that happened I flashed an original i9000 tar on it and it came back to life, unrooted and in JP6.
The first time I tried to flash it into 2e I forgot to run odin as an admin, so I thought that was my mistake so I went ahead and tried it again with a JP6 version and ran odin as admin, but the same exact thing happened... gets stuck in the same place so I flashed the original again.
I'm on a EU Galaxy S I9000 JP6 Froyo.
Anyone have an idea what I'm doing wrong?
SmokeyFish said:
I have been through a mess of attempts to root my phone and put it into 2e recovery so I could install custom mods, and ended up with nothing but an old version because I had to flash it on to be able to use it.
I'll try to explain the process.. first I had 2.2 firmware with JPC, was rooted already with superuser and then I tried to flash it into 2e recovery but when it finished the phone booted up, got in the main screen where you swipe the screen to unlock but got stuck there after a couple seconds, started vibrating randomly and shut down.
After that happened I flashed an original i9000 tar on it and it came back to life, unrooted and in JP6.
The first time I tried to flash it into 2e I forgot to run odin as an admin, so I thought that was my mistake so I went ahead and tried it again with a JP6 version and ran odin as admin, but the same exact thing happened... gets stuck in the same place so I flashed the original again.
I'm on a EU Galaxy S I9000 JP6 Froyo.
Anyone have an idea what I'm doing wrong?
Click to expand...
Click to collapse
do you want to stay on 2.2.1 or want to switch to GB...
if you can still get into dowloadmode (vol down / home / power)
froyo XXJPU : http://dl.dropbox.com/u/19506141/Stock - stock modems/I9000XXJPU (2.2.1).exe
GB XWJVH : http://dl.dropbox.com/u/19506141/Stock - stock modems/GT_I9000_XWJVH_XXJVO_NEEJV3_Sbl.exe
flas with odin : http://dl.dropbox.com/u/19506141/flash en drivers/Odin_+_pit.exe
PIT512 file is included, both firmwares come with safe bootloaders.
flash files with repatition checked.
and if you need them samsung drivers for PC :
http://dl.dropbox.com/u/19506141/flash en drivers/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
for rooting your phone you can use
froyo : http://dl.dropbox.com/u/19506141/speedmod-kernel-k13e-500hz.tar
GB JVH :http://dl.dropbox.com/u/19506141/Gingerbread-GT-I9000-XWJVH-stock-kernel+hacks.tar
flash in PDA using odin.Do NOT check repartition....
Thanks for the reply..
I don't want to make any mistakes, as im quite new to this phone and hacking/updating/putting new **** on it, so can you be a little more clear on the steps to take? I'm obviously going to upgrade to GB...
I can get into download mode fine, do I flash the 512 PIT file and the PDA_XWJVH_Sbl.tar.md5 file together? also just to make absolutely sure because I heard the partition thing can brick my phone, should it be checked for this particular flash?
SmokeyFish said:
Thanks for the reply..
I don't want to make any mistakes, as im quite new to this phone and hacking/updating/putting new **** on it, so can you be a little more clear on the steps to take? I'm obviously going to upgrade to GB...
I can get into download mode fine, do I flash the 512 PIT file and the PDA_XWJVH_Sbl.tar.md5 file together? also just to make absolutely sure because I heard the partition thing can brick my phone, should it be checked for this particular flash?
Click to expand...
Click to collapse
You should only use the repartition option when flashing a 3 file firmware. You can get them from samfirmware.com. The JVB firmware has all 3 files so I would download it.
Once downloaded open Odin and stick the files in the required fields. Insert your .pit file and select repart.
Once you have booted in to JVB you can then flash JVH using Odin in the PDA field with NO repartition.
Once booted into JVH I would use CF Root kernal to get root access
Go to insanity thread and check out the link to Ezbase rom, its a cinge! Noob too!
Sent from my GT-I9000 using XDA App
slaphead20 said:
Go to insanity thread and check out the link to Ezbase rom, its a cinge! Noob too!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yes i second that,,got me ouy of trouble a few times
My Galaxy Ace is stuck in a reboot loop after trying to flash 2.3.6 onto it, when it had 2.3.5 on it previously.
I've used ODIN and no matter what firmware I try to flash onto it, it just goes into a reboot loop.
