Related
Even worse, its a MDA Compact V.
Basically, I got the newton rings issue a few months ago and after reading threads on here, tried the duct tape trick which worked a treat....for about a month.
Then the issue came back of the screen not responding, so I continually used the tape to fix the screen. It got to the point where I had done it that many times, I was having to carry a roll of tape around with me, and the front of the front facia began to lift on the left hand side of the phone each time I did it.
It got to the point where I didnt need the tape anymore, I could just use my fingernail to pull the layers apart which would make the screen respond again.
However, recently I noticed a spec of dust under the screen. I put up with it for a while but last week I decided to try and get it out.
I stupidly lifted the layers apart and blew into the phone. This caused the touchscreen to behave very erratically and did not move the dust.
I was a bit tipsy at the time and actually lifted the whole of the front off the phone (thinking I could clean the screen and stick the front back down) but now the phone will not respond to touch no matter what I do.
I was thinking of trying to replace the front parts myself, but as mentioned its a Compact V not a D2, so the shape of the front of the handset is slightly different and I cannot seem to find anywhere that I can order the front facia.
I've got a lock on the phone, so I cant even flash it if I wanted to sell it as 'broken'
Can anyone think of ANYTHING that could help?
Any advice would be GREATLY appreciated!
You can flash your phone if you just put the Rom on a storage card and update it from there, and new digitizers are just 4 dollars, so just put a new one in ( or I can do it for you if you pay for the costs) I've replaced my digitizer about 3 times now... and im pretty good at it XD
i really hate to say it. but i think its just time to buy a new phone. I know money may be an issue. i dont have the cash to fork out for new phones either. but if this happened to me. i would do my best to back everything up. then just buy a cheap phone untill i saved up . i have an htc pure right now saving up for an evo 4g. I just upgraded my contract so i will have to pay full price for the evo 4g around $500.00 . unless ya can limp this one along . but from what it sounds like is its about time to bury that one ...
devices messing up does suck, im sorry..
Good Luck
Thanks guys.
Is it possible to flash from the SD card when the device is locked?
maxcherry said:
Thanks guys.
Is it possible to flash from the SD card when the device is locked?
Click to expand...
Click to collapse
Yes it is possible. When flashing from SD you don't have to use your screen in any way. Have a look in the ROM-Threads, u will find the way to flash and some great "how-to"s.
Mar'Cel said:
Yes it is possible. When flashing from SD you don't have to use your screen in any way. Have a look in the ROM-Threads, u will find the way to flash and some great "how-to"s.
Click to expand...
Click to collapse
Thanks Mar'Cel. I notice we both have the same device. Do you know anywhere online where I would be able to order replacement parts?
Thanks again, Max.
maxcherry said:
Thanks Mar'Cel. I notice we both have the same device. Do you know anywhere online where I would be able to order replacement parts?
Thanks again, Max.
Click to expand...
Click to collapse
I believe if you search on screen replacement threads they have stated where they were purchsed.
Also, you can use Pocket Controller Pro or My Mobiler to access your screen from your PC.
heres the thing my usb cable broke no way of fixing it or buying another one till payday the phone is not completely bricked,i can go into the recovery menu but i need to be able to flash an update or rom from sd card the phone powers on shows att screen and stays on att screen while you can hear the galaxy s sound so the phone boots but it stays on the att screen basically like having a bad digitizer where you cant touch anything.ive searched for about 2 hours on a way to flash from sd card without a usb cable.any ideas?
do you have a rom on the internal memory?
do you have a MicroSD card in your phone?
do you have an SD adapter with a card reader?
if so you should be able to install from CWM
no rom on internal memory yes i have an adapter i think if i can get the clockwork mod update.zip i can fix it but cant find that file.need someone to post it for me lol
The cable is standard USB to microUSB - you should be able to borrow one at work, from a neighbor, walking into any phone reseller. As for buying one, any discount electronics place (frys, microcenter, etc.) should have one $5.
Lol I know this everyone here wants 20 for one sucks living in a redneck city, radioshack Walmart and staples is all.
Sent from my HERO200 using XDA App
ummkiper said:
no rom on internal memory yes i have an adapter i think if i can get the clockwork mod update.zip i can fix it but cant find that file.need someone to post it for me lol
Click to expand...
