As the title. ????????
app used > busybox installer .
1st > install to xbin > OK
2nd > intstall to bin > fail
reboot
My phone stuck on M logo
Any solution ??????
Note \ failure occurs with any version except version installed through AOR.
REGARDS
You only need to install to xbin...
That happened to me too when I was messing around and tried installing to anywhere else.
I think all I had to do was reflash a rom or something... I forget now.
Hey guys, I flashed EHNDROIX 12.9.11 and former releases without any problems.
Since the 12.9.16 after the correct flashing with every wipe that's recommended by the Dev, the system freezes. Actually it freezes during or while connecting to my Google account. If I skip the login and don't use the play store, everything works perfect for me.
Any suggestions?
No-one?
thbucko said:
No-one?
Click to expand...
Click to collapse
Reflash the newest version:
Wipe /system > Instal > wipe /data and /cache > Flash Gapps > Reboot
From the 12.8.31 at 12.9.11 i have only frezees ,with 12.9.21 work all
mrjraider said:
Reflash the newest version:
Wipe /system > Instal > wipe /data and /cache > Flash Gapps > Reboot
Click to expand...
Click to collapse
Had no time to try it and the new update works like it should. Thanks.
Try to install 12.9.24 .. it's very stable, smooth and has low battery drain.
hi all
i installed havoc os from stock miui rom
i did full backup before that
now i want to return to stock rom
i did restore but i have force boot into twrp ... icant reboot to system
any solution please??
thanks
no any idea??
You need to install the stock rom you were on before.
Follow these steps:
Go to TWRP-> Wipe-> Advanced Wipe-> Wipe system,cache data
Go to TWRP-> Install -> Flash STOCK ROM
Go to TWRP-> Install -> Flash Disable_DM-verity_ForceEncrypt.zip
Go to TWRP-> Restore-> Select backup-> ONLY RESTORE DATA (meaning you deselect BOOT and SYSTEM)
Reboot, and if you see the "powered by Android under the Mi Logo, it has worked.
Lastly, when you get into system, it may not work with the previous LOCKSCREEN code you had before.
If this is the case, go to TWRP-> Advanced -> File Manager -> and DELETE locksettings.db
Reboot, and it should let you in.
Thank you very much guys....
I will try and hope it works
tmptrsn said:
You need to install the stock rom you were on before.
Follow these steps:
Go to TWRP-> Wipe-> Advanced Wipe-> Wipe system,cache data
Go to TWRP-> Install -> Flash STOCK ROM
Go to TWRP-> Install -> Flash Disable_DM-verity_ForceEncrypt.zip
Go to TWRP-> Restore-> Select backup-> ONLY RESTORE DATA (meaning you deselect BOOT and SYSTEM)
Reboot, and if you see the "powered by Android under the Mi Logo, it has worked.
Lastly, when you get into system, it may not work with the previous LOCKSCREEN code you had before.
If this is the case, go to TWRP-> Advanced -> File Manager -> and DELETE locksettings.db
Reboot, and it should let you in.
Click to expand...
Click to collapse
Thank you...its worked
tmptrsn said:
You need to install the stock rom you were on before.
Click to expand...
Click to collapse
THANK YOU, you are a god among men!
Hey hello. I have same issue, thing is I am not able to follow the steps you mentioned. Any help would be very much apreciated!!
Here the errors:
tmptrsn said:
...Follow these steps:
Go to TWRP-> Wipe-> Advanced Wipe-> Wipe system,cache data
Go to TWRP-> Install -> Flash STOCK ROM
Go to TWRP-> Install -> Flash Disable_DM-verity_ForceEncrypt.zip "Updater process ended with ERROR 1 Error installing zip file". Anyway, I kept going and next...
Go to TWRP-> Restore-> Select backup-> ONLY RESTORE DATA (meaning you deselect BOOT and SYSTEM)
I was not able to restore data:"extractTarFork() process ended with error 255" message appear
Click to expand...
Click to collapse
Hi, here's a guide on how install crDroid 7.5 (A11) on Redmi 8
UPDATE: THERE'S 7.5 VERSION AVAIABLE, IF YOU ARE USING 7.4 FOLLOW THIS STEPS TO UPDATE WITHOUT LOSING DATA (NEW ROM IS IN MEGA FOLDER, ):
1- Reboot in recovery
2- Go to Wipe -> Avanced wipe -> wipe dalvik, cache and system
3- Go to Reboot -> Recovery
4- Now follow the normal guide from the flashing of the .img file as system image
VERY IMPORTANT: DON'T FORMAT DATA AFTER FLASHING GSI FIXER OR YOU WILL LOST ALL YOUR DATA
Features:
- All functions of the phone work (face unlock, fingerprint, voLTE, voWIFI, hotspot, bluetooth, fast charge, DT2W, ...)