Any idea how to fix it?
Did you try to do a wipe?
vkanamekuran said:
Did you try to do a wipe?
Click to expand...
Click to collapse
A wipe worked! Thanks!
how to do a wipe please tell
mor1228 said:
how to do a wipe please tell
Click to expand...
Click to collapse
press down home button and then power on phone ...--> you will enter into recovery mode .
select wipe with help of volume keys and there you go out of bootloop
My Galaxy Ace is also in some sorta reboot loop.
Everything was working fine with it (phone is rooted and CWM installed) until I did a phone reset because I was giving the phone to my gf. After doing this the phone reboots, the blue samsung logo plays (without sound) and then repeats ad-infinitum. I can get into recovery mode and download mode ok and I've tried wipe and even restored a CWM backup (it says it was successful) but the phone just keeps rebooting. I can see the phone in odin but I've never tried to flash anything onto it and quite frankly I'm unsure whether it would just make things worse (if it needs to go back to Samsung for repair). Any help would be appreciated...
If you have cwm ..why dont you download some custom rom like cm7and flash it ..that would bring your phone back to life ...then you can downgrade to stock rom if you want ...and btw in cwm try cache partition , clear data /factory reset and clear dalvik cache ..see if it boots after you do this ..
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
when i always flash by odin or by cwm i always do wipe , wipe cache and wipe dalvik, this helps me everytime
I managed to flash a firmware from samfirmware and it fixed the reboot.
Now my issue is when I connect to Kies, it says there's an updated firmware for the phone but it fails every attempt to install it. I went back to samfirmware and found this firmware: S5830ZSKPD ## but when I download and extract it there's only 1 x MD5 file and 1 x DLL file?! The other firmware had the 4 or 5 files needed to include in Odin... any ideas guys?
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
rogers4759 said:
I think its a "one package file " ..I forgot the correct name but there is some option like that in odin ..dont worry it contains all the required files ..and if you are scared to do it then go to you tube ..there are many tutorials showing it then...
Click to expand...
Click to collapse
Yep, that's exactly what it was, thanks again.
Unfortunately with this firmware, Kies doesn't recognise it and provides no info.
I flashed back to the older firmware... I'll just have to keep experimenting I guess.
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
dianpadi said:
for flashing with odin --> http://forum.xda-developers.com/showthread.php?t=1225493
many people says, don't upgrade the firmware with KIES.
Click to expand...
Click to collapse
Well I could flash it with Odin if I had the firmware but I don't.
It appears it's not available on SamFirmware.com
Do you know where I can download the following firmware?
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
Thanks
Lol I cant understand those firmwares ..can you tell me which version of android you want like 2.3.4/2.3.5/2.3.6 ...then ill be able to help you wanr
Sent from my SGA rocking CM7.2 by vo-1 + all-in-one script
Thanks anyway but I managed to find the firmware online and flashed it using Odin.
Now Kies says I'm using the latest which is a good start : )
Now I just need to find a way to root my SGS2 GT-I9100T
U can try a custom ROM from the Developer's forums here.
I also once stucked in the Reboot Loop..............
But then I installed a custom or if you want features from a official Rom, you can install Stock Based custom ROm from the Developer forums of Galaxy Ace. Really good Rom have been made by the developers
In the chance that someone else is looking for this latest OEM firmware update:
PDA:KPD / PHONE:KPD / CSC:KPC (THL)
It can be downloaded from: http://translate.googleusercontent....flgljh&usg=ALkJrhiMpHV83dugh4RGwhKpyjIrYIgn2Q
It is in "one part file" format and can be flashed using Odin.
whatever may be the problem ......just rem to keep a backup of ur previously used rom and just flash it with cwm...
Progress?
Sent from my GT-S5830 using xda premium
Read all the previous no way out loop boot
Hi every body
i have installed cwm, custum firmware, every thing goes ok
tryed to use simlock remover, no message, turned off the Galaxy Ace but after rebooting, a continuous loop boot, no acces to recovery, flashing on wath ever firmware version with odin success but on rebooting the loop is back, help please.
PS : while flasing with odin : "big partition size!!"
