Any advice on how to achieve the upgrade. I have attempted with BAUpgradeUT and and MAUpgradnoid without sucess. My Rom version is 5.03.02 WWE (3/2/05) Radio Ver - 1.06.00, Protocol Ver 1337.38, ExtRom Ver - is blank. Getdeviceid recognises as a PH20B.
Using BAUpg is don't recognise device
Using MAUpg it correctly identifies CE image ver5. it goes to check information on device, Activesync shuts down, then Error 101 connection error
Any ideas ?
Connection error....
Have you tried putting the device into bootloader mode before cradling it?
I initially had the same problem upgrading my BA.
Press camera (media), record, power all at once while you reset. The screen should display "Serial" until you cradle the device, then switch to "USB."
Make sure you run the upgrade program twice, it often fails the first time.
Hope this helps, post again if this doesn't work.
Mick...
Hi, I want to make a flashable radio rom 2.47.11 from this thread: http://forum.xda-developers.com/showthread.php?t=268031&page=10 This rom is locked, so I cannot install it on my cid-locked wizard. I've extracted 96000000-GSM_0.nb and now I'm trying to make nk.nbf, but I don't know how. Can I use this settings? And if the radio rom upgrade will fail, can reflash it?
Nobody knows how can I make it?
Patience, Jimmy.
There is no IPL/SPL in the original 2.47 radio rom you extracted from. Rebuilding the nk.nbf this way probably won't help. I will tell you that you should supply a language like "WWE" and versions like 2.47.11 and leave the CID code blank if you want to try it anyway.
Exactly what error message are you getting when you try to flash with the new radio rom?
I don't remember exactly what error it was, but Wizard stayed in three color mode and the flashing wizard showed "Error " and some number...
Can you try the flash again even though the Wizard is in bootloader mode? Sometimes the ROM Update Utility will find it even though it's in bootloader mode. It might help to disconnect the Wizard from USB, reboot the machine, wait for it to COMPLETELY boot up (disk activity dies down etc.) then connect the Wizard and listen for the "device connected" sound. Then try the flash again. Screen print the error and, if you can do all that OK, I'm sure we can get the new radio on there either by downgrading it and CID unlocking it or by using aWizard.
I usually succeed to tune, update and correct my pc alone by Reading The ****ing Manual and the Forums. But now for a simple upgrade of my Trinity I fail. I'm becoming crazy. Then I call for your help, ans post to help others like me.
--------------------------------------------------------
My HTC P3600 is :
hard rest the htc (bottom hole)
reset : boot screen gives M05 B05 D1.23
Sys info gives :
ROM ver : 1.23.406.2
ROM date : 12 march 2007
Radio ver : 1.38.00.11
Protocol ver : 32.71.7020.12H
Rom ext ver : 1.23.406.103
-----------------------------------------------------
I Prepare by REMOVE EVERYTHING FROM HTC, AND START FROM NEW BASE.
- card removed
- reset from the parameter menu, with code 1234
- setup Active sync (no data, no agendq, no mails, etc etc, just the files are sync)
- sync
- remove battery, restart
- sync
-----------------------------------------------------
I upgrade and follow the guide from http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
1/ UPGRADE SPL
Enter manually bootloader to check :
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
>>> so I already have the correct 'hArd-SPL'
Must have re,ained from all previous install test I did...
so reset (bottom hole)
2/ UPGRADE RADIO try 1
download http://colrou.free.fr/1.50.08.11.exe
manual enter bootloader (on+photo+reset hole)
get :
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
plugin htc on usb cable (hear device connection, but active sync is not detecting any device itself)
run ROMUpdateUTility (RUU 3.1.3.2)
Run again ruu : ERROR 260 : no connection
run ROMUpdateUTility (RUU 3.1.3.2)
but stop on tricolor screen
TRIN100
IPL-SSPL by DES
TRIN100
SPL-1.07.ds
then ERROR 246 : DEVICE NOT RESPONDING ARG !!!
run again ROMUpdateUTility (RUU 3.1.3.2)
but it stays sticked in bootloader screen and report ERROR 260 : no connection
2/ UPGRADE RADIO try 2
reboot
sync
run again ROMUpdateUTility (RUU 3.1.3.2)
ok... ok ...
from 1.23.406.2 to "ROMBaker"
confirm install on the htc screen
goes stucked to bootload screen :
Go to tricolor screen
TRIN100
IPL-SSPL by DES
TRIN100
SPL-1.07.ds
then from RUU "ERROR 246 : DEVICE NOT RESPONDING"
run again ROMUpdateUTility (RUU 3.1.3.2)
but still stalled in bootloader screen and ruu report : ERROR 260 : no connection
2/ UPGRADE RADIO try 3
install enterbootloader
remove usb from activesync config
run enterbootloader on htc
fet
TRIN100
IPL-0.50
TRIN100
SPL-1.20.Olipro
run ROMUpdateUTility (RUU 3.1.3.2)
but get ruu report : ERROR 260 : no connection
Me too I managed to upgrade to P3600 WM6 - ADW-edition - English RC-2 version but when I tried to upgrade to NEW PDAMobiz WM 6.1 Trinity or any other rom I could only managed to get to the Tri-color the phone hang at Tri Color spl by des and then connection is lost the Ruu updater could find connection to my d810 ..... I hope someone could tell me what is my problems.
