Related
I was trying to flash Clockwork Recoverylast night, but the links were down the files I needed. So I went to Modaco's site and there is a conversion file to EXT 4 which included Clockwork Recovery. I flashed it using Odin with no problems, and I even saw the Orange recovery screen prior to the phone rebooting. So it looked as if everything worked fine. At this point, it was 4 AM so after the flash it said to be patient and it would take a long time. So I just went to sleep. I woke up this morning to a dead Tab. I figured I would plug it in because maybe the battery ran out.
Plugging it in had no signs of life, so I left it on the charger for a while and eventually I saw the battery and the circular lines that rotate when the battery is charging. The lines however, were not rotating. Basically a "frozen" charge screen. I thought I would leave it on just in case if it was charging and no charge what so ever.
I cannot get into download mode, or recovery. I have also tried plugging in the device and Odin does not recognize it. Can anyone help? thanks
I followed these instructions:
http://droid-den.com/phone-guides/p...co-rom-and-kernel-on-samsung-galaxy-tab-guide
before posting looked through these tips with no success:
http://forum.xda-developers.com/showthread.php?t=888318&page=2
http://forum.xda-developers.com/showthread.php?t=885919
Please post in the proper forum.
I don't see how this has to do with development.
sorry, I figured since I was using the dev thread for info it would go here. Post to general? can a mod move to appropriate portion please? thanks
First post it in general forum.
Second, its not dead, just press volume down and hold power and it will boot into download mode and you can flash it with anything you want.
Thanks Tech, but it will not go into download mode (the sweeping android). It seems as if the battery died, and it is not taking a charge. I have tried holding the V down and power at the same time. Pressing V Down and holding power and all other combos. Cannot get it into DL mode.
Plug in the tab to an outlet and IMMEDIATELY push and hold the power button. My point is, don't let the tab display that battery with the stuck cursor. You want it to boot before that battery icon comes up. You might be using an older version of the kernel that doesn't have the fix for charging when its off.
From the Tab.
www.twitter.com/ayman07
solution
This happened to me. Just plug it in your PC, it will look like nothing is happening, but wait half an hour or more and all of a sudden your pc is going to recognize the usb connects. When this happens right away go to the download mode. Then you can flash whatever you want and fix your tab.
I hope that works for you.
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
try power botton and volume up
xcobrax81 said:
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
Click to expand...
Click to collapse
I think your problem is with the kernel. So thats what you need to flash. you can flash a whole rom that has a kernel. for future reference your battery should be at least 50% before flashing 100% is even safer..
xcobrax81 said:
PHEW! Thanks guys! Any idea what I may be doing wrong? I will retry flashing using Odin. I am using pit P1_20100909.pit
Click to expand...
Click to collapse
When I flashed the modaco kernel I did not use a PIT file. USA ATT tab. It didnt work the first time, and once i flashed it again it worked.
antiochasylum said:
When I flashed the modaco kernel I did not use a PIT file. USA ATT tab. It didnt work the first time, and once i flashed it again it worked.
Click to expand...
Click to collapse
That is what I did for my second turn and it worked like a charm. Thanks for the suggestions. I wanted to try out the CM7 Beta, but I know that Modaco is ext-4 and I think that conflicts with CM7, so I will worry about that some other time. I am done for the year
Again, thank you all for your help and suggestions.
xcobrax81 said:
That is what I did for my second turn and it worked like a charm. Thanks for the suggestions. I wanted to try out the CM7 Beta, but I know that Modaco is ext-4 and I think that conflicts with CM7, so I will worry about that some other time. I am done for the year
Again, thank you all for your help and suggestions.
Click to expand...
Click to collapse
Even a simple process of flashing custom kernel cause such trouble to you, I recommend you to wait till cm7 is stable, in the mean time, just flash other custom rom that use cwm..
I'm really sorry, I searched for solutions but didnt found one that fits my problem.
I'm a total newbie and ****ed up my phone in many ways. I started trying to install something it wasnt suposed to work on my phone (rom destinated to 9000 and stuff). I have a Samsung Galaxy S GT-I9000b (sold to latin amarica) and came from factory with android 2.2.
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Before I try any further I'd like your advices as how to procede regarding my 9000b. Pulling the battery out, putting it in again and holding either vol down or both volumes and either pluging the phone on usb or pressing power allways gives me the same result, the screen with phone exclamation triangle and pc.
So, before I buy a jig cable on ebay that will probably take 3 weeks to get here (Brasil) is there anything else I can try?
