Related
Hi,
I really need some help as I began to get crazy about this.
I also have to mention it's my first time into Root/Mod/Custom/etc...
I Have a GT-I9000M (BELL) with Android 2.2 (version FROYO.UGJK4) Kernel 2.6.32.9
I successfully Rooted the phone with Superoneclic (Have Super User app in menu)
I Installed Rom Manager 3.0.0.0 Then authorized sudo when prompted to do it.
After that in the recovery menu of Rom Manager i've downloaded the Clockworkmod thing. (2.5.1.2)
I've tried to boot into clockworkmod but I got the standard Recovery Boot from Samsung instead. (tried to re-install rom manager to see if work but no)
I also tried to install it by using the update.zip version got here http://www.multiupload.com/5CUIK88JM0 and put it at the root of the internal sd.
Booted into the Samsung Recovery Boot and press apply Update.zip then i got
the following error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborded
(Tried Twice still nothing new)
The goal of all this is to install Darkys_v6.0_Gingerbread_Edition_Voodoo_signed seen here: http://forum.xda-developers.com/showthread.php?t=814091
What do I do wrong???? Help me please i'm tired of the Android Froyo version from Samsung+Bell
To get ClockWorkMod compatibility, you need to use ROM Manager to start them.
This way, Voodoo recognize it's CWM recovery, intercept the call to the update.zip and install Ext4 wrappers.
If the new version is not yet available in ROM, be patient
I found the recovery app doesn't work very well. I suggest installing a kernel with CWM , that's compatible with Bell hardware? via Odin and you're good to go. From recovery menu you can do anything, including a full backup.
Supercurio I Need Help
MOD EDIT: Teranox, our forum rules specifically state that non-engish posts are allowed only if an english translation is provided as well. Please add that here, or the post will be removed
supercurio this one is for you:
What is voodoo
i'm using Rom Manager but notjing seems to work. even OCLF
it's like even if i'm rooted i can't do anything....
can't use lagfix
can't use le clockworkmod
can't use le rom de darky....
you seem enough advance in android to answer me (I saw you post & video on the Nexus S ported to SGS)
Thank you to answer me
You must be in 2e recovery for CWM
Sent from my GT-I9000 using XDA App
jsen said:
You must be in 2e recovery for CWM
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
How to get from 3 to 2e? I'm on JPO 2.2. Thanks
It is not the first time i heard about 2e recovery and cwm
thing is: i'm new to all of this. Can someone explain me what those 2 things mean and do?
Do you mean that i have everything to do it right but there is something i do wrong or forgot?
mirzahodzic said:
How to get from 3 to 2e? I'm on JPO 2.2. Thanks
Click to expand...
Click to collapse
You can find the thread called 'CFroot' at the android development section.
Download the correct version based on your current firmware and follow the instructions there. When you are done, your recovery would be 2e.
Sent from my GT-I9000 using XDA App
My only concern after had read cf-root post is that none of the zip package offer somethong for ugjk4
Teranox said:
My only concern after had read cf-root post is that none of the zip package offer somethong for ugjk4
Click to expand...
Click to collapse
Sorry dude, the only solution would be to flash to an Eclair ROM (which by default has a 2e recovery) or flash Froyo which is supported by CFroot.
I have the same issue as well. Wanted to try Darky's v6.0 rom, however stucked in getting to CWM since I'm on 3e. I did look at CFRoot, but nothing stated for JK4.
Teranox said:
Hi,
I really need some help as I began to get crazy about this.
I also have to mention it's my first time into Root/Mod/Custom/etc...
I Have a GT-I9000M (BELL) with Android 2.2 (version FROYO.UGJK4) Kernel 2.6.32.9
I successfully Rooted the phone with Superoneclic (Have Super User app in menu)
I Installed Rom Manager 3.0.0.0 Then authorized sudo when prompted to do it.
After that in the recovery menu of Rom Manager i've downloaded the Clockworkmod thing. (2.5.1.2)
I've tried to boot into clockworkmod but I got the standard Recovery Boot from Samsung instead. (tried to re-install rom manager to see if work but no)
I also tried to install it by using the update.zip version got here http://www.multiupload.com/5CUIK88JM0 and put it at the root of the internal sd.
