Good Afternoon,
I've put this post to see if I get some help or indication on a problem I have with my TyTN II.
The problem that I encounter is the following, for some time now, whenever I turn on the phone or just taking it out of the standby mode, it starts without me wanting a record voice message, as if carrying the button that is attributed to the effect (left top) and beyond that, I stopped having any kind of response in the central fleet buttons on the phone (call, hang up, internet, email, as well as giving access to the menus screen. The only thing that works is the center button, that when I click, brings up the start bar, no idea whatsoever why it does that.
Thank you for your help, because the phone has been with his options limited, and it consumes a lot of battery and memory with the issue of recording the voice call whenever it comes out of standby.
Thank you in advance for the help you can give me.
Greetings
Carlos
Related
Hi everybody, my first message here
few days ago i got my new Qtek 2020i... but i have some problems with it..
1) sometimes (expecially when activly using) I hear single flicks(sounding very likly elecric discharges) from device...(even when sound is off)... last time i noticed that it sounded at the moment I quit program and memory it used was released... but sometimes it flics just when standing in cradle.... does anyone have same noisy sounds? or it's damaged device, and I should replace it?
2) I can't close dialing screen... I installed spb plus plugin which makes programs really close when you press X button.. it works, but it refuses to close dialing screen - when i press top rignt corner shortly - it blinks with phone screens I just used(exacly them - if I pressed on "quick call" button, then returned and clicked on history of calls and returned again - it will fastly show that 4 screens in that order) and returns to dialing screen again.... I can exit it only by holding top right corner button for 3 sec's or start button... but it still holds "phone" task in memory(spb plus shows it.... but there is now such task until I use phone for the first time after soft reset) - and if I use phone again - the number of screens I'll see on exit will increase and increase untill I make soft reset.... Of course I can always exit by long pressing the button... but it's annoying, and maybe there is another solution?... is that my software problem? or it's windows bug?
ps thanks for nice forum, I already found a lot of usefull info here =)
There seems to be a problem with the Kaiser. After finishing a phone call on the Kaiser the backlight goes off and stays off and I cannot access the Start menu. I can access all other functions but backlight stays off and one still cant get into the Start menu from anywhere on the screen. I have to press the power off button quickly once and then wait a second, press it again to be able to access the start button or the light to come on. This is definitely a bug in the tytn II and I hope HTC is doing something about this.
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
sudo009 said:
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
Click to expand...
Click to collapse
I noticed this as well...
pretty crazy.
Hmm I haven't that problem. Danish HTC TyTN II
Do you folks have the password set? I have heard that that can cause this problem. Try to turn off password checking.
Hi @ All, any news about that problem?
I have a solution
I had the same problems and after installing all the ROM's and still have the same problems, I found out that the problem is not in the ROM it is in the 3G network, disable the 3G network and set it to GSM and all the problems will disappear.
This was nothing to do with 3g.
It was a pre-programmed fast sleep setting that was flawed. Download Kaiser Tweak and turn off all the sleep during call options.
Difference in memory in use
I have problem with my TyTN II, I don´t know why, but when I control the state of the memory in use, it seems to be 112 MB in use and 19,4 MB free. But when I control every item (Applicationdata, Confimgr, ProgramFiles etc., even including hidden files) and calculate total then it seems to be only 45 MB in use. Can anyone explain this
thanks
Hi
I don't know if anyone has experienced this or has a fix for it.
I picked up my Tytn II last week and I must say it's a cracking piece of kit. I seem to be experiencing a problem though.
If I say for example make a voice call and then hang up. I find that the word "phone" replaces the start menu in the top left hand corner of the screen. This wont default back to start and effectively makes the whole top row of icons inoperable. Ie battery status volume control etc. I have found this problem when using other apps, ie calendar, so it's not specific to just making voice calls.
The only way to get the top row of icons working again is to do a soft reset
All icons not on the top row seem to work ok (apart from keylock)
Any ideas ??
Massiv
Dont soft reset... just hit the power button to go into standby, then hit it again and the device will work again.
Hey presto it worked. Thanks for that. It's a bit annoying having to do that though.
Massiv
Its not a fix... its just a workaround.
When you end calls. Try first pressing the end call button, then the ok button.
I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks
threezor said:
I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks
Click to expand...
Click to collapse
No this is not normal.. Think you need a hardreset.
threezor said:
I've been having problems with my new MDA Vario III.
Whilst using the phone, I cannot use any other applications or even get the start menu to appear. Is this normal?
Also after hanging up (when either receiving or initiating a call), I need to press the power button twice to get the today screen back. Until I do that, the entire device just seems to freeze.
Are these known problems?
Many Thanks
Click to expand...
Click to collapse
I woldn't call it "normal ", but the symptoms you described are pretty typical. My Tilt does the same. There are three known issues here, at least one of them is assotiated with using password/pin.
Issue 1. The screen goes black during the call. The workaround I use is to rotate the Jog Wheel. That wakes up the screen.
Issue 2. The Windows Start button doesn't work during the call. Don't remember the workaround for this, but I believe you can close the dialer screen and scroll up and down through you Today list.
Issue 3. When you terminate the call the screen becomes deem and some buttons may not work. The solution is to press the power button twice after each call (or disable the pin).
Sorry can't give you links (hard to do that on the phone ), but these issues have been discussed on this and other forums. Hope they will be solved in future updates! Really annoying issues, IMHO!
Dear PDA experts, please help me!!
since a couple of days I am having a VERY annoying problem with my HTC Diamond. This occurs when I am using the original hands-free. It looks like the cable is losing contact or making an incorrect contact...
So, when using the hands-free, the phone starts dialing the last dialed number by itself. When I am listening to music, the music stops and I am hearing how the phone is dialing. This usually happens, when I make the move to put my phone in my pocket. Also, when I speak with someone, the phone automatically puts him on hold, which is even more annoying for the other party! The problem persists even when I switch off the phone module, it still tries dialing!
I had tried many times to get rid of the voice dialer (sddialer.exe), but I cannot delete or rename the file even when I connect the Diamond to a PC. Finally I have disabled it from the registry and it still starts dialing when I make the move to stick it into my pocket!
And I dont have the impression, that the cable is somehow defective, as when I am listening to music, it does not break up. And it always does, when there is a problem with the cable, unfortunately I have a lot of experience with defective hand-frees. Please please help me!! It is not worthy to buy a new handsfree for such an old phone... Is there a way to disable all the buttons of the hands-free, it is the last possible solution I can think of...?
Use the lock screens
My Diamond did that too.
There are several lock screen capabilities that you can enable under settings. More important if you added a custom Rom they usually have a few different options.
With the custom Rom I was running, I could make a call and after pushing the power button, it would lock the phone when on the line with someone. This would happen if you hit any button after the power button was pressed (which usually turns off the screen).
Hope that helps.