Thanks in advance
s4cr3d said:
Me too I managed to upgrade to P3600 WM6 - ADW-edition - English RC-2 version but when I tried to upgrade to NEW PDAMobiz WM 6.1 Trinity or any other rom I could only managed to get to the Tri-color the phone hang at Tri Color spl by des and then connection is lost the Ruu updater could find connection to my d810 ..... I hope someone could tell me what is my problems.
Thanks in advance
Click to expand...
Click to collapse
By the way I am using Vista.....
Solved ....I just use XP
i have same problem-error 246.i try everithing and no result.
Better to reflash original rom, i got hang once.... alway error 284 or 286.
Then kept loading the original till it finally back to official rom...
Now dare not upgrade rom...
ok, just want to make it short: (P3600 user)
1. I have WM6.1 ROM (FleNover 3.3 Black edition) installed.
2. When I want to downgrade to WM6 official, after 20% it goes error.
3. Now, it only shows 3 colors.
4. Here is my PDA information in 3 colors:
TRIN100
IPL-1.00
TRIN100 MFG
SPL-1.30.Olipro
5. When I want to upgrade with WM6 official, after my PDA shows the progress bar, it restarted and the update screen shows Error 286.
6. How do I fix it?
thank you very much
Hey,
Great site, made it all nice and easy for my first experience heh.
sent you $5 as a thanks, but seriously, these at the end of the guide?? Surely these should have been at the beginning??
Rog.
I will post guides later, but if you want a quick automated backup/restore you can use the following programs
* PIM backup (backup/restore SMS, MMS, e-mail, contacts, calendar, tasks, call history and more)
* Settings Saviour (backup/restore preferences, settings, auto install cab files & xml on restore)
Hi,
I have trinity and after OS and radio upgrades I noticed that the phone function doesn't work anymore - when turning on the device it shows "no gsm" sign. Afterwards it wouldn't boot in OS anymore - I tried to flash different OS and radios, but with no success - it stucks at 0% when trying to flash radio. I'm able to flash OS, but it won't let me past boot screen anyway!
I have flashed HARD SPL and also unlocked the device with unlocker.
What are my options - how to flash the radio?
Thanks!
DO I REALLY HAVE TO THROW OUT THE PHONE?
how can I flash gsm if the radio bootloader is corrupt?
same problem
hi karlux i`m having same problem did you find a solution for yours?
Hi, it seems that there are several cases when it's not possible to flash the radio back to Hermes.
So the devices stays in NO GSM state and you can use the as a PDA only - and the NO GSM error makes it to work realy bad - with a lot of errors - like: can't install some software, hungs up etc.
Hi, i've bough a p3600 on ebay.
The seller tell me the phone is out because he flash a bad radio version on the phone.
I try to upgrade some file. ( Rom OS, Radio, SPL,etc ...)
I try the splexploit...
BUT ... The phone already stay on startup. i can see HTC startup screen,the windows startup screen ...but never the today screen.
I try hard reset, htc official rom, cookeed rom,...but when i flash a rom with "gsm", the update freeze at 13%
I try with usb and with sdcard..same thing, already stay at 13% !
But if i flash hard spl, 100%, if i flash OS, 100%, just the radio freeze at 13%
Any idea please ?
update
after the boot, i've got a "no gsm" message near the radio version
other people got the same problem like me ...
God oli, help me please
I more or less had the same thing and solved it with the sc card flash page.
http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing
A rom that works for me to flash it back to the working original
http://www.allaboutphones.nl/forum/request-originele-spv-m700-rom-p3600-rom-t727.html
To download you have to register with them.
GL
Hi, updating the radio to 1.56 crashed, now I have the No gsm message and doesn't boot, running mtty from bootloader with info2 command it says supercid but I can't update any official rom SPA, WWE, ITA... the error is "vender id invalid". I've tried the sd method but returns to bootloader .
Any help will be appreciated.