Booted into the Samsung Recovery Boot and press apply Update.zip then i got
the following error:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborded
(Tried Twice still nothing new)
The goal of all this is to install Darkys_v6.0_Gingerbread_Edition_Voodoo_signed seen here: http://forum.xda-developers.com/showthread.php?t=814091
What do I do wrong???? Help me please i'm tired of the Android Froyo version from Samsung+Bell
Click to expand...
Click to collapse
This Might Work.... Although I Have A Different Phone (Cdma Hero), But Had A Similar Issue....
The Way I Was Able To Correct My Problem Was To Re-Install A Older Version Of "Rom Manager" (Let Me Know If You Have or Need A Older Version, I Keep'em All Now!! Lol!!
Also In "Rom Manager" I Would Try To Flash Alternate Recovery, And Then Clockwork Recovery Right After!! Make Sure It Says *Current Recovery* -And- *Latest Recovery* (Up At The Top) Then Try To Boot Into Recovery!!
PM Me If You Need More Help!!
Sent from my HERO200 using XDA App
Fresh Start
Ok well I got a good night of sleep so i'll resume where I am
I learned yesterday the following:
CMW: Clockworkmod
OCLF: One Clic Lag Fix
Now what I could try is to get back to Original Firmware of the GT-I9000M (Eclair) and from then what I've understood is that I don't need 2e recovery? Am I right?
From then I could install Darky without anything.
By going back this way will i'll stay root of will I have to root again?
If all this is right, how do i go back to eclair? can it be done via the 3e recovery menu or I have to flash? Is so I don't know anything about odin and the way it work so i'll need your help loll
rafi92 said:
Sorry dude, the only solution would be to flash to an Eclair ROM (which by default has a 2e recovery) or flash Froyo which is supported by CFroot.
Click to expand...
Click to collapse
here's what I did now:
Used Odin and Flashed my firmware to the previous one (2.1 Eclair.UGJH2)
Re-rooted
Re-installed Rom Manager
When in recovery mode i see 2e but it's the recovery from Samsung. Can't see the CWM......
Think i'm pretty close compared to yesterday from Darky 6.0 but STILL NEED CMW lolll
Fist timer Root and Flash never easy lolll
OK GUYS GOOD NEWS!!!!
Don't know what I did but CWM WORK NOW!!!!
What i've read somewhere is to never open the zip files (what i did). Got the idea of flushing them and download it again. This time it worked.
Gonna let you know when running Darky
----!!!!WORKING!!!!----
I Have Darky 6.0 Running on my Bell GT-I9000M!!!!!
First I want to thanx everyone of you who helped me out! You've been a great help.
Also I want to get the summary of my actions so Others could take advantage of this thread.
-Froyo version FROYO.UGJK4 (that is the official GT-I9000M update from BELL Mobility) was painfull to do anything so I downgraded to the eclair.UGJH2 (that is the Original Firmware from Bell)
First I've Rooted my phone using Superoneclic 1.5.5.0 that you can find here:
http://forum.xda-developers.com/showthread.php?t=803682 (enable debuging mode on the phone in Settings-applications-developpement-debuging) then plug the phone and on superoneclic press ROOT...wait and follow indications
Then went to ODIN 1.7 that you can find here
http://www.general-search.com/fileinfo/20192867
You can find the BELL 2.1 firmware
here http://www.multiupload.com/ZNBT2RY5Y0 Password is samsung-firmwares.com
In odin i've used the 512.pit file (place it in the Pit section)
Then placed the 2.1 Firmware in the PDA section.
Took care Repartition, auto-reboot, F.Reset Time check box was check.
Booted in download mode (to get it right with odin i've booted in recovery first: Vol Up+Home+Power when bootscreen appear released it. After Pressed on Reboot now and immediatly pressed Vol DOWN+HOME+Power) I GOT THE BIG YELLOW LOGO OF ANDROID and in ODIN i got the Yellow icon appeared.
At this moment I've pressed START in odin and waited. The phone was acting like when updating through Kies.
When finished I was on ECLAIR
After, I've Re-Rooted the phone with superoneclic again.
Installed Rom Manager
Downloaded the CMW (CLockworkmod) that you can find here:
http://www.multiupload.com/5CUIK88JM0 (DON'T OPEN THIS ZIP BECAUSE IT WILL BREAK THE SIGNATURE NEEDED TO VALIDATE THE FILE)
I've placed the update.zip file (CMW) at the root of the internal SD Card of the phone and rebooted into recovery mode. I went on the apply update.zip (first time it was not working, then second time it worked)
At this moment I was on Android 2.1, Rooted, and CWM Recovery was working.
