WHENEVER I RESET THE MOBILE THE FOLLOWING MESSAGE APPEARS:- "THE FILE 'BOOT' CANNOT BE OPENED. EITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND. IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THE FILE."
WHEN I PRESS OK THEN ONLY THIS MESSAGE GOES AWAY AND EVERYTHING IS NORMAL . I HAVE ALSO HARD RESET MY MOBILE.
I ran into an error similar to that when I uninstalled a program that used to start at bootup. If you uninstalled a program recently that may have done it.
Did this just start happening, or has it been a while?
What changed to make it happen?
Is this with a stock ROM or did you flash another one?
Actually it all started when i uninstalled play pad, and after that windows media player did not play any sonud file. Then i had to hard reset my mobile. After that hard reset my mobile always show this message
Is this all using the stock ROM?
yes
yes, this problem is while using the original factory rom
Try running task 23 then flashing a stock ROM
Thanks for reply!!!!
Related
Is there a way to format the PDA and reinstall a ROM. My PH20B1 is started to freeze after a ROM is installed and at Complete on the Setup for minutes. I end up just soft-resting cause after mins past its not doing anything....Is there a way to fix that???
Isn't it supposed to be like that? You're supposed to reset after the ROM upgrade shows 100% complete.
I think I understand the problem you have from the limited information supplied.
You have rebooted to a white screen after a failed rom upgrade, correct?
If so, just disconnect your device from the PC, hold power+record buttons, then prod the reset hole with your stylus. You will see "Serial v2.xx" where "xx" can vary. Now attach the phone to your PC (device now shows "USB" instead of "serial").
Next, kill off all activesync processes on the PC (ctrl-alt-del to enter task manager, then end task on "rapimgr.exe", "wcescomm.exe", "wcesmgr.exe").
Now that the device is attached and activesync is killed, start the ROM upgrader application to update the phone ROM.
After successful upgrade, it often helps to reboot the PC as well as the phone, as activesync does not always recover well from having its processes killed.
Im saying that My PDA is starting to freeze. Even after running, its starting to freeze up and I have to soft reset it. I am able to install a ROM on it however at the end of installing the ROM where the screens says COMPLETE...Tap to continue ro begin using your device...and its starts the ROM....As soon as I tap the screen in the middle of starting WM5 it freezes... Ive even downgrade to Wm2oo3SE and it still freezes. But after soft resest there was a message about "system data is corrupted, System will erase all data to fix this error! Yes or No to fix"....Can that be fix or am I able to re-format the PDA hdd and reinstall WM2oo3SE or WM5?
Hi again,
This is a guess, so treat it as such, but I suspect that something in your extended ROM could be causing the problem. On first boot after reflash, a file "autorun.exe" is executed from the extended ROM, and this will normally install a bunch of CAB files.
If something in your extended ROM was corrupt or otherwise not correct, it could cause a lockup on first boot - immediately after calibrating the screen, setting the timezone etc, just as you describe.
The safest thing to do is to revert to the device's complete set of original ROMs, as found in this table :-
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The original ROM-set will restore the main ROM, extended ROM and radio ROM to the defaults.
If the problem is fixed afterwards, and you still feel brave enough to upgrade to WM5, then first repartition your device so that the extended ROM is empty. Instructions on how to do this from within WM2003 are found here :-
http://forum.xda-developers.com/viewtopic.php?t=50628
Figured Out A Solution
I figured out the problem and Im not sure if others have experienced this problem or not. Even if you dont created an extended rom on your Blue Angel when changing from rom to rom, if your screen tends to freezes after saying "tap on your screen to begin using your device" you will have to run the DOC repartitioning tool in the Prepartion Folder of some ROMS. Once running the program as the directions tells you and preform a reset even a hard reset on your device, everything will run fine without freezing.
I purchased a nook color the other day and successfully rooted and used it for a few days. My youtube would not open so I reinstalled, it ran once and then failed to open again so I gave up on that issue. In reading about youtube app I found that you could get the new market app. I could not get it to install...and in trying multiple things I accidentally deleted my original market app.
I could not get it back so I whiped my nook color and reflashed autonooter. I got all my apps back but I get a connection error when trying to access the market now. I added my account via youtube which again opened once to allow me to sign in and now fails to open.
So I decided to try to reset it back to the way it was out of the box and start from scratch.
I tried the adb 8x reboot method.....it just reboots the nook as it normally would. No bootloader or install screen.
I tried the button method. It works once or twice then it goes through the entire boot. I did it for a half hour and used counts to verify I was doing the process correctly and no matter what I did I could get it to fail boot once and one the second or third it would always bypass and go through with boot even with my finger on the button.