You should try SSPL : http://forum.xda-developers.com/showthread.php?t=293632
And if it doesn't work the Des' Crash-Proof SPL :
http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66
and try to flash a radio rom again !
doesn't work
try again and again ...the phone block at 13% ( when the radio upgrade begin) ...
pfffff
I've the same problem and after several attempts without result I sent the phone to the workshop and they told me the problem is with the main board! (this cost almost the price of phone itself). Moreover, I've seen some where here that the problem could be caused by radio chip but I couldnt get the detail.
If you find a solution give me a tip.
i've test lot of thing.
I progress with mtty. but i've got a problem ..i can't downgrade the phone under SPL 1.05.
SPL 1.04 can "reset" the radio, or enter directly to the radio bootloader. With that, i can save my phone.
Try mmty (see the wiki => bootloader info) and with the mfg spl, you can try the method.
Guys,
I've got the same problem...
I've sim and cid unlocked my spv m700 some time ago, using wonderful software from pof. Everything went smooth.
Today I've decided to update radio rom to 1.38.00.11 to enable gps.
I've launched RUU, everything was ok till 44%, when I've got message "Communication error".
After that program tried to recover rom without success, I've got another message "Image corrupted"...
I've tried to reboot my spv (both SR and HR), after rebooting I see:
M 05
B 05 D 1.23
then those symbols disappear and I see only Orange logo.
That's it... The end...
Should I reload radio rom or both rom and radio rom to my DEAD spv? If yes - how?
Please help as I'm very disappointed, frustrated and so on!
Thank you!
Update: A-A-A!!! I did it! I revived my spv! Let me explain how (I'm kinda new to all this rom and and ssl things, so forgive me for mistakes, if there are any):
1 I ran unbrick software. Yesterday it did not work (said, that could not find smth), but today it worked fine.
2 I ran RUU and BINGO! That's it!
BTW, I have vista, but it still worked (I think, thanks to Windows Mobile Device Center, which I have installed).
Also, I killed wmd process in Task manager in the beginning (have read this recommendation somewhere).
Thanks to everybody for their help!
nyco,
could you please explain briefly what you did exactly and which radio and rom you used
thanks and regards
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Thanks stepw...
when I hit task 2A nothing happens.
Original ROM doesnt respond. I flash with cooked ones. Result 100% successful. I restart the phone- hang at boot screen.
stepw said:
Flash HSPL, then issue task 2A command from mtty. Flash full ROM.
Click to expand...
Click to collapse
Hi,
I'm already under the hard SPL. and "task 2A" not working.
Macars, try only with radio ripped or full original rom (from htc or cooked with radio) because some cooked rom have only OS.
Can you tell me what SPL you have?
Hard SPL?
Have you try splxploit ?
Can you tell me what rom you try oviplokos1 ?
thanks,
it shows SPL 9.99 and with this I cannot flash anything so what I do is to update with splxploit and then the phone changes to SPL 1.2 olipro. With 1.2 I can only flash coocked ROM and will go until the end 100% successful- (original ROM the phone does not respond), but when restarts with newly loaded cooked ROM the phone hangs at window login screen and when put it in bootloader the SPL 9.99 returns again.... the story goes on like this.
I'm becoming mad....
hi,
you can only flash cooked rom because the rom you flash contains only OS. When you flash HTC rom, the rom contains os+radio+spl+....other thing ...
Try this method to downgrade your SPL (9.99) to oli 3.20 :
1°) run splxploit
2°)when the phone reboot on the spl 1.20 oli, run HardSPL 3.20 olipro. (search on the wiki or the trinity forum
3°)upgrade to 3.20 oli ...
Now, when you go to the bootloader, you can see SPL 3.20 oli.
Try reflashing a radio only (see the upgrading topic, you will see radio 1.56.xxxx)
Tell me if this method work.
When i'm on spl 3.20 oli, i can load radio rom to 0%
when I downgrade my phone to spl 1.05, and i can run the upgrading to 7% (best score )
To downgrade to SPL 1.05:
edit the "unbrick.bat" on the splxploit folder.
Replace TRIN_HardSPL.nb to TRIN_SPL105.nb
try to find SPL 1.04. I'm sure if i got the spl 1.04 i can revive the phone
Did exactly as you said final result:
When i'm on spl 3.20 oli, i can load radio rom to 0% (and stays there )
hi,
ok, try to load spl 1.05 with splxploit, and when it is load, run radio upgrade (1.56.xxxx)
Try to find spl 1.04 and mtty it can be reset the radio bootloader
if you find 1.04, give me it
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
macars said:
hi nyco,
I tried with SPL 1.05 the result is the same as your reaches 7% and restarts. I'm still trying to find SPL 1.04 I found one for Hermes I tried but didnt work failed.
Click to expand...
Click to collapse
arf :/
You got exactly the same problem i have.
did you check if you have bad block (with mtty)
try format the phone with mtty.
i contact pof, but he doesn't answer me