Please help me, I'm desperate and I dont want to take it to assistence, it would cost me much money and ruin all my courage in trying to use Roms.
Thanks alot and sorry for the bad english.
so did you have the 3 button combination before this happened ??
have you tried to charge the phone whilst powered off, then when the phone gets hot, try download mode then ? sometimes this works, as heat can help download mode work.
another thing that has worked for SOME people, is leaving the battery out for 10mins, doing the 3 button combo, and whilst holding the 3 buttons, insert the battery.
you could try these and see what happens,
And 3 weeks delivery for the JIG is a long time, couldnt you make one in less that 3 weeks.
If you can't get into download mode, you are screwed until you get your hands on a jig, simple as that. Just wait. Patience is a virtue.
Thanks in advance for the quick reply guys, I ordered the jig, estimated 20 days, usualy it takes the same amount from the central postal ofice to my home since they allways restrict packages from hong kong. I'm considering making one but I'm a total denial in eletronics.
I was able to get to download mode before this problem yes. I would just hold down vol and center key and then power. Now even when I plug it in to charge I get the screen with the exclamation.
Any more sugestions?
no other suggestions other than whats listed above
looks like you will have to wait for the JIG to arrive.
Loner-phone here you come lol
Then I have a couple of questions.
1) Since I plut it in directly on the power and still recive the same screen is the phone still charging? Or once the battery is over I'm ****ed up twice?
2) Is there any chance that the jig wont work or I in some way ****ed up my I-9000b permanently?
3) After I make/get a jig how should I procede? I heard about one-click odin, but apears that its for another model of phone, and since I got on all this trouble exactly for trying to do things to my phone that were suposed to be only for another model, I'm kind of lost.
Inputs?
Thank you all for already awnsering my questions.
1) the system is corrupted so the charging indicator will be too - thus leading to Phone ! PC image - this is the only image the phone can now produce
2) The 'JIG' has a 100% success rate - providing that the motherboard is not fried - which it isnt as it still shows an image
3) the jig is just a modified USB, just plug it into the phone whilst powered off and download mode will appear, and then you just attach your genuine USB cable and flash stock ROM thru ODIN.
azzledazzle Thank you very much for your patience, but since I`m a total newbie to all this, some of your awnsers I didnt understood fully, do you care explain me better?
Regarding question 1) The power indicator is corrupted, ok. But this means if my battery die out of usage it wont charge again or just that the indicator wont show that is charging but the battery actualy is charging?
and for question 3) Is ther any tutorial directed to I-9000 on how to use odin to flash a stock ROM ? like baby steps? After all that I'm even afraid to turn the phone on, so I would like to know exactly what to do. I`m cosindering asking someone with technical skills to help me on a home made jig.
oh im sorry, i get carried away sometimes.
1) i assume the battery will be charging yes. only the phone will not be able to show this due to the corruption.
2) when you have made / bought a JIG (link below) you ideally want to flash a Stock ROM, you can get this from samfirmware (link below) and also on this site is a tutorial on how to use ODIN, its fairly easy if you just read the instructions provided.
JIG: http://forum.xda-developers.com/showthread.php?t=819551&page=3
Firmwares : www.samfirmware.com
ODIN download and guide : http://forum.xda-developers.com/showthread.php?t=846913
Its a miracle, somehow I managed to get into download mode. But I'm still a bit insecure
Here is the deal, I dowloaded a .tar file that alledgedly from my carrier and for my country. The tar is named JPA_JP3_JPA.
Inside the file there are cache.rfs factoryfs.rfs modem.bin param.lfs zimage
But what should I put where on ODIN if I only have PIT PDA PHONE and CSC?
And how can I discover if I should use pit 512 or 803?
Should I consider a master clear setting?
the file you downloaded is a full firmware compressed into 1 .tar file.
so in odin load the .tar file into PDA section and THATS IT !!
DO NOT USE PIT WITH THIS FILE.
press start and enjoy
PS do a factory reset after the flash
vongikking said:
I'm now stuck with the black screen of death, no matter what I do I get this screen. It hapened after I tryied to install unsucessfully the original rom of the phone and odin presented me with an error.
Click to expand...
Click to collapse
Hello all!
I've got my hands on a GT-I9000 today.
It's got 2.3.3 Android on it.
Wanting to install CM7, I was first of all trying to root it.
I'm on Mac OS X 10.6.8, thus I downloaded heimdall-frontend and the "Hardcore's SpeedMod kernel with ClockworkMod Recovery".
