Hello!
Today, i decided to install cyanogemmod on my 2x. So i downloaded ROM manager and downloaded cyanogenmod. everything went fine until i was going to boot for the first time. I got into a bootloop. so i tried taking out the battery and all that stuff but it still would't work. So i tried to recover the phone. I recovered it to a month old backup (I could not find the one i made in ROM manager before i installed cyanogenmod) The recovery went fine. But, when i rebooted it got into a loop on the lg logo! (the one without the loading bar) it would just load the lg logo, be there for like 10sec, then it would do the same. I tried recovering one more time, but it didn't work. The same thing happend. What should i do? :S Should i wipe data/factory reset?
EDIT: My phone was on android 2.3.4 before i download cyanogenmod.
BTW before i installed cyanogenmod, i forgot to clear cache and data. I was in a hurry so i did't notice the screen popping up, I automatically pressed "ok" without selecting anything.
Thanks for the help
- Kashif
Different partitions... Look for something called backtoext3 in the dev section (or somewhere else) The problem is that when you flash a custom rom like CM you convert your filesystem to EXT4, while stock is EXT3.
So basically what you have to do is:
1) Reboot into recovery
2) Wipe everything
3) Flash Backtoext3 zip
4) Restore Nandroid.
This should work. this will take you back to stock.
So i have to restart the phone, Choose wipe data/factory reset, then flash backtoext3 (how do i do it? lol) then restore nandroid (the backup i just tried to restore twice?)
kashi169 said:
So i have to restart the phone, Choose wipe data/factory reset, then flash backtoext3 (how do i do it? lol) then restore nandroid (the backup i just tried to restore twice?)
Click to expand...
Click to collapse
Yes
Flashing backtoext3 is just flashing the zip file you put on the sd card. (and then install zip from SD ) an then restore your nandroid stock backup and you're back on stock.
But you said you wanted to try CM right? In that case, wipe everything (factory reset/data + cache + dalvik) and then flash the CM7 rom and you have CM! Don't worry about backtoext3, your partitions are already on EXT4, because of your prior CM flash.
Ohh! Thanks Can you send the files for cm (2.3.4)? I've found some, but im not sure if my phone is compitable with them :S im really afraid to mess something up again
My. Signature. (CM7 temasek's KANG = the best CM7 at the moment )
I did everything and i got into a bootloop at the skating andriod screen again
OK, restored my phone back... Now it wont connect to the network and the battery has a question mark inside it. It also says the battery level is 999% heelp
Nvm, got my phone back to normal still dont understand why cm wont work...
You need cwm5 to flash cm.
I have a G2x, which is basically the same phone. But anyway, I would recommend nvflashing CWM and not getting it from ROM Manager.
CWM 5.0.2.0 will do just fine, but it is indeed old...
Anyway, are you sure you waited long enough on the CM boot screen? The first boot might take a couple of minutes. (4 or 5)
My phone was bricked yesterday. Then I used SMF to recover, so I turned back to v10a. (from smart flash tool)
Installed Rom manager rooted and installed marvel rom.
Then I tried miui 2.1 rom.
Then i tried to restore my backup(marvel) what i did with rom manager. Phone bricked again.(Blue screen on android)
Then I used SMF to recover again. --> v10a.
Now in rom manager pressin flash cwm button in menu but nothing happens. I rooted phone. Root is workin well in other programs like Titanum. Tried reboot into recovery causes factory reset bcs of cwm i think.
Any way to solve this problem? Or can I install zipaligned rom like marvel, zeus without cwm? Like S/E tool. Power + volumeUp...
Did you do all the wipes before flashing the rom?
Didn't you missed any step?
I cant see even recovery menu. To wipe data/dalvik.
I coulnt flas cwm, so when Im trying to do reboot into recovery via Rom Manager, skips that menu(controlled with volume and power buttons dont know the name) and v10 is booting with factory reset.
Do you have an internet connection when trying to flash cwm?
Trolling in the deep
Just root it again, reboot, install busybox, reboot, install cwm and all should work just fine
Sent from my LG-P970 using Tapatalk
Yes I had internet. I installed Rom Manager from market.
I will follow this link. It gives you offical 20o Rom rooted and touch version of cwm. Hope it will work for me.
And I realized that I really missed LG's UI.
http://forum.xda-developers.com/showthread.php?t=1480392&page=20
You probably forgot "wiping" before restoring your nandroid. Any this shall be a lesson. From now on you won't forget.
had the same problem before, i always had a bug installing CWM, caused factory reset everytime , but when i downloaded it again it works well..
Pondera said:
You probably forgot "wiping" before restoring your nandroid. Any this shall be a lesson. From now on you won't forget.
Click to expand...
Click to collapse
I've never wiped before restoring a nandroid, and believe me I've flashed my OB a lot while i was debuting my Lezo mod.
