I have been lurking and reading for a couple of weeks now. I bought a used NC with 1.1 and used Autonooter to root it. Works great.
I bought a second NC which had the 1.2 s/w on it. I used the manualnooter process to root it. That works pretty well.
Now I'm thinking about getting into the nightly CM7 game. I'm wondering is there anything I need to watch out for with the 2 NC's I have if I do this. Do I have to take them back to stock? Can I just follow the CM7 instructions?
Any insight and guidance would be appreciated
50 views and no replies. If you read this and can help I would really appreciate some info. I'm reluctant to proceed until I hear from someone who has traveled the road before. Thanks
You can run CM7, stable or nightly, off of an SD card. You don't have to change anything on your Nooks to do this. In fact, they don't even need to be rooted. Running CM7 on the SD card will not change anything on the built-in memory of the Nook.
Look for the "size agnostic" thread, follow the directions, and you're good to go.
ps. I enjoy your music.
yeah, just follow the instructions on flashing cm7 for the first time. and make sure you understand the CWM instructions. you may want to try a stable rom for now. there are lots of battery and kernel issues right now with the nightly builds. but not to fear the devs are working hard to fix them. just stay with the stable's and your be fine. I hope this was helpful...
boxcar8028 said:
yeah, just follow the instructions on flashing cm7 for the first time. and make sure you understand the CWM instructions. you may want to try a stable rom for now. there are lots of battery and kernel issues right now with the nightly builds. but not to fear the devs are working hard to fix them. just stay with the stable's and your be fine. I hope this was helpful...
Click to expand...
Click to collapse
is this the one you mean?
http://forum.xda-developers.com/showpost.php?p=11452450&postcount=19
Well, I went ahead figuring "How hard could it be anyway?".
I did the nand backup with CWM 3.0.2.8
I then ran ROM manager V4.2.0.2 from internal memory.
I choose the option that allows me to download ROMS.
I chose CyanogenMod, and then chose 7.0.3.
I downloaded the ROM
I then chose Install ROM from SD card
It asked me about clearing caches, etc and I chose the default values already checked.
It installed without errors.
I rebooted and it got to the last part of the boot process where the word "color" is rapidly changing and stayed there indefinitely,
I rebooted with CWM on the SD card and tried to reinstall the Manualnooter I loaded on this NC a week ago.
Rebooted. Still hung up.
I copied my nand backup to the CWN SD card and chose restore.
It booted back to my manualnooter install successfully.
So I'm successfully back where I started.
Can someone help me understand what I did wrong on what I need to do to make it work? Thanks
Not sure what went wrong, but I would also suggest trying verygreen's size-agnostic approach. You keep your manual nooter and can run CM7 from an SD card to see if you want to go all the way and remove the stock BN software.
Try this thread:
http://forum.xda-developers.com/showthread.php?t=1000957
Or, if you want to go crazy, you could try racks' dual boot SD card image of Phiremod 6.2 (a variation of CM7) and Honeycomb. That's what I'm using and Phiremod works great (aside from battery life ) and honeycomb is just plain slick to use.
http://forum.xda-developers.com/showthread.php?t=1045018
I loaded CM7 7.0.2 stable and was able to get it going. Thanks
Related
Hi guys,
I recently bought a Nook Color and i want to root it. I am hearing things about Autonooter and putting an image on my micro SD card. Personally i just want the best option to root my Nook, i want to overclock it aswell .
Really sorry if someone has already posted a thread like this, i tried searching for one.
I havent opened my Nook Color yet so guessing the software would be 1.0.0 so how would i root it to 1.1.1 and also stop OTA and install a overclocking software.
Thanks, XDA is amazing, recently rooted my Notion Ink Adam
I too would be interested in such a thing. There is information all over the place, but most seems to be geared toward people that understand the "lingo" and such...
I agree
reading MD5 hash
I'm pretty new to this- I have my NK running 1.0.1 using autonooter and want to update to 1.1. I think I've got a grip on using ClockworkMod, but in the instructions for downloading the 1.1 kernel, it says to "check the MD5 hash"- how do I get this info from the downloaded ZIP file? I don't want to even try and do the update without making sure the download is not corrupt.
Thanks!
rcsrich said:
I'm pretty new to this- I have my NK running 1.0.1 using autonooter and want to update to 1.1. I think I've got a grip on using ClockworkMod, but in the instructions for downloading the 1.1 kernel, it says to "check the MD5 hash"- how do I get this info from the downloaded ZIP file? I don't want to even try and do the update without making sure the download is not corrupt.
Thanks!
Click to expand...
