Database Develop

Seriously this phone is pushing my patience...

my phone has been giving me problems for the last few months now non stop. first that red light crap on the power button...now this....
My phones screen gets all distorted in Landscape mode. if i flip open my keyboard, it gets all scrappy, then i have to pop out the battery and restart in portrait...it runs fne until i flip the keyboayd out. freezes up and all that crap starts...why is this happening? how do i fix this? ive had the phone for 7-8 months not sure...but WTF man its still not even 1 year old....talk to me somoene is this just a piece of junk i bought? is there a fix? anyone else have this problem? ARRRGGGHHH!!!!!

what ROM are you using?
you should make a backup and then try a hardreset

If hard reset or new ROM flash will not fix your problem, then it is the flex cable that is at fault. I recommend replacement and had it done for my customers. Cheaper, albeit a temporary solution is to attach a thin sticky tape cut to shape to the flex. If you have no idea what I am talking about, then it is the job better left to professionals.

as enigma1nz stated, its the flex cable... i too had this problem, but i didnt buy a new one...
what happen is the sliding wears off the black coating on the wires and expose them to the interior parts, its like rubbing the two jumper cables together, it will spark...
what i did was cover the silver part with sticky tape, that solved the trick

Speng2 said:
ive had the phone for 7-8 months not sure...but WTF man its still not even 1 year old....talk to me somoene is this just a piece of junk i bought?
Click to expand...
Click to collapse
I have owned my X1 for a year now, and yes it is now a piece of junk compared to other phones currently out.
Get a Dell Streak and be satisfied already!

It is not a problem affecting Xperia only, but rather something we call 'All slides disease', it affects all slide form factor phones due to vulnerability of the flex cable. It happens due to sheer act of someone using the phone as intended - sliding it up and down, answering calls in some phones, accessing the keypad etc. It does not mean Xperia is crap, just the downside of a particular form factor. Next one on the list of form factors requiring repairs are flips (clamshells). With a bar form factor very little can go wrong, apart from actual physical or water damage. With the advent of large-screened touch phones, as you can imagine, it's the screens that sustain the damage. Iphones are vulnerable in particular.

Tiny bulge under SIM slot after 6 days

I just noticed this evening that I have a little bulge under my SIM slot. The rubber protrudes about 1mm, and is about 1/4" long. It happens to be exactly above where my ring finger rests when I hold my phone, as if my finger (over the past 6 days) has forced the separation. It's nothing a bumper or case won't fix -- but I don't have a bumper or a case.
Hopefully it's an isolated case **He naively says starting at the screen lift on his Nexus 7**

ralexand said:
I just noticed this evening that I have a little bulge under my SIM slot. The rubber protrudes about 1mm, and is about 1/4" long. It happens to be exactly above where my ring finger rests when I hold my phone, as if my finger (over the past 6 days) has forced the separation. It's nothing a bumper or case won't fix -- but I don't have a bumper or a case.
Hopefully it's an isolated case **He naively says starting at the screen lift on his Nexus 7**
Click to expand...
Click to collapse
I dont see it. Can you get a closer picture?
Sent from my GT-P7310 using xda premium

ctowne said:
I dont see it. Can you get a closer picture?
Sent from my GT-P7310 using xda premium
Click to expand...
Click to collapse
Buy specs mate. Or get a better monitor.

Oh nevermind I see it now. I would send it back. He said under so i was looking under. That is more like above it.
Sent from my GT-P7310 using xda premium

Looks like the rubber band warping. Not sim slot.
I ordered a nexus 4 and all I got was bo.

Yeah, that looks like a clear defect. I'd definitely have Google replace it.