- Magisk safetynet passed without flash nothing (screenshot at the bottom)
- Permissive Selinux by default (in settings is writing disabled, it's wrong) but you can switch to enforcing with
SelinuxModeChanger app, apk at the bottom
What doesn't work
- Nothing if you use fixes below
Note 1: You may have problems with the brightness or sim calls/sms, there are solutions:
- For brightness: Open settings -> Go in "Phh Treble Settings" -> "Misc Features" -> Scroll until you are in backlight menu -> Select "Force alternative backlight scale" and "Enable auto-brightness overlay" -> then deselect both and reboot
- For sim calls: Open settings -> Go in "Network and internet" -> "Mobile network" -> Tap on "Preferred network type" and select "GSM/WCDMA/LTE" or "Global" (try which is better for you) and then reboot
Note 2: If you fing bugs tell me in comments, maybe I could help you (I'm not the developer of the rom)
IMPORTANT ADVICE:I am not responsible for any damage caused to your device by not following the steps, all the steps were tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - All the files you need are HERE
Note 3: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process, YOU NEED THIS ROM IF YOU WON'T PROBLEMS
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Before continue following steps estract on pc "crdrom-v302-210315-arm64-bvZ.img" from "crdrom-v302-210315-arm64-bvZ.img.xz" and activate USB debug in phone settings
4- Reboot in fastboot and connect the phone to the pc with cable
5- Install on pc minimal adb tool (zip at the bottom), flash the TWRP recovery typing " fastboot flash recovery ", now drag twrp file near the command, then vbmeta typing " fastboot --disable-verity --disable-verification flash vbmeta " and drag vbmeta file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
6- Scroll on the slider at the bottom of the phone screen to access in the TWRP
7- Go to Wipe -> Format data -> type "yes"
8- Go to Reboot -> Recovery
9- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
10- Go to Reboot -> Recovery
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
11- Go to Install -> Select the storage where you have files -> Install img -> select "crdrom-v306-210425-arm64-bvZ.img" (Extracted from the .xz file) -> select "system image" and flash
12- Wait and then go to Reboot -> Recovery
13- Wipe -> Advanced wipe -> select "system" and click on "Repair or change file system" -> Resize system
14- Wait and then go to Reboot -> Recovery
15- Install -> Select the storage where you have files -> Flash "GSI-BUGS-FIXER_11_Q.zip"
16- Wipe -> Format data -> type "yes"
17- Wait and then go to Reboot -> Recovery
18- Install -> Select the storage where you have files -> Flash "BiTGApps-arm64-11.0.0-R19_signed.zip"
19- Wait and then go to Reboot -> System
20- Configure phone and enjoy your new rom
Note 4: I reccomend you to flash magisk after you have configured the rom to avoid problems, I leave you the zip to flash in recovery below
Note 5: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
Thanks for the attenction
-Estatè
Happy that many GSI roms are under develment. I hope this phone will die due to hardware, as there are lots of options in future to keep the software updated.
Anyway, if someone intends to try, following is the link of all GSI Roms.
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
Can i flash vbmeta through recovery
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
Hey
I'm not using crDroid yet, but I've already installed TWRP.
It is advertised that you should flash vbmeta when you're installing TWRP.
I hope I can help you
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Naulels said:
Can i flash vbmeta through recovery
Click to expand...
Click to collapse
No, you have to flash it with ADB like twrp
letouvetpierre said:
Hey !
I wanna try this but I have rooted my phone so here is my question : do I need to remove the root to install this GSI ?
Thx a lot
Click to expand...
Click to collapse
I recommend you to remove it from the magisk app to avoid problems but I think that would be the same
Naulels said:
Volume doesn't work correctly, I cannot increase or decrease the volume. And I plugged my headphone not play through headphone, it play through speaker. Sorry my English
Click to expand...
Click to collapse
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
letouvetpierre said:
Does VoLTE and VoWIFI works ? It's a GSI so I'm not thinking it works...
Click to expand...
Click to collapse
Yes, all work fine becouse you flash the gsi fixer for gsi roms on redmi 8
Estatè Mosconi said:
I haven't this problem, have you flashed the gsi fixer? Did you start the installation from miui 12.0.1? It's really important, anyway, you can try to do again the procedure
Click to expand...
Click to collapse
I have reinstalled and fixed it, thanks
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
letouvetpierre said:
Hey !
I'm so happy !
Everything works on that GSI rom, but I haven't the certification on SafetyNet.
With the covid-tracing app, there is a little problem but it's with all the custom roms so...
Thanks a lot for your guide !
Click to expand...
Click to collapse
Hi, I'm happy for you, for safetynet try the magisk module, I didn't have this problem, anyway, try the rom and than leave a feedback, it could be useful for other people who want to try this rom
I can't get this rom to work correctly. Did the steps as described, but it has SELinux not enforced and Google play isn't certified. Tried multiple times.
EDIT: seems my phone is soft bricked now (Can't install any rom). Going back to xaomi stock to try again.
I tried again and got it to work. The certificate patch throws an error but Google apps are working.
I get an SE Linux not enforcing error. though.
Is there anything I can do about that?
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
ndduc said:
I lost the treble-overlay-xiaomi-redmi8.apk file ,I should problems with the brightness
Click to expand...