When I put my phone into DL Mode and connect it to my Mac, I can't write the image to it.
Heimdall is failing with "Failed to receive device info response!"
What do you ppl suggest me to do now?
Thanks,
F.
Try to flash with Windows!
Sent from hell to take your soul
Lunchbox115 said:
Try to flash with Windows!
Sent from hell to take your soul
Click to expand...
Click to collapse
Indeed I now managed to get Windows XP PC.
one trouble still remains: after rooting the device remains in an infinite reboot loop!!!
It only stops when WiFi is disabled.
Any help bout this?
Or at least any means to get back to a factory ROM?
I got 2.3.3 before flashing...
Thanks!
Try to flash the nightly again, should solve the bootloop-issue.
Or you can wipe cache/dalvik cache, this helped me too.
Lunchbox115 said:
Try to flash the nightly again, should solve the bootloop-issue.
Click to expand...
Click to collapse
Which nightly do you intend me to re-flash?
Or you can wipe cache/dalvik cache, this helped me too.
Click to expand...
Click to collapse
How do I achieve these two things?
Thanks,
F.
Just take the latest nightly. To wipe the cache/dalvik cache you have to boot into recovery (hold volume UP + home button + power button.
Sent from hell to take your soul
I was running CM7 nightly builds. I was attempting to switch to the stable CM7 build with an ODIN restore. I couldn't get ODIN to recognize my phone, and a forum thread said to try re-installing the update.zip file from the recovery boot. It got hung up trying to do that and upon reboot, it is now stuck on the startup screen. Can't get to recovery, can't do anything. Any thoughts?
Help is GREATLY appreciated.
Thanks!
have you pulled battery and started again? tried button combos? have you used odin since installing cm7? i believe it needs different drivers..... more info will get you more help. more reading will keep you out of trouble (mostly) i've never used cm7 so i can't help that much...
I have tried pulling the battery, running the battery to dead and then putting it on the charger, all the button combos.
I have not tried ODIN but thats because ODIN needs to be in download mode and I cant get into download mode. The only thing I can get to is the AT&T World Phone screen with the white background. I have done some google searching about getting stuck on the boot screen but none of the threads I have found have seemed to mot relate to my exact problem. I am currently looking into if this is the kind of problem that a jig would fix.
definitely sounds like a job for a jig.. it will force it into d/l mode as long as the bootloaders are not corrupted..... best of luck
if the bootloaders are corrupted, is there anything to do or is the phone just finished?
Jtag/unbrickable mod
I had the same loop yesterday doing something else, but i had the ATT boot loop and no button combos worked to get into DL mode. So I tried pulling the battery, then holding vol+/vol-, putting battery back in, and then plugging in usb cable. Went to DL mode. If that doesn't work, I'm sure a jig would.
fuloplori said:
Jtag/unbrickable mod
Click to expand...
Click to collapse
Jtag should only be used for hard bricked phones. Since there is a sign of life, he can probably recover from this without the need of jtag.
Use a jig. It's the easiest way to get into dl mode. If you don't have one, you can make a crude one that will work until you can get a proper one ordered.
beast534 said:
I had the same loop yesterday doing something else, but i had the ATT boot loop and no button combos worked to get into DL mode. So I tried pulling the battery, then holding vol+/vol-, putting battery back in, and then plugging in usb cable. Went to DL mode. If that doesn't work, I'm sure a jig would.
Click to expand...
Click to collapse
That got it into download mode! I am going to try and ODIN restore and see what happens. Thanks!
ODIN Restore worked! I had to restart it a couple of times but I am back on stock. Now to get the stable CM7 becuase I don't think I can handle stock ROM again...
cdenney said:
ODIN Restore worked! I had to restart it a couple of times but I am back on stock. Now to get the stable CM7 becuase I don't think I can handle stock ROM again...
Click to expand...
Click to collapse
Great! Glad I could help
Hi,
I have done a lot of reading and searching, and I think I understand most of the basic pieces of what I am trying to do and how to do it. Let me explain.
Ultimately, I want to be able to install custom roms to my captivate.
Firmware: 2.2
Kernel: 2.6.32.9
Build: FROYO.UCKB1
I installed rom manager, but I see that with my hardware, I cannot install cwm recovery. It seems I need to downgrade my kernel using odin. Problem is, although I found the thread listing all of the kernels for download in zip format, I have no clue which one to use.
I found the instructions on how to reboot into cwm recovery, but without the new kernel, I cannot do it, at least that's what I gather.
