always have the same problem......
After I flash cm6 together with the google apps package provided in cm wiki,
I reboot the phone and enter the os successfully
But when i press "setting" > "Applications" > "Manage applications",
the apps just keep computing for a long long time (Note that they are not installed in sd card, npthing to do with app2sd).
What happens to my phone ????
I don't have such problem flashing gingerbread rom (shadowmod)
My steps of flashing cm6
1.wipe all
2.nandroid restore official 2.2 rom
3.apply update (cm6 update zip)
4.apply update (google apps package)
5.reboot
Any experts can help me ????
I also have the same problem with froyomod.....
Thanks !!!!
Sorry about making a new post under this forum, but i didnt have permission to reply in the dev forum.
To ask Questions about developing your device, installing ROMs, software and themes you must go to the Q&A or General Forum.
noticed the LG screwed up - bad - here's why your UI is jerky! link, and decided to give it a try.
Code:
cat /system/build.prop | grep build
shows:
ro.build.lge.version.release=LGP990-V10b
ro.build.date=2011. 03. 15. (í) 14:14:22 KST
ro.build.date.utc=1300166062
So i go for the V10b (date 1300166062) linked on http://forum.xda-developers.com/showthread.php?t=1023354
did a nanodroid backup and tried to install the rom(zipfile) with clockworkmod from my SDcard.
Select the "Wipe Dalvik Cache" but leave the others unchecked.
Phone reboots and enter CLockwork recovery and attempts to install but it fails at the beginning of the installation and reboots the phone before I get time to read the error message.
What am I doing wrong?
I didnt wipe cache over V10B and it worked smooth. But i am on V10C now which is much better!
Sent from my LG-P990 using XDA App
upgrading to v10c, does that require any wipe, or can you just write it over your current version. Also, do you have a link to the package?
edit> found it here. http://forum.xda-developers.com/showthread.php?t=1035041
I upgraded via Lg updater. I cant give you links and yes just apply over it.
Sent from my LG-P990 using XDA App
zereke said:
What am I doing wrong?
Click to expand...
Click to collapse
Sounds like you use ROM Manager to boot into recovery?
Try booting to recovery manually by holding Power+Vol- while booting (until you see the yellowish A N D R O I D letters) and go from there.
If I remember right CWM Recovery and ROM Manager swap the internal and external SD card around or fails to mount the latter when booting directly to recovery from ROM Manager.
Hi , greeting everyone !
Before appearing ICS, I made a small update custom, including small changes in the original firmware 3.2.79.
This release is permanently ROOT, busybox is installed proper and is unique , Su and Superuser is up to date ! At the bottom you have Update of this version (activated vibrator and fixed adb command).
Included : 24/01/12
- new boot animation;
- battery percentage, and other new Icon;
- several applications in addition ( office free, flashplayer 11,adobe air.....+++);
- windows animations;
- Sony Ericsson Xperia Arc sound and other stuff.....
Now we have latest update of Su binary v3.0.3.2 , Superuser v3.0.7(41), unique busybox v1.19.3 installed into system/xbin ;
There is no need to install busybox.apk or busybox installer.apk from market, busybox is already installed into /system/xbin/
Also included some tweaks : - increase sdcard speed, - managemant ram memory....and increase reaction speed !
These are the files you need for install this Custom Rom :
- archos.ext4 => http://www.4shared.com/archive/tOxGcPqa/archos.html , http://hotfile.com/dl/143897684/d5edc5d/archos.7z.html
- zImage => http://www.4shared.com/file/KXp8bLDa/zImage.html ; http://hotfile.com/dl/144036333/e7d0e75/zImage.html
- initramfs.cpio.gz => http://www.4shared.com/zip/HnEobpnG/initramfscpiogz.html
How install :
- because the file structure is changed , you need perform a clean installation : Recovery -> Format System -> Reformat Devices...-> I Understand -> ok -> copy firmware_archos_it4.aos into new driver -> ok. After reboot copy archos.ext4 into Internal Storage ( data/media/), reboot into recovery , Recovery System-> Developer Edition Menu -> Remove Kernel ( for boot only to SDE) -> I Understand -> Ok -> Developer Edition Menu -> Flash Kernel and Initramfs -> copy zImage and initramfs into new driver -> Ok ! that's all ....now you have clean install custom rom
Solved - md5sum into superuser when you try to update the su binary , now check md5sum OK!
