Related
Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
same here. no button combo method that previous worked is working now. :/
OP, did you see this thread: http://forum.xda-developers.com/showthread.php?t=775911
not working for me, but maybe it'll help you ... ?
Tremere said:
Hi all,
I was flashing between Jf6 and JH7 today, wanted to see if flashing JH7 via different methods would give me a 3 button fix. (If it did fix it then flashing via Kies mini didn't do the job)
Ironically it backfired when Odin froze and I flipped out the battery
(Hey, I've been at the dl screen before when it was doing nothing and it survived!)
I plug the USB in, I get the exclamation screen
Do it with volume keys pressed, still get it
Hold down the volume + power and the screen goes blinking between exclamation and blank. I've tried releasing power keys at each point in those screens
I even took a video incase I'm not doing it right. Odin is running in the background. No USB plug-in 'pings' from Windows, as you can hear.
Anything I can do?
btw my bat build date is 8/13.. that bad week
I'm in Australia (bought phone off ebay) so sending it back to the States will be a bit of trouble.. I'm hoping I can work something out with the ebay seller otherwise I'll buy another cappy and hope someone finds the jtag points I guess.
Click to expand...
Click to collapse
You may also want to try removing and then reinstalling the Samsung USB drivers on your PC.
I've verified there is simply no USB device being registered no matter what OS, the phone is just sucking power.
@The_Bishop: Did see that, exactly the same as yours, plug usb in, get that screen
Anyone want to be awesome and send my Capppy back to Samsung on my behalf?
best method that never dies when i was in your situation......
unplug usb, turn phone off, then put battery in, turn odin on, now hold volume buttons ONLY then insert usb in phone, you will see download mode with odin identifying the port;
hope it worked ?!?!?!?
Believe me I have tried everything. There is simply was and still is no way to enter recovery or download mode on this phone. Its hardware locked!
a little off topic, but how do i find my phones "bat build date" ?
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
YoungGun821 said:
a little off topic, but how do i find my phones "bat build date" ?
Click to expand...
Click to collapse
Is on the underside of the battery, one facing into the slot.
i.e 2010.08.13
terrigan said:
I had the exact same problem. If you do a battery pull.. hold down both volume buttons and plug the usb cable into the phone while it's hooked to PC then it bumps you into Download mode. I did the exact same thing you did and am running froyo at the moment.
Oh.. no power button.. just both volume buttons.
Click to expand...
Click to collapse
Done that. Exactly what happens in video. Both volume buttons down, plug in usb.. no response, just brick screen.
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
terrigan said:
I had the same problem.. the phone didn't register USB.. have you rebooted the computer? I believe i did that at one point.
Click to expand...
Click to collapse
I did try once or twice. From another thread it was also said to disable driver verification on windows startup for x64 machines. which I also did.
Basically I want to hear from someone who:
a) has a captivate that could never enter dl/rescue via buttons, only adb
b) captivate didn't trigger a plug in 'ping' from Windows until they ??
FYI this is a Macbook Pro, and I booted into Win7 x64 Pro for flashing.
Hi I have the same problem..
What I did was this rooted with one click.. loaded Cognition 2.1.6 all was good..I saw the froyo so I thought lets try it. so opened up ODIN put it in recovery mode. with ADB could never get it in the button way.. it started to load and it froze. I didn't disable voodoo and IS THAT WHY I AM STUCK? I have tried every combo changed drivers computer will not see the phone.. is it a AT&T Phone
IS there anyway to fix it?? or can someone make a program to fix this? I would make a big donation if they did!!!
Thanks Forum!!
Yeah I had it in adb mode to enter download mode, maybe that is why it won't start back up.
I've now given the phone to a local mobile repair business, if riffbox or someone comes out with a Captivate rescue soon its probably as a end result of me
I sent mine back to Samsung as well. BTW, I have a battery from 2010.08.12 so I might be in the same boat. Wish I'd have used one of my OEMs to see if that made any difference, but I did not. :/
I have the same issue.
