I am trying to mod a 2.2 based dialer to work on 2.3.3. I have extracted both DialerActivityTab.apk's
Then:
1) From the 2.3.3 based, I cut folders AndroidManifest, classes.dec and resources.arcs. All other (assets, META and res) files have same exact date of mod
2) From 2.2 based, I cut the same files out.
3) I then paste the 2.3.3 files to 2.2
I zipped this and put in phone (root Ex>System>app) renamed the original and paste the new DTA.apk
Interestingly enough when I tryed the dialer it went back to the previous dialer! When I go back into RE the icon matches the renamed DTA.apk
So what else can I/ should I do?
i guess the proper question here is, did you actually use apk manager to decompile all this or are you trying to do all this from a zip file manager?
Pirateghost said:
i guess the proper question here is, did you actually use apk manager to decompile all this or are you trying to do all this from a zip file manager?
Click to expand...
Click to collapse
It was all done directly through 7zip, I transfered from zip into zip (2.3.3 DAT.apk to the 2.2 DAT.apk) these were not unzipped and re zipped.
From the tone of your post... this isn't right!
tomween1 said:
It was all done directly through 7zip, I transfered from zip into zip (2.3.3 DAT.apk to the 2.2 DAT.apk) these were not unzipped and re zipped.
From the tone of your post... this isn't right!
Click to expand...
Click to collapse
When your dealing with Apks from different os versions there is alot more to it then adding missing files. What from the dialer do you want? They are pretty much the same
zelendel said:
When your dealing with Apks from different os versions there is alot more to it then adding missing files. What from the dialer do you want? They are pretty much the same
Click to expand...
Click to collapse
Thanks Zel third row down dialer. KB also matches this look so KB as well.
tomween1 said:
Thanks Zel third row down dialer. KB also matches this look so KB as well.
Click to expand...
Click to collapse
Can you post a screen shot? When you say third Row down, what do you mean? The dialer with only 3 buttons in the bottom row?
zelendel said:
Can you post a screen shot? When you say third Row down, what do you mean? The dialer with only 3 buttons in the bottom row?
Click to expand...
Click to collapse
This is the only version shown. It's in english I'm guessing, in the rom
Themes keyboard
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROMs keyboard
If it helps, here's the XDA link
http://forum.xda-developers.com/showthread.php?t=1010592
Looks like its just images. No need to do anything but swap png files.
Sent from my HTC Vision
Pirateghost said:
Looks like its just images. No need to do anything but swap png files.
Sent from my HTC Vision
Click to expand...
Click to collapse
I tried this on my first attempt, however it somehow reverted back to the one installed with the rom. What I have been doing (to swap out the original DTA.apk) is renaming it to DialerTab Activity2.apk and leaving it there in app. after palcing the newly created DTA.apk I have selected install.
As you've stated, I too thought it was a simple image swap.
tomween1 said:
I tried this on my first attempt, however it somehow reverted back to the one installed with the rom. What I have been doing (to swap out the original DTA.apk) is renaming it to DialerTab Activity2.apk and leaving it there in app. after palcing the newly created DTA.apk I have selected install.
As you've stated, I too thought it was a simple image swap.
Click to expand...
Click to collapse
You can't have it in there twice. Doesn't matter what you name the file. You can only have one dta apk in there. Remove the stock one while you are modding
Sent from my HTC Vision
Ok I'll give that a try
tomween1 said:
Ok I'll give that a try
Click to expand...
Click to collapse
Oh yeah as long as you have the same dialer set up it should just be swapping the images but if you have one of the diapers from the captivate without the video call button or a 3 button bottom row it wont be as easy.
zelendel said:
Oh yeah as long as you have the same dialer set up it should just be swapping the images but if you have one of the diapers from the captivate without the video call button or a 3 button bottom row it wont be as easy.
Click to expand...
Click to collapse
Zel I've inserted a pic of the screen installed now (part of the rom) Pic # 2. This is what you are saying is easy to reconfigure?
tomween1 said:
Zel I've inserted a pic of the screen installed now (part of the rom) Pic # 2. This is what you are saying is easy to reconfigure?