Click to collapse
guess you plan on using magic to get it on your phone from here...lol
iamamp3pimp said:
guess you plan on using magic to get it on your phone from here...lol
Click to expand...
Click to collapse
Nope I broke down and got a mini usb to micro usb adapter for $10
Sent from my HERO200 using XDA App
Hello,
Some days are better than others...
I managed to break several of the small metal pins in the sim reader, don't ask me how but I did it =(
I unmounted the phone and it's really just a small circuit board linked to the motherboard with a single ribbon
I have googled for where to find this spare part but no chance so far
Would you know where I could find this part and help me revive my Nexus S ?
Thanks for your help
Thanks for deleting my useless post : just found out a link in the post below !
Sorry =(
Did you find a solution ? My sim card reader (or sim card tray) is broken too and I can't find the replacement part to buy...
Couldn't you guys just do a warranty claim? It shouldn't break that easily unless you were messing with it.
I can't claim warranty since it's "customer induced damage" : needed to insert my sim card into an Ipad. Not willing to lose my micro sim adapter, I put it in the Nexus S without a sim in an tore the pins when taking it out
Moreover, I live in Europe and Samsung has after-sales per region, if not country. they would'nt accept an US purchased handset anyway.
Didn't find any trace of this spare part on any other site but globaldirectpart and it's still showing as "Coming soon"....
I am in Brazil and the phone hasn't arrived in here so Samsung Brasil don't touch it.... despite the fact that they are going to say that this is not covered by warranty.
I did not find anywhere else too...
How about insurance then? But I'm assuming you don't have that either or can't.
Good luck to finding the part though. Globaldirectpart seems to have a tendency of inflating price.
DKYang said:
How about insurance then? But I'm assuming you don't have that either or can't.
Good luck to finding the part though. Globaldirectpart seems to have a tendency of inflating price.
Click to expand...
Click to collapse
Don't have any insurance for my phones and it wouldn't work either cos I damaged the phone myself =)
I don't really mind the price since it would cost me about 50 euros including shipping due to the exchange rate between $ and €. Just missing my phone a lot and tired of waiting =)
rahan95 said:
Don't have any insurance for my phones and it wouldn't work either cos I damaged the phone myself =)
I don't really mind the price since it would cost me about 50 euros including shipping due to the exchange rate between $ and €. Just missing my phone a lot and tired of waiting =)
Click to expand...
Click to collapse
here goes the replacement part right here but they are out of stock for now
http://www.globaldirectparts.com/Nexus-S-GT-I9020T-SIM-Card-Tray-p/smsng6098700.htm
Thanks but we've known that for weeks =)
The best part is the "Coming soon" !!!
Yep! We still waiting for the replacement part to be available... I read about a guy that replaced it with a Galaxy S part... but I did not figure out how.
I called a few suppliers in Asia but no luck so far
it's killing me to have my Nexus S in a drawer for a 10 bucks spare part =(
Yes, me too... that's why I love Apple and my iPhone... Samsung sucks... If I find it anywhere I will post it. I will try to find some more information about replacing it with Galaxy S part.
Do you have any link about this guy using the Galaxy S tray ?
update
Anyone have an update on this? I just broke one of the pins inside the sim tray as well....I am unable to find the parts anywhere online. This is driving me nuts....I'll even pay to repair it!
How did you break yours? I can see the op breaking his with an empty micro sim adapter, but if this is breaking from normal usage, that's not good..
Sent from my Nexus One using Tapatalk
Not yet. I've read that it is possible to replace it with the Galaxy S sim tray. I've bought one and I am waiting it to arrive. I should have it in one week.
It seems that this sim tray is not good at all...
Bad News! The Galaxy S connector is different from the Nexus S one. Look at the picture:
Uploaded with ImageShack.us
I believe that the guy who changed it, changed only the sim part, keeping the "sim board" the same... I don't know how to do it, I will try to find out, if anyone know, please help me.
if you read the post carefully, the guy did say sim tray, you can use most sim tray, as long as the pins are position 3+3 at each sides, but you must know how to solder/desolder.
Do you know how do I do it ? I know how to solder/desolder, but I don't know exactly what should I do.
