[Q] Q about firefly 3.0 the 3G/H band on top - Captivate Themes and Apps

For anyone that has firefly rom, ive noticed on the rop where the data is, its got "H" With 2 arrows. What does that mean? I'm not seeing the 3G logo any more...but when I DO it flashes for half a second. Any info? Thanks.

I believe the H stands for HSUPA High Speed Uplink Packet Access. Basically it has faster download/upload speeds than 3G. I believe this is correct but if I am wrong feel free to correct me.

That's right. H is faster than 3g but uses a little more battery perhaps. H

It will go to 3g when it can't connect to H, and to edge when it can't get to 3g.

Related

Connecting to UMTS/HSDPA using AT&T

I have noticed that when I am connected to the fast cellular internet the sign constantly switches between 3G to H. Like every 15 secondes.
It's not that the connection is dropping it's just it is always changes from 3G to H. I am on At&T and would like to know if it happenes to someone else.
As I read, At&T suppose to have an HSDPA and since I am in big cities like Chicago and Washington DC, if there is HSDPA it should exists in these cities.
So?? anyone using AT&T + KAISER knows what I am talking about?
should be worried?
i see this behavior all the time with my Kaiser, Trinity and Treo and never worry about it... most often the i'll see the "H" symbol when i'm tethering or downloading a file from a website or i'll see the "3G" or "E" if i'm in an area of town that doesn't have a strong signal... i don't worry about this behavior unless it affects what i'm doing, e.g., lose my internet sharing connection. just my 2 cents...
cortezzi said:
i see this behavior all the time with my Kaiser, Trinity and Treo and never worry about it... most often the i'll see the "H" symbol when i'm tethering or downloading a file from a website or i'll see the "3G" or "E" if i'm in an area of town that doesn't have a strong signal... i don't worry about this behavior unless it affects what i'm doing, e.g., lose my internet sharing connection. just my 2 cents...
Click to expand...
Click to collapse
Thank u for your fast reply. I know sometimes the signal changes to E or even G if there is no high speed connection around but it seems that the H and 3G just changes every 15-20 seconds in areas with high speed connection. does it also happen to you? or anybody else?
alonmalka1 said:
I have noticed that when I am connected to the fast cellular internet the sign constantly switches between 3G to H. Like every 15 secondes.
It's not that the connection is dropping it's just it is always changes from 3G to H. I am on At&T and would like to know if it happenes to someone else.
As I read, At&T suppose to have an HSDPA and since I am in big cities like Chicago and Washington DC, if there is HSDPA it should exists in these cities.
So?? anyone using AT&T + KAISER knows what I am talking about?
should be worried?
Click to expand...
Click to collapse
I actually consider you lucky. At work in Menlo Park, Ca. I rarely get a 3G or an H... But I spent a couple of weeks going to SF every day and there I saw behavior very much like you describe. For me it seemed to want to switch from 3G to H as I was doing some sort of access like e-mail read or a download. Though that is probably just anecdotal as I didn't really make a study of it; just something I noted.
Cheers.
i have the 3g/H switch happening constantly as well. could this connection issue have anything to do with the sms issues (issue being sms works randomly), or totally unrelated?
Yep...this happens to me too.
alonmalka1 said:
I have noticed that when I am connected to the fast cellular internet the sign constantly switches between 3G to H. Like every 15 secondes. It's not that the connection is dropping it's just it is always changes from 3G to H. I am on At&T and would like to know if it happenes to someone else...
Click to expand...
Click to collapse
I'm in the Chicago-North Suburb area and I see it change all the time too. I get a lot of HSDPA connections. From my understanding, this is a good thing!
Though I'm by no means an expert on HSDPA, 3G, UMTS or any of these, it's my understanding that HSDPA will give you data bursts of up to 5 times the connection speed of 3G/UMTS.
TEC
What it means on my 8525
Hi Guys,
Don't worry, you are not having signal quality or connection issues. On my 8525 (Hermes) the switch to H from 3G simply means the phone is using the data connection at the H (HSDPA) speeds. It shows 3G when data is not being transferred.
Yup. It's sort of like a combination power/hard drive light on a computer. When the "H" lights up, data is being read and written over the high speed network. The "3G" means the high speed network is available, your just not sending or recieving at the moment. At the slower EDGE speeds, the "E" is just a power light, showing the network is available, but no indication when you are sending a receiving data over it.
Someone correct me if I'm totally wrong, but here are my thoughts:
The H would be displayed when the device is accessing HSDPA or HSUPA. The D stands for download and the U stands for upload, right? But AT&T only has HSDPA right now, and not HSUPA. So when you're in an HSDPA area and browsing the web or sending and receiving emails, when the device is receiving information (downloading), it's on HSDPA and the "H" is displayed. But then when it needs to send information (uploading), since there is no HSUPA signal it switches to 3G and the "3G" is displayed. Hence the constant switching on the display as the device sends and receives data.
Someone please give me a gold star, or tell me I have no idea what I'm talking about!
Here's a GOLD STAR!!
KCMatt said:
The H would be displayed when the device is accessing HSDPA or HSUPA. The D stands for download and the U stands for upload, right? But AT&T only has HSDPA right now, and not HSUPA. So when you're in an HSDPA area and browsing the web or sending and receiving emails, when the device is receiving information (downloading), it's on HSDPA and the "H" is displayed. But then when it needs to send information (uploading), since there is no HSUPA signal it switches to 3G and the "3G" is displayed. Hence the constant switching on the display as the device sends and receives data. Someone please give me a gold star, or tell me I have no idea what I'm talking about!
Click to expand...
Click to collapse
Not that I'm an expert either but THIS WOULD EXPLAIN IT!
Thanks
TEC
If you see the H then you are using HSDPA, if you see the 3G icon then you are using UMTS. The difference is speed and the fact that if you see the H icon it means you can use voice and data at the same time.
I can stream live TV from my Media Center using WebGuide (free) and as long as I have the H icon I can talk on the phone at the same time I'm watching TV but if it switches to 3G I loose my data connection until I hang up the phone.
Mine mostly stays on H but swithces to 3G when the HSDPA signal is lost. HSDPA isn't avalible every where that 3G UTMS is.
Also HSDPA is 3.5G and UMTS is 3G. Meaning with UMTS you can get downloads of 384 kbps to 768 kbps and with HSDPA you can get from 768 kbps to 1mbps.
This is how it is supposed to work kids...
The H only shows up when you are using HSDPA. HSDPA would kill your battery in no time if it stayed connected all the time. your phone is smart enough to only use HSDPA when it is actually sending/receiving data. Think of it as a power saving feature.
I'm in cleveland and i just see an "H" all the time... FWIW...
Jason Lee said:
your phone is smart enough to only use HSDPA when it is actually sending/receiving data.
Click to expand...
Click to collapse
But it only uses HSDPA when it's RECEIVING data, not SENDING. That's what HSUPA would be for (if AT&T had it yet). Right?
High Speed DOWNLINK Packet Access
High Speed UPLINK Packet Acess
KCMatt said:
But it only uses HSDPA when it's RECEIVING data, not SENDING. That's what HSUPA would be for (if AT&T had it yet). Right?
High Speed DOWNLINK Packet Access
High Speed UPLINK Packet Acess
Click to expand...
Click to collapse
That is correct. HSUPA should be coming soon according to Engadget: HSUPA
KCMatt said:
Someone correct me if I'm totally wrong, but here are my thoughts:
The H would be displayed when the device is accessing HSDPA or HSUPA. The D stands for download and the U stands for upload, right? But AT&T only has HSDPA right now, and not HSUPA. So when you're in an HSDPA area and browsing the web or sending and receiving emails, when the device is receiving information (downloading), it's on HSDPA and the "H" is displayed. But then when it needs to send information (uploading), since there is no HSUPA signal it switches to 3G and the "3G" is displayed. Hence the constant switching on the display as the device sends and receives data.
Someone please give me a gold star, or tell me I have no idea what I'm talking about!
Click to expand...
Click to collapse
Perfect.!! Downlink = Downloading (HSDPA).. Upload data by 3G as AT&T is not supporting Uplink = Uploading (HSUPA)... smart one..
I'm not sure it is that simple...
I live in Jacksonville an i neverget an "H" except when i used shap's rom on my 8525; however, i get speeds from 600 to 980, so is this extremely fast UMTS, or is Cingular just inconsistant with their labels?
exzist78 said:
I live in Jacksonville an i neverget an "H" except when i used shap's rom on my 8525; however, i get speeds from 600 to 980, so is this extremely fast UMTS, or is Cingular just inconsistant with their labels?
Click to expand...
Click to collapse
I also live in Jacksonville and found with the Tilt that I was only seeing the
3G icon and never the H icon until I installed KaiserTweak and set the HSPA option to enabled. Now I get the H icon but only during the data connection being active (e.g., sending a URL request and receiving the page load). The icon then turns to 3G when the Tilt sits "inactive."
Also just because you don't see the H for HSDPA doesn't mean its not working unless the REGISTY has the correct setting you will not get the H icon. the place is HKLM>Drivers>RIL>EnableHSDPAIcon = 1 (sometimes default is 0 which means you won't see the H icon)
Since my last posts on this topic, I now have my Tilt!
I am confused- why would AT&T not enable the "H" icon? If you are using HSDPA (and soon HSUPA), wouldn't they want you to know it?
Maybe they are afraid it will confuse people. They just want to market "3G" and people to understand it and see that icon, whether they are on UMTS or HSDPA/HSUPA?

