I have bought a SGT and i need to know...
first, i have to get root, right ?
then the recovery then the kernel ?
cant figure out how to get de recovery working without flashing a new kernel, cause the recovery its on the new kernel.
The kernel that i have downloaded its a .tar file
The only thing that i dont know its how to flash a kernel.
Cause my old phone Xperia X10 mini has a locked Bootloader.... the rest it's easy...but i dont know how to flash the kernel, please somebody teach me how... can't find the answer u.u
Sent for my GT-P1000L using my girlfriend's PC :3
You dont HAVE to get root? But if you want mods ir get functionality from some apps then you need to root.
What kernel did you download? Most kernels come with a guide for instance CF kernel has unstructions in the thread. But Generally kernels are flashed via ODIN through the PDA section. Make sure reparrtition is UNCHECKED. DO NOT TOUCH ANYTHING ELSE before you flash.
Wow, that was quick !
I'm trying to flash this: http://forum.xda-developers.com/showthread.php?t=974408
And... first i need to flash the kernel.
I have a stock ROM. I plug my tab to usb (tab on), open ODIN and flash the kernel ?
WTH is download mode ?!
when i'm able to flash the kernel, i kown how to flash the rest... but til the moment, im not able to flash the kernel xd
Thanks for your quick reply
Download mode is a maintenance mode that allow you to flash kernels rom radios etc via odin or otherwise. If you are on stock ROM you can go to download mode by switching your tab off and then hold down the volume down rocker with power button. If successful a yellow android robot holding a shovel will appear with warning do not switch off target.
Before flashing or connecting to ODIN. Make sure tab is identified in computer by ODIN. You get a yellow box with COM#
To flash a kernel. Put your tab into download mode. Connect your tab to pc (make sure drivers are installed before this step). Fire up ODIN and flash by selecting tar file in PDA section. Make sure Repartition is UNCHECKED AND DO NOT TOUCH ANYTHING ELSE.
Here is a link with detailed instructions. Its for another kernel but the guidelines are the same and should work for your kernel: http://forum.xda-developers.com/showthread.php?t=885734
Wow
I get DM, but...
The first attemp failed... it says Write operaton failed :c
And my second attemp its stuck on "Setup Cpnection"
i'm hopeless right now .____.
Anyhow, thanks for your very clever answer.
Thanks a lot !
Reinstall samsung drivers, make sure you run ODIN as adminstrator or use another computer (dont ask it worked for many users encountering this error.
I suggest you hold off flashing anything. Read around till you have enough knowledge and confidence to do so. Thats what I did. Good Luck!
Disconected, reboot, and now gets this: http://forum.xda-developers.com/showthread.php?t=1088164
Damn u.u
Thats an alternative download mode. Flash the stock rom via odin (the device should still be detectable).
In fact, it is detectable
But i cant find a stock rom that works on my P1000L T-T
Contact the dev of your kernel. Search around this forum and you will find what you are looking for.
Gotcha !
Downloading (...)
Then flash it with re-partition too ?
THANKS !
OK... my nightmare its finished.
But, already cant install the custom kernel haha, it fails in the end of the process.
Anyhow, thanks a lot for your wisdom, my friend
I just want to add to all noobs (myself included) who are thinking about installing custom ROM's/kernel's for the first time, that they look/read closely at the overcome custom ROM -thread.
There is a extremely detailed guide to installing the custom ROM (thanks to pittbull). No need to understand what you are doing :-D , you just have to follow the instructions given. That's how I did it.
Its not only for noobs. I had to consult it to fix a few issues myself. Really great guide.
How about using CWM?
Do I put the update.zip in my sd card, use CWM and reboot into recovery and proceed?
Can i tell you the truth ?
When i noticed that overcome was only for p1000 -reading the guide- just stop the reading...
Enviado desde mi GT-P1000L usando XDA Premium App
And you are right. Overcome is for p1000 gsm tabs. I was replying to previous poster about importance of reading the guide.
I
learning_to said:
Can i tell you the truth ?
When i noticed that overcome was only for p1000 -reading the guide- just stop the reading...
Enviado desde mi GT-P1000L usando XDA Premium App
Click to expand...
Click to collapse
Oops, sorry. You are right. Didn't notice that one.