I also am running windows 7 64bit and I cannot get my computer to see "nook" in the device manager for more than a second and it auto installs as a storage device. I've tried to "uninstall" the different devices and last night I was able to catch the "nook" in time to install usb drivers manually but when I reset the nook today my PC no longer see's it again. I was wondering if there is an easier way to install the adb device.
Thanks
UPDATE: Somehow the ADB way to reflash worked the second time I tried it. I also changed some settings in the development menu to fix the device manager issue. I'll update again if I can use youtube and the market.
I don't know what to tell you about everything else but for ADB I would highly recommend adbWireless... it works great on my NC and I never had to install any drivers.
To reset I used the button and counted slow to 15 after the screen gose off each time it worked for me. Good luck
I have a rooted Gt-P1000 it crashed and now right from factory reset it keeps saying process android.process.acore has stopped unexpectedly. I can get onto the internet through going back through the initial set up screen after reset. I can also download something to get a download failed to get to my files. All system files fail to restore.
I have no working menu settings and process android fault constantly appears. I also get process.com.android.setupwizard has unexpectedly stopped. I have searched the internet and found no answers.
I went and bought a new pad only to find z4root does not work any more. And oneclick is an unopenable file!
Hence i have an unrooted pad that is as much use as a chocolate fireguard and a rooted one that is corrupt. The unrooted one is crap as i work in saudi and need to run market enabler, which wont run here unless routed. Please can someone give me an UPTODATE METHOD OF ROOTING, TELL ME HOW TO FIX FAULT, THANX!
Do a hard reset: switch off the tab and boot into recovery by holding volume up and power button. choose factory reset.
NOOB rooting guide: http://forum.xda-developers.com/showthread.php?t=812367
Already done loads of resets, as above - after reset i still have all the above problems!
Hello!
I'm a newcomer in this forum
I had this problem which just occurred this morning. My phone is a Samsung Galaxy Pocket GT-S5300. I had decided to factory data reset my phone after i had updated its firmware via kies. After the reset (of course I have expected that all my files will be wiped out and that I'll be starting back to scratch), i was asked to set up a google account. So i just signed in but an odd thing happened. My account won't log in and the screen shows this one- Can’t Establish a Reliable Data Connection to the Server. I can't even update the software or create a samsung account. The worst thing is that when i activate the phone for sync or turn on wifi, i always get this message "the application google services framework has stopped unexpectedly." I am so frustrated with what's happening with my phone and so I decided to surf the net for possible solutions. I have undertaken the following solutions but nothing works
1.) clear the cache (on recovery mode)
2.) factory data reset
3.) turning sync off, accessing the manage application>all directory and clearing the cache for contacts, contacts storage, calendar, calendar storage, internet, google services or applications
4.) rebooting the device
I hope someone can answer or possibly give some solutions to this concern of mine
God Bless!
reflash your firmware through odin
reflash your firmware through odin
HELP
I bricked mine and it only boot and display android logo and a box looking like a trash with an arrow pointing out the box. what do I do so when I use key combinations it can boot to recovery mode?
thanks in advance
About the Google services I had the same problem on my brother's HTC EVO 3D. After I reflashed his ROM(Synergy) the problem still persisted so I cleared everything that was in recovery. I reflashed the Rom again and the problem was solved.
Sent from my PC36100
icant restore my galaxy pocket firmware HELp me please
ive been reflashing my sgp and when im open it the samsung logo appears and it will vibrates two times What can ido help me please ...
i cant erased my gt-s5302 after hard reset
hello guys
I format my mobile via odin after that i restart it but my old data not erase... after that I do factory reset also not erase my data.. pls help
Delete the hosts file
Sent from my espresso3g using XDA Labs
So I bought a ME70CX yesterday, and the first thing I did was root & debloat it. Unfortunately I removed Google Play services while at it, and discovered Play Store wouldn't work. So I restored to factory settings to recover the apps, and now I am stuck in the Setup Wizard, at the Wi-Fi part. When choosing a Wi-Fi to connect to, the tablet first tries to connect for 20-30 seconds before crashing, which restarts the wizard from the beginning. I have tried flashing with firmware, but it returns the error message "No detect APD image file. skip!" Followed by "Can't find image file". This causes the flash to fail.
So basically what I am looking for is an answer to the following questions:
Can I repair it? Can I uninstall the Setup in order to bypass it, or bypass it any other way?
Or a guide to flash firmware for this particular model.
Thanks