Database Develop

[Q] I want to flash a custom rom

Hi
my phone is a galaxy GT-I9000
PDA : I9000BGJP3
PHONE : I9000BGJP2
CSC : I9000XECJP2
Build Info : 2010, 11
it has froyo 2.2 , Movistar Spain stock rom
it is not rooted
and it has recovery and download modes
Now I want to flash a custom rom (cyanogen or darky's)
i have read a lot of guides and tutorials but i'm still a little confused
So I want to know if I need to flash the firmware first, then only after that, I install the custom ROM ?
Or do I directly install a custom rom without flashing a new firmware ?
thanks for your help

Hi ziko360, since it sounds like you are new to custom roms I recommend you first try darkys rom.
If you are wanting to flash darkys v10.1 then yes you first need to flash the jvh firmware then flash darkys v10.1 after.
If you dont want to flash a custom rom you could always flash jvo from samfirmware.com then just flash a custom kernal instead.
Edit: Iv just noticed you asked in another post that you wanted to install the voodoo lag fix. If you have done this, then remember you must first diable the lag fix!
Sent from my GT-I9000 using XDA App

Sparksltd said:
Iv just noticed you asked in another post that you wanted to install the voodoo lag fix. If you have done this, then remember you must first diable the lag fix!
Click to expand...
Click to collapse
Can you tell us how to disable the lag fix... I think that its this error I've created last time ^^
Mellovia S.
Sent from my GT-I9000M using XDA Premium App

You should create a file or folder named disable-lagfix and place it in the voodoo directory on your sd card and reboot the phone. Or if that's too complicated you can Download from the android market the application Voodoo Toggle reboot Button - just hit the button so that voodoo is off and reboot. Also, in the app Voodoo Control there is option to disable voodoo lag fix

Ok thanks alot. i'll check this soon..;-)
Sent from my GT-I9000M using XDA Premium App

Sparksltd said:
Hi ziko360, since it sounds like you are new to custom roms I recommend you first try darkys rom.
If you are wanting to flash darkys v10.1 then yes you first need to flash the jvh firmware then flash darkys v10.1 after.
If you dont want to flash a custom rom you could always flash jvo from samfirmware.com then just flash a custom kernal instead.
Edit: Iv just noticed you asked in another post that you wanted to install the voodoo lag fix. If you have done this, then remember you must first diable the lag fix!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
ok thanks a lot
It is actually Darkys 10.1 that I have chosen
I've read the tutorial on Darky's website and it explains everything (flashing jvh firmware, disabling lagfixes... )
thanks for your help

ziko360 said:
ok thanks a lot
It is actually Darkys 10.1 that I have chosen
I've read the tutorial on Darky's website and it explains everything (flashing jvh firmware, disabling lagfixes... )
thanks for your help
Click to expand...
Click to collapse
The fix is flash stock Froyo with pit and repartition checked via Odin if rom breaks your phone .
jje

Help with jv rom versions.

Hi
I currently have an vodafone unlocked galaxy running bujv9 rom. and cf-root XWJVH kernel. phone is rooted.
I been looking at kernels which support voodoo sound and other stuff as my one does not.
How do i go from a jvh rom and kernel to say a jvr kernel and rom which supports the voodoo stuff.
Is it a simple wipe then CWM flash new rom then odin jvr kernel. or other way around. Not sure.
Sorry still learning galaxy flashing. well different from HTC flashing.
Cheers.

If you want to try latest rom and a kernel with all features flash stock JVS in odin and then flash Darkcore 4 or Semaphore 1.7 in odin

thompson2009 said:
Hi
I currently have an vodafone unlocked galaxy running bujv9 rom. and cf-root XWJVH kernel. phone is rooted.
I been looking at kernels which support voodoo sound and other stuff as my one does not.
How do i go from a jvh rom and kernel to say a jvr kernel and rom which supports the voodoo stuff.
Is it a simple wipe then CWM flash new rom then odin jvr kernel. or other way around. Not sure.
Sorry still learning galaxy flashing. well different from HTC flashing.
Cheers.
Click to expand...
Click to collapse
Your desired rom should have kernel so no need for flashing twice.
You will probably get away with factory reset and cwm flash. Any probs you may have to flash stock first.
Sent from my Galaxy S using XDA Premium App