But AFAIK the process would be the same, you just gonna have to use different files(ROM) accordingly, for your device. Please, someone correct me if I'm wrong...
Related
Well I've found bits on how to use it but no complete guide and I'm having issues. I need to figure out how to use this I'm dying to flash cm7 but not untilled I know what I'm doing at this step. Thank you for all of ur support this site is a life saver
What do you know
Sent from my Captivate using XDA Premium App
Not a whole lot I've done all of my flashing through clockwork, one click Odin and one click root. I saw a video using .tar with PDA but It failed when I tried to flash a kernel as a test. giving me "phone..!..computer" got that figured out but I'm scared to do anything else without some help.
For the purposes of cm7 it is real easy. You open odin. Make sure repartition and autoboot are NOT checked. This is important. Not checked, no repartition no autoboot. You save the kernel tar to your desktop, our wherever you want. Click pda, select kernel. Enter download mode click start. Since auto boot is not checked phone will stay in dl mode. Give out a minute to be safe. Then while in dl mode three button combo to recovery.
If you are on a custom rom already do not flash stock prior to starting. Custom roms have kernels with clockwork so you can skip first step.
That is the jist of it, but please do not attempt flash if you are unsure. The steps are easy but your phone is expensive
Sent from my Captivate using XDA Premium App
well first you need to download the correct ODIN... Here it is:
http://forum.xda-developers.com/showthread.php?t=818439
This Odin will give you the option to input new PDA, PHONE, and others that I believe is necessary to flash CM7.
mcord11758 had good instructions from what I have read on the CM7 thread.
There is a video tutorial on the OP of the CM7... I have not watched it but I'm guessing it is pretty good if they put it in there. Here that is:
http://forum.xda-developers.com/showthread.php?t=978150
Hope that helped...
Hm seems to be what I did I'm going to hold off on trying again for a little while til its a little more stableanyway thanks.
G'evening guys,
got a little bit of a problem here. My (european) Samsung Galaxy S is screwed. As soon as I boot it up, it loads a custom flashed TWLauncher which immediatly crashes. I can click the message away, but then after a few vibrations it will crash again. I can put it in Kies Mode, but I can't get Kies on Win to start some kind of recovery.
If I try to get into the bootloader, I'm only gonna see the default Samsung bootloader. I tried to push an update.zip on the phone, but it would not install due to some kind of signature errors.
Story first:
1. Rooted it with Superoneclick v1.4
2. Installed Recovery Manager. Not sure if some kind of recovery has been installed, at least none permanent.
3. Updated TWLauncher with SGS Tools in Flash
4. Did a factory wipe
I already tried loading a custom firmware via Update.zip and searched for an official update.zip, but didn't found one.
Also tried to push an older TWLauncher via adb, but this failed as I couldn't use su.
So, does anybody have a clue on how to solve this? Or will the only way to fix it be a send-in to Samsung?
LOL!!!
bricked just because of TWLauncher......
I think that is not brick.....
Flash stock rom via Odin.
Sent from Miui powered SGS
or custom ROM more better and satisfying
azzledazzle said:
Flash stock rom via Odin.
Sent from Miui powered SGS
Click to expand...
Click to collapse
sry for my english
thx for your answer i have tried a few times to flash my sgs with odin but it didnt work . i have started my sgs into the downloding mode and then i start odin to flash and then it does nothing
did you use a guide for flashing through odin? is your phone drivers installed on your computer? what kind of error?
Alright buddy, I agree sounds like you need to reflash a new rom.
Check out this link. By no means am I ordering you to flash darky's rom (even though it is bloody brilliant) It's a good guide for using odin.
If you follow it down to part 2 of the guide then you will have a basically stock Gingerbread with a few tweaks to make it a better experience.
Be sure to read it carefully as some of it isn't necessarily for you.
http://www.darkyrom.com/community/i...g-rc6-need-to-flash-dark_core_2-2-first.2382/
All credits go to darky, ficeto and ceriko obviously for the rom & guide.
Good luck
It's only a BRICK if the device is completely unrecoverable. This isn't even a soft-brick... the launcher just crashed.
Flash a new rom with ODIN;
or Flash a Kernel with CWM recovery via ODIN, and then boot into recovery.
Odin will work; just make sure you've got the drivers installed.
