Related
I know this is a very stupid question but I just want to make sure flashing with CWM is viable.
For the leaked stock ics 4.0 rom I know I should use odin to flash, but how about custom 4.0 rom like Romow? Should I use CWM to flash the zip file?
Thx~
ps: I am currently running rocketrom v19 with CWM
use CWM n flash zip
Sent from my GT-N7000 using xda premium
You should read in the post how must it be done, you should start in annual kernel 3.9 then install chainfire.repack and so on
Sent from my GT-N7000 using xda premium
There are no instructions in romow's thread and that's why i am here to ask for any further instructions. I bet flashing a 4.0custom rom is similar to flashing Gingerbread rom. Am i right?
Also, some ppl claimed that I need to first flash the stock leaked 4.0 rom then have my phone rooted with CWM installed and finally flash custom 4.0 rom with CWM. Is that really necessary?
Sent from my GT-N7000 using XDA App
kelvin fong said:
There are no instructions in romow's thread and that's why i am here to ask for any further instructions. I bet flashing a 4.0custom rom is similar to flashing Gingerbread rom. Am i right?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
There are better roms now than ROMOW's one i think, try flashing Rocket Rom, or the new AOSP
From the instructions given in [02/24/12][Team Rocket ROM][open beta ICS v4.0.3][v1.5][15Tooglebar] daily ROM now! , it seems I really have to flash the leaked ics rom first before installing the rocketrom 4.0.3 rom, is that true? That means I cannot directly install the ics rocketrom from any gingerbread custom rom?
kelvin fong said:
From the instructions given in [02/24/12][Team Rocket ROM][open beta ICS v4.0.3][v1.5][15Tooglebar] daily ROM now! , it seems I really have to flash the leaked ics rom first before installing the rocketrom 4.0.3 rom, is that true? That means I cannot directly install the ics rocketrom from any gingerbread custom rom?
Click to expand...
Click to collapse
Yes youre right, there is a problem with root a cwm in ics, and you need to da that
Follow carefully the instructiones if not you wont hace fullroot
PROBLEMS!
Just have to ask it right here as well...I went to romow yesterday for testing reasons (just flashed the zip in cwm) but I have to go back since there are too many bugs imao atm.
Just tried to go back to my CWM Backup....now I´m stucked at the bootanimation!
Do you guys know what could be the reason here? And what I could do to get my nandroid backup working again?
brooon said:
Just have to ask it right here as well...I went to romow yesterday for testing reasons (just flashed the zip in cwm) but I have to go back since there are too many bugs imao atm.
Just tried to go back to my CWM Backup....now I´m stucked at the bootanimation!
Do you guys know what could be the reason here? And what I could do to get my nandroid backup working again?
Click to expand...
Click to collapse
Did you flash 4.0.3 directly from gingerbread rom? BTW I've heard many people say their phones were stuck in the bootscreen(The samsung N7000 with no boot animation) when they tried to go back from ics to gingerbread. Seems this is a common problem....
kelvin fong said:
Did you flash 4.0.3 directly from gingerbread rom? BTW I've heard many people say their phones were stuck in the bootscreen(The samsung N7000 with no boot animation) when they tried to go back from ics to gingerbread. Seems this is a common problem....
Click to expand...
Click to collapse
Yes, I came directly from GB!
If you can load the boot animation that means ur phone is not bricked. You should try to download a stock gingerbread rom from dr ketan's post and flash it by odin pc.
Sent from my GT-N7000 using XDA App
When going back to GB, i kinda 'restart' the whole process by going back to Stock ROM via Odin, and redo the root and CWM.
Else, there are strange quirky issue ex. CWM just hangs while wiping the phone.
Hey Kelvin Fong & J.wong, thank you guys for your support!
Sorry for noobing around from now on...I´m not exactly the newest guy when it comes to these flash-things, but I have to admit that I´m kind of confused now...