Can you guys help me here? I know I am on the right track, but don't know what to do to go any farther. Also, I cannot get into recovery mode buy clicking the buttons. It seems I must now use adb. All I want to do at this point is reboot into cwm mode. Can that be so difficult.
Well, this is my first post. Thanks to all who reply.
Viper
3e recovery. Look in the stickies to fix that. OR flash another kernel (like Cog 4.x.x kernel) and flash a rom.
+1 to the above. Personally when flashing a custom ROM I just always start with JF6, the flash the green CWM update.zip file followed by the ROM, or if it's got an initial-kernel like many ROM's call for now days.
Quick stupid question...
Does the sim card need to be out to do this, or any of the other things I have been trying?
PghPittViper said:
Quick stupid question...
Does the sim card need to be out to do this, or any of the other things I have been trying?
Click to expand...
Click to collapse
It does not matter. The whole (remove SDCARD and SIM steps) in my opinion have always been false info. The only reason I'd remove anything would be the SDCARD if using a recovery that's untested to ensure it's not formatted or something like that.
error?
No matter what I try flashing with odin, I get this message:
<OSM> All threads completed. (succeed 0 / failed 1)
This indicates that the process failed. What gives?
Re-install your drivers. Then ensure the ODIN is open BEFORE connecting your phone in download mode. You can get the latest drivers in a package I made with ODIN here:
www.mediafire.com/?eyr42m5ilf03566
Edit: Also only use a genuine OEM cable when flashing. There are two many issues with non-oem cables and the usb data transfer they provide.
Need big time help now!!!!!!!!!!!!!! Possible Brick!!!
Now i have been playing with flashing roms. Now I have a real problem.
I flashed darky 10.2 i believe and now I am in a boot loop. It cycles between the white att screen and a colored pixelated screen.
I have been reading and researching for hours now. Present time 3:15 am. Research tells me that the cappy is pretty much un-brickable.
I KNOW I have to get into either download mode or recovery mode. I cannot do either.
I have researched this subject exhaustively, but my brain is fried now, and I work at 6:00 and need my phone.
What to do????
I emplore anybody up at this time to help.
TIA
PghPittViper said:
Now i have been playing with flashing roms. Now I have a real problem.
I flashed darky 10.2 i believe and now I am in a boot loop. It cycles between the white att screen and a colored pixelated screen.
I have been reading and researching for hours now. Present time 3:15 am. Research tells me that the cappy is pretty much un-brickable.
I KNOW I have to get into either download mode or recovery mode. I cannot do either.
I have researched this subject exhaustively, but my brain is fried now, and I work at 6:00 and need my phone.
What to do????
I emplore anybody up at this time to help.
TIA
Click to expand...
Click to collapse
What ROM were you coming from? Did you try all the 3 button combos? or battery pull/Vol+/- then plug in usb? Next best thing is a Homemade/bought Jig.
PghPittViper said:
What to do????
I emplore anybody up at this time to help.
TIA
Click to expand...
Click to collapse
Did you flash gingerbread bootloaders before flashing the ROM?
I am not amused by your phones performance
Did not flash gingerbread...
I apologize, my intent was not to amuse.
How now can I flash gingerbread if the phone wont stay powered on?
I ran home during my work break to check my replies.
Because I didn't flash gingerbread, I presume I was hasty in flashing darky becuause it seemed so great, is it possible to resurrect this phone?
I am feeling pretty discouraged.
Thanks and please continue to help.
As long as the phone shows any type of life its not Hardbricked and can be recovered with key combos or a Jig. Your fine. Get in to download mode and flash a clean stock and start over.
Entering recovery mode in my situation.
I am currently trying to hold the 2 button volume control and the power key.
The phone comes on to the att white screen, then goes black, then comes back on, etc...
I am very worried.
When I plug into the usb, it will connect to pc, then disconnect, then keep repeating this. I read that kies has an emergency recovery feature. But,, I can't connect to kies. Odin recognizes a port, but kies just says to connect your phone.
Any advice?
PghPittViper said:
I apologize, my intent was not to amuse.
How now can I flash gingerbread if the phone wont stay powered on?
I ran home during my work break to check my replies.
Because I didn't flash gingerbread, I presume I was hasty in flashing darky becuause it seemed so great, is it possible to resurrect this phone?
I am feeling pretty discouraged.
Thanks and please continue to help.
Click to expand...