Rooted my phone through adb, which was fine. Couldn't get into recovery/download modes with hardware before then.
Now my phone is bricked, and not detected or even charging via USB.
wtf
If the repair shop cant fix it try this:
1.) Remove Battery, SIM Card and External SD
OR
2.) Press and HOLD VOL UP AND DOWN with USB inserted and THEN slap in the battery.
This worked for me, for some reason inserting the battery last did the trick.
Let me know if anyone finds a solution to this I have tried it all and my computer will not detect my phone. Has Samsung blocked this in there firmware?
Did you try what I posted above?
yep nothing if I could get it to detect in command prompt I could force it but it won't... the button thing didn't even work when the phone worked!
So ....
Help !!!!!!!!!!!!!!!!!!!!!!!!!!
hmy captivate died after flashing Axura using clockwork
now I can not boot up the phone, unplug the battery for 15 Min and put it back but still the same can not boot up the phone....
please help
You need to figure out a way to get into Download Mode, use ODIN, and flash back to JF6. Once you have JF6 running, you can flash whatever rom you want again.
If you search, you'll see a bunch of posts on the different methods to get to Download Mode.
Goodluck.
Yes, I know if I get download mode I can flash whatever rom, but the problem is that the phone completely dead nothing shown in the screen, I have tried the following
1- try the combination of Vol down + Power
2- try the combination of Vol up + Vol Down + Power
3- try Vol down and then connect USB
4- try Vol down + Vol Up and then connect USB
all these while opening ODIN
also I tried this on both windows 7, and windows XP.
do you have any other suggestions to do.
please help
Still have the problem, need heeeeeeeeeeeeeeeeeeelp please
How did it exactly die? It'd be useful for people who may know a solution. I've heard of JIG a few times.
you get the little home lights on the bottom of the phone to light up at least?
Also.. does the computer recognize the device?
If not and it's completely black screen and you don't even feel it vibrate while booting? Its toast.
But.. try doing the battery/sim card pull - hold down both volume buttons plug in the USB and jam in the batter and see if that works.
Or.. to the ATT warranty center you shall go.
I was flashing Axura rom using clockwork recovery, and after complete the installation and start reboot this back screen comes on, now not booting at all
Odin not recognize the phone, or even the computer does not detect any connected device,
I tried pull the battery, wait for 15 min then connect the USB, hold vol up, down and power keys then put the battery back while holding these three keys nothing happen, the screen still black and the computer not detect it.
I tired all ways but nothing works with me.
Now I think it is complete died, Even I tried the hair dryer trick but nothing works.
some posts talk about JIG
How this JIG works and how to do it?
up for heeeeeeeeeeeeeeeeeelp
hzeid said:
I was flashing Axura rom using clockwork recovery, and after complete the installation and start reboot this back screen comes on, now not booting at all
Odin not recognize the phone, or even the computer does not detect any connected device,
I tried pull the battery, wait for 15 min then connect the USB, hold vol up, down and power keys then put the battery back while holding these three keys nothing happen, the screen still black and the computer not detect it.
I tired all ways but nothing works with me.
Now I think it is complete died, Even I tried the hair dryer trick but nothing works.
some posts talk about JIG
How this JIG works and how to do it?
Click to expand...
Click to collapse
USB Jig will trigger the phone into Download mode.
******Soldering Required******
http://forum.xda-developers.com/showthread.php?t=819551
****Solderless version****
http://forum.xda-developers.com/showthread.php?t=841512
I followed JIG solution, connect resistants of 301K on pin 4,5 on mini usb head, nothing works still black screen, no at&t log nothing
help any new suggestion
try charging the phone for a few hours, if possible try a different battery.
also you may be in download mode with a black screen. i had a bad crash once from too much overclock or a corrupted kernel flash with the manhatten project 1.6ghz kernel. it corrupted the image files for bootup and download mode, my startup screen was garbage and had a black screen for download mode. but download mode still worked. start odin, it may still show device connected.