I tried to find dr. ketans thread (this one?) but I´m not getting into his post (sorry for that, as I said: I´m confused!):
dr.ketan said:
Now How I can revert back to Stock ROM/Unroot (In case of replacemet may i need)
If You have Root + CWM - then first find out original stock kernel (zImage file)
Now place this file in zImage folder, n repeat procedure(Initial CFRoot Flasher), which you have done at time of pushing CWM by selecting I am rooted already
Now unroot with above said unrooting tool.
Click to expand...
Click to collapse
The first thing I´ve made evertime in the past was to read the full-noob tutorials...for some reason, I can´t find something like that for the note!
May I kindly ask you if you know a thread were these things (and perhaps the results after going back to stock) are explained from scratch again? Just want to understand what I have to do and how, it´s getting harder to find some information that are not based on years of flash-training
brooon said:
Hey Kelvin Fong & J.wong, thank you guys for your support!
Sorry for noobing around from now on...I´m not exactly the newest guy when it comes to these flash-things, but I have to admit that I´m kind of confused now...
I tried to find dr. ketans thread (this one?) but I´m not getting into his post (sorry for that, as I said: I´m confused!):
The first thing I´ve made evertime in the past was to read the full-noob tutorials...for some reason, I can´t find something like that for the note!
May I kindly ask you if you know a thread were these things (and perhaps the results after going back to stock) are explained from scratch again? Just want to understand what I have to do and how, it´s getting harder to find some information that are not based on years of flash-training
Click to expand...
Click to collapse
Should be this one(http://forum.xda-developers.com/showthread.php?t=1424997).
Firstly, download one of the roms from [Older ROMs (Directly Rootable)].
Secondly, follow the [Installation Guide For Older ROM ], the one using odin pc.
You may see below another flashing method using mobile odin, but that doesn't suit you since that one requires your phone rooted before and will keep your root after flashing. The one with odin pc will wipe out all your data and apps(of course not your SD card) and also unroot your phone. That means your CWM and root will all be gone and you have to follow another post to root it again(now this one:http://forum.xda-developers.com/showthread.php?t=1329360)
this one(http://forum.xda-developers.com/showthread.php?t=1424997)teaches you how to flash a rootable gingerbread rom, but not rooted. This one(http://forum.xda-developers.com/showthread.php?t=1329360)shows you how to root your phone and install CWM. I think these two posts are the best tutorials you are looking for.
I think you should download this >>http://forum.xda-developers.com/attachment.php?attachmentid=907734&d=1329574136
This one is better organized.
Thanks mate! Saved it to my desktop...but finally i was able to manage the problem by simply flashing a *fresh* RocketRom again (?!). I thought it would be worth a try...
Anyway: Thank you very much for your support, it´s good to still meet that friendly kind of people with patience here on the board (it´s getting less these days) hope i´ll be able to return the favor in future
You are welcome! Please note your binary counter may increase if you flash a rooted rom like rocketrom you've mentioned above directly via odin.
kelvin fong said:
You are welcome! Please note your binary counter may increase if you flash a rooted rom like rocketrom you've mentioned above directly via odin.
Click to expand...
Click to collapse
As far as I remember I made my very first steps with odin after I reveived my note (root, cwm)...rocket has been flashed by using cwm. But yes, my binary counter increased definitely...
...I do have a USB Jig, but in some was I am kind of afraid of going trough this! To fumble around in pure darkness...hmmm i don´t know
Have you tried it yourself?
Actually I've got a yellow triangle together with increased binary counter as I followed another tutorial guide(I should follow dr ketan's guide before).
I think removing the counter with a jig is way too dangerous for me so I don't want to risk it. Simply remove the counter only when you really need to bring your phone to samsung because maybe you don't even have to claim the warranty at all.
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
IdleKing said:
Hi Guys!
Well ... sorry if its a stupid question but seems like im new to this.