Click to collapse
You don't need gingerbread BL for Darky 10.2. I've flashed Darky 10.2 before, his directions were pretty clear. I moved onto Fasty since his updates stopped. I suggest reading the stickies for making jigs or buying them as well. You can do it! & Good luck.
^what he said. You can try and taking out ur batter open odin, connect your phone hold Vol up and down insert battery. If that doesn't work you need a jig. Not hard to make, takes a little time though (if you peel a cheap cable for the plug that is)
HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
roni2915 said:
HELP!!!
Im stuck on boot logo and I cannot flash anything on PC Odin. And I cannot access Recovery Mode (Neither CWM or system recovery). I can only go into Download Mode.
I was on CheckRom NoteHD and I used the kitchen app to download franco kernel and one of the mods (Use camera flash below 15% to be precise) and as soon as I installed, it didn't let me boot back into Checkrom!!! And Now im stuck on boot logo no matter how hard I try. I did try flashing the wipe ROM (Pre-rooted Open Europe 2.3.6 LC1), I also tried flashing the CF-Root file but still no luck. PC Odin says failed in between the process!!
Please Help me guys.. I don't know what really went wrong as I have installed stuff from the KitchenPro App before.
What can I do now?
Thanks
Click to expand...
Click to collapse
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
gee2012 said:
First this:Turn off the device and pull the battery, wait for 30 seconds and try to get in recovery mode, if that works reflash CheckRom. If that doesn`t work pull the battery again and get in downloadmode and connect to the pc and see if Odin recognizes the phone. If it does flash any stock rom.
Click to expand...
Click to collapse
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
There are threads about reviving recovery i think on xda, haven`t needed them so far but look around and you will find them. If you can`t restore recovery or downloadmode then it`s off to the shop i guess
Does Odin recognize your phone, what exactly goes wrong when flashing with Odin?
roni2915 said:
I tried the exact same thing you mentioned and no, it doesn't go into recovery mode. and yes, it does go into download mode but it fails to flash. I tried 2-3 different firmware versions of 2.3.6, 4.0.3 and I'm pretty sure the downloaded files aren't corrupt!! I don't know what to do...
The only thing working is getting to download mode but then thats no point since I can't flash any ROM.
Click to expand...
Click to collapse
i have the same situation like you before ...try this ..http://forum.xda-developers.com/showthread.php?t=1667886 i works for me..hope it works for you too...
"Battery Too Low, Can't Download"
Now there's another problem.
Not only I Can't flash anything, I can't even get to Download Mode because the battery is low.
When I press the Vol Down + Power + Home key, I get "Low Battery, Can't Download" in red font.
I left my phone on charge through the AC port and I had no idea it wouldn't charge. The only thing was that my phone was exteremly hot but still with zero battery. I even tried plugging the phone through the USB cable but still no luck.
I removed battery for few minutes upto 30 mins and put it back in and plugged in the charger but all I see is the empty battery symbol keeps flashing every 5 seconds.
Is there any way I can charge my battery and get back to download mode so I could try flashing the stock kernel to get past the boot screen? I even tried plugging in the USB jig that I used with my SGSII previously, but it was of no use as well.
Please Help!!!
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
ac-milan said:
your only option is to use a universal charger external, or borrow another note to put your battery in.
once your battery is full you can carry on the previous steps
good luck
Click to expand...
Click to collapse
i will probably take it to best buy because i dunt know anyone that owns a note.. only I'm the cool one
hopefully i can charge my battery at best buy and then go on with the process!!
Hey,
I managed to buy an external charger and I was able to go to Download Mode again.
After that I tried to flash stock kernel (stockKernelXXLA4.tar) And Odin said "Pass".
After that I was stuck on the Samsung Galaxy Note GT-N7000 Logo again.
I'm not sure what to do now!!
Please help.
Is there anything else that I could flash?
Even though I flashed a stock kernel, I still see a yellow exclamation mark..
PLEASE HELP, I NEED MY NOTE TO COME BACK TO LIFE!
Sorted this mess out!!!
I flashed "N7000JPLPD_N7000OJPLP7_N7000XXLPT_HOME.tar" And the phone now works!!!
Stock kernels didn't do the work for me, but the official ICS release did.
Thanks to all that contributed in the thread.
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
antique_sonic said:
is the new release can do ?
i'm using the LPT / LQ2, and the flashing process very long like stuck in firmware upgrade process. The bar just like never move for half our alrd.
how long you take for yours ?
Click to expand...
Click to collapse
it only took me 5-8 minutes...