Noob question... What version of Tab (Telstra) do I actually have? - Galaxy Tab Q&A, Help & Troubleshooting

Hi. My Tab is a GT-P1000T (note the T at the end). It was bought in Australia from Telstra. On the back, it has Telstra logo. Also start up logo is Telstra. It is branded but SIM/carrier unlocked.
Is this device actually same hardware as stock GT-P1000 and the T only identities it as Telstra branded? Or is it a different beast?
I ask this because I want to know if I can safely flash the stock gingerbread rom to it without it bursting into flames ;-)
Any thoughts on this? Anyone with the same Telstra branded model successfully flashed to gingerbread & ALL functions still working?
Thanks.
Sent from my Galaxy Tab GT-P1000T (Telstra) F/W 2.2 using XDA App

I have the same tab and have had no problem flashing overcome roms, good luck!
Its a p1000, the T is just for telstra i guess

natious said:
I have the same tab and have had no problem flashing overcome roms, good luck!
Its a p1000, the T is just for telstra i guess
Click to expand...
Click to collapse
Thanks! I'll give it a shot.
Sent from my Galaxy Tab GT-P1000T (Telstra) F/W 2.2 using XDA App

Related

[Q] help me with fixing this~ unsual

T-mobile galaxy tab.
band: P1000XXJMA
kernel: 2.6.32.9 [email protected] #1
build: FROYO.XWJMI.Roto-JMI-v2
my current provider is Mobilicity which uses AWS network(HSDPA 1700/2100). Tab must work well on this provider since T-mobile galaxy vibrant is working so nicely with Mobilicity.
but the problem is even if i put the SIM card in the tab, the tab won't find any network. I rooted and unlocked properly.
help me~ what is wrong??
plz
please help me guys
Have some patience, that was just an hour... Anyway, did you flash a modem? Because otherwise it's not really going to work.
Sent from my GT-P1000 using Tapatalk
AlexTheStampede said:
Have some patience, that was just an hour... Anyway, did you flash a modem? Because otherwise it's not really going to work.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
which modem should i flash to? is there any good rom that works with my provider??
No clue. Since you say TMobile tab works well, i'd suggest that one. However i'm not an expert by any mean, so you might want to look around/wait for more answers.
Sent from my GT-P1000 using Tapatalk
The T-Mobile US modem is the only modem known to support 1700/2100 AWS, so if you want 3G it's your only choice!
Regards,
Dave
Look for the standard TMO 3G modem in Roto's modem switcher thread in the dev section.
Sent from my SGH-I987 using XDA Premium App

[Q] Uninstall OverCome Rom.

Hey guys. I am new to android. I just installed the OverCome Rom to my Galaxy Tab Asia Model and I thought of uninstalling it because I think I wanna use the original firmware. Anyone can teach me how to uninstall the overcome rom and flash my Glaaxy Tab to my original firmware? Thank you guys
What is your original firmware? If its froyo, flash rotohammers rom, then your original.
Yup its froyo. Do u have any tutorial cause im not that good with this
Sent from my GT-P1000 using XDA App
Roszaidee said:
Yup its froyo. Do u have any tutorial cause im not that good with this
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
do you want to reflash froyo overcome? Or return your tab back to standard, any case, you should be safe if you do a Odin flash back to a rotohammer froyo, then the froyo rom of choice, just follow the overcome instructions but switch the roms for what I said
swyped from a galaxy far far away...
i wanna make my galaxy tab back to normal, just like a freshly baked cake out from the box. can you tell me what firmware do i need to use? im using asia Galaxy Tab. cause im not the expert, this OverCome rom my uncle helped me to do it now hes away, i cant undo it =(
based on the firmwares found on samfirmware, there are different stock asian firmwares available. there is an Indian version (P1000DD), south east asian version (P1000DX), Hong Kong version (P1000ZH) and Taiwan version (P1000ZT).
i myself keep 2 froyo firmwares to go back to:
P1000DXJK2 - which was the firmware that came with my tab when i bought it sometime in december.
P1000DXKM3 - which was posted sometime in february/march that i got from a thai forum.
Singapore galaxy tab should be south east asian right?
Sent from my GT-P1000 using XDA App
yup. SouthEast Asian Firmware is for you, same as mine.
you could check my other post related to this matter.
Post 62
hope this helps.
So i just follow the exact steps and use the exact same files?
Sent from my GT-P1000 using XDA App
Can you give me the link for the galaxy tab latest south east asian firmware?
Sent from my GT-P1000 using XDA Premium App
Roszaidee said:
So i just follow the exact steps and use the exact same files?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Yup, these are the exact same files and same steps i use when i restored back to froyo.
Roszaidee said:
Can you give me the link for the galaxy tab latest south east asian firmware?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
i believe p1000DXKM3 is the latest stock firmware released/leaked to the public right now. it is still Froyo 2.2 though.
here in the philippines i'm still waiting for an official release of stock Gingerbread 2.3.3 for our region.
I see i see. Thank you very much brahh!
Sent from my GT-P1000 using My Hands To Type
no problem..
broo. i need help ! my galaxy tab keeps showing the samsung boot logo. any help pleasee?
what has happened exactly?
you could try powering down your tab first.
then try entering recovery mode (done by pressing volume up + power button).
wipe your cache and then afterwards restore to factory settings.
unable to change my Galaxy Tab (GSM) rom from Custom overcome to Rotohammer or any st
Hi guys, I read the post and tried Rotohammer but it failed in the start hanging at "Connection setup" then shows fail. Can anybody suggest how to remove this Custom ROM Overcome_v1.6.4 and install any Foroyo stock rom.
Tausif330 said:
Hi guys, I read the post and tried Rotohammer but it failed in the start hanging at "Connection setup" then shows fail. Can anybody suggest how to remove this Custom ROM Overcome_v1.6.4 and install any Foroyo stock rom.
Click to expand...
Click to collapse
Hi I'm a noob myself but I assume you can just follow the overcome guide to go back to stock?... basically, go into download mode And flash "overcome stock froyo safe" using Odin. I may well be missing something but wehenever I mess up and my tab won't boot, I just re-flash...
This is my first attempt at offerring help to anyone here, if i'm wrong please tell me! (Nicely!)
Sent from my GT-P1000 using XDA App