I rooted my Note using Odin, that worked well. Then i wanted to install LiquidSmooth rom and used mobile odin to flash the zimage that was inside the liquidsmooth rom ... and now the phone doesnt want to boot anymore. Can anyone help?
Click to expand...
Click to collapse
Please read the instructions in his post
You are on 2.3.6
1. Install Mobile Odin
2. Flash REPACK_LP1 CF
3. Let Rom Boot
4. Go to CWM and flash LiquidSmooth
5. Wipe Data, Wipe Dalvik/Cache
NoRmAlY_CrAzY said:
U flashed a leaked ICS kernel on a GB rom?? Is that ur sayin.
Click to expand...
Click to collapse
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
IdleKing said:
Hi! Yes, now that you say it this way thats what i have done. Because in some tut it was said to do it that way, but i guess they were talking about flashing a GB rom/zimage.
Click to expand...
Click to collapse
not really answering the question xD Are you ok GB or ICS right now?
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
IdleKing said:
Zimage came from an ICS Rom but im still running a 2.3.6
Cant i flash the correct one through the download mode?
Click to expand...
Click to collapse
As the install guide says you are meant to flash the repack and then go into recovery and flash the rom. You will likely need to flash a gb kernel via obin and then do as hia install guide says
Sent from my GT-N7000 using xda premium
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
IdleKing said:
Ok, thanks for your help so far.
So you mean the PC version of Odin. In which state will i have to bring my phone in order to do so? Where do i get the GB kernel from?
Would be really cool if you could help me further.
Click to expand...
Click to collapse
Well i am not 100% sure, tbh your safest route would be to re flash a stock gb rom then root it and then try again just to make sure theres no issues, in which case you can download a gb rom from the sticky in the dev section (make sure its a older rootable image!) and flash using odin while your phone is in download mode
please start at http://forum.xda-developers.com/showthread.php?t=1424997 then/or http://forum.xda-developers.com/showthread.php?t=1329360
i am hoping of course, that you can still somehow manage to get into download mode.
I has almost the same issue! I am running speedmod kernel and i want to put back the cf-root 5.3 kernel so I flashed the tar which was included the zimage via mobile oding and after reboot the phone gave me a blank screen and no recovery! only downlaod mmod where I can manage to flash speedmod again via pc odin...
why is that happend?
Come on mate have you even read the opening page for the liquid smoother rom on all opening pages it tells you to the letter how to install and yet you don't follow it and wonder y you have a black screen. Have you installed clock work recovery after rooting your note if not search how to install cwm on you tube cursed4eva is a brilliant guy who spells it all out for you- . Please don't use the fact you a noob as an excuse as I'm probably newer than you but can read and follow instructions to the letter as the developer knows best.
W00t! The phone came back to life! Thanks alot.
Now, what i dont understand is that repack_lp1 thing. I downloaded I9220LP1-N7000-ICS-REPACK.tar ... now do i flash this one using mobile odin? Will this install the CFM?
Look for cursed4eva on YouTube watch the video were he shows you how to install clockwork then read the op of liquid smooth rom simple !
Please do some more research before randomly flashing files without having any knowledge as to what they do.
Before you start fiddling with repacks and leaked ICS based roms, read this: http://forum.xda-developers.com/showthread.php?t=1633938
If you still think it's a good idea to flash anything based on the leaked ICS builds, go to the thread of the rom you want to flash and read the instructions. Again, read the instructions and then to be sure read the instructions once more.
Then follow the instructions step by step and you're good to go.
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem. However you should follow the instruction from their website.
tknguyencsu said:
From my rooted GB Chrack's rom I just used PC odin to flash AbyssNotekernel42CWTouchOriginalLogo.tar then I flashed Liquid Smooth rom without problem.
Click to expand...
Click to collapse
This snippet of information can only further confuse a man who's mustering the courage to step into the unknown. Don't post stuff like that in threads like this. You can tell that to me or any other vet, and we'll know what you're talking about. OP won't.
tknguyencsu said:
However you should follow the instruction from their website.