Problem with HSDPA

Ive noticed that the H symbol doesnt actually show hsdap availability. For example, when I have 3g signal but there is no data transfering I have a 3g symbol with arrow next to it, as soon as i start transfering data it changes to an H even if im connected to a 3g cell with no hsdpa functionality, (confirmed by a speed test).
Any ideas how to actually show whether i am in HDSPA coverage or not?
Alexfoti
Why do you say that your not in a HSDPA area or signal range? Just because your not getting really fast speeds? Most HSDPA speeds are from 300Kbs-1.5Mbs when that little 3G changes to H your are most deffen... getting HSDPA
well ive done speed tests when it says the H and it varies between 200 and 300 sometimes.
Is that normal?
Yes just because the Max Download speed is 3.6Mb that does not mean you will come any place close to that. there are so many factors that will throw the download speeds off hell the wind blowing from the west and not east the window being closed and not open you get the Idea
I've been confused by this as well and while speed is clearly better with the "H" on than with 3G, I never go above 450kbps which is a bit slow, 3G tops out at 340kbpw. I wonder how efficient the Qualcomm chip is for 3G+, I hear that Samsung i600 users are getting speeds of 600/700 in the same area.

HSDPA icon stuck!

I turned on my Tilt this morning and where the 3G icon used to be it is now a H icon all the time even if I am not connected to the network or downloading data. I have tried disabling HSDPA and reenabling it, but that hasn't worked. Disabling and reenabling the icon itself also doesn't get rid of the problem. I haven't installed anything. Does anyone know how to fix this or is this some kind of newly discovered radio bug?
Running on AT&T network.
Thanks
dont complain.. ur not stuck in H u now have full blown H in the area.. my girls 85 has full H now and so does my tilt
does this mean I have HSUPA too?
What exactly do you mean by full H? My download speeds didn't change at all
I am currently faced with this same stuck H issue.
I am running the stock AT&T ROM ver ... 1.62.502.0, Radio version 1.37.14.09
Sometimes when I travel to a particular work office I use dutty's 10 button Comm Manager to turn 3G off. This particular office is built like a fortress and I barely get signal inside. If I leave 3G on my battery is dead in a matter of hours.
So I turned 3G off for the first time since upgrading to this ROM, and later when I turned it back on I find I have a constant H indicator rather than the 3G I normally see.
Yes I am in an HSDPA area, but normally I would only see the H when downloading.
Yes, I use direct push with a hosted exchange server.
I've tried disabling HSDPA in KaiserTweak, and I get back to the 3G indicator ... But as you would expect my download speeds are limited to 300 to 400 kbit/sec.
With HSDPA enabled I average twice that, with bursts over 1mbit/sec.
Can anyone speculate why I have the constant H indicator now instead of only when downloading?
Everything still works, I just wouldn't mind knowing why I am seeing this change in indicator.
I have since found out that the the contant H icon is a result of AT&T upgrading their network. Since then, my download speeds have roughly doubled. Turns out the contant H is a good thing.
I went away on a business trip for a week and now upon returning I too am seeing the constant H, whereas previously I'd see 3G which would change to H and back when using data.
But that's not the part that is worrying me.
The problem I see is that the data connection is active all the time; it never drops. So besides the large H indicating HSDPA availability, once any data connection is made the 4 bars plus plus small triangle changes to 4 bars plus small H and *never* changes back. In the past I'm pretty sure the data connection would come and go as needed.
Is this bad at all? Seems like it would suck battery power to have the data connection active all the time. It's as if the KaiserTweak "always on: AT&T MediaNet" is stuck on (but I never actually did that tweak and it is actually disabled in KaiserTweak).
What's going on?
Have you done an upload speed test?
Apparently a constant H icon can indicate HSUPA support.
Little more info ... however finding a map of what was upgraded isn't that easy.
http://www.wirelessweek.com/article.aspx?id=158686
AT&T Nears HSPA
By Brad Smith
WirelessWeek - April 02, 2008
LAS VEGAS—AT&T will have all of its 3G markets enabled with the high speed uplink capabilities by the middle of the year, according to Hank Kafka, vice president of network architecture for the operator.
AT&T had 255 major metropolitan markets with W-CDMA/HSDPA at the end of 2007 and continues to add markets. Kafka said at a GSM Association roundtable on HSPA that AT&T expects to cover 350 markets with 3G by the end of 2008, including all of the top 100 markets.
The operator started installing HSUPA last year and now is in the process of rolling it out, he said. By mid-year, he said all of its 3G markets will have HSUPA. He says typical data rates on the downlink now are between 600-to-1400 Kbps with a peak of 3.6 Mbps, while the downlink typically is 500-to-800 Kbps.
There are upgrades for HSPA which take it as high as 14.4 Mbps and Kafka says AT&T is studying those. But he declined to say when or if AT&T will raise its data rates to those levels.
Kafka also said AT&T has seen significant data usage increases for customers using 3G.
Click to expand...
Click to collapse
Yea, I have the constant 'H' as well, but I think it's the same as having a constant 'E', meaning that you're connected to HSPA and everything's good.
switching bands
switched bands sometimes helps changing the icons from edge to 3g,to disable HSDPA you need to disable HSDPA through kaisertweak,schaps advancedconfig or hsdpa switch whether cooked into rom or manually installed to switch back to 3g