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Thanks for your help my sgs is working again the thread can be closed
You made it sound as if your phone was bricked! lol
I'd recommend you to install the Darky ROM 9.5.
I myself am a totally new Android and Galaxy S user. The first thing I did after unboxing my phone was to flash Darky's 9.5 on it. Its brilliant.
Here's the guide.
EDIT: Turns out I'm not allowed to post links. Well use google!
bigred85 said:
@kilokilo1066
thx this was a good idea but now i have the problem that odin is standing on set Partition and that over one hour what should i do ?? cancel odin and tried again ?
Click to expand...
Click to collapse
Glad your sgs is back up and running buddy
Like what everyone els is saying, a reflash is the way to go. Id recomend flashing with EZbase. they offer the best stocklike roms.
bigred85 said:
Thanks for your help my sgs is working again the thread can be closed
Click to expand...
Click to collapse
Read the god damn thread people. Problem solved. Let this thread die.
So I tried updating this device to GB - model is P1000N (too bad I only realized this on my edit of this post, I I always thought what I have is without the N), I followed this YT guide http://www.youtube.com/watch?v=RtWdNqwAETs, all went well until when I tried to reboot my device.
Procedure (ODIN !):
- Press the thanks button and/or donate - DONE
- Download and extract the firmware zip - DONE
- Download and extract the attached gt-p1000_mr_PIT.zip - DONE
- Download and extract the attached dbdata.zip - DONE
- Flash the firmware tar as PDA, repartition enabled, use the attached PIT - DONE
- After flash immediately boot into download mode again - STUCK HERE, DEVICE BOOT W/ SOUND, LIGHTS ON, BLANK SCREEN
- Flash dbdata.tar as PDA (NO repartition)
- After flash immediately boot into recovery mode
- Wipe cache
- Wipe data / factory reset
Click to expand...
Click to collapse
What do I do?
Use overcome method instead
Go to overcome site
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
Problem is Vol Down + Power won't respond, and so is Vol Up + Power. :/
Sent from my HTC Desire S
make sure it is fully charged.
Power down.
Launch Odin.
Cable connected.
Vol-down + power.
If odin suddenly see your device, flash away.
Hope it will. Search here but seems almost all threads got no fix. :/
Damn why didn't I see that method above before.
Sent from my HTC Desire S
Overcome method is quoted hundreds of time in this forum. Most reliable method to "restock" and install CWM recovery for P1000 device
I'm downloading the GB-Stock-Safe-v5.zip now. It sucks to have slow internet.
By the way, do I have to flash that Modem file too? I can see that it's a zip file but on the screenshot the only thing he flash is the "modem.bin", extracting the modem zip has some META-INF and updates folder.
Lastly, regarding "gt-p1000_mr.pit" - is this common file? I have downloaded this already earlier in the separate tutorial.
Okay, so I downloaded the zip file.. followed the instruction here http://dl.dropbox.com/u/34690776/The Installation Guide The Overcome Experience.png and it's a success based on my attached screenshot but after completing step 5 I am stuck to here coz step 6 says that tab should reboot by itself but mine doesn't. It looks like it reboot but blank screen and the lights are on. It stays that way. No reboot. No image like that on step 6. :/
Even after disconnecting the device and turning it on it stays on blank screen w/ the lights on.
Someone can help me, please?
No idea who no reboot.
But try again the same thing.
Power down.
Vol down + power
flash again.
I'm no expert but does tabs also involve bootloader stuff? Like in HTC devices we have to unlock bootloader before we can root and change rom and stuff?
Sent from my HTC Desire S
it does, the Overcome guide mention that too.
Can you find an official froyo for your device?
priyana said:
it does, the Overcome guide mention that too.
Can you find an official froyo for your device?
Click to expand...
Click to collapse
No, I did not check my device info before flashing, I thought it will go smooth. :/
Is official FROYO rom's available here? Would it help if I flash it?
Thanks.
In sammobile firmware.
The locked boot loader should allow you to flash back the same firmware, I assume.
Sent from my GT-P1000 using XDA
Okay I will check it out.
By the way, would it be possible that the cause of this is because I did not root first?
EDIT :
Sucks most of the files : This file does not exist, the access to the following file is limited or it has been removed due to infringement of copyright.
:/
No. When you flash with Odin, root is not required.