Trolling in the deep
I solved the problem. Now I have offical 20o ROM offical and rooted. Happy with that. Until stable CM7 or MIUI release I will stop trying ROMS.
Hi folks,
I tried updating my S plus to ICS today by following the instructions listed here:
theandroidsoul.com/galaxy-s-plus-i9001-ice-cream-sandwich-update-install-cyanogenmod-9-cm9-pretty-good-and-working-rom
I read through the instructions and it looked pretty simple. I successfully installed Team Win recovery, performed a backup, wiped, and then installed the CM9 rom.
After the installation, the phone just boots back into Team Win recovery. I tried reverting to the backup, but it still just boots to recovery every time.
Now that I'm stuck in TeamWin recovery, I'm at a loss on what to try next .
Does anyone have any insight on how I can fix the problem?
Thanks,
Evan
Sometimes when you flash new Recovery (usually when replacing stock recovery with modified recovery for the first time) you get stuck at bootloop. It means /boot partition was damaged. After flashing TWRP did you restart your phone and it booted correctly, or did you install everything (TWRP, got backup, wipe and install new ROM) at once?
There is a guide for i9001 bootloops
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Boot-loop
divibyzero said:
Sometimes when you flash new Recovery (usually when replacing stock recovery with modified recovery for the first time) you get stuck at bootloop. It means /boot partition was damaged. After flashing TWRP did you restart your phone and it booted correctly, or did you install everything (TWRP, got backup, wipe and install new ROM) at once?
There is a guide for i9001 bootloops
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_Plus/GT-I9001#Boot-loop
Click to expand...
Click to collapse
So is reflashing in Odin what you are suggesting? Sorry if I'm misunderstanding.
And yes, after I flashed TWRP it booted fine, the 2nd time I went into recovery, performed the backup, wiped, then flashed the rom. I've tried wiping both the cache's with no success. I've also tried reflashing the rom, wiping the cache's, restoring with the backup, wiping cache's again... nothing seems to be working
What would be different if I had installed everything (TWRP, backup, wipe, rom) at the same time?
*Edit* Reflashed through Odin and it worked great! Thanks for the help, I'm a little scared to start messing with the phone again, but ICS is tempting...
Got the rom working with a fresh backup after fixing the bootloop. Thanks again for the link divibyzero, the troubleshooting steps solved the problem, whatever it was, and now its running ICS
These Samsungs S+'s seem to be a little more finiky than my HTC.
I am still stuck in CWM Recovery mod ! When I start Download mode, I dont have ODIN option ..only Download mod start screen! Can anybody help me?
Dapper SRB said:
I am still stuck in CWM Recovery mod ! When I start Download mode, I dont have ODIN option ..only Download mod start screen! Can anybody help me?
Click to expand...
Click to collapse
What do you mean by "don't have ODIN option"?
Is bootloader.tar which used to repair bootloop problem usable on ICS roms for SGS+??
alireza7991 said:
Is bootloader.tar which used to repair bootloop problem usable on ICS roms for SGS+??
Click to expand...
Click to collapse
yup, you can use bootloader or http://forum.xda-developers.com/showpost.php?p=32655216&postcount=17 CWM with AriesVe.ops
evan8683 said:
Hi folks,
I tried updating my S plus to ICS today by following the instructions listed here:
theandroidsoul.com/galaxy-s-plus-i9001-ice-cream-sandwich-update-install-cyanogenmod-9-cm9-pretty-good-and-working-rom
I read through the instructions and it looked pretty simple. I successfully installed Team Win recovery, performed a backup, wiped, and then installed the CM9 rom.
After the installation, the phone just boots back into Team Win recovery. I tried reverting to the backup, but it still just boots to recovery every time.
Now that I'm stuck in TeamWin recovery, I'm at a loss on what to try next .
Does anyone have any insight on how I can fix the problem?
Thanks,
Evan
Click to expand...
Click to collapse
Hello guys,
I think have the same problem, this morning I installed the Team Win recovery and after a reboot my phone come into recovery mode and even after a furthr reboot I'm blocked in a bootloop that leads me always on Team Win recovery.
I tried to wipe cache, dalvik cache, factory reset and even a wipe of the system but nothing happen.
I reinstalled rom but without success.
There is a way to fix this through adb?
Advanced thanks for help
Max.
krisslake said:
Hello guys,
I think have the same problem, this morning I installed the Team Win recovery and after a reboot my phone come into recovery mode and even after a furthr reboot I'm blocked in a bootloop that leads me always on Team Win recovery.
I tried to wipe cache, dalvik cache, factory reset and even a wipe of the system but nothing happen.
I reinstalled rom but without success.
There is a way to fix this through adb?
Advanced thanks for help
Max.
Click to expand...