Click to expand...
Click to collapse
Now THIS is what he needs to hear.
So yeah, I'm a noob and hate myself and want to get that out of the way. I have an AT&T (but I'm with Consumer Cellular) i897 on 2.2 that I rooted and unlocked over a year ago with super one click and that's the extent of my experience other than an iphone jailbreak. I have searched so many places that I now have a migraine and would like to just get a short easy answer. There are so many different variables for updating and rooting that I can't find an answer to MY specific situation.
I'd like to update to new software but I don't know which version works best with my older captivate and then find the right tool to root. I don't do alot of tweaking, I just like removing all the AT&T bloatware and would like to see some functioning improvement. It tends to freeze on occasion, can lag a bit and not always cooperative.
I may be asking too much but could one of you intelligent developer type guys just tell me what to update, flash, replace, with what and then the tool to root, I would be ever so grateful.
edit: I just realized that I won't need to root again if I'm not doing an officiate update, correct?
Update to Android 2.3.5 Gingerbread here...Stock GB i897ucKK4
Get Root and/or KK4 Corn Kernel that has CWM Recovery included so that u can move on to flashing Dev Roms here...[Utility] KK4 Easy Root.
Read carefully. Read some more. Understand what ur doing and the risks involved. Proceed. Enjoy. Be sure to at least hit the Dev's thanks buttons because they have worked hard and spent a lot of time doing what they do.
4-2ndtwin said:
Update to Android 2.3.5 Gingerbread here...Stock GB i897ucKK4
Get Root and/or KK4 Corn Kernel that has CWM Recovery included so that u can move on to flashing Dev Roms here...[Utility] KK4 Easy Root.
Read carefully. Read some more. Understand what ur doing and the risks involved. Proceed. Enjoy. Be sure to at least hit the Dev's thanks buttons because they have worked hard and spent a lot of time doing what they do.
Click to expand...
Click to collapse
So then, do I need to root again with KK4? And what do you mean by move on to flashing Dev Roms? As in a 2 step process for updating to 2.3.5 or that I might want to experiment with more advanced firmware?
Thanks for the help and yes I will certainly read everything over and over until I'm sure I understand it before I proceed. Thanks and donation too.
Android 2.3.5 GB i897ucKK4 is the latest official Stock firmware release for the Captivate. And the last official.
The Utility KK4 Easy Root will get u Root. And if that is where u want to stop, then that is fine. But if u want to go on from there into flashing some Developer's Roms in the Dev forum then u can choose to keep the Corn Kernel, that has CWM Recovery included, and use that to flash a Rom of ur choice.
And thanks for the donation. Appreciate that !!
4-2ndtwin said:
Android 2.3.5 GB i897ucKK4 is the latest official Stock firmware release for the Captivate. And the last official.
The Utility KK4 Easy Root will get u Root. And if that is where u want to stop, then that is fine. But if u want to go on from there into flashing some Developer's Roms in the Dev forum then u can choose to keep the Corn Kernel, that has CWM Recovery included, and use that to flash a Rom of ur choice.
And thanks for the donation. Appreciate that !!
Click to expand...
Click to collapse
Just to be sure I understand then, I WILL lose root when I update to 2.3.5 even though it's not an OTA or by going through kies, correct?
I feel as if you understood and addressed my needs perfectly and I really appreciate your help.
Yep. U will loose Root. That Stock install will do a full wipe. So back up ur contacts, apps, messages, etc. whatever u want to save. Then flash the KK4. After that u can use the Utility to get Root.
U could also, if u prefer, install the i897ucKK4 through the Software update in the Settings of the phone. Then after the update, use the Utility.
4-2ndtwin said:
Yep. U will loose Root. That Stock install will do a full wipe. So back up ur contacts, apps, messages, etc. whatever u want to save. Then flash the KK4. After that u can use the Utility to get Root.