I did not managed any version of .squashfs because android compiler can't install busybox into system/xbin ( .squashf is NOT RW ), this is why I presented only version of ext4 ...Good Luck !
****************************************************************
Update : 27/01/12
- now >adb shell - fixed and enabel vibrator
- archos.ext4 => http://www.4shared.com/zip/dOscQIvA/archos_up.html ; http://hotfile.com/dl/143982123/b452656/archos_up.zip.html
What did you use to increase ram?
Sent from my HTC Desire HD using xda premium
Quinny899 said:
What did you use to increase ram?
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
Hi! ...I just increase free ram , lol !
surdu_petru said:
Hi! ...I just increase free ram , lol !
Click to expand...
Click to collapse
Ok
Sent from my ARCHOS 80G9 using xda premium
good job tomorrow i try it (multumesc )
Maryanos25 said:
good job tomorrow i try it (multumesc )
Click to expand...
Click to collapse
..cu placere ....incearca-l nu vei regreta !
with pleasure ...try it...you'll no regret !
Nu ama avut rabdare si l-am instalat. Merge ok. Merci mult.
Y dont have patience and y instaled. Its ok. Thanks.
Sent from my ARCHOS 80G9 using xda premium
Quick question, and I appologize if this is the wrong place for this, I'm currently running your 3.2.78 (ext4). Do I need to update the stock firmware directly from archos first or can I just flash this 3.2.79 rom over what I currently have. Also I "removed android kernel" earlier to always boot rooted if that matters. So what's the best way of going about this?
surdu_petru said:
I did not managed an version of .squashfs because I can't install busybox into system/xbin ( .squashf is R/O ), this is why I presented only version of ext4 ...Good Luck !
Click to expand...
Click to collapse
You can try this:
-get a copy of busybox and symlinks from a working rom (make a .tar or .tar.gz of G9's [email protected])
-copy busybox+symlinks in appropriate directories and chmod them (just to be sure)
-mksquashfs
This *should* work (I've messed around a bit with squashfs on another device)
First custom rom i've seen. Great ! Thank you very much. I will try it later
First thank you surdu_petru Every new rooted/modified rom, I need to start tablet with "original" rom to copy the ext rom into the tablet, and every time, restarting for the first time after the update from sde with the "new" rom, I have SuperUser with empty list (and I have to re-add all the programs in my list). Is there a way to copy the ext rom without booting with original rom? thank you and sorry for my poor english
hitman72 said:
Is there a way to copy the ext rom without booting with original rom? thank you and sorry for my poor english
Click to expand...
Click to collapse
Not yet, accessing /data/media requires a working system (adb is not present in SDE/recovery)
However you should be able to update using "previous" custom firmware- system filename is different
install directly over the version rooted 3.2.79.
Work good. =)
Boot animation - maybe simply text android install? =) Can i change it himself?
gen_scheisskopf said:
You can try this:
-get a copy of busybox and symlinks from a working rom (make a .tar or .tar.gz of G9's [email protected])
-copy busybox+symlinks in appropriate directories and chmod them (just to be sure)
-mksquashfs
This *should* work (I've messed around a bit with squashfs on another device)
Click to expand...
Click to collapse
OK thanks !....but do not want to complicate ... I let the compiler to perform, if he says he can not because I have not rw rights !...I left it ..... I know that there are solutions, but leave it in for users !
ro4sho said:
First custom rom i've seen. Great ! Thank you very much. I will try it later
Click to expand...
Click to collapse
Thanks , lol....
gegabit said:
install directly over the version rooted 3.2.79.
Work good. =)
Boot animation - maybe simply text android install? =) Can i change it himself?
Click to expand...
Click to collapse
Sure, you can change what you want, system is RW, but attention ! do it carefully !
gen_scheisskopf said:
Not yet, accessing /data/media requires a working system (adb is not present in SDE/recovery)
However you should be able to update using "previous" custom firmware- system filename is different
Click to expand...
Click to collapse
In my builds, I added a mechanism to do that, the idea was to add a ".update" to filename to have the initrd replace the old image with the ".update" image before mounting and booting.
