I have the overcome ROM flashed on my tab and i was wondering if it is already overclocked due to the ext4 kernel or do i need a program to set the overclock speed like setcpu?
which kernal did you install? all of the OC voodoo kernals will say "OC" at the end of them.. its usually a good idea to get setcpu to control your processor anyways.
I have the ext4 kernel installed, I do have setcpu installed too.
The kernal will oc it by itself but using setcpu will allow you to customize your frequency.
Sent from my DROIDX using Tapatalk
Related
I want to install sentiroN's kernel so i can mainly undervolt to save battery, but i'm also looking to overclock to 1200 mhz, which version of his kernel should i use?
And which version of Xan's voltage control?
Thanks.
hamburgertrain said:
I want to install sentiroN's kernel so i can mainly undervolt to save battery, but i'm also looking to overclock to 1200 mhz, which version of his kernel should i use?
And which version of Xan's voltage control?
Thanks.
Click to expand...
Click to collapse
Use setiron's 1.4.7 oc @1200. This is Odin-flashable only. Don't install it via CWM. Link below.
http://forum.xda-developers.com/attachment.php?attachmentid=466664&d=1292593336
Get Xan's Voltage Control 2.0RC3. That's the version I'm using with setiron's 1.4.7 oc @1200.
Just make sure you back up all your data and disable voodoo lagfix beforehand. Kernel swapping doesn't always go smoothly.
I tried overclocking my phone with galaxian and semaphore kernels. I overclocked my phome to 1.2ghz and tried other frequency not lower than than 1ghz but I keep on getting hangs when waking up the phone to unlock and sometimes while using the phone. how do I fix thix problem? I'm on darkys rom 10.2 extreme edition.
Sent from my GT-I9000 via XDA Premium App.
Rom: Darkys Rom 10.2
Galaxian is on 1.2 ghz on default only then how did you overclocked it ! Try semaphore kernel its better, believe me i have used galaxian for 2 weeks on jetpack rom and got bit of lags and quadrant score near 2600 only while on semaphore I get 3000 on 1.2ghz after overclocking using tegrak overclock app.
Sent from my sgs
kernel: galaxian
Rom: jetpack
i used both tegrak and set CPU apps to overclock it. when i used the tegrak, i clicked on the load module then clicked on CPU max frequency, chose the 1.2ghz, then says watching stability the the watcher stopped working or the countdown stops at 298. chose another frequency it did the same. i tried it until the countdown works, and it works but i get hangs sometimes. would you be good enough to give me all info to overclock it manually in the optimize menu in the tegrak app?? thanks
anyone have fix for this?
yes, clean your phone and install Tornado.
I was using tegrak. But my suggestion is dont use oc. Bcs OC is always risk and we are not getting any performance increase except the benchmark score.
First try wiping cache/dalvik cache and use Ultimate Kernel Cleaning Script - 2.0 via CWM. If that doesnt improve the lags better do a full install via odin. Its better than a factory reset co's u will lose all ue data any way. Pls do back up all of ur apps and personal data. Try using mybackup root or titanium backup from market.
i think you should overvoltage on 1200mhz
you can use tegark overclock ultimate or voltage control ultimate
nearly every rom has a flashable zip file via cmw to overclock cpu to definite speed but the questien is :what does rom overclocking depend on ? that makes a rom overclock cpu to a definite speed and another rom to another speed ?
What makes a ROM overclockable is its kernel. So when you install a .zip file to overclock, you are installing a new kernel, or a patch to it. So it will be possible for you to overclock. And the speed is dependable on the kernel. Different ROMs may be the same OC speed (not necessarily the same kernel, but one with similar speed configuration).
The Rom developer overclocks CPU by understanding the safest overclockable frequency by identifying chipset of mobile. Then he edits ramdisk in boot.img
Sent from my GT-S5570 using the XDA mobile application powered by Tapatalk
I have Antutu CPU Master Pro and the change log for version 2.5 says that it now supports GPU overclocking for Galaxy S devises. I think i have at least found that the Devil kernel supports GPU overclocking but does anyone know of any others? I am currently using Glitches kernel and it works great, but i'd like have the ability to overclock my GPU as well.
thanks in advance
unglued94ta said:
I have Antutu CPU Master Pro and the change log for version 2.5 says that it now supports GPU overclocking for Galaxy S devises. I think i have at least found that the Devil kernel supports GPU overclocking but does anyone know of any others? I am currently using Glitches kernel and it works great, but i'd like have the ability to overclock my GPU as well.
thanks in advance
Click to expand...
Click to collapse
umm.. derteufel has updated his thread that the devil kernel doesn't support gpu oc, and he reverted back that option in his newest kernel for the sake that it doesn't work, although the options shows in the devil config application.
afaik, there's no kernel that currently support gpu oc
Thank you!
Sent from my GT-N7000 using xda app-developers app
irfarf said:
umm.. derteufel has updated his thread that the devil kernel doesn't support gpu oc, and he reverted back that option in his newest kernel for the sake that it doesn't work, although the options shows in the devil config application.
afaik, there's no kernel that currently support gpu oc
Click to expand...
Click to collapse
Those option are getting removing in the next release of Devil Kernel Config app.
Sent from my SGH-I896 using XDA
i am trying to overclock my bionic to 1200mhz or more. im running CM10.1 and when i go into cpu settings it just says max is 1000mhz and i cant mess with the minimum clock. ive tried setcpu and no luck. any help. is there a kernel i need or what? or is it even possible? Please let me know
ModestMouse1312 said:
i am trying to overclock my bionic to 1200mhz or more. im running CM10.1 and when i go into cpu settings it just says max is 1000mhz and i cant mess with the minimum clock. ive tried setcpu and no luck. any help. is there a kernel i need or what? or is it even possible? Please let me know
Click to expand...
Click to collapse
Right now you will need to install a Kernel that allows for OC on top of your current custom ROM. OC Kernels are marked with "OC" so that you can find them easily.
dragonstalker said:
Right now you will need to install a Kernel that allows for OC on top of your current custom ROM. OC Kernels are marked with "OC" so that you can find them easily.
Click to expand...
Click to collapse
I'm also running CM 10.1 on my bionic, where can I find a OC kernels? -Thanks
ske1555 said:
I'm also running CM 10.1 on my bionic, where can I find a OC kernels? -Thanks
Click to expand...
Click to collapse
you can overclock your device here http://www.droidrzr.com/index.php/topic/16813-kexec-code-kernel-42413/ i hope it runs good for you just flash in safestrap
Will look into this
Sent from my XT875 using xda app-developers app
This kernel is no longer being developed, so it does not incorporate any recent changes from the Cm builds.
Sent from my XT875 using Tapatalk 4 Beta
Blurry 2.5 has a oc kernel built in with it. 1.2gig. Has CPU sleeper an custom governers with it.. Only bad thing is its on 4.1.2 not 4.2.2. In my opinion I'd rather be on 4.2.2 then gain 200mhz