thompson2009 said:
Hi
I currently have an vodafone unlocked galaxy running bujv9 rom. and cf-root XWJVH kernel. phone is rooted.
I been looking at kernels which support voodoo sound and other stuff as my one does not.
How do i go from a jvh rom and kernel to say a jvr kernel and rom which supports the voodoo stuff.
Is it a simple wipe then CWM flash new rom then odin jvr kernel. or other way around. Not sure.
Sorry still learning galaxy flashing. well different from HTC flashing.
Cheers.
Click to expand...
Click to collapse
Hi Mate can you tell me how did you root your phone please because i have the same i9000 locked to vodaphone and i dont know how to root it,
thanks

kyashars said:
Hi Mate can you tell me how did you root your phone please because i have the same i9000 locked to vodaphone and i dont know how to root it,
thanks
Click to expand...
Click to collapse
There are apps that will do this, but may not work properly (depending on a lot of things). If you're unsuccessful with the app, or if you'd rather another way, the main to go about it is to flash a kernel that is already rooted.

Thanks for your reply, my problem is that i can't find the right cf-root kernal and also because phone locked to network my build number is bujv9,

Flash the stock jvX that you want first then flash the kernel from odin as pda,safe way
Sent from my GT-I9000 using XDA App

roundbelly said:
Flash the stock jvX that you want first then flash the kernel from odin as pda,safe way
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
It is Locked to Vodafone, can i flash jvX ???

kyashars said:
It is Locked to Vodafone, can i flash jvX ???
Click to expand...
Click to collapse
If you can enter download mode, you can flash whatever you like.

Help with MODEM on JetpackROM+Semaphore 1.7!

Guys , iv'e noticed that my battery'd draining on JVQ modem so, i would like to change it to JVR but even after using the jetpack rom tool,SGS kernel flasher the baseband remains same it says "XXJVQ" . Any ideas on changing the modem??
I9000 on JetpackROM v4 + Semaphore v 1.7 JVS.

Not sure, but doesn't Odin support only modem flashes too?
So, if you download eg. Stock JVR rom from samfirmware and flash only PHONE-packet, it could work.

4rm45 said:
Not sure, but doesn't Odin support only modem flashes too?
So, if you download eg. Stock JVR rom from samfirmware and flash only PHONE-packet, it could work.
Click to expand...
Click to collapse
So, should i give a try???

Ashtrix said:
So, should i give a try???
Click to expand...
Click to collapse
Of course
But remember to back up everything
E: And no tick for re-partition

its because the build.prop didn't changed

i got it fine now battery's good!
but i will do a flash when it get's messed!

I've, got same problem modems only works in gsm mode even then it's bad tried jvs on jar now no better you can just flash using Odin just choose which ever modem pack you want but it no helped me battery is incredible 3 days and still got 25% hope some one can sort this great rom fast as well

[Q] from imilka cm9 v3 to the LPY Official

Am I able to use:
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
First ICS for Note
N7000XXLPY 4.0.3 2012 May N7000OXALPY Open Germany posted to OP
This is Non Wipe version
Installation note : How to update from GB ROM to ICS
Install using Mobile Odin safely
- Download N extract ROM
- Copy Extracted file to a folder e.g ICS ROM On Ext/Int SD card
- Download CF Root for LPY
- Extract CF root till get zImage file
- Copy zImage file to same above said folder in SD car
- Open Mobile Odin
- Select 'Open file' N point to ROM file
- select Kernel tab N point to zImage file
- select Ever Root option
- Flash
- You will get ICS ROM + Root + CWM
Click to expand...
Click to collapse
that?
I'm on iMilka v3 cm9.. flashing and wiping doesn't seem dangerous to me from mobile odin?
Greetings,
Marco208

marco2082 said:
Am I able to use:
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
that?
I'm on iMilka v3 cm9.. flashing and wiping doesn't seem dangerous to me from mobile odin?
Greetings,
Marco208
Click to expand...
Click to collapse
hmmm i had ics repacked rom, and went to gb to be 100% safe and flashed without problems, maybe you should go to gb and then flash ics?

GB bro
Sent from my GT-N7000 using Tapatalk 2

But that's so much work...
Download still walkin' to my home... pretty loaded I think... Let's see if someone else has some experiences with imilka

marco2082 said:
But that's so much work...
Download still walkin' to my home... pretty loaded I think... Let's see if someone else has some experiences with imilka
Click to expand...
Click to collapse
hmmm if you want to risk and lazy to do a bit longer way- your choice ;D

EdgaBimbam said:
hmmm if you want to risk and lazy to do a bit longer way- your choice ;D
Click to expand...
Click to collapse
Haha, ye... ok true.... tell me what rom did you flash? and trough mobile odin?

marco2082 said:
Haha, ye... ok true.... tell me what rom did you flash? and trough mobile odin?
Click to expand...
Click to collapse
i had criskelo rom ics v2, restored my rocket rom backup with 4.2 abbys kernel help and from rocket rom flashed without problems LPY firmware

Same boat
We are on the same boat! I'm also on Imilka CM9 v3 and I had been searching and would like to see if I can just flash LPY using PC Odin. However, my understanding is that our CM9 is using those "i9220LP5" boot loader so it doesn't look good.
Reading reading reading...