I did connect the JIG for 10 sec then disconnect it, then connect the phone to the computer while ODIN open, but nothing happen the computer still not detecting the phone, also the screen still black, it does not even any sign of responding except it get heated when connect it to charger.
guys as posted in other thread, will reward 75 US$ for who will help me getting my phone back to life
if you got the phone through at&t, you might as well just go exchange it for a new one. the people there won't be able to determine if you've voided your warranty if they can't boot your phone either.
sorry I did not got the phone from AT&T, I bought it from Ebay so I can not send it back to them
I've been reading forums all day long looking for answers but I can't seem to find a solution, so my apologies if someone has a solution in a thread that I missed but I couldn't find anything.
I have Rogers Captivate which I had applied the One Click Lag Fix that worked great. I then decided to flash a custom rom with Odin. In the middle of the flash, my pc lost power (battery ran out, forgot to plug it into the wall) and the bar on my Captivate showing the progress stopped. After I turned the computer back on, I turned off my phone (since it was stuck an I thought it was a good idea) and tried to turn it on with no success.
As far as I can tell, it's COMPLETELY dead.
Here's everything I've tried:
- ALL (and I mean ALL) button combinations
- There's no power bar, absolutely nothing showing
- I've taken sim and battery out and tried connecting to the pc, no luck
- I've tried letting it charge although the screen is dead (meaning black) and the soft keys don't light up so I have no idea if it's charging
- When I plug the phone into my pc, it doesn't even detect it
- Can't get ANYTHING to show up on the screen. I hold power, it doesn't turn on. I hold Vol up and down and nothing.
I don't know if there's anything on the board I can do to reset or something. Is my phone completely toast? If so, I'll have to resort to getting a replacement through the 1 year manufacturer's warranty which sucks, but oh well.
Thank you all for any assistance you can provide. I would hate to go back to my iPhone 4 ((
AZ
Did you try pulling battery, then holding Vol+ and Vol- and plugging in USB?
Have you tried a USB jig?
I had to disconnect my phone mid-Odin a few times before. I was able to use a JIG to get back into Download Mode and restore it to a working state. Might wanna try that!
Dungeon47 said:
Did you try pulling battery, then holding Vol+ and Vol- and plugging in USB?
Have you tried a USB jig?
Click to expand...
Click to collapse
I think this guy's phone really is toast though - no activity, nadda?
The only other thing I can think of - is make sure the USB cable is plugged directly into your computer's motherboard USB Ports.
Then try the above - pull out sime batt etc... plug in the USB with the battery out - then jam the battery back in while holding down the volume buttons.
If this doesn't work or the Jig.. Warranty Time with AT&T (Happy Times )
I would say the jig is worth a shot, I have seen several people say they came back from a black screen with the jig.
If you are just getting a black screen when you try to turn it on then the phone is most likely done. I know it's too late but it is extremely important that when flashing your phone that there is no chance of loosing power to your compuer.
I would still suggest to try the JIG option if you haven't already. Each bricked phone acts differently. My first phone I was able to get into download mode with the JIG but even after flashing it 3 times it still would be stuck on the AT&T logo loop. Likely because of a hardware related issue. I would check with your carrier and see what you options are after trying to use a JIG. Or you can call Samung and they might be able to repair the phone for a couple hundred. Which is still cheaper then paying $400 for a new one.
I had a similar issue where I got a purple screen flashin stock with odin...and then phone acted ''dead'' no response on any end...what I did was take take sim out and battery and did the volume down and power while putting in batter after every attempt with all other button attempts and putting usb in
About ten seconds the time it takes the art screen in my case to flash and after about fifty attempts it went into d.l mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Mine got stuck in the white ATT logo loop once, and it just took many, many tries to get ODIN to recognize, but it eventually came around, and has been great ever since. If it is really bricked, you have nothing to lose, so you might as well go hardcore.