Sent from my GT-P1000 using xda app-developers app
From the 1st post I never see you mention which gtab P1 variant you have, you only give the link from youtube that show how to upgrade gtab p1000 7 to gb.
so, can you specify which gtab p1 variant do you have?? so we can help you to unbrick your tab in the right path.
P1000? P1000L? P1000N? or???
It's P1000N (sh%#%#%t!!! I only know this now! I always thought I have the other model...) This is so careless of me.
I am downloading the Firmware www.sammobile.com/firmware/?page=8&view=2712 now, should I still use the same PIT mentioned here http://forum.xda-developers.com/showpost.php?p=13682956&postcount=1 when flashing?
qm4n76 said:
From the 1st post I never see you mention which gtab P1 variant you have, you only give the link from youtube that show how to upgrade gtab p1000 7 to gb.
so, can you specify which gtab p1 variant do you have?? so we can help you to unbrick your tab in the right path.
P1000? P1000L? P1000N? or???
Click to expand...
Click to collapse
SORRY FOR THIS DOUBLE POST (AND CAPS LOCK. lol)
I am just so happy, device booted successfully.
Just for the curious, this is the firmware I flashed : http://www.sammobile.com/firmware/?page=8&view=2712
Thank You Very Much for helping me/replying here : priyana and qm4n76.
Phew. Lucky you.
So not a symptom of locked bootloader.
Sent from my GT-P1000 using xda app-developers app
Yeah, flashed an incorrect firmware.
Sent from my GT-P1000N
my father has a stock samsung galaxy tab (p1) running the horrible android 2.2 with touchwiz all over it
he asked me to update the device so it can run ICS
i've done that with my SGS1 which was easy, but now i have a problem.
when reading the guide for installing cm9, its says "This guide applies to a Samsung Galaxy Tab (GSM) on the stock 2.3 release"
my sgs1 was already running 2.3.4, so i just followed the instruction and that was that, but my fathers tab is stuck on 2.2 and has never been rooted or anything
my question is can i simply just apply the steps or do i have to update the device to 2.3 and then follow the instruction
i cant afford to brick the device or i'll never hear the end of it, he love his tab as if it was his child or something
PS. I've learnt how to root the device using (superoneclick) and i've also found how to flash CWM on it, can i do that and then flash the CM9 Rom to it.
im sorry if missed a similar post somewhere but im still a noob at this and i really wanna do it (froyo + touchWiz is a recipe for a crappy device :silly: )
Use overcome method.
I am sure you have seen so many posts here with the same instruction
(many of them by me too)
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread
But since you want ICS, continue reading the guide.
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
priyana said:
Use overcome method.
I am sure you have seen so many posts here with the same instruction
(many of them by me too)
http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
or
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
missing files at
http://tabfirmware.com/2012/01/romk...e-7-series-v4-1-0-♫-overcome-kernel-v4-0-0-♫/
and missing kernel here
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread
But since you want ICS, continue reading the guide.
- download ICS (CM9 or AOKP) and gapps-ics and put in external sd card.
- boot to download mode
- you need to use Odin to flash Overcome kerner tar
- once flashed the tab reboots.
- ignore the robotic voice, just force the tab to off
- boot to CWM recover (press vol-up and power )
- flash ICS (CM9 or AOKP)
- after flashing the system will convert your tab to MTD partition, but it will probably bring you to recovery or stuck at boot.
- force reboot to recovery again
- flash ICS again
- immediate after complete, flash gapps
- reboot
Click to expand...
Click to collapse
thanks a bunch, i'll download the stuff and see how it goes
wish me luck
one last question
when flashing the GB rom, i cudnt see the checked options in ODIN, it seems to me that all three options (auto partition, re-partition and i cudnt even read the last one) should be checked
yes, F. Reset Time (Force Reset Time)
all three checked
thank you so much priyana, and im soo sorry for being such a noob and wasting your time but pls bare with me
everytime i try to root the device using superoneclick the damn thing gets stuck on step no.5 (waiting for devices) is there a workaround this thing or maybe a different program, i've tried rooting my friends device using the same version of the program (his device is gt-i9100G) and it worked perfectly, why this idiot tab is giving me sooo much trouble
No need to root.
Just flash using Odin. Just start from page 7.