Speedtest Question

Hey guys,
I heard that FroYo differentiates the 3G and H icons on the notification bar.. but I have not seen mine change to H. How do I know if I have HSPA/HSDPA? I live in Orlando, Florida, so I would imagine we get good coverage here?
And also I see people put these crazy 3G speeds on their sigs of the speedtest.net application with like over 1MB DL speeds and such.. but the highest DL speed the application has recorded on my phone is around 600KB on 3G..
Any help?
H typically gains speeds of around 2-3Mbit i.e. around 2-300kb/s. So it sounds like you're still on normal 3G and an average connection at that. I only get H in a select few locations, most of the time I get the same speed as yourself.
nDrg said:
H typically gains speeds of around 2-3Mbit i.e. around 2-300kb/s. So it sounds like you're still on normal 3G and an average connection at that. I only get H in a select few locations, most of the time I get the same speed as yourself.
Click to expand...
Click to collapse
Oh I see. Eh I just tested it twice on FroYo and got DL speeds of 17 and 43 kb/s wtf ?
I haven't seen the H icon yet on Froyo. Was using Kang-o-rama 0.7b1 before I installed Froyo courtesy of Paul @modaco. The H icon would display alot on the Kang-o-rama rom. At my desk my nexus would display H icon with Kang now it shows 3G with Froyo. I unfortunately didn't run any speedtests on it before I installed Froyo.
The speed I am getting now in an area that displayed H previously are: download .8Mbps and upload 1.2Mbps.
Would these be average 3G or H speeds?
loggie1 said:
I haven't seen the H icon yet on Froyo. Was using Kang-o-rama 0.7b1 before I installed Froyo courtesy of Paul @modaco. The H icon would display alot on the Kang-o-rama rom. At my desk my nexus would display H icon with Kang now it shows 3G with Froyo. I unfortunately didn't run any speedtests on it before I installed Froyo.
The speed I am getting now in an area that displayed H previously are: download .8Mbps and upload 1.2Mbps.
Would these be average 3G or H speeds?
Click to expand...
Click to collapse
I may be wrong but I thought on CM which is what Kang-o-rama is based off of, the 3G symbol is replaced with the H symbol and that is why you saw it where you would normally have 3G. Can someone else confirm this?
I don't know why people can't understand this, seriously. 3G=H. H is short for HSDPA Which is... 3G. What Cyanogen did was a visual mod nothing more. Which I hate now because we end up with post like this. There's no difference and if there is it may be the new radio.
-------------------------------------
Sent via the XDA Tapatalk App
djpingpong said:
I may be wrong but I thought on CM which is what Kang-o-rama is based off of, the 3G symbol is replaced with the H symbol and that is why you saw it where you would normally have 3G. Can someone else confirm this?
Click to expand...
Click to collapse
Thanks dj
amd_203 said:
I don't know why people can't understand this, seriously. 3G=H. H is short for HSDPA Which is... 3G. What Cyanogen did was a visual mod nothing more. Which I hate now because we end up with post like this. There's no difference and if there is it may be the new radio.
Click to expand...
Click to collapse
H is enhanced 3G and H is faster than 3G and so 3G not equal to H. If H was displayed I expect to be able to get faster download speeds than if 3G was displayed and so I would prefer if H would be displayed when HSDPA available and 3G displayed when 3G available. I'm not sure if this can be the case.
3G = UMTS connectivity available (probably WCDMA).
H = HSDPA/HSUPA/HSPA+ link up.
H comes up only on custom builds (but some european builds reported to show H - not sure about the credibility of such reports), and H comes up only when data transfer is initiated.
Jack_R1 said:
H comes only when data transfer is initiated.
Click to expand...
Click to collapse
Thanks Jack, I had noticed that behaviour on some builds alright but not yet on Froyo.
Whilst there is a difference between H and 3G the H icon will not show up on "official" builds.
It was just a graphical change made in some custom ROMs.
When your signal changes from 3G to H there will be no indication, but it will still happen.
Meltus said:
Whilst there is a difference between H and 3G the H icon will not show up on "official" builds.
It was just a graphical change made in some custom ROMs.
When your signal changes from 3G to H there will be no indication, but it will still happen.
Click to expand...
Click to collapse
Thanks meltus