I've had mine for over a week. It doesn't have that issue. Thank God.
That's a definite defect. Get a replacement ASAP.
Sent from my Nexus 7

At least it still works mine is lifeless

Hi
Might just be clip on the back cover that hasn't engaged. Can you clip it back in by squeezing the back at that point against the front?
Regards
Phil

PhilipL said:
Hi
Might just be clip on the back cover that hasn't engaged. Can you clip it back in by squeezing the back at that point against the front?
Regards
Phil
Click to expand...
Click to collapse
Nah, it's surprisingly stubborn. I've put quite a bit of pressure trying to "pop" it back into place to no avail. I really do hope this isn't a mass problem. I'm going to do an RMA (also have the rattle & hiss). The next one I'll have a case from Day 1.

Hi
ralexand said:
Nah, it's surprisingly stubborn. I've put quite a bit of pressure trying to "pop" it back into place to no avail. I really do hope this isn't a mass problem. I'm going to do an RMA (also have the rattle & hiss). The next one I'll have a case from Day 1.
Click to expand...
Click to collapse
The rattle is just the plastic lens in the camera related to auto focus, a lot of phones have the same rattle, search for "camera rattle". Hiss is caused by the DC-DC power converters in the phone, it's a known issue with low power equipment such as mobile phones, just do a search for the terms "dc dc converter audible noise". These are not faults, just side effects of the technology that most people will ignore or not notice.
Such is the variable nature of these components you may get another phone that appears better or just the same or even worse, but very likely the rattle will always be there as that is just how the cameras are at rest with nothing powering the magnetic servo of the lens.
Obviously the bulge in the side of the case shouldn't be there, certainly a reason to get it replaced.
Regards
Phil

OP - I finally received my phone yesterday and noticed that I too have the same little bulge. Mine is on the opposite side of the phone. It does look like it's just a clip that didn't engage. However, like you, I tried to push it in to no avail. Since there is nothing else wrong with my phone at all I am holding off on sending it in for an RMA because I'd be afraid to get a phone with worse defects. This one is so minimal that I can live with it. Especially since I REALLY have to look for it to see it.
With that said, I'm contemplating just removing the backing, which I have read is super easy (just remove the two screws at the bottom and the sim tray and it pops off). I was thinking about doing this to inspect that little section to see if something is just protruding a tiny bit that can be easily corrected. I'm going to wait until I see others have successfully removed the backing before attempting it myself.
Just wanted to let you know that you are not alone.
UPDATE: I called Play Support and told the rep about the issue. He said I'm not the first person to have the small bulge and recommended an RMA since it's considered a defect so I went that route.

I returned a Nexus 7 that had the same problem. There was no screen lift, so I hesitated, but after taking the back off and seeing that internal components were pressing the bezel outwards (and the screen had been attached onto the already-bent bezel, leaving the bulgey spot without any adhesive to speak of even if I could get the bezel straight) I decided I didn't want to wait for dust to start creeping in and took it back. Glad I did, my replacement was perfect. Hope you get the same result with a new N4 (whenever they get around to having a new one for you :| ).

Damn I have the buldge to Don't know if i'm just noticing or if it's been there all along. I've decided i can live with the tiny amount of hiss in the ear piece and the camera rattle (which i've been told and believe is normal and not a defect). Can't decide if this is something that'll worsen over time or just live with this in fear of getting a device with worse issues. DOH

marnel47 said:
Damn I have the buldge to Don't know if i'm just noticing or if it's been there all along. I've decided i can live with the tiny amount of hiss in the ear piece and the camera rattle (which i've been told and believe is normal and not a defect). Can't decide if this is something that'll worsen over time or just live with this in fear of getting a device with worse issues. DOH
Click to expand...
Click to collapse
Don't fret. I called Google about this issue since I have it too. The rep told me he had a few reports of this and recommended an RMA for it. It won't get worse but if it does bother you just call and have them send you a new one. The process is really easy. I've done this in the past with other Nexus devices as well. They send you a new one within 3-5 business days and put an auth charge on your card for the full price of the phone. Then, when you get the new phone you put the old one in the box and send it back to them. When they receive the phone they remove the auth hold. This way you are never left without a phone.