Here is a picture of the Galaxy S Sim Tray. Should I desolder this points marked by the red arrow (and off course in the oposite side) and sold it to the Nexus S board ? Is the sim tray just fixed by this solded points ?
Hello,
I'm having a strange problem with my newly acquired HTC One 802w (M7_DUG). As you may know, this version has a slot for an external SD Card.
Coming from the Defy I had a 32GB Class 10 Samsung SD Card that I installed on the One. A few days later (always running on stock ROM) I notice that the SD Card is no longer recognized. I then switched to a 4GB Class 4 Kingston SD Card just to see if that one worked well, but no, it also stopped being recognized a few days later. On the last try yesterday I used a 8GB Class 2 nobrand SD Card and today is fried again!
When I try to connect them to the computer they are not recognized (nor I can format them) and the cards are hot as hell! I mean REALLY hot. This obviously does not let me dig further because I unplug them right away. This leads me to believe that there's some kind of short circuit inside the card.
I honestly don't know what to do as obviously I don't want to keep kililng sd cards! Anyone experiecing the same problem?
Here are my specs:
HTC One 802w M7_DUG
ROM MaximusHD 1.0.2 Rooted
Unlocker bootloader
S-ON
EDIT: Solution here
EDIT 2: This seems to apply to BLACK models only. SILVER model seems unaffected from this issue.
No. i use a 64 gb samsung micro sd for 3 month now in my dual. All working fine.
Hi! I have the same problem - one of my SD cards died in 802w... And some other man from our russian forum 4pda also had such problem.
My idea of what happens is that it's just the mechanical damage. There are some projections on the inside of the back cover which are supposed to hold SD and SIM cards in place so they don't slip out of slot (?), but the problem is they're placed too close to the slot's end. So if you close the back cover that projection may press on SD card's end and just cracks it in two pieces.
At least that's what happened with my microSD... First I didn't notice it but then checked and it's really cracked. So this may be an answer - careful people tell that cards work normally, and strong people like us [ ] experience dead cards...
vitalif said:
Hi! I have the same problem - one of my SD cards died in 802w... And some other man from our russian forum 4pda also had such problem.
My idea of what happens is that it's just the mechanical damage. There are some projections on the inside of the back cover which are supposed to hold SD and SIM cards in place so they don't slip out of slot (?), but the problem is they're placed too close to the slot's end. So if you close the back cover that projection may press on SD card's end and just cracks it in two pieces.
At least that's what happened with my microSD... First I didn't notice it but then checked and it's really cracked. So this may be an answer - careful people tell that cards work normally, and strong people like us [ ] experience dead cards...
Click to expand...
Click to collapse
Thank you for your suggestions. I will try with another card and see what happens. I will report back.:good:
SOLUTION!
Well...sorry for the late reply but took me a long time to dig into this.
As @vitalif mentions the SD Cards suffers a mechanical damage. This is due to the pressure received from the protuberance in the removable back cover that should supposedly keep the SD card in place (not needed though as card/SIMS are physically held by the slot, but c'est la vie!)
The first thing I tried is to remove the small dent all Micro SD cards have but these cards are very sensible and the circuitery reaches this place as well, so I ended up ruining a few of them.
The solution I found was to use a dremel to remove that protuberance from the back cover as you can see on the attached photos. This has to be done with patience and probably better to have experience with these tools.
With this method I have been using the same SD Card for the past two months with no problems at all!
very interesting, i use my samsung microsd card from the begining and not damage at all. Maybe only black version have this problem , mine is silver and i open cover almost once per day .
802d in silver here and never faced sd card issue , using it since august.
using silver and no problems for past 5 months.
This seems to be a black edition only problem so far....any silver edition out there with this problem?
Same problem on black 802d model
The phone (black 802d) just broke my Kingston 32Gb microSDHC in half.
The back lid was not laying flat on the back since it was pushing against the sdcard, probably in my pocket, it got squeezed tighter, applying all the pressure via the back-panel extrusion onto the sdcard, which cracked it. Lost all my data
mjollnyr said:
The phone (black 802d) just broke my Kingston 32Gb microSDHC in half.
The back lid was not laying flat on the back since it was pushing against the sdcard, probably in my pocket, it got squeezed tighter, applying all the pressure via the back-panel extrusion onto the sdcard, which cracked it. Lost all my data
Click to expand...