Click to expand...
Click to collapse
I dont see a pic of the one in your rom. What rom are you running? Any themed dialers?
zelendel said:
Oh yeah as long as you have the same dialer set up it should just be swapping the images but if you have one of the diapers from the captivate without the video call button or a 3 button bottom row it wont be as easy.
Click to expand...
Click to collapse
sorry, it's on post #7 with the first pic
This is where I was a week ago. attached are the two drawable-hdpi files from the rom and theme. I originally swapped everything out of the roms dialer and moved the items from the themes dialer into that file and reinserted it back into the DTA.apk and then on to the phone... Was this right. Sounds like the only thing I did wrong was to leave the original DAT.apk in the app folder (on the phone) however I did rename it.
tomween1 said:
sorry, it's on post #7 with the first pic
Click to expand...
Click to collapse
Ok I saw that one. lol Maybe I am a little confused on just what you want to do. The dialer in the pic shows one set up for video call, but most roms for the captivate have that button removed as it is point less, the theme can be brought over if that is what you like. What rom are you on?
zelendel said:
Ok I saw that one. lol Maybe I am a little confused on just what you want to do. The dialer in the pic shows one set up for video call, but most roms for the captivate have that button removed as it is point less, the theme can be brought over if that is what you like. What rom are you on?
Click to expand...
Click to collapse
Here's the link to the rom
http://forum.xda-developers.com/showthread.php?t=1010592
tomween1 said:
Here's the link to the rom
http://forum.xda-developers.com/showthread.php?t=1010592
Click to expand...
Click to collapse
Ok I just looked at the 2 files you posted, If you notice there are not the same number of files. I can do it but might not be today. If you would like what you do is after making sure the images are the same size for both, replace the images one by one instead of the whole folder. Only do the images.
tomween1 said:
Here's the link to the rom
http://forum.xda-developers.com/showthread.php?t=1010592
Click to expand...
Click to collapse
I checked that link to see what ROM you're on and it sent me to a the same theme you linked earlier.
Sent from my captivate running Speed and Looks Ginger Style
Thanks Zel ill give this a try tonight
Sent from my XDA super octane mega-phone
Related
[THEME] Rotary Style Lockscreen for EE 3.0 or CE 1.1 [UPDATED: 06/08/2010]
This is a rotary style lockscreen for use with EE or CE. The one for EE may possibly work on other ROMs. However, it could cause a boot loop if it does not work, so make a backup before trying. It may also break things non-related to the lock screen. This mod involves editing the android.policy.jar file which is why this is specific to EE 3.0 and CE 1.1. If you like this mod but it does not work right on your ROM, send me your jar file and I will mod it for you.
I got the idea for this from this thread, so thanks to JsChiSurf for the files in the thread. I initially tried just flashing his zip, and it did give me the rotary style lockscreen, but it broke a lot of other system related items. So I compared both my file and his to find where the differences were to make this modded one for EE.
You can choose either the transparent background with the date and time showing or the transparent background with only the charge status showing. I am going to try and make these with the option for a background. There is a link to a MetaMorph theme in the second post if you would like to remove the arrows while unlocking. Let me know if any of you have other suggestions.
UPDATED: I removed the flashable zip files and made some MetaMorph themes that do the job for both EE and CE. The EE lockscreen is transparent atm and comes with or without the time and date. The CE one is not transparent and shows your current selected wallpaper or live wallpaper.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions:
1. Do a NAND backup first!
2. Remove the HtcLockScreen.apk if you have not already
Code:
adb remount
adb shell mv /system/app/HtcLockScreen.apk /system/app/HtcLockScreen.bak
3. Download the appropriate MetaMorph theme
4. Apply the theme in MetaMorph
(NOTE: If your phone does not reboot or MetaMorph does not ask you to reboot, or your phone locks while applying the theme, wait 10 seconds and either pull the battery or send a reboot command.)
5. Reboot & Enjoy
REMOVE ARROWS
1. Apply this MetaMorph theme from here to remove the arrows.
ADD BLUE UNLOCK BUTTON
2. Apply this MetaMorph theme to change to a blue button --> BlueRotary.zip This is loaded in the theme from the first post now
Oh wow, DO WANT.