To Install the Darky's v6.0 Gingerbread Edition, I've downloaded it here:
http://www.multiupload.com/YPQVS4WO9C (ONCE AGAIN DON'T OPEN THE ZIP)
I've placed it at the root of the phone (same place than update.zip)
Opened Rom Manager, and selected Install a Rom from SD Card.
I've selected the zip File and applied it.
Phone went into recovery mode by itself then started installing Darky. (took like 5 minutes but it is said to be between 5-10 minutes so...)
HURRAY I'M ON DARKY CUSTOM ROM!!!!
PS: (at boot screen GT-I9000M will change to GT-I9000), Boot Screen Animation will also change for the Nexus One Boot animation.
Took me a day and half from Noob to This but hope other Bell user (or SGS user) will find their solution here.
Now let me alone I have to play with my new toy lolll
Just got back home. I will follow your footsteps. Do you have 850 mhz band ?
You with Bell ? Any problem making and receiving calls using Darky's rom ?
Followed your steps. Now I'm running Darky's v6.0 rom.
Even if it's a Bell phone, i'm using it on rogers.
I don't have any band problems(yes i have the 850 band). In fact, since i'm on Darky it look like if the wifi and phone antenna is far better. I got reception in places i wasn't before...and can even say GPS lock my position accuratly in less than 10 sec
Everything is.better since darky run on my phone
Sent from my GT-I9000 using XDA App
Hey, can you please clarify the ODIN steps? I have the exact same problem seen here.
I've completed up until where you put the phone in download mode. I set up ODIN as described, then connected my phone via USB, then enetered Download mode - but I only get a yellow icon on the phone, not in ODIN. Have I gone wrong somewhere?
Hey Guys,
I have an International I9000 Galaxy S.
The problem is that I have installed 2.2 Froyo through Kies, then rooted and attempted to install ClockWorkMod with ROM Manager. Whenever I flash and boot recovery, I'm taken to the 3e Recovery Menu, not the CWM Menu.
I can't understand why it refuses to boot :/
Please help a noob
Anyone? .
hi
ive never used rom manager so cant comment on that but why dont you go into dev forum and check out the roms there and on the OPosts theres directions that are easy to follow
most of the kernals have recovry built in
regards
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-galaxys.zip
I'm not entirely sure, as I don't use Rom Manager either, but I believe that only flashes it so you're only able to access it using Rom Manager. Is there any option within Rom Manager that allows you to boot into CWM?
In my opinion your best bet would be to flash a kernel with integrated CWM, or ideally a whole new custom rom. Much easier.
icecold601 said:
Hey Guys,
I have an International I9000 Galaxy S.
The problem is that I have installed 2.2 Froyo through Kies, then rooted and attempted to install ClockWorkMod with ROM Manager. Whenever I flash and boot recovery, I'm taken to the 3e Recovery Menu, not the CWM Menu.
I can't understand why it refuses to boot :/
Please help a noob
Click to expand...
Click to collapse
Reason being is because 3e does not work with CWM. Only 2e is supported. Check the CFRoot thread, and if your rom falls into the firmware listed, you're in luck. Otherwise, like myself on Froyo JK4, I need to downgrade to 2.1 via Odin, then reboot into CWM.
stan28 said:
Reason being is because 3e does not work with CWM. Only 2e is supported. Check the CFRoot thread, and if your rom falls into the firmware listed, you're in luck. Otherwise, like myself on Froyo JK4, I need to downgrade to 2.1 via Odin, then reboot into CWM.
Click to expand...
Click to collapse
You do not need to "downgrade" you just need to install a different kernel.
I recommend this one http://forum.xda-developers.com/showthread.php?t=822756
Make sure you read through the thread all the answers your looking for are in there.
my gf just got a cappy. build 11XX and it has 2.2 stock.
For some reason I cant get into clockwork mod recovery. I rooted using the universal root tool, then installed CMR and flashed it, then i restart and / or try to load custom rom and it seems to not go in to 3r its stays on samsung recovery. what the hell is going on?
I tryed odin 1 clicking to 2.1 but that didnt work... just kept me at 2.2 formattted / cleared.
wat do?