Click to collapse
http://helpdeskgeek.com/how-to/check-md5sum-in-windows-7/
I have to say though, to the OP, that reading through all the guides (and some comments) in the dev forums would be the best because you'll learn all the ins n outs. Having a noob guide is fine but it's fun searching for the info yourself and you'll learn/remember a lot more about your device. having a noob guide that is not comprehensive enough just promotes needless questions when the info is all over the place elsewhere.
Thanks for the link superkevx! Additionally, is there any way to do the check on the Nook itself? I downloaded it using the stock browser & can pull the SD card and check it on my 'puter, but it would be nice to be able to just do it locally.
I agree with you comment about the noob guide- I've learned so much trolling the dev forums...
i do try to find everything its just some things i dont get:
like clockworkmod, i think its to do with disabling OTA but im not sure
which is better,autonooter or installing on SD
,if you could answer these questions i would be really grateful thanks
From one noob to another...
Patrikc8 said:
i do try to find everything its just some things i dont get:
like clockworkmod, i think its to do with disabling OTA but im not sure
which is better,autonooter or installing on SD
,if you could answer these questions i would be really grateful thanks
Click to expand...
Click to collapse
Patrikc8- from my experience (have ROM Manager & Clockworkmod installed in prep for 1.1 update), Clockwork mod is used for making system backups and doing system restores (including installs of custom ROM's)
As far as the SD vs autonooter- installing to the SD means that you typically don't touch the original system files on the Nook itself- good for trying out a ROM that you are interested in but not sure you want to keep. There may be a performance hit though because you're constantly reading from the potentially slower SD media (correct me if I'm wrong on that anybody). I used autonooter to root my Nook and it has worked great since- it is apparently a very easy way to root and I had no trouble doing it.
Aha!
rcsrich said:
Thanks for the link superkevx! Additionally, is there any way to do the check on the Nook itself? I downloaded it using the stock browser & can pull the SD card and check it on my 'puter, but it would be nice to be able to just do it locally.
I agree with you comment about the noob guide- I've learned so much trolling the dev forums...
Click to expand...
Click to collapse
For what it's worth- did a little investigating & you can use Astro file manager to get the MD5sum- just do a long touch to the file in question and choose "Details".
SHould i use auto nooter 1.0.1 or the nook color v1.1.1 ROM?
and im guessing you have to root it first then install a rom then install a kernal?
would there be a big difference in 1.1.1 and 1.0.1 ?
I bought my Nook Color a couple of weeks ago. It was on 1.0.0. The first thing I did was update to 1.0.1. I then downloaded the Autonooter for 1.0.1 on my pc. I also installed Win32DiskImage.exe on my pc, and followed the directions to burn the image to my sd card. I followed the instructions exactly as they are laid out on nookdevs. I then reformatted my sd card back to normal to use for storage in my device.
One thing that happens when you run autonooter is that clockwork recovery is installed. This is simply a tool that will allow you to perform functions at a lower level than the android interface will allow. It my look a little intimidating at first, but go slow, and make sure you are absolutely sure that anything you do in CWR matches what it is listed in the instructions posted. Every action requires a confirmation, so, again, go slow and think it through.
A few days later, the 1.1.1 update came out. I used the updated Rom and instructions here:
http://forum.xda-developers.com/showthread.php?t=932145
Something that I found confusing is using alternate home screens. I finally determined that Zeam was the right choice for me. It is free in the market. The other tool you should download from the market is called Home Switcher. It will let you switch between different launchers (e.g. Zeam, BN stock home, etc.). Again, you will probably have to experiment a bit to get things working the way you like.
Lastly, to improve the performance overall, I flashed a few different kernels. You may want to play with your nook for a while to get comfortable first. When you choose to flash a kernel, you will boot into recovery (this brings up the Clockwork Recovery program), and pick the zip file that you download to your sd card. My recommendation is to start with the 900mHz kernel first. Make sure your nc is stable, then try some of the faster ones.
As far as MD5s, I have not ever checked after downloading, and have not had any problems as a result. It is something I need to investigate further and start doing.
Hope this helps. I do agree with superkevx above. Browse and search and experiment. It is very unlikely that you will do any permanent damage to your nook, although it is possible. Everyone needs to have at least one bricked device along the way. I have learned more by rendering my devices inoperable and then figuring out how to get them back again. You know you're doing it right if your palms are a little sweaty as you wait for your device to reboot.
you guys have been great , thank you
I am a noob to rooting a nook color and was wondering which image would be recommended at this time? It is my wife's nook color and she is got 1.1.0 update on it and we are running windows xp on the desktop right now so any input would be greatly appreciated. Oh and she has a 32gb microsdcard in the nook that is blank.