About 3g freqency on new 2.3.3 firmware

Hi, I am a newbie here. I have a T-Mobile USA galaxy tab . I am wondering if I flash 2.3.3 rom, does 3g still work?
Thanks
Sent from my SGH-T849 using XDA App
It would depend on a rom-per-rom basis. I would imagine that many, if not most, would work fine. Read over the entire post of which ever rom you are interested in using, it should state whether or not 3g works. I'm no engineer, but I really don't think the firmware version would matter. It depends on the modem you use.
brownswing said:
Hi, I am a newbie here. I have a T-Mobile USA galaxy tab . I am wondering if I flash 2.3.3 rom, does 3g still work?
Thanks
Sent from my SGH-T849 using XDA App
Click to expand...
Click to collapse
Dude, please try and use some common sense, We have a dedicated Q&A/General forum. This is the development section for posting dev work not the newbie help desk.
3g is alway working with tmobile modem (no voice).
Sent from my GT-P1000 using Tapatalk

[Q] ICS on Galaxy Tab with US Cellular SCH-I800

I have a wifi only Galaxy Tab branded with US Cellular SCH-I800 and am wondering if anyone has tried putting ICS on this version? I am debating on using the method in this thread "[HOLY CRAP][SPRINT P100] Stock to ICS - Complete Walkthrough"
Has anyone done this with a US Cellular tab?
Anyone???
Good talk...
Munoz.ca said:
I have a wifi only Galaxy Tab branded with US Cellular SCH-I800 and am wondering if anyone has tried putting ICS on this version? I am debating on using the method in this thread "[HOLY CRAP][SPRINT P100] Stock to ICS - Complete Walkthrough"
Has anyone done this with a US Cellular tab?
Click to expand...
Click to collapse
Yes, that method will work just fine. I couldn't stand to leave you here talking to yourself any longer.
Sent from my SCH-I800 using XDA

Is P1000R same as P1000?

Hello, my dad has Rogers Galaxy Tab P1000R from Rogers, and he wants me to root his Tab and put a custom ROM on it.
So I searched "How to root P1000R" on Google and only found how to on P1000
So I'm wondering if Galaxy Tab P1000R is same as P1000 and if I can simply root the same way as P1000 and put a P1000 custom ROM on P1000R.
Thanks in advance
yes, the "R" is the same as P1000 but carrier branded
priyana said:
yes, the "R" is the same as P1000 but carrier branded
Click to expand...
Click to collapse
Thank you so much! Also, I'm coming from nexus, so I wanna know if I could root using adb and fastboot commands
Sent from my Galaxy Nexus using xda app-developers app

Categories

Resources