[Q] I think i just bricked my new LG Optimus Black [RESOLVED] - LG Optimus Black

Hi all. I'm new to Android and in my ignorance i messed up my new phone.
I have a week old LG Optimus Black and i rooted it using GingerBreak and i was messing with Titanium Backup to uninstall some of the LG pre-installed bloatware.
I'm pretty sure i uninstalled something calle LGHome which after exiting TiBackup made the screen white. So if i am correct, i uninstalled the launcher and the whole menu system?
Now when i try to turn on the phone, it's stuck in LG logo and won't turn on. I am able to get it to S/W update screen by pressing volume+ and plug into USB. The LG Update software recognizes it but it says the phone is up to date so it doesn't do anything.
Could someone advise me on what to try next?
Regards.

Still looking for help.
Where could i find the original ROM for the P970?

Update:
Thanks to a fine gentleman over at android . modaco . com (apparently i can't post links) i have recovered my phone LG Optimus Black P970 to a fully working state.
Here is his post for those having similiar problems (can't post links yet, but will update when i can)
Basically, the LG Mobile update software has a built in recovery and if you put in the IMEI or serial number, it will download the original ROM and recover the phone. I just pressed down volume+ and plugged in USB and the phone goes into S/W update mode. In my case i had unintentionally uninstalled the launcher/homescreen, so when the recovery was complete, the homescreen was back to stock, but all my programs were still intact. It did not wipe the internal SD.

pihx said:
Update:
Thanks to a fine gentleman over at android . modaco . com (apparently i can't post links) i have recovered my phone LG Optimus Black P970 to a fully working state.
Here is his post for those having similiar problems (can't post links yet, but will update when i can)
Basically, the LG Mobile update software has a built in recovery and if you put in the IMEI or serial number, it will download the original ROM and recover the phone. I just pressed down volume+ and plugged in USB and the phone goes into S/W update mode. In my case i had unintentionally uninstalled the launcher/homescreen, so when the recovery was complete, the homescreen was back to stock, but all my programs were still intact. It did not wipe the internal SD.
Click to expand...
Click to collapse
Here's the link for yah
http://android.modaco.com/content-page/339219/lg-p970-optimus-black-clockworkmod/page/40/#
Scroll down to post number 54

rey031 said:
Here's the link for yah
http://android.modaco.com/content-page/339219/lg-p970-optimus-black-clockworkmod/page/40/#
Scroll down to post number 54
Click to expand...
Click to collapse
Similarly posted here in XDA:
http://forum.xda-developers.com/showpost.php?p=15039107&postcount=16

i tried to install kernel nova v11c and when i rebooted my optimus black it stucked on the LG's screen with the touch buttons flashing for ever, (and im cursed, im a mac os x user D
Sorry for my bad english, it's not my native language

lawnder said:
i tried to install kernel nova v11c and when i rebooted my optimus black it stucked on the LG's screen with the touch buttons flashing for ever, (and im cursed, im a mac os x user D
Sorry for my bad english, it's not my native language
Click to expand...
Click to collapse
Which Rom did you have installed previously? I hope it was CM7, if not, READ THE discription
you can either use adb, to reboot to recovery (search adb for your mac)
via moving to the adb folder in a console/terminal
and then typing adb reboot recovery, if you had a custom ROM installed.
If not, make a virtual machine in your mac (google it) install windows and then recover it via B2C.

yes, i was using cyanogenmod 7, i used your method, but doesn't work for me, now it stuck on the welcome screen of the carrier (telcel)
im using windows right now

Already looked into this: http://forum.xda-developers.com/showthread.php?t=1487105 ?
If not, do it and follow the links provided there!

thanks N00BY0815, you and the guy who made the post of the solution saved my optimus black. I'm so happy xD my phone it's alive. And sorry for the bad search of the problem, i saw this post and read "solved" and i hoped there was a solution for my problem.
by the way, when you talk with a noob, speak noob language xD (i dont know what B2C is)

oops... you shouldn't uninstall the lg home~~~ such an importent app..

reboot is freezing the phone and then restoring old data and settings... HELP !!
Hi All.
I need little help with my Android phone (LG P970). The story is the phone is working as much as I can call and text but the system is not stable. It's freezing a lot and then it's trying to reboot but after every rebooting my phone freeze on LG logo... the only way to run it again is taking out the battery and then system is starting ok but it's loading with all settings and data from few days ago... I have try to flash it with Smartflash tool... whole process whas without any error then phone rebooted automaticly and I find out that after rebooting my p970 sterted with the same old and notstable rom with all the call list and messeges from few days ago.. then I tryed to do the emergency recovery of my phone with LG software. Application asked me to type the model and S/N of my phone so I did that and again the whole process of recovery was ok (with no errors)... Then the phone rebooted on the end which is normal and again started with no effect of recovery.. it was the same ZEUS 7 rom, not stable and with all the data and settings from few days ago... I decided to use Titanium Backup to uninstall all the apps and I was trying to instal ROM MANAGER and run the recovery mode but in the middle of my work the phone freez again and then rebooted and then again freeze on LG logo... I took out the battery and again turned it on and when the system was loaded I find out that all the programs which I have deleted with TITANIUM BACKUP was restored somehow... EVERY time I try to restart in normal mode, reboot in recovery mode or even after flashing system is restarting automaticaly, it freeze on LG logo and the only way to run it again is to take out this battery... then system restoring all data and settings for some reason... can you help me with that?? maybe some of you know whot software i should use to do the FULL WIPE and get rid of the old borken system?? and by the way I'm realy sorry but my language is not perfect Thanks in advance for help

