Even though I am pretty sure I know the answer...does anyone know/has anyone tried applying the ODIN method for the stock Gingerbread rom to a Verizon Tab? From all of the posts I have read it appears to work on the T-Mo and Bell Tabs...but i really want to flash this to my VZW beast!!! Thanks in advance!
Related
Is ther anyone working on development that would he compatible with the Galaxy Tab from US Cellular? Are any of the ROMs or CWM able to be put on the USCC Tab?
Sent from my SCH-I800 using Tapatalk
US Cellular Tab Question
I have the same question. I have a Tab for the US Cellular network. It says it's an SCH-i800 for CDMA. Isn't that the same model as the Verizon? Would "stuff" for Verizon work on this Tab??
Thanks for listening!
Ugh, I thought I'd read enough before going today to buy a used US Cellular tab from someone (I'm only using it in WIFI mode, have no need for data connection). Got rooted fine via z4Root but now don't know what else I can do.
I flashed ClockworkMod for Verizon as saw another post that said since both CDMA should work. It flashed but when boot into recovery goes into normal Samsung recovery.
Is rooting as far as you can get w/ US Cellular or can I flash ROMs somehow?
I'm not sure if this is the same as the Samsung Transform, but when I flashed a custom recovery, you have to make it stick somehow, i believe by flashing a custom rom. I'm not 100% so keep reading around the forums but thats how I had to do it for the Samsung Transform.
Sincerely,
D3luSi0n4L
I have a US Cellular Galaxy tab and I just flashed ICS to it and it runs like a champ!
I followed the instructions at [HOLY CRAP][SPRINT P100] Stock to ICS - Complete Walkthrough
I was afraid I would mess it up but it works great now!
hi i was wondering has anyone on tmobile got the official gingerbread yet? ive seen loads of people have got gingerbread through rooting but im scared of bricking my phone and dont see huge benefits from rooting it. if any one could tell me if gingerbread is out, that would be grateful and if anyone could tell me the benefits of rooting and a very easy way of rooting that would be great. Thanks again
Plug into kies and if upgrade is available it will tel you, or phone t mobile and ask!
Insanity cm 012/glitch
Hi, I have to take the chance to thank all the xda developers and forum users that have helped me with the hints and tutorials. I had never have to ask because all my questions where already answered in the forum but now I have a specific case where I have a SGH-T849 Tmobil tablet and need to install the latin P1000N rom. In case anyone wonder why it is because in the country I am the voice and 3g works perfect with this rom and with the current rom the max I've got is edge + voice.
So the question is .... Can I flash the P1000N stock rom in a SHG T849? If not and some one has the info I would like to know why.
Thanks again.
I used to have tmobile tab and i flashed p1000 roms from the samfirmware without any problems.
You will have to flash tmobile radio after you are done rom flashing.
if you want to be extra careful, dont flash the bootloaders.
Still dont blame me in case you brick it.
You can't flash a "N" rom unless that's your model. They are not compatible.
You won't get 3g on a t-mobile tab unless you're on a t-mobile network (1700/2100 bands). The rom can't change that.
thanks rangercaptain..... little bit late or better said too soon I have tried, I bricked it :-( no download mode no boot only lights the buttons...
Hello All!
I am working with a SGH-I987 (ATT) for bluetooth related application development. Unfortunately 2.2 is being a bit of a bear to deal with. I was looking on the forum and found quit a few roms are available for gsm tabs. Could someone steer me to the roms that will support the SGH-I987?
I was looking at CyanogenMod9, but am not sure if my tabs will support it.
Thanks in advance!
If this is your first rom on a tab Id suggest starting with Overcome. A full guide is available too.
Enjoy!
Sent from my GT-P1000 using XDA App
some rom ready?
Hello,
I want to upgrade my att tab, yo ICS or GB (actually froyo).
You know where can i get a full guide and rom?
(i have that unlocked, rooted and with the phone option)
Thanks
everything you read here will work for your tab.
P1000 is the euro generic version, yours is AT&T model that has different radio/modem hardware to suite AT&T network.
Just take note of what baseband you are on (Setting - Phone -About)
After flashing CM9 following the whole overcome restock, overcome kernel 4.0, then CWM flash etc... you then need to find the same modem (search in dev there is modem thread), unzip it and extract just the modem.bin and paste it to /radio/modem.bin
disclaimer is: of course I can't tell you if your tab can then make calls and have 3G. that might be AT&T limitation.. others may know more.
I would like to convert my Galaxy S I9000 to a Galaxy S I9000M (Vibrant) Canadian.
I would appreciate it if someone could help with the rooting and tell me the name of the firmwares I need to use such as the
Kernal, Rom, etc.
Thank You.
So just to clarify (because I'm a bit confused) you want to convert one device to another? The only safest thing you can do is change build.prop, and that's only going to change how the device displays. If you want to flash a Vibrant rom onto the I9000, that's a no go because that can screw up the device.
Sent from my GT-P7510 using Tapatalk HD
Any reasoin why you want to make the change
Hi,
My phone used to be a i9000m.
In order to use all the custom roms, I had to convert it to a i9000.
The only thing that carries over every time I flash a new rom is the modem.
You need to use the "KG3" because I think it has something to do with the frequencies that are used by the i9000m.
So, maybe your i9000 modem may not use the same frequencies? I'm guessing, not knowing.
i9000 was wonderful, why change?
Sent from my GT-I9000 using xda premium
Thank You for your replies.
I am trying to learn about the Android system.
I would like to convert my Galaxy S I9000 to run on the Bell System in Canada
and I figured I need to convert to something like the Galaxy S I9000M (Vibrant) Canadian firmware.
I would like to have an i9000 working with (Bell) Canadian firmware.
I would like to wipe/re-program the phone to a factory firmware and install a firmware that will work in Canada.
The same process you do when you format your PC's harddrive.
I would like to root/clean my i9000 and re-program it with updated firmwares, giving me an i9000 Canadian Phone .
If this is possible, I need to know the names of the Rom, kernel, etc. for Canada, I could use to do this.
Thank You.
Factory Firmware you can get from here http://www.sammobile.com/firmwares/1/
I have the GT-I9000M_I9000UGKC1_BMCKC1.zip from sammobile
Thank You
nyloncrack
Since you have your phone working in Canada would you be so kind and share with me,
the firmware you installed to do this and
how You installed it.
Also do you have a link for this "KG3" rom/kernal file?
Thank You.