Surdu_petru, I don't know if you did the same in your initrd. As gen_scheisskopf mentioned in the sde thread, wiping dalvik-cache is probably a good idea if build changes, it could be done silently there or asked with a menu ? And a common file naming convention between us would help, I saw that you use the archos.img, we could define this as a standard ?
letama said:
In my builds, I added a mechanism to do that, the idea was to add a ".update" to filename to have the initrd replace the old image with the ".update" image before mounting and booting.
Surdu_petru, I don't know if you did the same in your initrd. As gen_scheisskopf mentioned in the sde thread, wiping dalvik-cache is probably a good idea if build changes, it could be done silently there or asked with a menu ? And a common file naming convention between us would help, I saw that you use the archos.img, we could define this as a standard ?
Click to expand...
Click to collapse
Ok I know what you mean...and yes ! for Stock firmware_3.2.79 (files.ext4/squqsh).update exist into initramfs, but because I made some changes in directory structure into Custom Rom , now .update it's not perform .
Ok it's very good idea , for future I'll rename (archos.ext4/squashfs).update
Thanks for your advice !
surdu_petru
will there be a custom rom for the archos 80 g9 250hdd or a root method
it would be nice to have a custom rom on my hard drive tablet
root method only seems to work on sd card versions of this nice tablet
regards phil
philmein said:
surdu_petru
will there be a custom rom for the archos 80 g9 250hdd or a root method
it would be nice to have a custom rom on my hard drive tablet
root method only seems to work on sd card versions of this nice tablet
regards phil
Click to expand...
Click to collapse
Hi!
This custom rom it's work for G9 tablett 80/101 but I don't know if it is supported for HDD.....maybe @letama or or another endorsed person will answer.....for you !
I have flashed my xperia TX ROM with CYN 12 ROM and installed Gapps , but mistakenly i forgot to root my phone and install Super SU before that .
Now I can only open Recovery mode TWRP on my phone , and when i am trying to reboot after installation it is asking me to install super SU .
If i select yes , my phone restarts with sony symbol but nothing comes up and if I select do not update , still the same happens .
Kindly assist i am stuck, with no idea what do next , i tried installing apk version of super SU from net and transfer into my phone , but i cant even see the file to install in recovery mode .
My phone was working fine with with CYN 12 before but i was showing very limited space for apps and not allowing me to transfer apps to internal memory .
my email is [email protected]
THanks
Welcome to XDA Assist.
Please wait for the moderation team to move this thread to relevant section.
http://forum.xda-developers.com/xperia-t-v/help
In meantime you can try to flash a CWM/TWRP compatible Superuser Zip from SuperSU thread
http://forum.xda-developers.com/showthread.php?t=1538053
Have a good day.
XDA Visitor said:
I have flashed my xperia TX ROM with CYN 12 ROM and installed Gapps , but mistakenly i forgot to root my phone and install Super SU before that .
Now I can only open Recovery mode TWRP on my phone , and when i am trying to reboot after installation it is asking me to install super SU .
If i select yes , my phone restarts with sony symbol but nothing comes up and if I select do not update , still the same happens .
Kindly assist i am stuck, with no idea what do next , i tried installing apk version of super SU from net and transfer into my phone , but i cant even see the file to install in recovery mode .
My phone was working fine with with CYN 12 before but i was showing very limited space for apps and not allowing me to transfer apps to internal memory .
my email is [email protected]
THanks
Click to expand...
Click to collapse
CM12 doesn't need SuperSu, it's already rooted and has it's own method for granting superuser. Did you try to copy any file to the system partition? Maybe you did and there is a permission error...
Try wiping /data; if that doesn't work, wipe /data and /system and reflash the ROM.
XDA Visitor said:
I have flashed my xperia TX ROM with CYN 12 ROM and installed Gapps , but mistakenly i forgot to root my phone and install Super SU before that .
Now I can only open Recovery mode TWRP on my phone , and when i am trying to reboot after installation it is asking me to install super SU .
If i select yes , my phone restarts with sony symbol but nothing comes up and if I select do not update , still the same happens .
Kindly assist i am stuck, with no idea what do next , i tried installing apk version of super SU from net and transfer into my phone , but i cant even see the file to install in recovery mode .