Anyone opened theirs up?
Sent from my Nexus 4

Disable screen wake up when charger is connected on tw rom

Is there a way to Disable Screen Wake up on Charger is Connected on a TW ROM?
I know its possible on some Cm based Rom..
My problem is my usb charging port had a short circuit and shows charging even if its not connected to a charger..
It wakes up the phone and says its connected then it shows not connected.... connected again(screen turns on) and phone heats up all day long.
Samsung service centee is very far from my place so im just finding some workwaround for it..
And I dont want to dismantle my phone myself because I might get it worse...
Help please brothers..

I don't know how mechanically inclined you are, but mine did the same thing a few months ago. I ordered a new usb/charge
board off ebay for less than 20 bucks & did it myself. Granted, I've been a repair tech for over 35 years, but there were several
youtube videos that show you screw by screw how to change it. The replacement board also came with a screw driver (torx)
& a plastic pry tool to get the bezel off the device. Took longer to watch the video than it did to replace it.
If you have any mechanical aptitude, give it a go. Being in my mid 50's, with the bifocals, the screws are pretty small, but
I took the torx driver and rubbed it against a magnet to make sure I wouldn't drop any of the screws
noteandfound said:
Is there a way to Disable Screen Wake up on Charger is Connected on a TW ROM?
I know its possible on some Cm based Rom..
My problem is my usb charging port had a short circuit and shows charging even if its not connected to a charger..
It wakes up the phone and says its connected then it shows not connected.... connected again(screen turns on) and phone heats up all day long.
Samsung service centee is very far from my place so im just finding some workwaround for it..
And I dont want to dismantle my phone myself because I might get it worse...
Help please brothers..
Click to expand...
Click to collapse

p51d007 said:
I don't know how mechanically inclined you are, but mine did the same thing a few months ago. I ordered a new usb/charge
board off ebay for less than 20 bucks & did it myself. Granted, I've been a repair tech for over 35 years, but there were several
youtube videos that show you screw by screw how to change it. The replacement board also came with a screw driver (torx)
& a plastic pry tool to get the bezel off the device. Took longer to watch the video than it did to replace it.
If you have any mechanical aptitude, give it a go. Being in my mid 50's, with the bifocals, the screws are pretty small, but
I took the torx driver and rubbed it against a magnet to make sure I wouldn't drop any of the screws
Click to expand...
Click to collapse
I dont know anything about that.. my job is completely off that..
Well I can completely open a man's abdomen and cut some cancer cells that have metastasize but cant do some opening phones and stuff..
<<<The CRACKS on my NOTE shows how often it KISSES the FLOOR>>>

Amazing isn't it. What I do (electronic service tech) is easy for me, but what you do would scare the hell out of me.
Having someones life in your hand... kuddos!
noteandfound said:
I dont know anything about that.. my job is completely off that..
Well I can completely open a man's abdomen and cut some cancer cells that have metastasize but cant do some opening phones and stuff..
<<<The CRACKS on my NOTE shows how often it KISSES the FLOOR>>>
Click to expand...
Click to collapse

[Q] S4A USB Flap/Seal

Hey all,
i have an issue with my usb flap. I can close it, and the phone allready survived some water. But as a mechanical engineer i am not happy with the seal for the usb port.
I try to explain it: when i close the seal it keeps popping out a little bit. Depending on which side i press in first (Top or bottom) the other one pops out about 0.5 to 1mm. In the end the flap seems to feel more comfortable in the position where the top side stays out. Some employee told me that is normal, i had nothing to compare so i have to believe him for the moment. Thats why i ask you guys if your device has the same or not.
Thanks for your help. Sorry for my english.
Greatz

I have the same problem currently. This is my second Active. The first didn't do this. I'm considering a warranty replacement, but I don't want to spend the time setting everything up again.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4

Open the flap, then pull it just a tiny bit so the side section is exposed (you pull in the direction of the power button side of the phone, so to the right just a bit). When you insert it, you need to slide that section back into the area it's designed for, pressing down on the left side somewhat firmly (left in terms of you staring at the screen). When that's done, press down on the right side so it's flush - so the whole cover is flush with the bottom of the phone.
There's actually two "levels" of it being closed: the first is close to being flush but not completely; this level kills the water-resistant feature and your phone too if you don't seal it properly and dunk it.
The second level is when it's truly in place, and you can actually feel it when it "snaps" into that position - when it's truly in place the cover is totally flush with the bottom surface of the phone.
Just something I had to come to understand myself in my short period of time owning the GS4A.
Might be helpful info, might not, but that's how I've come to understand it and seal that USB port cover personally without issues.