U could also, if u prefer, install the i897ucKK4 through the Software update in the Settings of the phone. Then after the update, use the Utility.
Click to expand...
Click to collapse
I actually tried that (and I don't remember the message) but it wouldn't update so I assumed it was because I'm either not with AT&T or it was rooted. I will do it your way after I read through all the instructions. I have Titanium Backup so I'm good. Thanks again!
Gotcha.
And if u have any pc connection issues, download mode issues, etc. see this thread... http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1
Btw, u r very gracious on ur donation !! Thank u !
4-2ndtwin said:
Gotcha.
And if u have any pc connection issues, download mode issues, etc. see this thread... http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1
Btw, u r very gracious on ur donation !! Thank u !
Click to expand...
Click to collapse
Perfect. And you're welcome. Sometimes us newbies are presented with so many overwhelming options it's almost impossible to make an informed decision. Removing the frustration was worth it. Wish I could have given more.
Glad to help. And glad u got it going! :thumbup:
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
Update to Android 2.3.5 Gingerbread here...Stock GB i897ucKK4
Get Root and/or KK4 Corn Kernel that has CWM Recovery included so that u can move on to flashing Dev Roms here...[Utility] KK4 Easy Root.
Read carefully. Read some more. Understand what ur doing and the risks involved. Proceed. Enjoy. Be sure to at least hit the Dev's thanks buttons because they have worked hard and spent a lot of time doing what they do.
Click to expand...
Click to collapse
I can get to the KK4 Easy Root page and even access the screenshots but the link below takes me to an empty dropbox page. Do you have an alternate?
http://db.tt/Dz4fPI7N V1.1
Ok, here is a Dropbox download link... http://dl.dropbox.com/u/39937043/KK4_Root_v1_1.zip
4-2ndtwin said:
Ok, here is a Dropbox download link... http://dl.dropbox.com/u/39937043/KK4_Root_v1_1.zip
Click to expand...
Click to collapse
That worked great, thanks. Also, Norton says the KK4 update was a possible malware/phishing file. A false positive I presume? Just want to make sure it wasn't from an older site that hadn't been looked at in awhile especially since I procrastinated so long updating my Captivate.
girbabe said:
That worked great, thanks. Also, Norton says the KK4 update was a possible malware/phishing file. A false positive I presume? Just want to make sure it wasn't from an older site that hadn't been looked at in awhile especially since I procrastinated so long updating my Captivate.
Click to expand...
Click to collapse
Yes, false alarm for kk4. It will update your bootloaders to Gingerbread.
I recommend that you silence, uninstall or disable any AV while flashing, especially when flashing bootloaders, cause you really, really don't want anything interfering with a successful, complete bootloader flash. If you have bad bootloaders, you are bricked.
laughingT said:
Yes, false alarm for kk4. It will update your bootloaders to Gingerbread.
I recommend that you silence, uninstall or disable any AV while flashing, especially when flashing bootloaders, cause you really, really don't want anything interfering with a successful, complete bootloader flash. If you have bad bootloaders, you are bricked.
Click to expand...
Click to collapse
Will do. But what happens if the phone rings? Safe to just ignore it?
girbabe said:
Will do. But what happens if the phone rings? Safe to just ignore it?
Click to expand...
Click to collapse
Don't worry about that, the phone won't ring while in download mode
Just make sure nothing interrupts the flash (unplugged cable, program closes, drop phone.. etc) as it will most likely brick it.
BWolf56 said:
Don't worry about that, the phone won't ring while in download mode
Just make sure nothing interrupts the flash (unplugged cable, program closes, drop phone.. etc) as it will most likely brick it.
Click to expand...
Click to collapse
I guess it shows how long it's been since I've done this. So many things have changed since then, as has my aging memory.
I will make sure everything is safe and secure begin I start. Thanks again for all your help. If I had known how friendly and responsive this forum was, I would have asked for help a long time ago.