Click to collapse
There is the solution for brightness in the guide, you don't need that file
Estatè Mosconi said:
There is the solution for brightness in the guide, you don't need that file
Click to expand...
Click to collapse
thanks you, i fixed
ndduc said:
thanks you, i fixed
Click to expand...
Click to collapse
Ok good
Hi, here's my guide on how install Ancient OS 5.2 (A11) on Redmi 8
What doesn't work
- Bluetooth
- 4g network and VoLTE (Fix below)
- Brightness slider and auto-brightness (Fix below)
Fixes:
- For brightness: Open settings -> Go in "Phh Treble Settings" -> "Misc Features" -> Scroll until you are in backlight menu -> Select "Force alternative backlight scale" and "Enable auto-brightness overlay" -> then deselect both and reboot
- For 4g and VoLTE: Open settings -> Go in "Network and internet" -> "Mobile network" -> Tap on "Preferred network type" and select "LTE" and then reboot
Note 1: If you find a fix for bluetooth describe it in comments, I will update the guide
Note 2: If you fing other bugs tell me in comments, maybe I could help you (I'm not the developer of the rom)
IMPORTANT ADVICE:I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, all the steps were carried out and tested on my personal device and are confirmed, my device is Redmi 8 4/64
Installation Steps - All the files you need are HERE
Note 3: I did the installation coming from Mui 12.0.1 stock (flashed in fastboot with Mi Flash) and there was no problem in the installation process or in the boot process
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Before continue following steps estract on pc "system-arm64-AB-vndklite.img" from "AncientOS-R-Society-v5.2-ARM64_AB_vndklite-Iron-20210227-vanilla.zip" and activate USB debug in phone settings
4- Reboot in fastboot and connect the phone to the pc with cable
5- Install on pc minimal adb tool (zip at the bottom), flash the TWRP recovery typing " fastboot flash recovery ", now drag twrp file near the command, then vbmeta typing " fastboot --disable-verity --disable-verification flash vbmeta " and drag vbmeta file near the command. Finished the procedure type " fastboot reboot " and hold volume + on the phone until you see the recovery screen
6- Scroll on the slider at the bottom of the phone screen to access in the TWRP
7- Go to Wipe -> Format data -> type "yes"
8- Go to Reboot -> Recovery
9- Go to Wipe -> Avanced wipe -> wipe dalvik, data, cache and system
10- Go to Reboot -> Recovery
NOW YOU HAVE TO TRANSFER ALL OTHER FILES OR IN THE INTERNAL STORAGE OF THE PHONE OR IN SD/USB WITH OTG CABLE
11- Go to Install -> Select the storage where you have files -> Install img -> select "system-arm64-AB-vndklite.img" and flash it (Extracted from the zip)
12- Wait and then go to Reboot -> Recovery
13- Wait and then go to Reboot -> Recovery
14- Wipe -> Advanced wipe -> select "system" and click on "Repair or change file system" -> Resize system
15- Wait and then go to Reboot -> Recovery
16- Install -> Select the storage where you have files -> Flash "GSI-BUGS-FIXER_11_Q.zip"
17- Wait and then go to Reboot -> Recovery
18- Install -> Select the storage where you have files -> Flash "open_gapps-arm64-11.0-nano-20210130-TEST.zip"
19- Wait and then go to Reboot -> System
20-Configure phone and enjoy your new rom
Note 4: Rom is pre-rooted, you only need to install magisk apk, file below
Note 5: I reccomend you the best gcam I've found for Redmi 8, everything works except slow motion, link HERE
Thanks for the attenction
-Estatè
zas far as i know bluetooth works on vendor from lineageOS 16 from this forum, there are the same bugs on every rom with original vendor.
Why U use my fixes and manuals without request to me? Your manuals wrong and makes bootloop. Before stupid copy-paste read instructions.
All roms booted without any permissiver. Certification patch retarded and not supported Android 11.
GSI FIXER is rom and vendor-specified.
Number in name = Android in rom
Letter in name = Android in vendor
kulaklığımı algılamıyor
edit: Fixed
Vicuel said:
does not detect my headphone
Click to expand...
Click to collapse
Open termux and type....
su
Then give termux root access....
Then type.....
setprop persist.sys.overlay.devinputjack true
mwaseem851 said:
Open termux and type....
su
Then give termux root access....
Then type.....
setprop persist.sys.overlay.devinputjack true
Click to expand...
Click to collapse
This needs to be done after every reboot?
gattud said:
This needs to be done after every reboot?
Click to expand...
Click to collapse
Nono, only paste it in termux with root access and reboot, then you will solve the problem forever
mwaseem851 said:
Termux'u açın ve .... yazın.
su
Sonra termux root erişimi verin ....
Sonra yazın .....
setprop persist.sys.overlay.devinputjack doğru
Click to expand...
Click to collapse
thanks
Don't use any my GSI-BUGS-FIXERS from XDA. This fixes retarded and no more supported!
Don't say to me in Telegram chat about bugs if you use fixes and instructions from any users of XDA except me.
I used the gsi bugs fixer in Telegram
@Estatè Mosconi If you haven't already I suggest you take a look in your PM inbox.