My cover has been getting worse. I can still get it to snap into place, but I have to get it positioned just right or it does not seal completely. I think that it will probably break off soon and become lost. Does anyone know if the seal is easily replaceable? I haven't seen the part listed on the parts thread. It is frustrating to think that the only option may be to send it back to replace a 10c part. Considering the design intent of this phone, I certainly thought that Samsung would have developed an inductive charging back long before the USB seals would start wearing out.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4

Hear's another thing (pun intended) about that microUSB port cover: it works in conjunction with the speaker as well meaning that whole bottom section is a "woofer" port enclosure, basically, taking the term from speaker enclosure technology.
When the cover is in place and sealed properly, you get "more bass" (ok it ain't much but it's very noticeable to me) when audio is coming from the speaker. If you remove the cover while audio is playing, voila, it turns all tinny and full of nothing but very high end frequencies. And when the cover is in that first level of being attached, you still will hear mostly high end frequencies - only when it's properly in place and the seal is in effect does the audio tone change, at least in my situation.
Just something I noticed, thought it was somewhat cool the first time it happened, I thought I had broken something when the audio took on that high tinny and harsh quality.

Mine broke last night and called samsung the tech guy telling me thats the fist time that the seal port cover broke.and I have to wait 2weeks to get it done.should I go att instead but not sure they will replace this thing...

pink_lady03 said:
Mine broke last night and called samsung the tech guy telling me thats the fist time that the seal port cover broke.and I have to wait 2weeks to get it done.should I go att instead but not sure they will replace this thing...
Click to expand...
Click to collapse
I'd call AT&T's warranty line.
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4

br0adband said:
Open the flap, then pull it just a tiny bit so the side section is exposed (you pull in the direction of the power button side of the phone, so to the right just a bit). When you insert it, you need to slide that section back into the area it's designed for, pressing down on the left side somewhat firmly (left in terms of you staring at the screen). When that's done, press down on the right side so it's flush - so the whole cover is flush with the bottom of the phone.
There's actually two "levels" of it being closed: the first is close to being flush but not completely; this level kills the water-resistant feature and your phone too if you don't seal it properly and dunk it.
The second level is when it's truly in place, and you can actually feel it when it "snaps" into that position - when it's truly in place the cover is totally flush with the bottom surface of the phone.
Just something I had to come to understand myself in my short period of time owning the GS4A.
Might be helpful info, might not, but that's how I've come to understand it and seal that USB port cover personally without issues.
Click to expand...
Click to collapse
Both of the ones I have are the same as this. I've had to really explain to the missus that she can't just 'sorta' close it otherwise it's not waterproof any more. I haven't had any issues yet but as soon as that wireless WiQiQi proves itself battle worthy (or at least doesn't mess up the seal on the back) I'm putting in for 2 of them ASAP. I haven't used any sort of wireless charging yet but I'm pretty confident that I won't ever buy a phone that doesn't have it ever again, same as I won't ever buy a non-waterproof phone after the Rugby Smart and the S4A have proved themselves worthy.