Rooting fix
priyana said:
No need to root.
Just flash using Odin. Just start from page 7.
Click to expand...
Click to collapse
thank you so much for your help , i was buzy the last few days but today i've done it, many thanx for your guidenese and taking the time to help a noob like me
as for the rooting i've managed to somehow get it to work
-disable the antivirus
-unmount the sd card
-download and run superoneclick
-click root
-taadaaaa
downgrade
priyana said:
No need to root.
Just flash using Odin. Just start from page 7.
Click to expand...
Click to collapse
can i downgrade from 4.0 to 2.3 by flashing the rom using odin, if its possible, what r the steps
ps im having some problems with the wifi in cm9
Hi, yes, same thing as before
use the guide, start from page 7 where the Odin screen shot is
GB-stock-safe, with pit file selected and "repartition" ticked.
But hang on, you are from middle east.
Do you have wifi cut out when a SIM card is inserted?
That is a known issue with middle eastern tab due to some wifi country code, that affects all Android 4.0
But I could be wrong, you may not have the issue.
Worth a try though:
http://forum.xda-developers.com/showthread.php?t=1445766
i am
and i've never heard about this before, it used to work ok before
all the phones in the house works ok witth the sim inserted connected to wifi
i'll give it a try anyway
back to plan B
i've downloaded a rom for saudi arabia (arabic language support) but the downloaded files is .tar.md5
how can i flash this one
Do try the fix anyway.
Sent from my GT-I9300 using xda app-developers app
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
sejtam said:
I tried upgrading my international N7000 to CM10.3 following the instructions in
http://wiki.cyanogenmod.org/w/Install_CM_for_n7000
but now the phone won't even boot into the recovery, all it shows is
Samsung
GALAXY Note
GT-N7000
/ \
/ | \
/--*-\
When i tried flashin from my Mac iusing Heimdall,
the download finished on the mac, but on the N7000
it still showed the blue line etc. I waited a lng time and tried
rebooting, but got the above.
Re-flashing in Heimdall had no effect.
I then tried flashing
hardcore-speedmod-ics-recovery-n7000.tar
using Odin 3.185 from my VMwars Fusion XP install,
and that seemed to finish ok, but no luck either.
I looked for the latest CWM 6.0.4.3 recovery, but I cannot find any
odin-flashable format for it, and of course I cannot use the sdcard
as I cannot even boot into any recovery as is.
Can anyone suggest next steps?
Click to expand...
Click to collapse
1st things 1st. Why would u use heimdall or odin? And what is your current ROM before trying to flash CM 10.3, was it stock? You should have looked for CWM recovery or Philz safe kernels as base when doing ROM flashing ESPECIALLY custom roms. From what you said, then can you still boot into download mode? I have no knowledge of heimdall so just download Stock Firmware, flash it with odin and see if you can boot your N7000 first.
The worst case scenarios is you are experiencing emmc bug-brick. go to the thread and read carefully to deduce your type of 'brick' and find solutions there. Good Luck.
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
sejtam said:
I was on a stock 4.0.4 (but rooted). I originally tried flashing the cwm from the sd card, but after starting to load it it also just hung,
so I looked for an alternative..
I found a post on stockroms (http://forum.xda-developers.com/showthread.php?t=1424997) but the links all point to hotfile.com. which my browser says it cannot find. is hotfile dead? Is there an alternative?
Click to expand...
Click to collapse
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
same problem
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
i have the same problem
conanbrapp said:
i have the same problem , only mine loads into the recovery menu , ive tried finding a working odin to nstall it back to factory.
when i had this problem last night , i wasnt sure what i done but i managed to install a custom rom and that worked but now i seem to be getting status 7 error ,
my computer wont recognise my phone so i cant do anything that way . any ideas or links to solutions will be appreciated
Click to expand...
Click to collapse
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
fixed miine
Jackwu696 said:
Go to sammymobile.com if I'm not wrong. Download the stock firmware there. Rooted but do u have cwm installed? Rooted doesn't mean you have cwm installed.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Jackwu696 said:
I'm sorry so did u succeed or did you not succeed in installing the custom rom? If your custom rom boots fine then all u need is to search for solving status 7 error thread. My advice to all noobs is to always try n avoid installimg anything except stock rom in odin. Always read and re read before flashing anything that's beyond your knowledge. Basic knowledge of flashing cusroms is :
1. ALWAYS make sure you're on SAFE and COMPATIBLE KERNEL. Most rom threads ALWAYS Include threads/links to a specific recovery/kernel to use. Read n RE READ that.
