Database Develop

[Q] "Market" App Not Showing up after i rooted and installed a custom Rom?

I can't find my "Market" app anymore. I've tried re-rooting/reinstalling a ROM, I've wiped cache, etc....
I'm new to this so please bare with me x.x
I'm running: [ROM] aospCMod | AOSP 2.3.3 / CM7 (Gingerbread) [03/08/2011]
...and have tried AOSP 2.2 (Froyo) before, same thing.
How can i get my Market app back?

RESOLVED
All it took was a little more reading and searching ;D
Forgot to install Gapps.
FOR THE PEOPLE WHO DO NOT KNOW HOW TO INSTALL GAPPS
---------------------
1. Download Gapps zipfrom the forum post you downloaded your rom from.
2. Place it in the ROOT of your SD Card while your phone is in diskmode (changed from the dropdown menu).
3. Go to restore mode on your phone.
4. Choose Install from ZIP
5. ^ Again
6. Find the Gapps zip and choose yes.
7. Wait for install and done! !

[Q] Need a little help with installing LinuXperia XGIN

Well,
Code:
Model number
E15i
Android version
2.3.7
Baseband version
M76XX-TSNCJOLYM-53404015
Mem info
37MB/175MB
Mod version
GingerCruzt
Build number
GC84.246
That's the info on my phone.. It's rooted and all, could someone please explain me like to a 5 year old how to install this rom?
I'm good with computers, still bad with all those phones thingys.
Thanks in advance

i had the cyborgv6 rom its nice. as a cyborg rom to install should be like this:
First if you want make a back up with for ex. Titanium backup or something else.
1. if you dont have xrecovery or CWM recovery search and find them and install one of them. see here:
http://forum.xda-developers.com/showthread.php?t=974527 or
http://forum.xda-developers.com/showthread.php?t=881614
2. download the stock kernel rom and put it on sd card.
3. Reboot to xRecovery (click back button on ericsson logo)/ ClockWorkMod(touch the screen instead of click)
4. Factory Reset (Full wipe) ------> For new users who want to this rom.
5. Install custom zip
6. Choose zip from sdcard
7. Find your zip file, and flash it.
(* If you have any bugs, try full-wipe.) For first time installing CyBorg users, DO FULL WIPE, or you will stuck at the se white logo!!
8. reboot
see his page of previews version, the instructions are from here
http://forum.xda-developers.com/showthread.php?p=17850024#post17850024
if i helped you know...

arikos said:
i had the cyborgv6 rom its nice. as a cyborg rom to install should be like this:
First if you want make a back up with for ex. Titanium backup or something else.
1. if you dont have xrecovery or CWM recovery search and find them and install one of them. see here:
http://forum.xda-developers.com/showthread.php?t=974527 or
http://forum.xda-developers.com/showthread.php?t=881614
2. download the stock kernel rom and put it on sd card.
3. Reboot to xRecovery (click back button on ericsson logo)/ ClockWorkMod(touch the screen instead of click)
4. Factory Reset (Full wipe) ------> For new users who want to this rom.
5. Install custom zip
6. Choose zip from sdcard
7. Find your zip file, and flash it.
(* If you have any bugs, try full-wipe.) For first time installing CyBorg users, DO FULL WIPE, or you will stuck at the se white logo!!
8. reboot
see his page of previews version, the instructions are from here
http://forum.xda-developers.com/showthread.php?p=17850024#post17850024
if i helped you know...
Click to expand...
Click to collapse
oh, wow, seems I accidently a link, this is the right rom I was gonna install
http://forum.xda-developers.com/showthread.php?t=1576968
Are the instructions work the same? cause they have there a whole lot of files (Alfs Kernel Lastest v08a?)

same process! if you are in stock kernel(settings-about phone if its semc) just download only "Stock version rom in Attach Files " and follow the instructions
if i helped press, you know...

arikos said:
same process! if you are in stock kernel(settings-about phone if its semc) just download only "Stock version rom in Attach Files " and follow the instructions
if i helped press, you know...
Click to expand...
Click to collapse
which of the files for download there is the rom? and how do I install the other files?

in the page you gave go to:
{
Downloaded:
LX v.0.11c(Alfs) LX v.0.11(Stock)
LXv0.10-Alfs LXv0.10-Stock
LX V11 GOOGLE APPS LX V11(ALFS)LX V11(STOCK)
LX XG!N V8(Stock)
LX V10(alfs)LX V10 (Stock)
}
LX v.0.11(Stock) THIS is the ROM for stock kernel just download it
the attached files (SensorPatch.zip ...) you can download them IF you want to make it better
by same procedure as to install, "put them on sd card-go to recovery - install custom zip-Find your zip file, and flash it-reboot" but not make Factory Reset (Full wipe) its unnecessary.
By the way on instructions i gave, from the step 4 till 8 are in the recovery. to go there follow the step 3 "Reboot and go to xRecovery by (click back button on ericsson logo) or on ClockWorkMod(touch the screen when you see ericsson logo)" you must have one of them if you already have a custom rom installed "GingerCruzt"

Please Help! Trying to flash Jellybean rom.