I was getting ready to update/root today and I'm not sure what to use for download mode. I have superoneclick with ADB from back in 2011 installed when I first rooted along with kies and all the drivers and I don't know whether to use it or start over or even wipe some it off my PC to avoid conflict. It seems to be the only - or at least the easiest way to get my captivate into download mode but people are reporting issues. I really really don't want to go through the SDK with JRE install process since just reading it gives me a headache. Can you please advise?
I used Odin, not the one click variety, but the basic one. I followed this guide at android forums, which has been pointed to in many xda threads:
http://androidforums.com/captivate-...ng-adding-cwm-recovery-2-3-5-corn-kernel.html
It worked for me, in no small part because I printed out that web page and had the hardcopy in front of me as I completed the steps.
girbabe said:
I was getting ready to update/root today and I'm not sure what to use for download mode...... Can you please advise?
Click to expand...
Click to collapse
See this Stickied Thread in the General Forum. The OP has a lot of helpful info on getting into Download mode and etc.
http://forum.xda-developers.com/showthread.php?p=33227541
Also, as I posted before, u can get Root and/or KK4 Corn Kernel that has CWM Recovery included so that u can move on to flashing Dev Roms here...[Utility] KK4 Easy Root. As a bonus this utility can get u into download and/or recovery mode. Instructions are included. :thumbup: Be sure to hit Red_81's Thx button. Also see his other Utility that he put together...ADB Portable, Captivate version.
Sent from my SAMSUNG-SGH-I747 using xda premium
hey guys just grabbed this samsung galaxy s captivate from a friend whos dad found in las vegas sooo i guess its mine now, i have no plan on using it as my phone just for developement but i see that this is the rogers version (i896 while the at&t is the i897) and the forum only has it for the at&t version so im guessing they can use same root methods and use same roms correct? i see that a 2.3 update rolled out for it via kies but this one is still on 2.1 and i saw you can only root it on 2.1 and 2.2 so im staying here for now, i was guessing that superoneclick or gingerbreak could root this phone so ill try them both. one last question is there a better version of touchwiz ported to it? like galaxy s2-s3 look and feel? if now i was hopeing to get CM 10.1 on it, ccan somone point me in the right direction please?
Edit: i rooted it with z4root and was successful, i tried to get CWM on it but it seems that Rom manager dosent support andrid 2.1, and if i do get rom manager on here is there one for my i896? or do i just use the at&t cwm?
Trozzul said:
hey guys just grabbed this samsung galaxy s captivate from a friend whos dad found in las vegas sooo i guess its mine now, i have no plan on using it as my phone just for developement but i see that this is the rogers version (i896 while the at&t is the i897) and the forum only has it for the at&t version so im guessing they can use same root methods and use same roms correct? i see that a 2.3 update rolled out for it via kies but this one is still on 2.1 and i saw you can only root it on 2.1 and 2.2 so im staying here for now, i was guessing that superoneclick or gingerbreak could root this phone so ill try them both. one last question is there a better version of touchwiz ported to it? like galaxy s2-s3 look and feel? if now i was hopeing to get CM 10.1 on it, ccan somone point me in the right direction please?
Edit: i rooted it with z4root and was successful, i tried to get CWM on it but it seems that Rom manager dosent support andrid 2.1, and if i do get rom manager on here is there one for my i896? or do i just use the at&t cwm?
Click to expand...