Suddenly no 3g, always H?!

My carrier had some little problems during the past weeks, aparently they were working on something. I sometimes, for short periods, did not have data connection or no servic at all. Now the problems are gone and a speedtest today showed that at my home, the download speed went from an average 1 Mbit to over 5 Mbit!
However, the H symbol won't go away anymore! It used to switch to 3g when not data was transferred. I assume that this will influence battery life.
Is there anything I should be worried?
From what I recall, H is faster than 3g, as long as your in a good signal area, the H will always be visable, it will only drop down to 3g if the area your in has no H signal... and if there is no 3g it will drop to a 2g signal... simples, having the H does not meen that data is being transfered!
I am aware of the different speed levels, what I experience now is that the H symbol stays all the time, whereas it used to change to 3g when idling even in areas with very good reception...
GMH24 said:
I am aware of the different speed levels, what I experience now is that the H symbol stays all the time, whereas it used to change to 3g when idling even in areas with very good reception...
Click to expand...
Click to collapse
Wait, I don't get what you're saying. Let me clear it up:
Very good reception = H
Not so good reception = 3G
You want to see H (means HSDPA which is a a type of 3G data, but it's faster).
MrSimtang said:
Let me clear it up
Click to expand...
Click to collapse
Okay, I'll try that too!
I live in an area with very good reception and therefore the phone used to switch from 3g to H whenever data was transfered and back . Now, however, it stays on H all the time and does not switch back to 3g when no traffic occurs.
It is just a change in the pattern my phone behaves so I wanted to get some info on that...
Hi, it's your phone doing what it should by seeking the best signal.
H refers to HSDPA which is based on UMTS (3G). Consider it a 'turbo' version of 3G. It's sometimes also referred to as 3G+ because it's faster then 3G but not really 4G technology. The tower in your area most likely got upgraded to HSDPA that's why you don't see the 3G icon anymore.
Sent from my GT-I9000M using XDA App
Not correct, he mentioned that his phone was using H on demand before, so the capability was there already.
The problem is that H mode uses more battery than 3G, which is why it normally only switches to H during data transfers instead of continously being on.
Possibly your provider made a change which forces your phone to stay in H mode. On hardcores homepage (see speedmod kernel thread) he describes a method to manually deactivate H mode if you want to play with it.
Hope that helps.
Sent from my GT-I9000 using Tapatalk
seems to be the explanation... Suddenly I have ~6 Mbit, so almost unsurprisingly there had to be a catch
as for disabling H, it would be permanently so not quite an option. I guess, I'll have to live with it but nevertheless I'll call customer support..
Hspa and 3g are actually different technologies, but can be used on the same site and freq. If you have noticed that your phone is nowdays all the time showing H ( hspa ) and not in 3g like before it means that your carrier has expanded their hspa features and capacity of the network on that area. Main difference between these two tech is of course the speed and how network resources are shared between the users. In 3g you have dedicated ones, but speed limited and in hspa you are sharing the resources between other ones under that cell area. hspa is good if you are near by the cell and there is not too many users from battery consumption point of aswell from througput point of view, 3g is better if you are on the cell edge due to dedicated resources reserved only for you. Main point is, battery consumption of your phone depends mainly how you use your phone ,what kind of applications you have and how often those are connecting/contacted by the network.
Browsing in 3g sucks!
Sent from my GT-I9000 using XDA Premium App

Categories

Resources