I have a rooted 2.2 Captivate with Clockwork mod version 2.5.1.2 installed. Rom manger acts as though everything is working but when I go to reboot into CWM recovery I get the stock 3e. I go to reinstall packages. I end up with "E:failed to verify whole-file signature" "E:signature varification failed" My intentions were to follow the instructions I found on Android Authority.
they are:
1. Copy the Devil RC3 kernel and the CyanogenMod 10 V2 ROM files to your Captivate’s internal SD Card.
2. Turn off your Captivate.
3. Boot into Recovery Mode. You can do this by pressing and holding down the Volume Up, Volume Down, and Power buttons. When the screen turns on, let go of all three buttons.
*I'm stuck at this point because it won't load CWM
4. In recovery, use the Volume keys to navigate and the Power button to select.
5. Make a NANDroid Backup of your current ROM. Select Backup and Restore and select Backup.
6. Select Wipe Data/Factory Reset. Confirm the action on the next page.
7. Select Install ZIP from SD Card.
8. Select Choose ZIP from SD Card and locate the Devil RC3 kernel.
9. After the Devil RC3 kernel has finished flashing, choose Install ZIP from SD Card again.
10. Select Choose ZIP from SD Card and locate the CyanogenMod 10 V2 ROM file.
11. After the CyanogenMod 10 V2 ROM file has finished flashing, select Go Back.
12. Select Advanced > Fix Permissions.
Return to main recovery menu and select Reboot System Now.
Thanks in advance.

AllieB said:
I have a rooted 2.2 Captivate with Clockwork mod version 2.5.1.2 installed. Rom manger acts as though everything is working but when I go to reboot into CWM recovery I get the stock 3e. I go to reinstall packages. I end up with "E:failed to verify whole-file signature" "E:signature varification failed" My intentions were to follow the instructions I found on Android Authority.
they are:
1. Copy the Devil RC3 kernel and the CyanogenMod 10 V2 ROM files to your Captivate’s internal SD Card.
2. Turn off your Captivate.
3. Boot into Recovery Mode. You can do this by pressing and holding down the Volume Up, Volume Down, and Power buttons. When the screen turns on, let go of all three buttons.
*I'm stuck at this point because it won't load CWM
4. In recovery, use the Volume keys to navigate and the Power button to select.
5. Make a NANDroid Backup of your current ROM. Select Backup and Restore and select Backup.
6. Select Wipe Data/Factory Reset. Confirm the action on the next page.
7. Select Install ZIP from SD Card.
8. Select Choose ZIP from SD Card and locate the Devil RC3 kernel.
9. After the Devil RC3 kernel has finished flashing, choose Install ZIP from SD Card again.
10. Select Choose ZIP from SD Card and locate the CyanogenMod 10 V2 ROM file.
11. After the CyanogenMod 10 V2 ROM file has finished flashing, select Go Back.
12. Select Advanced > Fix Permissions.
Return to main recovery menu and select Reboot System Now.
Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1350266
Have a look at this link. Hopefully it will help you get to where you want to be. Also remember over-reading about what you are wanting to do is better than trying to find a solution to something because you missed a step.

m1batt1 said:
http://forum.xda-developers.com/showthread.php?t=1350266
Have a look at this link. Hopefully it will help you get to where you want to be. Also remember over-reading about what you are wanting to do is better than trying to find a solution to something because you missed a step.
Click to expand...
Click to collapse
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?

AllieB said:
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?
Click to expand...
Click to collapse
First of all you're getting a little ahead of yourself in trying to get to CM10 from where you are. Being on 2.2 you will need to get to a gingerbread ROM first as the bootloaders are different and will cause issues trying to go to CM10 if you don't go to gingerbread first.
The following link will take you to some one-click utilities that will update you to gingerbread along with the needed bootloaders. Also I suggest picking one from the list that says it has a CWM kernel injected so that you can save a step after the flash and have a CWM recovery kernel already installed.
Once you've used the one-click you shouldn't need to flash either of the kernels you've mentioned you should technically be able to just flash the CM10 and be good. Although when it comes to flashing the CM10 I suggest you go to the creaters thread or site and follow their exact directions for installing!