2. Wipe everything IN RECOVERY mode before flashing a rom.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
conanbrapp said:
im not Sure what i did , i unbricked (soft) and successfully installed kitkat not sure exactly how but it worked.... still have root too ... had and error about needing to wipe data for suib i think but thats the only fallback i fell into
Click to expand...
Click to collapse
If you're able to boot up properly n prompted to wipe, then do it. But do it in recovery not on device.
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
sejtam said:
Ok, I downloaded one of the stock kernels for my internatinal N7000, but flashing that with Odin 3.185 hangs about 3/4 through (has now been
sitting there for >60 mins).
Looks like I am screwed?
The file I found is KIES_HOME_N7000XXLT4_N7000OXALT4_1103517_REV02_user_low_ship.tar.md5
I f I wanted to try flashing this with Heimdall, I'd need to know partition numbers I think
Where can I get those?
Or should I get another file?
Click to expand...
Click to collapse
Before that, do u have KIES installed? KIES is NOT compatible with odin and will cause potential trouble. So is some firewall and antivirus apps. You need to disable all of them before using odin. Please search the thread http://www.sammobile.com/firmwares/ for stock rom site.
Sent from my GT-N7000 using XDA Free mobile app
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
sejtam said:
Ok. I downloaded two stock roms from sammobile:
[email protected] 1 mathias staff 808649674 May 9 10:53 N7000XXLT5_N7000MBCLT1_MBC.zip
[email protected] 1 mathias staff 750466356 May 9 10:50 N7000XXLRL_N7000OXELR5_MBC.zip
but both fail with some (unreadable, apparently character set issue) error under ODIN.
I found this:
http://droidangel.blogspot.sg/2012/01/samsung-galaxy-note-gt-n7000-all.html
which shows how to do a full flash , including PIT file, but the links again go to hotfile which seems to be down.
http://hotfile.com/dl/140099962/b9e0d63/Q1-20110914_16GB.pit.rar.html
Where can I get a) separate
CODE_N7000xxxxx_CLxxxxxxx_REVxx_user_low_ship.tar.md5
MODEM_N7000xxxxxx_REV_00_CLxxxxxx.tar.md5
GT-N7000-CSC-MULTI-xxxxxx.tar.md5
and the PIT file?
Click to expand...
Click to collapse
Of course you fail... When using ODIN, U should have downloaded the .tar. if you downloaded a zip. then unzip it first to get the tar file, then you flash it with odin. All requests are included in the stock.tar And PLEASE DO NOT Play with PIT files if you don't know what you are doing.
So now what you need to do is. :
1. DISABLE KIES (Uninstall it better), Your firewall, antivirus.
2. Install CORRECT Samsung USB driver. (Search keyword "download samsung N7000 usb drivers")
3. Unzip your zip file and extract the tar.file.
4. Run ODIN as Administrator (Right click/run as)
5. Go to download mode. connect your device to Pc/laptop.
6. Wait until Odin detects your device, click AP/PDA and choose the tar file you extracted.
7. DO NOT tick partition.
8. Let it run
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
sejtam said:
Of course I unzipped the zip to get a SINGLE .tar.md5, but flashing that fails on factoryfs about 3/4 through. consistently.
Click to expand...
Click to collapse
Try updating your odin. Use the newest vers. And try and read this https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNGd2e3iG5hkDeo0KyAjGuCSfQSLUw . If All fails then it's a confirmed SUPER-BRICK and there's nothing except samsung service centre can help you now... Sorry for not being able to help more..
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
sejtam said:
Thanks. That led me to
http://forum.xda-developers.com/showthread.php?t=1656635
where I found the PIT file, but for ROMs pointed to http://forum.xda-developers.com/showthread.php?t=1530501
which again points to hotfile and fileserve.com , which (besides being under maintenance) says
FileServe can only be used to download and retrieve files that you have uploaded personally.
which makes it useless for finding ROMs...
Click to expand...
Click to collapse
His link to ROMS were basically the same ones you can download at sammobile.