Same thing happen to me yesterday! And the jigg saved my phone. Thank you jigg
Sent from my SAMSUNG-SGH-I897 using XDA App
Okay I was using odin one click it was at rebooting device after it completed pushing stock onto the phone thats when I discounted the usb.... should have waited two secs I know but now the phone doesn't seem to get past the att world phone screen keeps looping over and over I have tried all the key combos different times and ways, vol up and down being held doesn't get to download mode the screen remains black plunging in seems to get to charge mode where even plunging into the wall charger it loops trying to calculate the battery status... any method I haven't tried... I did get it to boot once full and was usable didn't think to redo odin at the time and restarted back to this mess...tried three different jigs using the 100k 5% X3 even through its not a full brick due to the button combos gotten no where. Please Help
Search the forum to build a jig in order to get into download mode. Or you may need to buy one just in case in the future.
http://cgi.ebay.com/ws/eBayISAPI.dl...69977&ssPageName=STRK:MESELX:IT#ht_623wt_1139
Try this:
Open Odin and plug your cable into your computer but not your phone yet
Pull battery on phone and put it back in
Hold both volume buttons down and then plug your phone in
It should go into download made and you can reflash the stock ROM
Can anyone please help, i have the exact same problem. No matter how i try to enter download mode, it just gives me a charging sign and when i start my phone, it goes into an infinite boot loop.
Try this:
1. Remove battery from phone, SIM card and MicroSD card (if you have one)
2. Wait AT LEAST 10 seconds with your phone in this state
3. Hold Volume Up/Down, don't let go
4. While holding the volume keys, insert the battery
If this worked, you should be in Download Mode almost instantly.
There are a lot of key combos for Download Mode, this is just one of them. If all the button combos don't work, you need to build/buy a JIG to force your phone into Download Mode.
norcal einstein said:
Try this:
1. Remove battery from phone, SIM card and MicroSD card (if you have one)
2. Wait AT LEAST 10 seconds with your phone in this state
3. Hold Volume Up/Down, don't let go
4. While holding the volume keys, insert the battery
If this worked, you should be in Download Mode almost instantly.
There are a lot of key combos for Download Mode, this is just one of them. If all the button combos don't work, you need to build/buy a JIG to force your phone into Download Mode.
Click to expand...
Click to collapse
Ahah Thats the same exact steps I was able to get the phone to boot that one time instead of the up down I was still attempting it to get past the loop holding the power button instead using those steps, if I had know it would have been one of the only times I would see it in there I would have pushed it to download with adb though...
can't test getting it to download mode now took it back fit the description of the standing on/off issue with the device still honored by warranty. And I wouldn't have posted without searching everywhere to make a jig, I made three of them though I noticed it still didn't get to download mode. I made sure that the last two jigs were done correct. Think that when it was disconnected from odin it wasn't done finalizing after the stock push gah >,< live and learn and do something else to the cappies XD.
Thanks for the link placing an order just in-case ~whistles looking around then side to side pushes another rom~ lalala
To offer my own advice if it ever happens again, what I've been able to do is:
1. Pull the battery out
2. Put it back in
3. Open Odin
4. Hold Both Volume Buttons (without holding the power button)
5. Plug the phone back in
It went immediately into download mode for me, Odin managed to time out several times while I was trying to flash a co-worker's Captivate to the official Froyo leak. One of those times I couldn't even get the phone to come up with any screen. I really do think this thing cannot be bricked.
BeowulfShaeffer said:
That has been my experience so far, too. I've "bricked" twice, once with an "all black" screen, and once with the phone-!-computer screen. I've yet to need a jig, though I thought I may have needed it last night when I got the "all black" screen.
Keep trying the different button press methods to get into download mode. It took me 4 attempts to get from "all black" to "phone-!-computer" to a happy robot digging away.
Click to expand...