AllieB said:
Thank you.
I have a question. Do I need to flash the Devil RC3 kernel or should I just install the CyanogenMod 10 V2 rom from zip? Or should I flash the speedmod kernel on odin, then from CWM install the Devil RC3 kerenel, Then install CyanogenMod 10 V2. I just wondered if the two kerenels would conflict or if I would even need Devil RC3?
Click to expand...
Click to collapse
I highly recommend you install official cm instead. They are updated and will be more stable.
Sent from a jelly bean

[Q] CyanogenMod 9.1.0 on P1000 not showing network

Hi all,
I am new to flashing and ROM installing but I did learn few things so far, I only had my phone rooted before flashing no more
I download cm-9.1.0-p1.zip from get.cm / device=p1
Placed it on the sd card, rebooted in recovery mood, installed from zip file typically as follows
Download the prebuilt release of CyanogenMod you wish to install
Place the CyanogenMod rom .zip file on the root of the SD card
Boot to recovery mode on the Galaxy Tab (GSM)
Select the option to wipe data/factory reset.
Select Install zip from sdcard.
Select Choose zip from sdcard
Select the CyanogenMod file you placed on the sdcard
Once the installation has finished, rebooted system
Click to expand...
Click to collapse
then added GApps gapps-ics-20120429-signed.zip from goo.im / gapps to have google apps on my Tab
The problem now that My tab won't connect to Mobile Network, saying "Error searching for networks" and showing attached new screenshot
while it was showing this baseband on original old rom as attached
what can I do to fix this ?
and if there is a better ICS/JellyBean ROM that fits into the P1000 without missing features, plz guide me to it

I tried Modem flashing too
note that I already tried different modems flashing, fist got the one from cyanogenmod wiki matching my baseband :
JXJP4 ,md5: 8bbc850a0c1bc8b5db68bff3838ebabf
and then another two from different forums, but none of them did work
flashed all of them in recovery mode, still network not showing

Get a JPZ/JP4 modem zip.
Unzip it.
Copy the modem.bin to /radio/modem.bin
There is a modem thread in development, in the stickies section.
Here
http://forum.xda-developers.com/showthread.php?t=1069727
Sent from my GT-I9300 using xda app-developers app

tried both not working
thanks priyana for your reply,
tried both not working, tried copying them to /radio
and tried installing on recovery !
any ideas
priyana said:
Get a JPZ/JP4 modem zip.
Unzip it.
Copy the modem.bin to /radio/modem.bin
Click to expand...
Click to collapse

nevermind
Nevermind, I am retocking my tab

[Q] i9001 CWM update problems

Hi, i have a problem upgrading from CM 11-20140216-UNOFFICIAL-dev_connection_team-ariesve (4.4.2 I9001XXKF8)
to CM11 (4.4.4) on my Samsung Galaxy S plus
http://forum.xda-developers.com/showthread.php?t=2579431
The problem is, that my existing CWM 6.0.3.5 refuses to update
to the required 6.0.4.9. I created a copy of these files on my phones internal
memory listed in the thread for latest CWM and TWRP. Checksums are ok.
Then i booted into CWM recovery -> install zip -> choose zip from sdcard -> and so on
But it quits installation with this error message:
Code:
Can't open /sdcard/blablabla.zip (bad)
The path is existing and so are the files. The displayed path is ok.
Does anyone know what to do? The last updates just went fine,
except my previous custom recovery was replaced by CWM when upgrading from CM9 to 10.
I think it was TWRP before, but i am not really sure. When it is possible i would like to replace CWM with TWRP again.

Bitmuncher said:
Hi, i have a problem upgrading from CM 11-20140216-UNOFFICIAL-dev_connection_team-ariesve (4.4.2 I9001XXKF8)
to CM11 (4.4.4) on my Samsung Galaxy S plus
http://forum.xda-developers.com/showthread.php?t=2579431
The problem is, that my existing CWM 6.0.3.5 refuses to update
to the required 6.0.4.9. I created a copy of these files on my phones internal
memory listed in the thread for latest CWM and TWRP. Checksums are ok.
Then i booted into CWM recovery -> install zip -> choose zip from sdcard -> and so on
But it quits installation with this error message:
Code:
Can't open /sdcard/blablabla.zip (bad)
The path is existing and so are the files. The displayed path is ok.
Does anyone know what to do? The last updates just went fine,
except my previous custom recovery was replaced by CWM when upgrading from CM9 to 10.
I think it was TWRP before, but i am not really sure. When it is possible i would like to replace CWM with TWRP again.
Click to expand...
Click to collapse
I had the same problem a couple of times before. I found out that zip file was corrupt, hence the Can't open .zip (bad) error.