After people stop texting me i'm definitely flashing this
I would love this for cyanogen eris
going to try and flash it and see if it works as is, just did a nandroid backup
Hey,
Firstly thank you for making this!
ITS AWESOME!
secondly just a quick suggestion, EE has always replaced the kind of stock HTC green with a blue. would it be possible to do this with the lock/unlock button so it fits the whole EE theme?
Smoothcrm7 said:
I would love this for cyanogen eris
going to try and flash it and see if it works as is, just did a nandroid backup
Click to expand...
Click to collapse
Check out this link. You should be able to use this. I didnt test it on CE so make sure to make a NAND first before trying. I have used it on Aloysius with no issues.
http://forum.xda-developers.com/showthread.php?t=670034
Would you mind sharing what/where the changes are? I would like to make one CyanogenEris.
It's fairly straight-forward, but it involves decompiling the Java classes, replacing some of them and then recompiling. If you read stopxstart's thread for the white notification bar, you will see what I am talking about. I will put together a little tutorial later when I get home from work.
ihtfp69 said:
It's fairly straight-forward, but it involves decompiling the Java classes, replacing some of them and then recompiling. If you read stopxstart's thread for the white notification bar, you will see what I am talking about. I will put together a little tutorial later when I get home from work.
Click to expand...
Click to collapse
I know how to de-compile it. I just need to know what changes where made to the smali files. Then I can make a metamorph for CE .
Sure, It's the LockScreen class. My files are at home, but you should be able to grab it from the one I posted.
ihtfp69 said:
Sure, It's the LockScreen class. My files are at home, but you should be able to grab it from the one I posted.
Click to expand...
Click to collapse
Sweet! Just tried it .. Works! All I replaced was "LockScreen.smali" . If I don't see any errors I will post morph for CyanogenEris.
EDIT:
Ok, this is weird! Any idea why it says "SIM card is PUK-locked."? It only shows it when its plugged in to my laptop.
Try replacing the sub classes as well (I think that's what they are). There should be about five. They have the $ and integers in their name. If that does not help, then it is more ROM specific. To fix it will require editing the original smali instead of just replacing files. A Little more intense, but based on your results so far, it's possible.
Put this file in your MetaMorph theme to change the green button to cyan.
ihtfp69 said:
Try replacing the sub classes as well (I think that's what they are). There should be about five. They have the $ and integers in their name. If that does not help, then it is more ROM specific. To fix it will require editing the original smali instead of just replacing files. A Little more intense, but based on your results so far, it's possible.
Put this file in your MetaMorph theme to change the green button to cyan.
Click to expand...
Click to collapse
No dice. Every tried wipe cache. If I find a fix I will post it.
I guess your just PUK'd then. Try this one.
ihtfp69 said:
I guess your just PUK'd then. Try this one.
Click to expand...
Click to collapse
LMAO! I will give it a try tomorrow at work.
EDIT:
Just tried it. Here is my new message . Seems I am "Network locked".
And just to add. I tried hooking up to AC, it shows the same thing. Any other ideas?
This is hilarious. I need your original smali file, please.
EDIT: I installed CE 1.0 and grabbed the file I needed. Check out the update!
droidkevlar said:
Check out this link. You should be able to use this. I didnt test it on CE so make sure to make a NAND first before trying. I have used it on Aloysius with no issues.
http://forum.xda-developers.com/showthread.php?t=670034
Click to expand...
Click to collapse
just to let u guys no it wont work on cyanogen eris u will get endless boot cycle nvm guess i got proved wrong, lol
ihtfp69 said:
This is hilarious. I need your original smali file, please.
EDIT: I installed CE 1.0 and grabbed the file I needed. Check out the update!
Click to expand...
Click to collapse
I tried your update, it work but one small thing.
If I move the rotary to "Sound Off" it says "Screen Lock" then turning it back on it says "Power Off". LOL!
Yes, yes. Funny man. I know exactly where the problem is. Minor, very minor issue. The method is just referencing the wrong strings. I will fix it after work. I spent a while getting the other issue fixed. I'm an expert at logcat and Java errors now. At least they give you the line number.