Click to collapse
if you are out of luck, you may have to build a jig or buy one online.
http://cgi.ebay.com/ws/eBayISAPI.dl...69977&ssPageName=STRK:MESELX:IT#ht_623wt_1139
Ive used odin before changing roms and have gotten to download mode with combos on my last cappy before that night (dramatic music) en ways..
did some more digging on this bad ass info and learning community "XDA" hehe as to how it got the way it did, I found out I was updated with the new patch when I sent it for screen change to this shop, so...using odin one click with this creates a hang time to where it looked like it was finished after pushing jh6 (which was totally off should have used odin 3 and pushed jh2 then clockwork update to jh7) so thats when I disconnected (second noob mistake of the situation) basically blowing the finalization out and key combs for recovery and download mode. and im guessing the jig was made wrong too at this point >,<.
Oh
wmason92 said:
Can anyone please help, i have the exact same problem. No matter how i try to enter download mode, it just gives me a charging sign and when i start my phone, it goes into an infinite boot loop.
Click to expand...
Click to collapse
If you cant get your jig to work take it in to warranty (if your water inicators are sound and no physical damage) and say its power cycling on off at random times (which is true.. ) and it did it when you were sync to mini kies, did it an hour after the OP heh good luck
and I have yet to see the infamous yellow pc sign >,> <,< it can stay on the yellow brick road... thanks for the responses btw
Well the same thing happened to me and i got stuck with in an unlimited boot animation. Ive trying everything key combo possible and ive tried a jig but it just makes it reboot, and yes im sure im touching the right pins. If anybody can help with this dilemma i would really appreciate it. I want to return with warranty but my phone has a custom boot animation so im sure att probably wont accept it if they notice it.
wmason92 said:
Well the same thing happened to me and i got stuck with in an unlimited boot animation. Ive trying everything key combo possible and ive tried a jig but it just makes it reboot, and yes im sure im touching the right pins. If anybody can help with this dilemma i would really appreciate it. I want to return with warranty but my phone has a custom boot animation so im sure att probably wont accept it if they notice it.
Click to expand...
Click to collapse
Purchase jig from ebay, or google and try igo jig.
If your phone is turning on with jig you are not touching the right prongs. I know, I know it is not easy, but unless it if touching just right, it can turn your phone on.
Holy ******** i got it to download mode! For some reason i kept touching the same pins and nothing would happen. After about readjusting for about 5mn it finally worked!!!!
It has to be just so. Happy to hear
Wait, now its in download mode but my computer keeps saying usb device not recognized.
wmason92 said:
Wait, now its in download mode but my computer keeps saying usb device not recognized.
Click to expand...
Click to collapse
That happens try a different usb port or just borrow someone else computer, I used my networking classes computer my laptop was doing the same thing when I was change roms.
Changed the title to fit the issue, this is not a soft brick this is a boot brick that can affect the charge indicator in power off state as well. So whats the difference the soft brick is when you flash a rom incorrectly and you get the att world screen constantly staying on, the key combinations still work when the phone is like this.. in the case with a boot brick the att screen cycles over and over and the jig may or may not work I haven't been able to fully test it here in this state I have seen a packager attempt to finish once on the recent one but all the key combos I could find didn't function my noob guess is the phone forgot how to ride a bike (meaning is hasn't connected keys to recovery that was being flashed or hardware to there states without being booted normally) ultimate fix is if its in warranty (meaning no physical damage or water) take it back for power on off. the soft brick i've seen before and have fixed with odin 2-3 three times, and ive seen a blown kernel type too where keys and odin fix up like new.
wmason92 said:
Well the same thing happened to me and i got stuck with in an unlimited boot animation. Ive trying everything key combo possible and ive tried a jig but it just makes it reboot, and yes im sure im touching the right pins. If anybody can help with this dilemma i would really appreciate it. I want to return with warranty but my phone has a custom boot animation so im sure att probably wont accept it if they notice it.
Click to expand...
Click to collapse
I have the same thing happening to me. Att boot screen, then it loops on the ROM logo, over and over. I get 1 vibrate then 2 following also. I purchased a Jig on ebay but it just keeps rebooting the phone, doesn't get it into download mode.
glaze76 said:
I purchased a Jig on ebay but it just keeps rebooting the phone, doesn't get it into download mode.