I received the Captivate from a friend of mine who complained that AT&T kept bricking his device through Kies and OTA updates. He never was able to update his device to Froyo. I unlocked the device to work on my carrier and then I tried Kies on 3 different computers (running XP and 7), and my device was stuck on the AT&T screen. Using odin oneclick, I got my firmware back to UCJF6 (stock Eclair). Since then, I've tried nearly every one click available (that hasn't been deleted off the internet), I've tried updating bootloaders and installing a separate kernel before flashing a rom in CWM:
(http://forum.xda-developers.com/showthread.php?t=1350266)
However, the device would not boot into recovery mode after following these steps:
(http://forum.xda-developers.com/showthread.php?=1953930).
Anyone have any suggestions? Never have I had such a frustrating phone, and that has some merit after owning a Motorola XT720.
Have u tried this one With Bootloaders http://forum.xda-developers.com/showthread.php?p=18370912.
Then use the regular Odin to flash the .tar file version of the KK4 Corn Kernel v7.0A that will give u CWM Recovery and u could proceed from there to a Dev's Rom.
Sent from my SAMSUNG-SGH-I777 using xda premium
Flashed Stock
I tried the Heimdall One-Click - Link to thread - by AdamOutler to try and get to Froyo -- Stuck at AT&T logo.
Flashed Stock
I tried the I897UCKF1 Android 2.3.3 Gingerbread with BL and then flashed the Kernel after the ROM using Odin v1.85 -- Stuck at AT&T logo.
Flashed Stock
I tried the I897UCKI2 Android 2.3.5 Gingerbread with Bootloaders [With CWM Injected Kernel from Boog] -- Stuck at AT&T logo
Am I doing something wrong here, or am I just unfortunate?
Try the one i posted. It is a Full Wipe Stock flash and should get ya goin.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Try the one i posted. It is a Full Wipe Stock flash and should get ya goin.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
The link you posted contained a good 7 different ROMS. I already had the Designgears Odin one click (Eclair stock with BL) downloaded and that's what I used before flashing anything else on that page. That ROM works and gets me back to stock 2.1 however that's the only ROM that has worked for me.
The link i posted was to my One Clicks in post #3 of that thread.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
The link i posted was to my One Clicks in post #3 of that thread.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I flashed using Odin with BL, then i flashed KK4 Corn Kernel v7.0A. Now I try restarting my device and booting it into recovery mode, and it doesn't work..? Recovery mode has never worked on this device unless I run an ADB command in CMD or using an app with root access.
I've been holding down all 3 buttons for 3-5 seconds and releasing, tried using the up button too the same way.
If I leave the device running, it stays stuck on the AT&T screen.
newbkilla said:
I flashed using Odin with BL, then i flashed KK4 Corn Kernel v7.0A. Now I try restarting my device and booting it into recovery mode, and it doesn't work..? Recovery mode has never worked on this device unless I run an ADB command in CMD or using an app with root access.
I've been holding down all 3 buttons for 3-5 seconds and releasing, tried using the up button too the same way.
If I leave the device running, it stays stuck on the AT&T screen.
Click to expand...
Click to collapse
Try reflashing corn kernel. And with gb bootloaders, it will always be the 3 buttons combo to get in recovery.
Sent from my SGH-I897 using xda app-developers app
BWolf56 said:
Try reflashing corn kernel. And with gb bootloaders, it will always be the 3 buttons combo to get in recovery.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
I swear, the phone will not allow me to boot into recovery mode let alone get passed the AT&T screen.
smokestack76 said:
Works every time for me if i power off. Hold down volume up and down and power. Wait for the att screen to go off and as soon as it comes back on the second time let go of the power button and continue holding both volume button down until you see recovery booting. It works the same with a usb cable plugged in for download mode.
Click to expand...
Click to collapse
I even tried this and I was unsuccessful.
Okay, I must be missing something here, because none of the oneclicks work except for designgears stock 2.1 ROM (I897UCJF6).
I'm going to start over and i hope someone here can guide me in the right direction:
I'm running stock 2.1 ROM, might as well be straight out of the box. I want to upgrade to 2.3 with GB BL so that I can flash whatever ROM i wish in the future. Kies Mini doesn't work, so that's out of the picture.