If by image, you mean Andrioid version, I'd stick with rooted stock Eclair, if I were you. It's all well and good to expermient, but it can be rather time-consuming.
Personally, I'd say to use AutoNooter and follow the instructions on NookDevs. Make sure to use the right version (1.1.0 in your case) and good luck!
Thanks for the input
FYI, it was completely non-obvious to me until I asked here, but apparently you can root (or not root) the stock OS and alternately boot off an SD card at your whim.
Is it recommended to update to 1.1 before rooting? or It doesn't matter? Any advantages?
I am really liking the Monster Root Pack from thecubed:
http://forum.xda-developers.com/showthread.php?t=922870
Rooted one of the NCs I have from 1.1.0 and have found it extremely stable and all facets working beautifully! Have some minor issues with Dolphin ND but prefer Opera anyway. Burnt the image to a 2GB Class 2 mSDHC only installing the root and GApps. Installed CWM later. thecubed did some sweet work on this. Almost foolproof IMO.
Give it a whirl.
I'll tell you I read through these forums for 4 days before I finally rooted my nook. Used Auto nooter and then realized that I bought this thing for full use as an Android tab and the next day I looked into CyanogenMod 7. After 2 days of trying to do the dual boot (sd card boot), I gave up and finally just flashed CM7 to the internal
Yesterday a friend of mine brought his nook to me. Saw how much I could do that he could not, and had me root and flash CM7. It is so easy if you follow the instructions on the CM nook wiki page! Including time to format the SD card (which takes the longest) and install, it was less than a half hour before he was up and running as a full tablet. THe instructions, although they seem brief, are great there. Follow it to a key and remember to ask questions if needed.
So I have tried this a number of times. When I try to install Nookie Froyo to the EMMC using CWM 3.0.0.5, I keep getting Installation Aborted. I had flashed it back to stock 1.0.1 to start over but no dice. Then it hit me. Dummy, I didn't re-root.
So, flashed - yet again - back to stock 1.0.1. Used B&N's ROM to update to 1.1.0. Used Auto-Nooter 3.0.0 to root it. Then created a bootable CWM with the Nookie Froyo zip file on it. I really thought I was going to have it this time but once again, Installation Aborted.
So far, the only ROM I have been able to install with CWM is the original stock 1.0.1. Piece of cake there. I have been using the same Nookie Froyo from my other SD card I have, absolutely love it which is why I want to get it on my EMMC so I can free up the card.
Any ideas? I am scratching my head. Been at it for 2 nights.
If you're trying to flash a ROM that is intended to be bootable from SD to eMMC THAT'S your issue. You need to use an eMMC ROM zip file. From what you're saying it sounds like you're not.
Sent from my nook color using Tapatalk
I wish it was that easy. I've been careful in following directions so I definitely have the file that is meant to be flashed to the EMMC - nookie-froyo-0.6.8.custom.3.zip. As opposed to this file - nookie-froyo-0.6.8.SDCARD.2GB.custom.3.zip - which I unzipped and used the resulting image file to create a bootable SD.
I appreciate the response though.
I am new to this stuff and I have read and re-read the volumes of posts and instructions. I am floored by the talent of the Developers and am infinitely grateful for all the efforts! Tried multiple searches to see if someone was having the same problems and have come across those that would get the Installation Aborted message within CWM but they were able to figure it out. Unfortunately, none of their solutions helped. Argh.
I know there were issues with CWM versions before 3.0.1 and B&N software version 1.1. I was on B&N 1.1, rooted, installed CWM 3.0.0.5, but I couldn't make a backup. So I searched around and found some info saying that those two software versions didn't get along. After I upgraded CWM to 3.0.1, everything works as it should, maybe that's your issue as well. I hadn't tried flashing anything through CWM 3.0.0.5 before upgrading it though, but it's worth a shot.
Now THAT sounds promising! I did try 3.0.1.0 but not since I flashed it back to stock, installed 1.1.0 and re-rooted. Thanks much for this bit of info. I will try this tonight.
I don't feel so dumb now.
Just to experience success, you could just try to flash from this image:
http://forum.xda-developers.com/showthread.php?t=938200
Burn the image to SD card, insert into NookColor, follow instructions to flash.
Worked perfect for me and I had a completely stock NookColor 1.1.
Best regards,
-boggsie
Oh, boy. Back to feeling dumb. For some reason I made the assumption I had to flash CWM then copy the zip file to the the SD card. If I followed Brian's instructions to begin with, I would have saved myself a ton of time. Ah, well.
So I got Nookie Froyo flashed to my EMMC but there are some differences to the SD card version. So after all that, I am back to my SD card installation. i know Brian is working on another EMMC version that sounds like the SD card install. At least now I know what I am doing.