Click to expand...
Click to collapse
Very odd - I've never heard of that with a jig.
glaze76 said:
I have the same thing happening to me. Att boot screen, then it loops on the ROM logo, over and over. I get 1 vibrate then 2 following also. I purchased a Jig on ebay but it just keeps rebooting the phone, doesn't get it into download mode.
Click to expand...
Click to collapse
Have a link to which one you have? It sounds like the solder points on the jig were a little weak. This can happen if they aren't good welds. If you want give one of mine a shot. I'll refund you if it reboots your phone...
Buy one HERE...
I had a boot brick happen to me just the other day. I was running Andromeda 1.1 with stock kernel & modem, and tried to tinker with swapping the AT&T boot screen using connexion2005's video on the subject (NOT insinuating any blame at all, his videos are fantastic).
I tested it successfully the first time, then flashed back the i9000_param_lfs, and pushed a new image to the device again (everything was exactly the same, with the exception of the boot_screen.bat script not making the phone ask for superuser approval while pushing the new logo_ATNT), and everything looked ok.
Reboot device, and...boink.
Black screen, no image at all on power on, only charging screen when usb cable connected. ADB, nothing. 3 button, nothing. Vol up+down, remove battery, insert usb cable, do hokey pokey, nothing. 5 attempts at the 100k resistor jig, for hours, nothing. No download, no recovery. Seems like the phone was toast.
Strange how I had just done this successfully earlier in the day, to now having it completely hard brick this phone.
I ended up taking the phone back to a local warranty center, and they swapped it (1008) for a 1010 (gps works fantastic on this one, btw)...I just hope there's no bill coming if they find out it was rooted and flashed. *crosses fingers and uses any and all karma*
Any ideas what happened? Did I scramble this things boot loader? I've heard how hard it is to fully brick this phone, and looks like I succeeded. How lucky.
I'd just like to know what went wrong so when I (or anyone else) root and flash next time, the chances of this happening are reduced (or better understood).
Thanks
So the power button on my phone went out, which made getting to download mode and flashing back to stock a lot of fun, let me tell you. I eventually had to buy a JIG.
Anyway, I run ODIN to flash back to stock. It completes and as I'm disconnecting the cable, the battery falls out. (I was able to get into download mode because CM7 auto boots when it had power, something stock does not do.)
So it's flashed back to stock, it didn't have a micro SD card in... but am I right in thinking that the internal cards contents are still there? I.E. My pictures and apps and... the cyanogenmod nightly zip I was using? I can't hit the power button to turn it on so I can't check.
Needless to say, without the power button I can't get my phone back on (Unless a wizard here has an idea?), so my question is... will the files still be there and if they are, how hard does Samsung check these things for voided warranties? Anyone got any experience with their returns? The AT&T store guy says they only reject warranties for water damage, but I didn't exactly volunteer that I had flashed my own rom. If I'm likely to get a $400 hit on my cell bill, I'd rather buy a newer unlocked phone.
TLDR: warranty voiding files might still be on unbooting phone. Will Samsung care?
Do you have an att service center near you? Luckily I did and I just walked in and they checked it a bit (tested it for like 20 minutes). After a quick conversation, the actually just replaced my phone. I told them I wanted a phone with working GPS.
Now if you have to mail it in, that's maybe another story.
It will be mailed.
I assume your jig still gets you into download mode, no? If so, use heimdall/odin to flash something and set it to auto reboot. You could flash something as small as the kernel or maybe just go back to stock once again.
I also want to say that heimdall has an option to try and kick you our of the "phone --!--PC" state and when I tested it while in download mode it just rebooted the phone.
These may be a few ways for you to kick the phone on to let it boot so you can clear the internal SD.
Also, when I take out the battery, insert the USB cable and hold down both volume rockers and put the battery in, I'm kicked into download mode. Perhaps yet another way to turn your phone on?