The One Clicks that 4-2ndtwin post a link to (both IlluminatedOne's and his own) do not work, meaning that I get stuck at the AT&T screen and it just pauses there. I have no problem getting into Download Mode or Recovery Mode while using the WORKING 2.1 I897UCJF6 ROM, however if I run ANY of the oneclicks other than I897UCJF6, i cannot boot into Recovery Mode.
I'm running Windows 7 64 bit, I have the 64bit drivers installed. I have tried Windows XP as well.
Sorry for the double post, but what in the world do I do?
Ok. Go here...http://forum.xda-developers.com/showthread.php?p=30840818
This is the full firmware for i897ucKF1 GB 2.3.3 with Bootloaders included. This is not a One Click. U will use the regular Odin and load the files in their cooresponding tabs of Odin. PDA file in PDA slot of Odin. CSC file in CSC slot. MODEM file in MODEM slot. Pit file in pit, etc. Connect in Download mode. Start. After this u can flash Corn Kernel and proceed.
Some of the Captivates don't like One Clicks. So maybe that is the deal with ur phone.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
Ok. Go here...http://forum.xda-developers.com/showthread.php?p=30840818
This is the full firmware for i897ucKF1 GB 2.3.3 with Bootloaders included. This is not a One Click. U will use the regular Odin and load the files in their cooresponding tabs of Odin. PDA file in PDA slot of Odin. CSC file in CSC slot. MODEM file in MODEM slot. Pit file in pit, etc. Connect in Download mode. Start. After this u can flash Corn Kernel and proceed.
Some of the Captivates don't like One Clicks. So maybe that is the deal with ur phone.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Well I did finally get it downloaded off of your dropbox and I used the Odin that came with the zip file and flashed all files given (CSC, Modem, PDA and PIT) and it's still stuck on the AT&T screen.. haha. Any other ideas?
Maybe this
I upgraded from stock Froyo 2.1 rooted to GB 2.3.5 with bootloaders using this package:
http://forum.xda-developers.com/showthread.php?t=1285616.
If you look here at post #3:
http://forum.xda-developers.com/showthread.php?p=18370912
it says this:
**Once u have the i897 Gingerbread Bootloaders, it is not necessary to flash bootloaders again. The i897 Gingerbread Bootloaders are backwards compatible, therefore you can flash Eclair, Froyo, Gingerbread, CyanogenMod, and MIUI Firmware/Roms without the bootloaders included, per the proper install instructions.**
Maybe your boot conflict is because you're trying to load the GB bootloaders again and there are 2 boot files or a glitched boot file. I'm no expert but I tend to go back to the simplest reason when I'm troubleshooting something that should work. Though it seems like a complete wipe and re-partition would delete bootloaders, maybe it doesn't from the sound of the above.
Try the package without bootloaders from here:
http://forum.xda-developers.com/showthread.php?t=1285616
It loads the rom and the kernal with CWM all at once with a full wipe and repartition.
I always remove the Sim and external sd card before flashing and disable my anti-virus when I'm in Winblows.
I hope SOMETHING works for you.
akone2 said:
I upgraded from stock Froyo 2.1 rooted to GB 2.3.5 with bootloaders using this package:
http://forum.xda-developers.com/showthread.php?t=1285616.
If you look here at post #3:
http://forum.xda-developers.com/showthread.php?p=18370912
it says this:
**Once u have the i897 Gingerbread Bootloaders, it is not necessary to flash bootloaders again. The i897 Gingerbread Bootloaders are backwards compatible, therefore you can flash Eclair, Froyo, Gingerbread, CyanogenMod, and MIUI Firmware/Roms without the bootloaders included, per the proper install instructions.**
Maybe your boot conflict is because you're trying to load the GB bootloaders again and there are 2 boot files or a glitched boot file. I'm no expert but I tend to go back to the simplest reason when I'm troubleshooting something that should work. Though it seems like a complete wipe and re-partition would delete bootloaders, maybe it doesn't from the sound of the above.
Try the package without bootloaders from here:
http://forum.xda-developers.com/showthread.php?t=1285616
It loads the rom and the kernal with CWM all at once with a full wipe and repartition.
I always remove the Sim and external sd card before flashing and disable my anti-virus when I'm in Winblows.
I hope SOMETHING works for you.
Click to expand...