Carysyd said:
We are on the same boat! I'm also on Imilka CM9 v3 and I had been searching and would like to see if I can just flash LPY using PC Odin. However, my understanding is that our CM9 is using those "i9220LP5" boot loader so it doesn't look good.
Reading reading reading...
Click to expand...
Click to collapse
emmm if you flashed ics repack lp1 then flashed cm9 then you dont have bootloader i9220 ^^ if you flashed chainfire LP5 repack, then you will have bootloader i9220. Only chainfire LP5 repack has bootloader i9220

Just flashed it using Mobile Odin Pro, the process was very smooth.
Sent from my GT-N7000 using XDA

marco2082 said:
Am I able to use:
http://forum.xda-developers.com/showpost.php?p=25916135&postcount=1840
that?
I'm on iMilka v3 cm9.. flashing and wiping doesn't seem dangerous to me from mobile odin?
Greetings,
Marco208
Click to expand...
Click to collapse
Carysyd said:
We are on the same boat! I'm also on Imilka CM9 v3 and I had been searching and would like to see if I can just flash LPY using PC Odin. However, my understanding is that our CM9 is using those "i9220LP5" boot loader so it doesn't look good.
Reading reading reading...
Click to expand...
Click to collapse
I took the plunge from imilka v3 CM9 and followed dr.Ketan's steps, and it worked flawlessly. Note though that I did have to do a full wipe to get past the Samsung boot screen, but outside of that, I restored a previous backup of my apps through Titanium, and all is well.
I do miss my AOSP apps, look and feel, but it's nice to have all functionality work as expected with the stock rom.
Hope this helps!

[Q] How To for the Galaxy Note GT-N7000

Hello,
I am new to the XDAdevelopers forum and don't have much knowledge of rooting or installing customs roms to Android phones.
I currently own the Galaxy Note GT-N7000 and just looking around some videos I would love to have some customs rom installed on my phone, such as the new Jelly Bean roms that are out now.
I would love to know on how to root my Galaxy Note if there is a Noob Tutorial for rooting the galaxy note and maybe a Noob Tutorial on how to install Jelly Bean rom that is currently out (any suggestion on which rom would be great)
As I said I am a noob and don't have much knowledge on how to mod your android phones and any help would be greatly appreciated
FYI: Looked around the forums for the while, I couldn't find anything simple enough, I bet there is somewhere in the forum, not sure if I was looking correctly >.<

Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best

rajsekhar.300 said:
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
Click to expand...
Click to collapse
Thanks for replying do you have any links to the Kernals and JB roms ? and if there is any tutorial for them too
Thanks again for your time.

Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921

rajsekhar.300 said:
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
Click to expand...
Click to collapse
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT

Georific said:
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Click to expand...
Click to collapse
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.

jeetu1981 said:
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
Click to expand...
Click to collapse
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel

No.After you flash the kernel,you can install jb rom through cwm

Georific said:
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
Click to expand...
Click to collapse
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.

jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?

Georific said:
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Click to expand...
Click to collapse
As long as you are on any safe kernel you can flash any JB rom, no matter if you are on any TW ICS, GB or CM9/10 roms. I am on CM10 right now and flashed it directly on stock LRQ ICS with Speedmod kernel.

jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?

Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.

Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
You can find those additional files in the same link
Scroll down few posts and you can find it

jeetu1981 said:
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Click to expand...
Click to collapse
I got it to work for Odin I added the Kernal Hydra do I just press Flash Firmware ? Please REply ASAP

rajsekhar.300 said:
You can find those additional files in the same link
Scroll down few posts and you can find it
Click to expand...
Click to collapse
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?

Georific said:
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Click to expand...
Click to collapse
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all

bad or good...
jeetu1981 said:
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
Click to expand...
Click to collapse
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!

Georific said:
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Click to expand...
Click to collapse
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.

its works
jeetu1981 said:
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
Click to expand...
Click to collapse
The full wipe worked thanks so much man appreciate it for everything