br0adband said:
Open the flap, then pull it just a tiny bit so the side section is exposed (you pull in the direction of the power button side of the phone, so to the right just a bit). When you insert it, you need to slide that section back into the area it's designed for, pressing down on the left side somewhat firmly (left in terms of you staring at the screen). When that's done, press down on the right side so it's flush - so the whole cover is flush with the bottom of the phone.
There's actually two "levels" of it being closed: the first is close to being flush but not completely; this level kills the water-resistant feature and your phone too if you don't seal it properly and dunk it.
The second level is when it's truly in place, and you can actually feel it when it "snaps" into that position - when it's truly in place the cover is totally flush with the bottom surface of the phone.
Just something I had to come to understand myself in my short period of time owning the GS4A.
Might be helpful info, might not, but that's how I've come to understand it and seal that USB port cover personally without issues.
Click to expand...
Click to collapse
Mine unfortunately never snaps. I can push it to the desired position, but it never stays there.
So I have to replace it.
Hate this just because of one little part...
From mechanical view this problem seems logic. The seal fits into the housing and the USB port. The housing is connected to a print board and the USB port is on the print. The seal must fit very exactly and over this array of possible small failures a exact position is hard to get...
Greatz and thanks
Sent from my GT-I9295 using xda app-developers app

If I can make a suggestion, take it as such for those (of us) that have the GS4A and may or may not be having issues with the microUSB cover/flap/etc:
Personally I can't wait to get my GS4A set up and working with a wireless charger. I'm still on the fence at the moment over which one to get/use but I'll figure it out. But because of the fact that I hate plugging and unplugging the GS4A (or any smartphone) and knowing that each time I do it I'm just creating that much wear and tear on the microUSB port, I purchased the app called Wifi File Transfer Pro a very long time ago and I have never had one single moment to regret the purchase (that means I LOVE IT).
I'm not a shill for it, but honestly, for a buck and change there's no better such app on the Play marketplace that I've been able to track down and I've tried about 30 of them meaning apps that allow you to connect to your device over your Wi-Fi network for file transfers to and from the device, etc.
The only reason I plug my GS4A in is to charge it these days and I'm just getting tired of doing it as frequently as I do because... I currently have a cheap Samsung counterfeit battery - learned the hard way with that one - but I have a real Samsung battery on order, should be here by Friday, purchased with that 50% off code they gave me for registering the GS4A with Samsung a few weeks back.
So in a few days I'll have a wireless charger, a real legit Samsung battery (brand new, even), and I'll use the microUSB port one last time, hopefully to do a proper full charge on that battery (with a 2A charger, even) and then once that's done I'll close that flap with the intention of never opening it again.
But seriously, if you're doing a lot of transfers to and from the phone for whatever reason, look into that app - Wifi File Transfer Pro from smarterDroid - or some other such wireless transfer app depending on your needs and wants (because there are several dozen of them on the Play marketplace and take the wireless route. Yes, using the microUSB is faster overall because it's a hardwired connection but I typically get 6-10MB/s using this app and my 11n network.
Go truly wireless or go home and save that microUSB port just for emergencies...

pink_lady03 said:
Mine broke last night and called samsung the tech guy telling me thats the fist time that the seal port cover broke.and I have to wait 2weeks to get it done.should I go att instead but not sure they will replace this thing...
Click to expand...
Click to collapse
Mine broke off the first week I had it. Horrible design. Terrible application. I kept the plug but since I am constantly plugging in to power up it is more of a hindrance than a feature. Wireless will be an issue unless they will fit inside a protective case. The Active is already too thick to fit in most cases made for the regular S4.

It's the same thickness as the GS4 for the most part, barely a millimeter difference, but the GS4A is a bit longer top to bottom. There are a lot of cases available now for it that accommodate the differences (longer body length, slight expansion at the end rubber caps top and bottom back, etc). Those Diztronic ones are some of the thinnest full body cases I've seen so far but I went the Unicorn Beetle route and have been nothing but happy since I first put it on.
Yes the flap could have been done better I suppose, but I've got a cheap LG prepaid using a similar mechanism with the microUSB port cover and I've plugged unplugged that phone a thousand times over the years, still works fine.
Sometimes I think people should just take better care of their hardware...

A soft case without an opening for the flap would be nice Than it looks better and we can not destruct the flap

Screen replacement after water damage?