Click to collapse
Thanks for the tips, however I'm flashing the stock 2.1 ROM with the BL, so even if I had the GB BL's flashed, wouldn't they be overwritten when I flash a the stock ROM? Nonetheless, I tried flashing without the BL, and it still froze at the AT&T screen..
What happens to ur phone doesnt make sense...idk. Honestly dont get it...
The only thing u can run is stock eclair... and no other plain stock will boot and run ?
Wish i could be of more help.
Sent from my SGH-I777 using xda premium
Have you tried getting into recovery when its stuck at the att screen and clear the cache or whatever other clearing you can do? Maybe CWM will be loaded. If it re-boots while holding the three button recovery method, that may be a good sign. Then at the re-boot, let go of the power button at the next att screen.
Does Odin give it a pass?
Are the roms your flashing rooted before you flash? In other words is Eclair rooted and then all others?
Pull the battery at the att screen?
Or go back into download mode and re-flash if that doesn't work.
I'm just guessing and the last 2 suggestions could be dangerous.......................I don't know.
Edit: Have you tried this?: http://forum.xda-developers.com/showthread.php?t=884364. It has a root file and a CWM file for Eclair. I tried the links to those and they did connect.
akone2 said:
Have you tried getting into recovery when its stuck at the att screen and clear the cache or whatever other clearing you can do? Maybe CWM will be loaded. If it re-boots while holding the three button recovery method, that may be a good sign. Then at the re-boot, let go of the power button at the next att screen.
Does Odin give it a pass?
Are the roms your flashing rooted before you flash? In other words is Eclair rooted and then all others?
Pull the battery at the att screen?
Or go back into download mode and re-flash if that doesn't work.
I'm just guessing and the last 2 suggestions could be dangerous.......................I don't know.
Click to expand...
Click to collapse
I've found that when applying the stock Eclair ROM, it never says "pass", it says reset--however it works and reboots into 2.1update1. My phone isn't rooted, it has been though. I've realized that some oneclicks say "Re-partition, Full Wipe". My experience is that my phone never enters recovery mode so my phone never wipes anything like the oneclick intends to do. I have not been able to enter recovery mode once I have flashed 2.2 or even 2.3 with or without bootloaders. Do you guys think that's the problem? And if it is, how would I enter recovery if the button combo doesn't work...?
akone2 said:
Have you tried getting into recovery when its stuck at the att screen and clear the cache or whatever other clearing you can do? Maybe CWM will be loaded. If it re-boots while holding the three button recovery method, that may be a good sign. Then at the re-boot, let go of the power button at the next att screen.
Does Odin give it a pass?
Are the roms your flashing rooted before you flash? In other words is Eclair rooted and then all others?
Pull the battery at the att screen?
Or go back into download mode and re-flash if that doesn't work.
I'm just guessing and the last 2 suggestions could be dangerous.......................I don't know.
Click to expand...
Click to collapse
Pulling the battery is not a great idea, it's only when it's "needed".
OP, I'm must say I'm quite confused myself, none of it makes sense.. Although, did you try flashing a 2.2 custom ROM?
I'm thinking you have some either bad or corrupted files/hardware keeping you from flashing but if you're able to flash a custom ROM, then there might be hope.
Also, a JTAG/box might work. They now flash stock GB and could *maybe* overwrite w/e in your phone that is messing with all your flashing.
BTW, it sounds like you are doing the wrong thing to get into recovery. Hold both volume keys, and then press the power button as you would to turn the phone on normally/until the screen turns on. Then, keep holding the volume buttons until you see recovery.
And which at&t screen are you stuck on? The very first one or the boot animation?
Sent from my Nexus 7 using Tapatalk HD
korockinout13 said:
BTW, it sounds like you are doing the wrong thing to get into recovery. Hold both volume keys, and then press the power button as you would to turn the phone on normally/until the screen turns on. Then, keep holding the volume buttons until you see recovery.
And which at&t screen are you stuck on? The very first one or the boot animation?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
That's the strange thing, it will NOT boot into recovery when I flash say KK4. I hold the volume buttons for over 30 seconds, and it just stays at the AT&T screen. It gets stuck before the boot animation, I never see it when I try to flash anything 2.1+. I have booted into recovery mode before, so I know that I am doing the button combo properly.