My phone was working fine with with CYN 12 before but i was showing very limited space for apps and not allowing me to transfer apps to internal memory .
my email is [email protected]
THanks
Click to expand...
Click to collapse
try flash newer UPDATE-SuperSU-v1.94.zip http://download.chainfire.eu/396/SuperSU/
PACman ROM4.4.2PACman rom for Huawei Y560-U02 sc7731g/sc8830
Install TWRP v.2.8.7.0 recovery from here: http://forum.xda-developers.com/android/development/recovery-twrp-2-8-5-0-huawei-y560-u02-t3386486
Download pacman rom : https://drive.google.com/file/d/0B1MnFzuGjoAPcEl5clUyblJVTU0/view?usp=sharing pac_mod_zip
Copy this rom to sdcard or to micro sdcard. Reboot to recovery, wipe dalvik cache+data+cache.
Install pacman rom via twrp 2.8.7.0 , then wipe - factory reset, reboot system.
Install SuperSU, etc...
Do it on your own risk
In joy!
i install it but wifi not working
amiro13 said:
PACman ROM4.4.4PACman rom for Huawei Y560-U02 sc7731g/sc8830
Install TWRP v.2.8.7.0 recovery from here: http://forum.xda-developers.com/android/development/recovery-twrp-2-8-5-0-huawei-y560-u02-t3386486
Download pacman rom : https://drive.google.com/file/d/0B1MnFzuGjoAPTl85RnJkck1JbTA/view?usp=sharing
Copy this rom to sdcard or to micro sdcard. Reboot to recovery, wipe dalvik cache+data+cache.
Install pacman rom via twrp 2.8.7.0 , then wipe - factory reset, reboot system.
Install SuperSU, etc...
Do it on your own risk
In joy!
Click to expand...
Click to collapse
i instal this pac man rom but wifi not working please solve the problem
farzad3363 said:
i instal this pac man rom but wifi not working please solve the problem
Click to expand...
Click to collapse
Your device is Huawei y560-u02 sc7731g/sc8830 ?
For me wifi works perfectly, but you can try this fix :
Files that are responsible for the work of Wi-Fi:
bin ->
dhcpcd
iwnpi
netcfg
netd
wpa_cli
wpa_ supplicant
etc ->
connectivity_calibration ini
etc -> dhcpcd -> dhcpcd-hooks ->
.placeholder
20-dns.conf
95-configured
etc -> dhcpcd ->
dhcpcd-run-hooks
etc -> permissions ->
android.hardware. wifi.direct.xml
android.hardware. wifi.xml
etc -> wifi ->
wpa_supplicant.conf
lib ->
libhardware_legacy.so
libisp.so
libiwnpi.so
libwpa_client.so
lib -> modules ->
sprdwl.ko
Hello, this ROM is porting from Official ROM?
pickandrew said:
Hello, this ROM is porting from Official ROM?
Click to expand...
Click to collapse
Hello.
No, this rom ported from here :http://4pda.ru/forum/index.php?showtopic=755200
It's link :https://drive.google.com/file/d/0BzOIqKT_0H63NE5hNTVDR3YwRUE/view
I have not found official rom for sc7731g.
hi dear sir.wifi not work
amiro13 said:
Your device is Huawei y560-u02 sc7731g/sc8830 ?
For me wifi works perfectly, but you can try this fix :
Files that are responsible for the work of Wi-Fi:
bin ->
dhcpcd
iwnpi
netcfg
netd
wpa_cli
wpa_ supplicant
etc ->
connectivity_calibration ini
etc -> dhcpcd -> dhcpcd-hooks ->
.placeholder
20-dns.conf
95-configured
etc -> dhcpcd ->
dhcpcd-run-hooks
etc -> permissions ->
android.hardware. wifi.direct.xml
android.hardware. wifi.xml
etc -> wifi ->
wpa_supplicant.conf
lib ->
libhardware_legacy.so
libisp.so
libiwnpi.so
libwpa_client.so
lib -> modules ->
sprdwl.ko
Click to expand...
Click to collapse
my phone model is y560-u02 spd 7731.i install and do whatever you say but wifi not work how can i do.help me