Click to collapse
Yes, same device, different branding, better modem/radio. You can flash anything found here, and some from the Galaxy S i9000 section. As for rooting:
1. Grab a kernel for your current ROM version. I think the latest Rogers ROM is KH2, but you'll have to check on that. If you're not on it yet, grab this http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html (pass:sampro.pl), and flash it through Odin(I'm not sure if its included. If its not, google for it. Odin 1.83 or 1.85)
2. Flash it through Odin
3. Reboot into recovery, flash http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
4. You now have root. Mod all you want, and proceed to flash yourself to JB 4.3, or any other version you want
thebulletfromhell said:
Yes, same device, different branding, better modem/radio. You can flash anything found here, and some from the Galaxy S i9000 section. As for rooting:
1. Grab a kernel for your current ROM version. I think the latest Rogers ROM is KH2, but you'll have to check on that. If you're not on it yet, grab this http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html (pass:sampro.pl), and flash it through Odin(I'm not sure if its included. If its not, google for it. Odin 1.83 or 1.85)
2. Flash it through Odin
3. Reboot into recovery, flash http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
4. You now have root. Mod all you want, and proceed to flash yourself to JB 4.3, or any other version you want
Click to expand...
Click to collapse
as we are speaking i am udating it with kies to the 2.3.3, do i still use this method? (i unrooted just in case)
thebulletfromhell said:
Yes, same device, different branding, better modem/radio. You can flash anything found here, and some from the Galaxy S i9000 section. As for rooting:
1. Grab a kernel for your current ROM version. I think the latest Rogers ROM is KH2, but you'll have to check on that. If you're not on it yet, grab this http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html (pass:sampro.pl), and flash it through Odin(I'm not sure if its included. If its not, google for it. Odin 1.83 or 1.85)
2. Flash it through Odin
3. Reboot into recovery, flash http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
4. You now have root. Mod all you want, and proceed to flash yourself to JB 4.3, or any other version you want
Click to expand...
Click to collapse
i lied sorry it says its 2.2 update, i thought i saw it was a 2.3 update.
Trozzul said:
i lied sorry it says its 2.2 update, i thought i saw it was a 2.3 update.
Click to expand...
Click to collapse
This method works for any and everything. Once you installed it, you can downgrade to Bootloader-less Froyo and Eclair ROM with no issue
thebulletfromhell said:
This method works for any and everything. Once you installed it, you can downgrade to Bootloader-less Froyo and Eclair ROM with no issue
Click to expand...
Click to collapse
I'll do this after school, and so I don't understand this fryo and eclair boot loader thing. Also can you show me the stable cm10.1/10.2 ROM please? I looked on cm and it was messed up for some reason
Careful with flashing ROMs with bootloaders!
Bad flash may brick your phone with no DIY solution.
- Update to 2.3.3 via Kies (install correct Samsung drivers first, follow the instructions)
- Reboot to make sure all is OK
- Go to Download mode, Flash Corn kernel to get CWM (find it in attached guide, read carefully and install correct drivers)
- Reboot to make sure all is OK
- Download CM10.1.2 Stable + Gapps, copy to your Internal storage (not SD card)
- In Recovery, do Factory Reset, Clear cache, Clear Dalvik
- Flash CM10.1.2. stable + Gapps (follow the instructions in the guide, no root needed to flash custom ROM)
- Enjoy rooted Android 4.2.2
https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1
Best use Windows 7 computer, Apple users report issues.
Val D. said:
Careful with flashing ROMs with bootloaders!
Bad flash may brick your phone with no DIY solution.
- Update to 2.3.3 via Kies (install correct Samsung drivers first, follow the instructions)
- Reboot to make sure all is OK
- Go to Download mode, Flash Corn kernel to get CWM (find it in attached guide, read carefully and install correct drivers)
- Reboot to make sure all is OK
- Download CM10.1.2 Stable + Gapps, copy to your Internal storage (not SD card)
- In Recovery, do Factory Reset, Clear cache, Clear Dalvik
- Flash CM10.1.2. stable + Gapps (follow the instructions in the guide, no root needed to flash custom ROM)
- Enjoy rooted Android 4.2.2
https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1
Best use Windows 7 computer, Apple users report issues.
Click to expand...
Click to collapse
thanks for this! going to update it to gingerbread when I get home, I see that I have to flash a kernel in order to get root and CWM, this would have to be my first time so I hope I don't screw up xD I still don't quite know what kernels are even though I have been rooting/flashing for a long time. I have Hard bricked soooo many of my Samsung devices, like 2 or 3 and I wanted to cry when I bought my GS2 xD.