Click to collapse
You didn't specify, so I'll assume you have an i9001, if this is not the case, you probably shouldn't follow these instructions
Just reflash the bootloader as explained here (http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330) and you'll be fine. I had the exact same problem when I had installed CWM on my own device. It's not with adb, but it's not like you have to do a lot of effort to get Odin or anything and it will fix your device.
Marshian said:
You didn't specify, so I'll assume you have an i9001, if this is not the case, you probably shouldn't follow these instructions
Just reflash the bootloader as explained here (http://forum.xda-developers.com/showpost.php?p=24831012&postcount=1330) and you'll be fine. I had the exact same problem when I had installed CWM on my own device. It's not with adb, but it's not like you have to do a lot of effort to get Odin or anything and it will fix your device.
Click to expand...
Click to collapse
Luckily I found a windows system
Istructions you report was perfect for my case...seem I solved my problem...thanks again.
There is some i need to do for report I solved my problem ?
Bye Max.
[Boot-Loop] Can I use dd to flash bootloader?
Guys, has anyone tried to use dd to flash bootloader partition?
I assume dd if=boot.img of=/dev/block/mmcblk0p8 bs=512 should work
Can somebody attach boot.img taken with dd so I could test?
error - can t acces system csc/cnx/system
hello. I have a problem. I had installed on the phone cm10. Now I switched to cm 9 but since we locked in botloader and I returned with odin. recowery mode now you did not have the option install from sd / card only update. My problem is that now go phone but I can not install gapps. ie install it says the installation is complete, restart give when I see me many times with yellow writing including my error appears so: can t access system csc / CNX / system. and after I start the application from google. to say you've tried many variations and if you try recovery-clockwork-5.5.0.4-phone crashes every time. Please help ... (I tried many variations of gapps). thanks in advance.back with another caveat: any clockwork I try to install say installation aborted. and in the recovery mode screen down to write I / / / status = 0 / / /
evan8683 said:
So is reflashing in Odin what you are suggesting? Sorry if I'm misunderstanding.
And yes, after I flashed TWRP it booted fine, the 2nd time I went into recovery, performed the backup, wiped, then flashed the rom. I've tried wiping both the cache's with no success. I've also tried reflashing the rom, wiping the cache's, restoring with the backup, wiping cache's again... nothing seems to be working
What would be different if I had installed everything (TWRP, backup, wipe, rom) at the same time?
*Edit* Reflashed through Odin and it worked great! Thanks for the help, I'm a little scared to start messing with the phone again, but ICS is tempting...
Click to expand...
Click to collapse
Hi Evan which release of Odin did you use I am also facing the same problem for the past 28 hours and not been able to resolve it. The problem is thay the Com Port does not pop up basically the phone is not being recognised by the computer.
Please help.
sunbaj said:
The problem is thay the Com Port does not pop up basically the phone is not being recognised by the computer. Please help.
Click to expand...
Click to collapse
You must properly install Samsung mobile drivers on your PC, kill Samsung Kies process (or even better: uninstall Kies) and enable USB debugging on your phone. Then it will work.
tetakpatak said:
You must properly install Samsung mobile drivers on your PC, kill Samsung Kies process (or even better: uninstall Kies) and enable USB debugging on your phone. Then it will work.
Click to expand...
Click to collapse
The problem was that I was using Windows 8. I was able to resolve the issue after doing it on Windows XP.
So my friend tried to install a new custom rom on my phone, NATURALIZER and booted it in rec mode and cleared partitions and stuff and then installed the rom from SD card which was successfull. then it reebooted and wont start now...only boots in rec mode and shows that screen with options of clearing partitions and wipe data install update etc. but wont work beyond that coz the new rom doesnt boot...what do i do? please help
amnrox said:
So my friend tried to install a new custom rom on my phone, NATURALIZER and booted it in rec mode and cleared partitions and stuff and then installed the rom from SD card which was successfull. then it reebooted and wont start now...only boots in rec mode and shows that screen with options of clearing partitions and wipe data install update etc. but wont work beyond that coz the new rom doesnt boot...what do i do? please help
Click to expand...
Click to collapse
What partitions did you cleared? maybe /system?
Reflash the rom
From yesterday, I cannot enable wifi. So i decided to change the rom. After I change the rom, my phone is rebooting constantly. It reach to the desktop and reboot . What should I do? Help me please!
St3listu96 said:
From yesterday, I cannot enable wifi. So i decided to change the rom. After I change the rom, my phone is rebooting constantly. It reach to the desktop and reboot . What should I do? Help me please!
Click to expand...
Click to collapse
Wipe data from recovery
If is still rebooting, wipe data again and flash stock rom / custom rom.
Stock Rom
Flash stock rom... Also if you want something better search for cyanogenmod 10.1 by bleached. Its almost no bugs working camera and camcorder. There is a cwm recovery 6.0.3.2 in the downloads section which is perfect for your backups. Also recovery rom have full internal storage mounted so its not like thewhisp's CM...