By the time this is done, I will have added missed call notifications as well.
EDIT: I uploaded a new file with the strings fixed. For real this time.
ihtfp69 said:
Yes, yes. Funny man. I know exactly where the problem is. Minor, very minor issue. The method is just referencing the wrong strings. I will fix it after work. I spent a while getting the other issue fixed. I'm an expert at logcat and Java errors now. At least they give you the line number.
By the time this is done, I will have added missed call notifications as well.
Click to expand...
Click to collapse
Dude you rock! I can't wait .
All-
Attached is a version of the new DroidX Multitouch keyboard that I have themed for my new release of xtrROM. I am not a fan of white or red and I like the raised key look screen shots below.
7/13/2010 - Updated new file that has a fix for the missing "<" key under ALT. Also fixed the long press on the "(" key. Please let me know if it works
A few notes:
includes fix for the dark keypad number for when you are in a number only field such as blue tooth.
vibrate on keypress has been fixed for Eris (not sure how it will feel on other platforms)
fixed the display of the "&" from "&;amp;" in alt mode
if you long press the "?123" key it brings up keyboard settings
voice to text support works well
[Edit per thenestor]
If you're using a ROM that already has a stock Android keyboard, you have to rename this "LatinIME.apk" and push it to /system/app, overwriting the vanilla keyboard (it uses the same package name: com.android.inputmethod.latinime). If you're using a Sense-based ROM, you can install it like any old APK.
This "should" work across phone platforms and on nonrooted phones however I have not tested.
This is my first themed app so let me know if it works and enjoy!
CREDITS to thenestor for helping me find the keyboard and which libs to use and unknown for the initial pull from the DroidX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What are the prerequisites for installing this o seem to get this to work...the only thing that works for me is the flashable update on. The other thread
Sent from my Eris using XDA App
DS36 said:
What are the prerequisites for installing this o seem to get this to work...the only thing that works for me is the flashable update on. The other thread
Sent from my Eris using XDA App
Click to expand...
Click to collapse
If you're using a ROM that already has a stock Android keyboard, you have to rename this "LatinIME.apk" and push it to /system/app, overwriting the vanilla keyboard (it uses the same package name: com.android.inputmethod.latinime). If you're using a Sense-based ROM, you can install it like any old APK.
Thanks, zach.xtr! This is really cool.
will this work on CM roms?
cornbreadfarts said:
will this work on CM roms?
Click to expand...
Click to collapse
It worked on Cyanogen ELB.
Works on non-rooted RUU, looks sexy too!
thenestor said:
If you're using a ROM that already has a stock Android keyboard, you have to rename this "LatinIME.apk" and push it to /system/app, overwriting the vanilla keyboard (it uses the same package name: com.android.inputmethod.latinime). If you're using a Sense-based ROM, you can install it like any old APK.
Thanks, zach.xtr! This is really cool.
Click to expand...
Click to collapse
I am using zach.xtr's ROM and I tried pushing this (without renaming) and I cannot seem to get it to take. I didn't rename because I don't think zach.xtr's ROM uses the standard keyboard. Can you point me in the right direction? Thanks in advance.
Cary
thenestor said:
Thanks, zach.xtr! This is really cool.
Click to expand...
Click to collapse
I second this. Nice work dude.
caleris said:
I am using zach.xtr's ROM and I tried pushing this (without renaming) and I cannot seem to get it to take. I didn't rename because I don't think zach.xtr's ROM uses the standard keyboard. Can you point me in the right direction? Thanks in advance.
Cary
Click to expand...
Click to collapse
Just to make sure, did you long press in an input field after pushing the file and select the Multitouch keyboard sounding option?
zach.xtr said:
Just to make sure, did you long press in an input field after pushing the file and select the Multitouch keyboard sounding option?
Click to expand...
Click to collapse
Yes I did. And what I got was a message popup about the multi-touch getting a FC.
Cary
Updated .apk with dark keypad fix
I have updated the .apk on the OP with one that has a fix for the dark keypad number for when you are in a number only field such as blue tooth...