Click to collapse
Yeah, is a pain in the neck. I also lost all my data.
You should try my solution: http://forum.xda-developers.com/showpost.php?p=49903638&postcount=5
So far this seems to be a BLACK edition problem only.
J_M_V_S said:
Yeah, is a pain in the neck. I also lost all my data.
You should try my solution: http://forum.xda-developers.com/showpost.php?p=49903638&postcount=5
So far this seems to be a BLACK edition problem only.
Click to expand...
Click to collapse
I recently bought a new SILVER edition htc one 802d and then i purchased a 32gb sandisk uhs micro sd.
Don't know why it killed the micro sd after 3 weeks, so it appears to be all htc one dual sim problem not the black edition only.
I've looked everywhere all over the internet to see if anyone has experienced this issue with not many answers. A while back my Micro SD slot would not read after a few events that I'm not sure which one may be the cause. I have a 32gb Sandisk Class 10 it works and was the proper format when I had it in the phone, it works fine in other devices and phones but not my phone. One event I had was that my phone got extremely hot one day when I was using it outside on a very hot day. Had to turn it off for a little while. But the other event is that I used the test 4.4.2 one click odin back in august. After those few things my micro sd slot never worked again I flashed to an official 4.4.2 using odin and have root but still not able to see the sd card at all. I want to know what I can do, phone is out of warranty. Is there a software issue or would I have to replace the Micro SD/Sim Slot. Is there anyone that would be able to fix this. Could I just replace the logic board, and If that is the case could I replace the logic /mother board with one from a tmobile phone, unlocked bootloader.
danny6787 said:
I've looked everywhere all over the internet to see if anyone has experienced this issue with not many answers. A while back my Micro SD slot would not read after a few events that I'm not sure which one may be the cause. I have a 32gb Sandisk
Click to expand...
Click to collapse
At least if it's an SD card issue, getting a replacement is as easy as going to http://kb.sandisk.com/app/answers/list/kw/microsd microsdhc/ opening a live chat and asking for one.
Class 10 it works and was the proper format when I had it in the phone, it works fine in other devices and phones but not my phone. One event I had was that my phone got extremely hot one day when I was using it outside on a very hot day. Had to turn it off for a little while. But the other event is that I used the test 4.4.2 one click odin back in august. After those few things my micro sd slot never worked again I flashed to an official 4.4.2 using odin and have root but still not able to see the sd card at all. I want to know what I can do, phone is out of warranty. Is there a software issue
Click to expand...
Click to collapse
Hard to say. Stock 4.4.2 should read the SD card, no matter what was there before. (If my many-times-bricked phone can still read the SD card with almost stock 4.4.2, yours should too.)
or would I have to replace the Micro SD/Sim Slot. Is there anyone that would be able to fix this.
Click to expand...
Click to collapse
It could be the slot. I'd ask around for recommendations where you live. Some shops are great, some just ruin your phone. (I know - I owned a few before I retired. The "techs" who just wanted to start repairing phones, with no training, made "dime a dozen" sound expensive. [Not that I ever hired one. You want to work for me, here's a phone that doesn't work. You have 30 minutes to call me from it.])
Could I just replace the logic board, and If that is the case could I replace the logic /mother board with one from a tmobile phone, unlocked bootloader.
Click to expand...
Click to collapse
Probably. Not "you", though - someone who's opened a cellphone before, at least a few times. One wrong pinched wire and you'll need another motherboard. (The battery has enough power in it, when fully charged, to weld the plastic case to the wooden table - figuratively speaking. Pinch a wire with full battery current available to ground and you'll let all the "magic smoke" out of the phone and it'll stop working.)
...
Well I have opened up a few phones before its not that hard. As far as getting a local shop to swap the slot out that my prove to be a little hard considering were I live the people here are 10 years behind technology. Plus I think it would cost me as much as just buying a new logic board. What I really want is to flash a new rom to my phone I can deal with the 32gb of storage, but everytime I upload a rom and flash it from safestrap my internal memory goes to 0mb available then I have to odin reflash even when I load up via adb, when I restart the phone pass safe strap I just go into a black screen never does anything after that. Right now I'm just running stock 4.4.2 root
Well I think I answered my own question, just bought an OTG cable, I forgot about using a flash drive