Use your jig to get into download mode, the use the heimdall one click unbrick in this post
http://forum.xda-developers.com/showthread.php?t=1153310
It will reboot your phone from download mode.
I'm certain the JIG would work, if the phone would power on. Without a functional power button (or a rom that auto boots when powered like CM7), I don't think I can get to DL mode.
bobby98989 said:
I'm certain the JIG would work, if the phone would power on. Without a functional power button (or a rom that auto boots when powered like CM7), I don't think I can get to DL mode.
Click to expand...
Click to collapse
You don't need use the power button to get into download mode. Just plug the jig in and your in download mode. also if your phone has captivate bootloaders just hold down the volume up/down buttons and plug in usb cable to a pc wait about 3 seconds and you should be in download mode, no need to touch the power button to get into download mode.
Ah, well I get no power up from JIG or USB cable hooked to PC holding vol up, vol down, neither or both. Nothing on the screen at all.
bobby98989 said:
Ah, well I get no power up from JIG or USB cable hooked to PC holding vol up, vol down, neither or both. Nothing on the screen at all.
Click to expand...
Click to collapse
plug your phone into a wall socket to charge the battery and leave it for a while, the come back and check to see if you can feel the battery getting warm. If it does get warm try the jig again. If it doesn't get warm you may have something else wrong then just the power button.
If there is nothing else hardware wise wrong with the phone besides the power button and your boot loaders are not corrupted (and as long as nothing is wrong with your jig) the jig should put you into download mode every time.
charged phone, battery didn't warm, but area just above it did. Tried booting with JIG and USB cable and all combinations of volume buttons, to the same black screen.
Sounds like you should go ahead try with your warranty replacement.
But, if i were you i would try an going to an att store or service center, sometimes there with a hardware defect like your power button they will swap the phone right on the spot quick and easy. if not, the worst they will tell you at the store is to send it in for a warranty replacement, no harm in at least trying.
Yeah, I went to the store and best they did was watch me talk to the warranty people on the phone.
The disconcerting thing with the return is that they send me a phone, then I send them mine and if they have a problem $400 magically appears on my bill and there's nothing I can do about it.
If I can get it warrantied, great. If I can't, I'd rather spend $400 on a newer, better phone (instead of a factory refurbished version of the same phone).
I'm surprised there aren't more people with returns experience here...
I did a return for my wife's captivate at the att store. Her phone had random soft reboots. They did not even look at her phone, and just swapped it out with a new captivate.
Sent from my SGH-I897 using XDA App
My cappy was bricked because Odin failed while flashing the boot-loader.....so no boot-loader or anything was on there. I went into the att service center and told them I realized it was off and I couldn't get it to turn back on. Every question they asked me I just said I dunno im not sure. The guy said let me trouble shoot this to see whats wrong....lol he came back and they gave me a new one on the spot.
It seems that you really don't know whats wrong with it so there is no morality issues........IF there were any before lol.
bobby98989 said:
Yeah, I went to the store and best they did was watch me talk to the warranty people on the phone.
The disconcerting thing with the return is that they send me a phone, then I send them mine and if they have a problem $400 magically appears on my bill and there's nothing I can do about it.
If I can get it warrantied, great. If I can't, I'd rather spend $400 on a newer, better phone (instead of a factory refurbished version of the same phone).
I'm surprised there aren't more people with returns experience here...
Click to expand...
Click to collapse
I've had two actual experiences. The first was a soft brick. This happened before anyone really knew about how to build a JIG. This happened within the first 30 days. I was basically in your boat, I had a bunch of crap on the internal SD card and I even still had some i9000 firmware still loaded to the phone. I exchanged it last October and never had any backlash.
The second time I messed up /efs. I was able to flash it back to stock and master clear the phone to remove traces that I had done anything to the phone. This time I dealt with samsung directly. They paid shipping both ways, made sure my phone was not water damaged and actually ended up replacing the mainboard (they seem to do that to fix a ton of issues).
Both experiences I mailed in my phone. I never dealt with a local service center.