New version doesn't install.
Application Not Installed
So far this is pretty cool, i like the new look and the predictive texting seems to work better than vanilla.
Nikolai2.1 said:
New version doesn't install.
Application Not Installed
Click to expand...
Click to collapse
Sounds like you are trying yo install via an app manager, you probably need to push like the OP states ..... I had to because the ROM I am using had the Vanilla Keyboard already installed
Im using sense and im not rooted. I installed the original white one using adb push and the original black one from this post but this new version fails
Nikolai2.1 said:
Im using sense and im not rooted. I installed the original white one using adb push and the original black one from this post but this new version fails
Click to expand...
Click to collapse
Sounds like you may need to rename this one to be exactly the name of the prior .apk that you pushed so that it overwrites the previous file... or you can remove the old one first and then push the new.
zach.xtr said:
Sounds like you may need to rename this one to be exactly the name of the prior .apk that you pushed so that it overwrites the previous file... or you can remove the old one first and then push the new.
Click to expand...
Click to collapse
Lol that's what I did. I erased it then installed it. No luck.
Nikolai2.1 said:
Lol that's what I did. I erased it then installed it. No luck.
Click to expand...
Click to collapse
Hum... i am at a loss then anyone else having issues?
Oh what ROM are you on?
Sent from my Eris using XDA App
zach.xtr said:
Hum... i am at a loss then anyone else having issues?
Oh what ROM are you on?
Sent from my Eris using XDA App
Click to expand...
Click to collapse
I'm just on stock. I haven't rooted.
Does anyone know the push command?
I'm not sure if I'm doing it right.
adb push LatinIME.apk /system/app/
?
EDIT: Oh nevermind. It's right as long as you have the apk in the /tools directory
Hi,
This is my first bootscreen that i made. I called it Drawing eclair since i use the original eclair logo from google. They already make a good logo so why dont we use it
I tested this bootscreen GSM Hero with Chocolate Eclair and Vanilla Eclair, i hope it works on any ROM (please let me know). And I hope you all like it
Edit :
[BOOTSCREEN] Drawing Froyo <<< my new boot animation
Nice Good idea
Here's a gif for a better preview
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BTW this will not work for sense ROMs but I think it wil work for (almost) all Froyo and vanilla ROMs
That's pretty awesome. Going to give it a try.
Very nice I like it you should make a Froyo now since I just moved to it
C0mpu13rFr34k said:
Here's a gif for a better preview
Click to expand...
Click to collapse
thanks a lot for the preview
C0mpu13rFr34k said:
BTW this will not work for sense ROMs but I think it wil work for (almost) all Froyo and vanilla ROMs
Click to expand...
Click to collapse
BTW its work on my Chocolate Eclair right now and its senseROM
MentalDeath said:
Very nice I like it you should make a Froyo now since I just moved to it
Click to expand...
Click to collapse
still working on it
aankun said:
still working on it
Click to expand...
Click to collapse
it's okay I went back to my Eclair
Hello I don't have a hero but wanted to try this out. When I opened the zip fle, it contains metadata for mac (the __MACOSX folder). Does this affect flashing on your heros?
PS.
I'll actually create my own recovery .zip file but i'm curious about that..
kenshinta said:
Hello I don't have a hero but wanted to try this out. When I opened the zip fle, it contains metadata for mac (the __MACOSX folder). Does this affect flashing on your heros?
PS.
I'll actually create my own recovery .zip file but i'm curious about that..
Click to expand...
Click to collapse
I'm not an expert on this, but it's look OK on my Hero And since I use OSX I can't see this folder
aankun said:
BTW its work on my Chocolate Eclair right now and its senseROM :confused
Click to expand...
Click to collapse
Oh okay then that's an exception But non other than that i'm 99% sure since the bootscreen in other ROMs is located in a different directory
Great work BTW I forgot to say xD
how to make this work? i flashed it and nothing happens ):
Hmmm....
C0mpu13rFr34k said:
Oh okay then that's an exception But non other than that i'm 99% sure since the bootscreen in other ROMs is located in a different directory
Great work BTW I forgot to say xD
Click to expand...
