[Q] Problem to flash Cingular 8125 - 8125, K-JAM, P4300, MDA Vario Software Upgrading

When i try to flash my PDA, the program run ok but when i got process bar in pc, my pda goes black and then i get the 3 color screen and the flash program gonna crash... i got the same error whit all flashing programs, what can i do?
thanks

Related

Big Problems!!! System is freezing all the time!

Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
DerGregen said:
Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
Click to expand...
Click to collapse
Flash from bootloader. Make sure you're hard SPL though, or that it's a compatible ROM for your CID.
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
manuv1615 said:
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
Click to expand...
Click to collapse
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
DerGregen said:
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
Click to expand...
Click to collapse
You said that you could enter bootloader menu right?
now tell me, whats written there?
i'll wait here,.
Theres a 4 colour screen (red, green, blue and white)
And in the red bar is a text with a yellow font:
KAIS139 MFG
SPL-1.0.0liPof
CPLD-8
And below in the withe bar stands "Serial" or "USB.
What rom did you use?
try HardSPL 3.56 by jockyW,.
then reflash your ROM,.

Need Help! Bricked Phone??

Hey all,
I was trying to upgrade my Topaz to WM6.5 and obviously something went wrong.. Now when I turn the phone on, it goes to the tri-colour screen but displays the message Upgrade ROM code error please try again. After that, it goes to the white loading screen and just stays there until the numbers 00068002 in red appear at the top of the screen. Then it goes back to the tri-colour screen. I've searched the forums and tried some of the suggestions out there. Nothing has worked! Was wondering if someone could really halp me out with some step by step instructions!! Thanx in advance!
PS: I have HardSPL 1.83 installed already. That installation went well without any problems. It was when I went to flash the rom this happend.
i would suggest downloading another ROM (try the orginal ROM of your language http://forum.xda-developers.com/showthread.php?t=576620) and copying the TOPAIMG.nbh onto your storage card (ROOT DIRECTORY). now turn the phone on by pressing volume + and power button and then follow on screen instructions.
good luck!
dont worry, just a bad flash because of a corrupted rom
redownload the rom or any other rom.
use the card flasing as described by Drag-on or remove the storage card, (just tomake sure it does not see the rom image on it). connect it to pc. wait untill it shows usb on the 3color screen. wait untill the pc is finished installing drivers and then start the customRUU. that came with the rom you are insatalling
that should do the trick
success
Here's the thing, when I connect the phone to the PC, the PC can't find the phone anymore.. Well, it is connected, but it's not showing up on the computer.. I also don't know the original rom language for my phone.. My serial number begins with HT947L, anyone know?? I tried installing from the computer but it gives me the invalid vendor ID error..
ur computer is not suppose to read it like it would normally. (it wont recognize it in device center) but its connected. use the ruu that comes with the roms u download and u should be able to reflash ur device and dont worry its not bricked.
if u trying to do it manually rename RUU_signed that u get when u download a rom. rename it to topaimg and copy it to the root of ur microsd. then insert the card into the phone and turn it on. now ur phone should recognize the new rom and ask u if u want to install it. hope this helps
I haven't been able to find a rom that works.. I've tried several roms.. I rename them TOPAIMG.nbh and put it in the sd card but it never works. The phone will go to the loading screen and then the numbers 00068002 in red appear and then it just goes back to the tri colour screen with the words Upgrade ROM code error please try again. It just stays there after. When I try to do it manually from my computer it keep sgiving me the Invalid vendor ID error. I'm totally stuck.
I don't know if this will help, but when trying to do it manually, the program says I don't have a img on the phone. the version of the img I have is just left blank.
Update: Thanks for everyone's help! I finally found a rom that actually worked. It installed and everything. I still don't know why it had to be that certain rom and I still don't know why I couldn't flash from the SD card method. I'm really just happy everything is up and running again. I'm never flashing my phone on my own again.. lol.. If anyone knows why I couldn't flash from my sd and why I had to get a certain rom even though I had HARDspl installed please let me know. I would like to know just for future reference.

Help! My Diamond cant boot and i want to flash it to Original

Hi everyone.
Ive got a MAJOR Problem here.
My Cell Phone doesnt start at all.
If i put it one the USB Cable it can Start up like 5 Seconds.
Then it Reboots and Reboots again and again by 5 Seconds.
If I Disconnect the Phone from USB screen turns Black Immediately...
I thought it could be the Batterie... but.. it worked just fine yesterday..
(have i Mentioned that this weird Sticker on it turned red..? Some kind of sign saying me it got wet?)
All this started as i got a Coloured screnn with saying ´´Serial´´ @ the bottom of the Screnn... just exact like the Flash Screen
I Flashed the Rom which is on the Internal Storage i put bevor. To bad it aint the Stock ROM!
Then i also tried Hard Reset.
But everytime i boot... i only get as far as 5 Seconds.
Is there any Chance to Flash this Baby with original ROM (Stock ROM, RADIO and SPL)
I want to send that Baby in... but if they find out i Flashed it... i wont get any Warranty... ;(
So PLEASE GIVE ME ANY ADVICES!!!!!
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
krisztian b said:
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
Click to expand...
Click to collapse
You only can Flash if u got a Active Sync connection.
So ... Cell cant boot... i cant flash...
HELP
Just go into bootloader mode (you have Hard SPL installed right?) by booting up the phone while holding down the volume down key. Then connect it to the pc with the USB cable and run the CustomRUU to flash another rom. Should work! Else you should try to MTTY (that solves the resetting stuff right?).
I was just about to say to try to get Diamond into bootloader mode manually. http://forum.xda-developers.com/showthread.php?t=405659
MTTY wont work... cause i cant boot at all
But THX for your help flashing it back to Original...
This Thread can be closed

[Q] When flashing with BVJVC my phone became stuck on boot screen

Hi guys, since I had this problem I have flashed darkys rom because I know it works and needed a working phone but I still need help flashing BVJVC as I wish to have my stock orange rom back.
The problem is that when I download BVJVC from sammobile.com (formerly samfirmware.com) I then load up odin and load the JVC_JV6_JV3.tar file into PDA (it's just the one file) and put my phone (Galaxy s i9000) into download mode, plug it into my computer and click on start. It all seems to go well, no errors showing in odin and when complete my phone comes up with some kind of status 7 error (I can't remember the exact thing it said) and just sticks on the samsung galaxy s screen (the one the phone boots up from)
I have also tried using check fus downloader, selecting Orange UK and it downloaded the same rom, it too failed. And I'm not sure what to do with the zip.enc2 file as I just unzipped the normal zip file and used the .tar file within that. Not that it's important.
Please can you help as I really would like my stock rom back and to be able to update via kies again.
Thankyou in advance.

S5830 non-flashable via ODIN?

Hi all,
I've tried to put an ICS ROM onto my Ace and managed to screw it up, it boot loops, and I can't use the recovery because it's CWM6 with the graphics error that causes it to display a solid blue screen. so i've tried to use ODIN (v4.42 if that matters) to flash a stock ROM onto it but every time I try to use regular download mode it won't connect to my PC, but, it connects in emergency download mode. problem part 2: ODIN will not flash to the thing it gets stuck at "<1> setup connection" and will sit there and do absolutely nothing
anyone know how or where I can find a fix for this thing?
Never mind, got it working

Categories

Resources