So... teardown videos on YouTube fooled me and I thought that this phone is water-resistant. I washed it under tap water (multiple times, actually). After the last time, the screen stopped working, but the phone appears to be OK — even the touch clearly works. I've already disassembled the phone and cleaned the connectors with 95% alcohol, but the screen still doesn't work. Is buying a replacement screen and hoping for a cheap repair the smartest thing to do? After all, the motherboard can also be borked.
EDIT: the screen is completely black

BlueOner said:
So... teardown videos on YouTube fooled me and I thought that this phone is water-resistant. I washed it under tap water (multiple times, actually). After the last time, the screen stopped working, but the phone appears to be OK — even the touch clearly works. I've already disassembled the phone and cleaned the connectors with 95% alcohol, but the screen still doesn't work. Is buying a replacement screen and hoping for a cheap repair the smartest thing to do? After all, the motherboard can also be borked.
EDIT: the screen is completely black
Click to expand...
Click to collapse
I've replaced the screen after dropping the phone. Was only a small chip in the bottom corner, didn't look much at all, but the screen was completely dead. I was in a similar dilemma of wanting to be sure it was only the screen before spending about $100 on a screen. I booted into fastboot, then connected to a PC, then done the fastboot devices command, which returned a valid ID, so I knew the phone wasn't completely dead. Also connecting to the PC and booting the phone, the PC recognised the phone was connected, though without being able to unlock the phone I couldn't check anything else. That was enough for me to go ahead and order the screen. Now everything works fine.

Robbo.5000 said:
I've replaced the screen after dropping the phone. Was only a small chip in the bottom corner, didn't look much at all, but the screen was completely dead. I was in a similar dilemma of wanting to be sure it was only the screen before spending about $100 on a screen. I booted into fastboot, then connected to a PC, then done the fastboot devices command, which returned a valid ID, so I knew the phone wasn't completely dead. Also connecting to the PC and booting the phone, the PC recognised the phone was connected, though without being able to unlock the phone I couldn't check anything else. That was enough for me to go ahead and order the screen. Now everything works fine.
Click to expand...
Click to collapse
Thanks for sharing your experience! In my case, the phone clearly isn't dead, but I wonder whether some circuitry on the motherboard that's responsible for making the display work might be fried. Well... if that's the case, I can always sell the replacement screen after testing, but I'm not sure that someone will buy it for a good price.
Also... where did you get your screen from? On AliExpress, they are as cheap as $50, but most of the cheap ones are clearly some fake crap — TFT/IPS LCD, smaller than the original, fingerprint scanner not working... I guess I need to buy something more expensive. Have you noticed any difference between the original screen and your replacement?

BlueOner said:
Thanks for sharing your experience! In my case, the phone clearly isn't dead, but I wonder whether some circuitry on the motherboard that's responsible for making the display work might be fried. Well... if that's the case, I can always sell the replacement screen after testing, but I'm not sure that someone will buy it for a good price.
Also... where did you get your screen from? On AliExpress, they are as cheap as $50, but most of the cheap ones are clearly some fake crap — TFT/IPS LCD, smaller than the original, fingerprint scanner not working... I guess I need to buy something more expensive. Have you noticed any difference between the original screen and your replacement?
Click to expand...
Click to collapse
It was 4 months ago I got mine from AliExpress, at that time there wasn't any of these cheaper ones for sale. Looking at these cheaper ones they are TFT, though it's not always obvious in the description.
One seller is selling both TFT and OLED and are clearly labelled in the options. So from this assume that all cheaper ones are TFT.
It is a bit of a minefield. I doubt that any of the sellers have the actual original genuine screens. It took me a couple of days to go through all the listings and determine which one would most likely be good quality.
I eventually went for this one, which was slightly more expensive than most. Now though it appears to have gone up about $15 from when I bought it.
https://a.aliexpress.com/_d7OqLlE
At that time it had the best reviews, which appeared genuine. There were others with a higher review count, which appeared to be just as well reviewed, but reading the reviews you realise they are fake. Many reviews, supposedly from the USA, written in very poor pigeon English.
Also saw some stores with high review count, but then realised that most reviews are for completely different products (a common trick by some Ali sellers, completely change an existing listing so a new product looks like it's got high reviews)
The screen is good quality. It took about 3 weeks to arrive, but it was about 2 weeks after I damaged it before I ordered. So it was around 5 weeks after I last used the phone before installing it. After that time it's hard to judge if it is as good as the original. To look at and use the phone you wouldn't think it was a non original replacement, to me it seems to be as good as the original, without doing a side by side comparison. As far as an oleophobic coating, I couldn't say, it's had a screen protector since installing.