Click to collapse
ahh.. different directory. You are right. After i re-flash my chocolate eclair and then apply the boot animation, it didn't work. And I found another bootanimation.zip file on system/customize/resource/
I added some lines on the install script to delete the file first and then copy the new bootanimation file. Its working now (I think...) Correct me if I'm wrong
aankun said:
ahh.. different directory. You are right. After i re-flash my chocolate eclair and then apply the boot animation, it didn't work. And I found another bootanimation.zip file on system/customize/resource/
I added some lines on the install script to delete the file first and then copy the new bootanimation file. Its working now (I think...) Correct me if I'm wrong
Click to expand...
Click to collapse
That will probably work but there's no need to delete other files than the original bootanimation.zip or if you want it to work for every ROM the bootanimation.zip in all directories where it could be (did that make sense?) (Can't test it since i'm running Cronos Froyo...)
whoops I misread something my bad
MentalDeath said:
whoops I misread something my bad
Click to expand...
Click to collapse
Why do you quote me for that? By accident?
C0mpu13rFr34k said:
Why do you quote me for that? By accident?
Click to expand...
Click to collapse
He was probably fast on the edit button
Summered said:
He was probably fast on the edit button
Click to expand...
Click to collapse
Ya I edited it but didn't think of deleting the quote which I'll do now.
Welcome to the Serendipity Add-on/Mods Kitchen!The kitchen's purpose is to provide an easy to use Add-on/Mod implementation. You simply pick the things you would like to include.
Then you are presented with a Flashable .zip file. Follow the instructions bellow and your done.
Update: The Kitchen has been closed. Send me a private message for anything you need.
Installation:
1. After you make your selections, a file is presented for download.
2. Drop the Serendipity.zip as is onto the SD card.
3. Reboot into recovery.
4. Select Install .zip from SD
5. Select .zip on SD
6. Confirm install
7. Reboot
8. Enjoy!
Click to expand...
Click to collapse
If you have any problems please report them here!
Please Post your build number given to you with your download.
Don't have Serendipity but feel your ROM would benefit from a customized kitchen?
Feel free to contact me at www.Android-Dev-Roms.com.
Serendipity Signature!
Tired of trying to keep up with the ever changing version number of Serendipity in your signatures?
By placing this image code in your signatures you will get a dynamically updating Serendipity image! See it below! Replace "(" & ")" with "[" & "]"
Code:
(IMG)http://www.android-dev-roms.com/sig.png(/IMG)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First.
So Chance, how about my question on changing the font color?
xdahgary said:
First.
So Chance, how about my question on changing the font color?
Click to expand...
Click to collapse
Oh sorry haven't looked at it sorry been busy with everything
ChanceM said:
Okay I will be swapping out the red text for white all the way to 0.
Click to expand...
Click to collapse
lol. that wasn't me, but thanks I also like white all the way to zero on the android battery mod. My question was on how to change the color of the sub text in the Settings menu. It's probably some tweaking of some xml file. metamorph maybe?
chance, im assuming this comes with the latest serendipity as well?
edit, downloaded see its just an updater. thank you for your hard work, this is awesome
I cant download using my phone because the download button is hidden by ads when i view the site on the mobile browser. This happens in both mobile and full views.
wibs said:
I cant download using my phone because the download button is hidden by ads when i view the site on the mobile browser. This happens in both mobile and full views.
Click to expand...
Click to collapse
Very Sorry! I have pushed them as far right as possible let me know if that works better. Sorry for the Ads just trying to pay for the hosting for the kitchen.
Works now when viewing the full site, still not the mobile but that isn't a big deal. I understand the need for the ads though! What better way to get clicks than to cover up the submit button
now though it is giving me an error "content error - the requested file is too large for conversion in the gateway/proxy". Sorry for causing all this trouble! Is there anything i can do to help?
Just want to say thanks for all of your hard work new to the ROM thing here , love Serendipity makes my phone run 1000% better than before!