I do appreciate the help, all.
FWIW, I tried, albeit very briefly, the same nookie froyo that you're using, and I found that I like CM7 a lot more. Now that you got your issues ironed out, you might want to give it a shot and see how you like it. There's a good write-up about installing and maintaining a CM7 rom over on androidtablets.net.
I have a question, I was wondering if this is possible. OK, I have been on CM7 for a while now and now I'm looking into going back to stock now there is a way to run CM7 from an SD card, I would like to go that route from now on if possible. OK, little back ground first. I was on GMPower's Auto-Nooter 3.0 running 1.1 software version with CWR 3.0.0.5. When I made the choose to move to CM7, I made a full nanodroid backup first before I made any changes, I also did a test and did a restore to make sure it worked fine. Then I installed CM 7 with 3.0.1.0 and have been running fine (of course with the known issues that CM7 has). Now with the question, If I boot with my Monster RootPack Clockwork Recovery 3.0.0.5 SD since it's CMR 3.0.05, can I restore my nanodroid backup and it restore fine since it should restore all my emmc partitions? I know I would first wipe the cache and then format the /system and /data partitions then do the restore. With all that being said, or would I have to completely return my Nook back to stock and redo everything? If this has been answer please don't shot me and sorry for the bad grammar (I'm no English manger)...LOL
Thanks,
DG
It's possible - I just did the exact same thing myself. So, it can be accomplished. that being said - it took me a while to get it back. I consider myself fairly well versed in most things android (have a 1st gen droid phone for a while now - been through many custom roms), and on my Nook went from stock to rooted stock to cm7. I got to a point where I just wanted to start over fresh, so looked into getting back to a rooted stock version. From what I have found, a lot of what you will go through depends on how deeply you've delved into cm7 (mainly do you have clockwordmod installed on the internal memory, etc. My situation was running cm7 from internal, but was still using clockwork from an SD.
Long story short - my method went something like this (after many trials and errors):
- used the SD I installed CM7 with since it would boot into clockwork.
- formatted system and data
- applied stock 101 zip I had copied to the SD
- had some issues booting correctly (not sure if you will) but ended up holding power and 'n' for about 10 seconds to get to the factory restore and after that completed, my nook booted as it should into a fresh install
-re-rooted using autonooter.
I had attempted the "interrupt power 8x" trick but got nowhere with it since it was a huge pain in the butt to time it correctly. There are lots of great guides around, you just have to find the correct one for your particular situation and may have to use one to get to point A, then another to get to point B.
Hope my ramblings help - bottom line is yes, it's possible
Hey all, I'm running CM7 7.1 rc-1... I just installed dalingrin's latest oc kernel... And it killed my wifi.. It's really bugging me. My nc is currently oc'd @ 1200.. With a min speed of 600. Is the kernel killing my wifi? Or is it the overclocking?
Thanks in advance.
Hi,
interesting. I had the same experience. My case went a little bit further than that as I lost my whole config after trying to fix it ... long story short, after fixing my nook and re-installing back to stock (1.0.1 then upgrade to 1.3). I tried again, installed same distro on SD but I put all the zip files at the same time on the sd card for install (7.1, gapps and OC); everything got installed and no more wifi problems. I also upgraded to full nightly 212. So far, so good.
I also noticed something: after testing a few apps, I would get a weird behavior. In rom manager, fix permissions would fix most of the issues.
Olivier! said:
Hi,
interesting. I had the same experience. My case went a little bit further than that as I lost my whole config after trying to fix it ... long story short, after fixing my nook and re-installing back to stock (1.0.1 then upgrade to 1.3). I tried again, installed same distro on SD but I put all the zip files at the same time on the sd card for install (7.1, gapps and OC); everything got installed and no more wifi problems. I also upgraded to full nightly 212. So far, so good.
I also noticed something: after testing a few apps, I would get a weird behavior. In rom manager, fix permissions would fix most of the issues.
Click to expand...
Click to collapse
hmm.. interesting. I'll give that a try and tell you what happens.
update:
I tried to install the stock firmware by deleting cwm, repartitioning boot to stock (after installing stock 1.1)... now it just loops on the "nook color by bn" screen. any suggestions?
Follow the instructions here and start all over. Choose nightly 200 or higher and make sure you use the latest version of CWR (3.2.0.1): http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
patruns said:
Follow the instructions here and start all over. Choose nightly 200 or higher and make sure you use the latest version of CWR (3.2.0.1): http://mrm3.net/nook-color-how-to-install-cyanogenmod-nightlies/
Click to expand...
Click to collapse
brilliant! that worked wonderfully. for future reference, the latest version of CWR seemed to do the trick. thanks!