Thanks
2.2 has 3e recovery and wont let you install cwm b/c of invalid signatures. There are a few different threads that tell you how to get around it (sorry I can't provide a link).
Wish I could be more help, but I have only been at this a few weeks. This same situation did happen to me last week though. Good luck
A search for 3e recovery will get you the answer you need. I believe the pertinent thread is in the Vibrant forum.
I picked up a nice used Samsung Galaxy Tab with no sim card for my wife. The boot screen says it's for AT&T but she just uses it on Wifi and no intention of using it on 3G.
I figured I would upgrade it to ICS, and I thought I was on the right track until I tried to flash CWM 6 from the following Wiki link. Now it's in a loop and says "Connected by AT&T", shows a thin line across the screen, and then reboots.
I used this page for what I did:
Wiki: Samsung_Galaxy_Tab_(GSM):_Full_Update_Guide
Can someone help me out so my wife doesn't kill me?
Before I attempted rooting, I attempted to upgrade with Kies but it told me the device was not compatible. It has Froyo 2.2 installed.
Try to restock using overcome method.
Follow the link in my signature.
Sent from my GT-P1000 using xda app-developers app
What did you install after the (kernel with) recovery? The wiki says the following:
After the kernel is installed, the Samsung stock 2.3 ROM will not boot anymore.
This goes for 2.2 too.
Boot into recovery, and install the zip of the ROM that was copied to memory. That ought to work. If not, like priyana said, restock to Overcome, and try the wiki instructions again.
If you're restocking with the Overcome files, you could just stop after the first part, and install only the stock ROM (JQ1 Gingerbread). Or continue after that and install Overcome, that's a good modified Gingerbread.
I have tried getting into recovery mode, but it just continues looping and rebooting.
What are the correct steps to get into recovery mode?
I have tried Power, Volume Up, Home but nothing works.
Basically, when I power it on, it just loops and I can't get to a point to even start the Overcome or see recovery mode in order to copy anything.
ableeker said:
What did you install after the (kernel with) recovery? The wiki says the following:
After the kernel is installed, the Samsung stock 2.3 ROM will not boot anymore.
Click to expand...
Click to collapse
I was unable to install anything else after the CWM6 flash. That's when it started looping.
Thanks!
You guys saved the day. That "Overcome Experience" pdf was nicely done. It took me a little while to get my bearings in it, but I finally found the section about re-stocking to Gingerbread.
I was able to successfully install the GB version and then I installed the CM9 on the Wiki page I mentioned earlier.
I really appreciate the help and direction you provided. My wife will be happy and I can live another day.
Phone Info
root : yes
Recovery: CWM
Model Number: GT-I9505G
Hi guys, I have the Samsung Galaxy S4 Rogers Canadian version that came with TouchWiz out of the box. When I heard that 4.3 Jellybean was out, I immediately tried looking for a guide to flash my S4. In the end, I flashed it, everything seems to be working, but I am not sure If i flashed it the right away. This isn't my main problem, just summarizing what i have done to my phone incase it might help.
So my problem is, I can't flash my phone with CyanogenMod 10.2. I went into recovery mode with CWM and I erased Data, cache and delvik cache. Install from external SD zip --> clicked the CM 10.2 Nightly file and it installs. Rebooted phone and it wouldn't boot up, samsung logo would show up but it would just turn off right after. After that i went into recovery mode and deleted the delvik cache and rebooted and to no avail, same thing happened.
So in my head, i was thinking that maybe its not working because i flashed the stock 4.3 wrong. So i downloaded a stock 4.2.2 Rogers Canadian Rom and tried doing the same procedure to install that, but this time i got an error saying (might not be the exact error, just thinking from the top of my head) " E: can't open /external_sd (bad)" I had researched this error and people were telling me it was from a corrupted file, so I downloaded another one. This time it didn't say anything, just said "Aborted (sorry somewhere along those lines i completely forgot)"
Please, please help me. I am so frustrated and confused.
flipboi15 said:
Phone Info
root : yes
Recovery: CWM
Model Number: GT-I9505G.
Click to expand...
Click to collapse
Unfortunately this forum is for the S4 Active, model numbers i537 and i9295. Try again in the S4 forums and you'll be more likely to find someone that knows your device!
Thanks for the heads up didn't realize I posted in the wrong section. If a mod could please move my thread that would be appreciated, thanks