BlueOner said:
I washed it under tap water (multiple times, actually)
Click to expand...
Click to collapse
Umm. What? Even with IP rated phones you don't wash it with water. IP rating generally means that its good for accidental drops into water or for use in light rain. Why on earth would you wash it? Yes, I know jerryrig says there's some water ingress protection but it doesn't mean you should wash it with water. It just means you're good for use in light rain at best.

lambstone said:
Umm. What? Even with IP rated phones you don't wash it with water. IP rating generally means that its good for accidental drops into water or for use in light rain. Why on earth would you wash it? Yes, I know jerryrig says there's some water ingress protection but it doesn't mean you should wash it with water. It just means you're good for use in light rain at best.
Click to expand...
Click to collapse
Yes, I know. Very stupid. At least y'all can learn from it and avoid making the same mistake.
Robbo.5000 said:
The screen is good quality.
Click to expand...
Click to collapse
That's reassuring!
Robbo.5000 said:
it's hard to judge if it is as good as the original. To look at and use the phone you wouldn't think it was a non original replacement, to me it seems to be as good as the original, without doing a side by side comparison.
Click to expand...
Click to collapse
Well, I guess that even if it's a bit worse, replacing the screen is better (in my case) than dealing with an older/cheaper phone or throwing a nice sum of money on a phone in similar price range. I will report my experience after replacing the screen, maybe it will help someone. I'm definitely not going to find another guy with 9T (Pro) because of the coronavirus, but comparison with another high-quality AMOLED phone is another way to check the quality.

So... I wanted to order the screen, but when I checked whether the phone still works... it appeared dead. It charges, is visible in USB devices (but no fastboot etc.), the notification LED blinks, but that's all. It worked perfectly some time after the water damage occured, so I guess that the damage progressed. Yes, I didn't clean the phone thoroughly after disassembling it - I thought that the water probably evaporated anyway after using a heat gun, so, as I mentioned earlier, I cleaned only (easily accessible) connectors. Maybe it is something stupid (power button?), but it seems too good to be true. If I don't post another update, just assume that my phone died.

BlueOner said:
So... I wanted to order the screen, but when I checked whether the phone still works... it appeared dead. It charges, is visible in USB devices (but no fastboot etc.), the notification LED blinks, but that's all. It worked perfectly some time after the water damage occured, so I guess that the damage progressed. Yes, I didn't clean the phone thoroughly after disassembling it - I thought that the water probably evaporated anyway after using a heat gun, so, as I mentioned earlier, I cleaned only (easily accessible) connectors. Maybe it is something stupid (power button?), but it seems too good to be true. If I don't post another update, just assume that my phone died.
Click to expand...
Click to collapse
Press F in the comments section guys

My k20 pro Disable screen problem
Hi xda developers
After wetting the phone with a hand sanitizer and using the same wetness of the screen, I played the online game and put it in automatic game mode and rested for a while...
After waking up, I noticed that the phone was turned off, which was turned on by holding down the power button, but the screen is off...
Currently, only vibrators and notification lights work for the phone, and the phone is organized by a computer.
Also, the phone is charged and its sound can be heard while connecting it to the charger, and its sound can be heard in the same way to lock the screen.
Does anyone have an idea?

my phone just take s swim in the river yesterday, now its has no display but still on and even the touchscreen is working (i know is working cuz its register sound when i try to touch it everywhere). it have been dead first but then turn back on with everything work normal. but after about half hour, the screen suddnly dead.
after tear it my self i found where the water coming in, its from the 3.5mm jack. other holes have rubber protection but the jack has nothing. they even put water dammage indicator below the 3.5mm module....
i have try few method like clean the board with isoprofil alcohol but no avail. now im waiting my screeen replacement and will try to fixit my self.