Now to find the equivalent of Serendipity for my wife's xperia x10a
BTW funds are low right now but I plan on making a donation soon
Just updated to 5.10 and tried out the Add-on Kitchen for the first time. Very impressed and thanks for streamlining! No problems to report at this time.
So I've been working hard to change the look of my phone. I came across this post under the i9000 themes forum for VA Green:
http://forum.xda-developers.com/showpost.php?p=11129613&postcount=811
After some tinkering I got this nice epic unlock. But the Orb and Glass unlock kept the month and date. So can anyone help me with remove that? I don't know how to edit xml, but I'm willing to learn.
xdahgary said:
So I've been working hard to change the look of my phone. I came across this post under the i9000 themes forum for VA Green:
http://forum.xda-developers.com/showpost.php?p=11129613&postcount=811
After some tinkering I got this nice epic unlock. But the Orb and Glass unlock kept the month and date. So can anyone help me with remove that? I don't know how to edit xml, but I'm willing to learn.
Click to expand...
Click to collapse
The layouts for the lockscreens are in the framework-res.apk so decompile that and then try removing the <textview> that correspond to the date and time.
Used rom kitchen for the first time today. Was excellent and worked like a charm.
Sent from my Captivate
ChanceM said:
The layouts for the lockscreens are in the framework-res.apk so decompile that and then try removing the <textview> that correspond to the date and time.
Click to expand...
Click to collapse
Yeah, racked my brains out. How do I decompile?
xdahgary said:
Yeah, racked my brains out. How do I decompile?
Click to expand...
Click to collapse
try these http://code.google.com/p/android-apktool/
Okay I have changed
Version A
Version D
Version Droid
Gingerbread
They are now 100 - 0 in all white.
Cheers,
ChanceM
Nice work Chance. This was great to build a mod update pack.
Running rgb v4 kernel and serendipity 5.10. The update packages compiled thru ur site aren't updating the mods I select. Haven't tried an app but the batt mod, clear not, animations do not change
Edit: 2.6.32.9 build on the kernel
Nice work Chance x4. U 2 are what make this rom so good.
MBC663 said:
Running rgb v4 kernel and serendipity 5.10. The update packages compiled thru ur site aren't updating the mods I select. Haven't tried an app but the batt mod, clear not, animations do not change
Edit: 2.6.32.9 build on the kernel
Nice work Chance x4. U 2 are what make this rom so good.
Click to expand...
Click to collapse
I need the build number from the kitchen so I can look at the log.
Edit tested all of the above and its working fine. Was there an assert error?
Themes for 3.1.0-0. and 3.1.1-0. I've replaced the swipe action with a button so now it's all touch. The lock screen itself is also now one big button, you can touch anywhere to unlock it.
Batman
Forest
Skeleton
Storm
Hulk
You can install these manually or in recovery:
Manual:
go to your TWRP folder and create a new folder
name this new folder "theme"
after downloading the theme you want place it in this folder
rename the theme to "ui"
reboot into recovery and enjoy!
This is case sensitive be sure to use lower case and without the quotes.
Recovery:
As of 3.0.1-0 you can install these as if your where flashing something.
Keep in mind that this does overwrite the ui.zip in your TWRP theme folder so if you have a theme already your might want to rename it first!
Thanks to @z31s1g
The use of his themes and studying the xmls has been a great help.
Link to his thread: http://forum.xda-developers.com/and...light-play-t2915584/post66276401#post66276401
Thanks to the TWRP team for this recovery
Sceenshots in second post!
Storm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Skeleton
Forest
Batman
Skeleton/Wipe Page
Hulk
biglil1 said:
View attachment 3704969
View attachment 3704970
View attachment 3704971
View attachment 3704972
Click to expand...
Click to collapse
Very nice and thank you for this!
Sent from my Note 8
Welcome!
Applying theme
biglil1 said:
In your TWRP folder create a folder and name it "theme". After downloading place the zip file in the theme folder and rename it to ui without changing the file extension.
I created a Batman, Storm, and a Skeleton theme for your enjoyment.
The swipe action has been replaced with a button; it's all touch.
STORM
BATMAN
SKELETON
Sceenshots in second post!
Click to expand...