The good news is that Captivate is hard to brick. The only critical part is bootloaders update. Leave this task to Kies, millions of phones got updated this way (including mine). Yes, there are reports for bricked Captivate after Kies, but hope everything will go smoothly. Just follow Samsung's update instructions. Google what Kies version is recommended for Captivate update (i don't remember, sorry). To update to latest stable CyanogenMod read the guide and follow the instructions closely. You'll find inside the links to one-click Corn kernel update. Careful with Heimdall drivers, they are for a specific USB port (it is explained in the guide). Again, no root is needed for upgrade process, only CWM. CyanogenMod comes rooted. Good luck!
Val D. said:
The good news is that Captivate is hard to brick. The only critical part is bootloaders update. Leave this task to Kies, millions of phones got updated this way (including mine). Yes, there are reports for bricked Captivate after Kies, but hope everything will go smoothly. Just follow Samsung's update instructions. Google what Kies version is recommended for Captivate update (i don't remember, sorry). To update to latest stable CyanogenMod read the guide and follow the instructions closely. You'll find inside the links to one-click Corn kernel update. Careful with Heimdall drivers, they are for a specific USB port (it is explained in the guide). Again, no root is needed for upgrade process, only CWM. CyanogenMod comes rooted. Good luck!
Click to expand...
Click to collapse
alright thanks! hoping nothing goes wrong!, i also saw that it was hard to brick the cappy and theres a mod thought makes it unbrickable or something? would you recommend to use that?
Trozzul said:
...theres a mod thought makes it unbrickable or something? would you recommend to use that?
Click to expand...
Click to collapse
It's a hardware modification. No use to do it now on a 3y old phone. Just update your phone to a stable Android 4.2.2 build and go light on apps and data. Don't expect much from a single core CPU and limited RAM phone. Nobody ever expected that Captivate Android development will go so far. Use what you got and upgrade the phone when you need more muscle.
Val D. said:
It's a hardware modification. No use to do it now on a 3y old phone. Just update your phone to a stable Android 4.2.2 build and go light on apps and data. Don't expect much from a single core CPU and limited RAM phone. Nobody ever expected that Captivate Android development will go so far. Use what you got and upgrade the phone when you need more muscle.
Click to expand...
Click to collapse
i know its 3 years old but i think the cpu is better than my 1 year old lg venice, on minecraft it lags and is like 10fps i get amazing fps on my cappy!
Val D. said:
It's a hardware modification. No use to do it now on a 3y old phone. Just update your phone to a stable Android 4.2.2 build and go light on apps and data. Don't expect much from a single core CPU and limited RAM phone. Nobody ever expected that Captivate Android development will go so far. Use what you got and upgrade the phone when you need more muscle.
Click to expand...
Click to collapse
is this the correct stable CM10.2 rom? http://download.cyanogenmod.org/?type=stable&device=captivatemtd
Trozzul said:
is this the correct stable CM10.2 rom? http://download.cyanogenmod.org/?type=stable&device=captivatemtd
Click to expand...
Click to collapse
CM10.1.2 Android 4.2.2. is the latest Stable release. Don't get confused with CM10.2 Android 4.3 Beta.
Val D. said:
CM10.1.2 Android 4.2.2. is the latest Stable release. Don't get confused with CM10.2 Android 4.3 Beta.
Click to expand...
Click to collapse
Yay it worked thank you so much I'm enjoying every bit of it, one last question though xD I noticed this even without it being rooted and its doing it now, the WiFi signal on the status bar is always on the bottom two signals, this doesn't happen with my tablets, I don't see it taking a bit for stuff to load.
Trozzul said:
the WiFi signal on the status bar is always on the bottom two signals
Click to expand...
Click to collapse
Different levels for each indication bar, probably. Is the WIFI working correctly? If yes, then nothing to fix here.
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app