IchsanWin32 said:
my phone just take s swim in the river yesterday, now its has no display but still on and even the touchscreen is working (i know is working cuz its register sound when i try to touch it everywhere). it have been dead first but then turn back on with everything work normal. but after about half hour, the screen suddnly dead.
after tear it my self i found where the water coming in, its from the 3.5mm jack. other holes have rubber protection but the jack has nothing. they even put water dammage indicator below the 3.5mm module....
i have try few method like clean the board with isoprofil alcohol but no avail. now im waiting my screeen replacement and will try to fixit my self.
Click to expand...
Click to collapse
Hello! Had exactly the same issue. Did it work to replace the screen?
My phone got into the sea (well the sea went into it), nothing happened for a while, and then it suddenly went black. Is working (like i can still use it as alarm lol) but the screen is not. Same as BlueOner, i'm afraid is not the screen itself but something in the mother board, so I would love to know if any of you were able to use it after replacing the screen or i will end up with the same issue.
Thanks!

saityro said:
Hello! Had exactly the same issue. Did it work to replace the screen?
My phone got into the sea (well the sea went into it), nothing happened for a while, and then it suddenly went black. Is working (like i can still use it as alarm lol) but the screen is not. Same as BlueOner, i'm afraid is not the screen itself but something in the mother board, so I would love to know if any of you were able to use it after replacing the screen or i will end up with the same issue.
Thanks!
Click to expand...
Click to collapse
It's toast. Don't even bother. The sea salt is hygroscopic, conductive (with moisture), corrosive and -everywhere- now.
It not a question of if it will fail only when.
Tap water is similar but not near as aggressive. The smallest amount of salt (sweat) can change that if it gets inside too. Even so if the device >didn't have it's battery pulled immediately<, then completely turn apart and cleaned with anhydrous isopropyl alcohol it won't fare much better in the long term most likely.
Any water internally can cause massive damage quickly. Or the signs of damage can take months to fully manifest themselves especially if the battery wasn't quickly pulled.
Salt water is fatal because it's residue doesn't easily rinse off as well as what was stated above.
This is why manufacturer warranties refuse to deal with water damage.
It's the gift that keeps giving...
Occasionally you can get lucky if you act fast
My Buds case fell into my coffee cup and immediately crash dived to the bottom like the sub in Das Boot. Cream and sugar too.
I pulled it apart and rinsed it will RO water then with anhydrous isopropyl alcohol in less then 3 minutes. Got as much as the isopropyl out as possible without compressed air and allowed it to dry in a warm sunny spot. Couldn't disconnect the Li battery as it was soldered or spot welded in. After about 2 days of drying it worked and other a year and a half later still is working.
I am still surprised...

Hi. I got water damage. The screen can be turn on but its not responding at all. I can press the power button, the screen lights up, as normal. I just couldn't unlocked it. It wont accept any touch. Also i tried calling from another phone, sound okay, also led notification working.
I havent try the charging port yet.
Anybody have similar experience? Can someone explain my problem? Should i order new screen replacement? Im just afraid its not screen problem.

harithzaim88 said:
Hi. I got water damage. The screen can be turn on but its not responding at all. I can press the power button, the screen lights up, as normal. I just couldn't unlocked it. It wont accept any touch. Also i tried calling from another phone, sound okay, also led notification working.
I havent try the charging port yet.
Anybody have similar experience? Can someone explain my problem? Should i order new screen replacement? Im just afraid its not screen problem.
Click to expand...
Click to collapse
Read my previous post.
You need to dry it out completely.