Click to collapse
I've never adjusted any settings in twrp. How do I apply them?
I figured it out.. Thanks. Looks great!
Wow! The Skull theme totally rocks. Great job!
Sent from my Nexus 6 using XDA-Developers mobile app
kwdan said:
I've never adjusted any settings in twrp. How do I apply them?
I figured it out.. Thanks. Looks great!
Click to expand...
Click to collapse
Follow the OPs instructions. Its pretty straight forward
Sent from my Nexus 6
ShapesBlue said:
Follow the OPs instructions. Its pretty straight forward
Sent from my Nexus 6
Click to expand...
Click to collapse
Thanks for the assist, I'm on break (at work) and was just now able to check.
biglil1 said:
Thanks for the assist, I'm on break (at work) and was just now able to check.
Click to expand...
Click to collapse
Not a problem. Glad I could help
Sent from my Note 8
Any chance you could make MultiROM versions too?
ShapesBlue said:
Follow the OPs instructions. Its pretty straight forward
Sent from my Nexus 6
Click to expand...
Click to collapse
Actually.. Never said how to flash. Just says create theme folder and put zip in there and rename. I was thinking that just by going to recovery it would apply automatically. I figured it out though. I used Batman... Now I want to keep booting to recovery.. Lol
kwdan said:
Actually.. Never said how to flash. Just says create theme folder and put zip in there and rename. I was thinking that just by going to recovery it would apply automatically. I figured it out though. I used Batman... Now I want to keep booting to recovery.. Lol
Click to expand...
Click to collapse
True but there isn't a need to flash anything. It's a matter of adding a folder, renaming a file and that's it. It worked for me
Sent from my Nexus 6
The best part about this is no flashing is required. So easy.
Sent from my Nexus 6 using XDA-Developers mobile app
Thanks everybody for your feedback and helping others while I'm stuck at work. I didn't think it needed to be specified in the OP that this isn't a flashable zip but I'll put that in.
ShapesBlue said:
True but there isn't a need to flash anything. It's a matter of adding a folder, renaming a file and that's it. It worked for me
Sent from my Nexus 6
Click to expand...
Click to collapse
Wow! I'm on the latest Twrp(3.0.1).I'm pretty sure i had to flash mine. I tried just renaming, rebooting recovery and that didn't work. I'm going to change it (put a different one in) and see if it changes.
This is what I see now ( I only created one)
Crazy!! I deleted one and they both disappeared
Okay..switched to skeleton.. It changed no flashing. I believe the first one I created I used capital letters.. That may have been the problem. Thanks everyone for clearing that up For me
kwdan said:
Wow! I'm on the latest Twrp(3.0.1).I'm pretty sure i had to flash mine. I tried just renaming, rebooting recovery and that didn't work. I'm going to change it (put a different one in) and see if it changes.
Click to expand...
Click to collapse
Didn't have to flash anything here, I'm also on the newest twrp. Just followed the instructions in the OP and it worked
Sent from my Nexus 6
kwdan said:
Wow! I'm on the latest Twrp(3.0.1).I'm pretty sure i had to flash mine. I tried just renaming, rebooting recovery and that didn't work. I'm going to change it (put a different one in) and see if it changes.
This is what I see now ( I only created one)
Crazy!! I deleted one and they both disappeared
Okay..switched to skeleton.. It changed no flashing. I believe the first one I created I used capital letters.. That may have been the problem. Thanks everyone for clearing that up For me
Click to expand...
Click to collapse
Both the theme folder and the renaming are case sensitive make sure it's all lower case. Also make sure that when remaining you don't add an extra .zip. It should look like:
ui.zip
not
ui.zip.zip
I looked at the xmls for 3.0.1.0 and I do need to update these to that but that's not the issue. I'm running it now with my Batman theme with no issues. Tested all three of them. Hopefully I'll have time to update them when I get home.
Downloads are failing.
Edit: never mind.
Sent from my Nexus 6 using Tapatalk
brando56894 said:
Any chance you could make MultiROM versions too?
Click to expand...
Click to collapse
I barely have time for these so as of now no
Updated OP with themes for 3.0.1.0