Related

[Q] Cannot install ClockworkMod Recovery, stuck reboot loop. Please Help

Hello
I recently got a LG Optimus 2x phone from Wind Mobile in Canada. I was successful in rooting the phone using Super One click and was able to install and run Titanium Backup, Busybox and a few other apps requiring root Access.
Following the numerous guides on the internet, I tried to install the ClockWorkMod Rom Manager (from the market), but when i click on the "Flash ClockworkMod Recovery" and select my phone it will download across the top and give the error "an error occurred while attempting to run privileged commands". When i try to run anything else after I get a force stop error and eventually my phone will just restart on it's own and go into a Loop.
At this point i have to hold down the power and volume down key to boot into the recovery, but most if not all my apps are gone at this point.
I have tried to run the the "Fix Permissions" command from clockworksMOD but that does not work and the same errors happen.
A few extra notes:
I did it with and without an SD card installed
USB Debug mode and install from Unknown Sources are enabled
I do not turn on USB storage
I have tried unrooting and re-rooting and doing everything over but issue still persists
Problem summarized
-With USB debug and install from unknown sources enabled, rooted phone via Super One Click
-After reboot installed and tested several apps that require Root; Titanium Backup, SU, Reboot and system Utilities
-Installed ClockworkMod (Free) from the Market
-When trying to run "Flash ClockworkMod Recovery" and select my phone it will download across the top and give the error "an error occurred while attempting to run privileged commands".
-Shortly after my phone will get stuck in a reboot loop, which i have to boot in recovery mode to get back in
-"Fix Permissions" does not help and goes back into reboot loop when done
What i want to do in the end is install Nandroid to backup my current Rom, then install some custom roms to see which best suits my taste. Any ideas how i can fix this issue i am having or any places that show how to fix it, i have checked for hours on end but can't find anything.
Thanks for the help in advance.
Did you make sure to clear the various chaches before flashing the new ROM?
Okay i found the problem.
Wind Mobile sells it as a LG Optimus 2X but it's a p999 meaning it's the T-Mobile LG Optimus G2x
Once i selected the G2X from the Clockwork Mod it worked. while the Optimus 2x was giving me the problems
This is big news as the phone was just released yesterday i can expect a lot of people in the next few days asking about Wind Mobile LG phones
Works with Mobilicity unlocked Version of same phone.
Thanks for the heads up Since both phones operate on AWS I'm sure there will be same issue with Mobilicity.
i have had the same problem
thanks for your guide.
Man... thank you! I thought I bricked my phone...
Dang, I should've read this first. Damn Wind for using Optimus 2X name
So I'm stuck on LG logo after installing ClockworkMod and selecting Optimus 2x. Did the hard reset with volume down key, but just stuck in "S/W Upgrade. Please wait while upgrading..." screen. Is it normal to be this long?
Can't access phone/recovery menu at all. I'm lost now. Should I attempt to restore the original wind ROM somehow?
Edit: Managed to run ClockworkMod Recovery by following this: http://forum.xda-developers.com/showthread.php?t=1056847
Will try again now using G2X :|
you should reflash the phone. it will stuck there forever if you did nothing with it. it's meant to be flashed with rom.
I had the same problem, just hold down the volume (down), power and home key. It'll factory reset ur phone..
Hey guys,
I bought a brand new Optimus 2X from Wind and I unlocked it to use with Mobilicity in Canada.
It was working great for the first day, but then when the battery died and I charged it, it just keep rebooting.
It turns on, but it won't load anything past the Wind mobile start up. It just keeps relooping.
Any suggestions?
try flashing or updating to the T-Mobile G2X rom with gingerbread 2.3.3 by following this:
http://forum.xda-developers.com/showthread.php?t=1183168

[Q] Almost CyanogenMod for LG P970 - stuck on initialisation screen

Tried to do install (this - tried to link but new members cannot post links; it's SelfKANG7 for the Optimus Black) to my phone tonight, and got all the way to the last couple of steps (flashing ROM and rebooting) without any problems. After installing from zip and rebooting my phone won't move past the CyanogenMod initialisation screeen (blue droid on a skateboard, with a rotating arrow) - hitting the buttons doesn't help, and the only thing I can do to make it stop is to remove the battery.
Has anyone else encountered this problem, or does anyone know how I can restore my phone (made a Nandroid back-up before doing this)? Thanks in advance (and I hope this hasn't been asked already)!
you just pop the battery out when it stuck?
as far as i know,bootloop means stuck on LG screen not Boot screen
you just have to wait a little longer when do a fresh flash
and if it is a bootloop, try the unbrick method that already posted here
agent205 said:
and if it is a bootloop, try the unbrick method that already posted here
Click to expand...
Click to collapse
D'oh - don't know why I didn't even think of that! Thank you, will give it a try tomorrow morning and see how it goes. Fingers crossed.
Good luck and get well soon
twinklebottom said:
Tried to do install (this - tried to link but new members cannot post links; it's SelfKANG7 for the Optimus Black) to my phone tonight, and got all the way to the last couple of steps (flashing ROM and rebooting) without any problems. After installing from zip and rebooting my phone won't move past the CyanogenMod initialisation screeen (blue droid on a skateboard, with a rotating arrow) - hitting the buttons doesn't help, and the only thing I can do to make it stop is to remove the battery.
Has anyone else encountered this problem, or does anyone know how I can restore my phone (made a Nandroid back-up before doing this)? Thanks in advance (and I hope this hasn't been asked already)!
Click to expand...
Click to collapse
To save time, you can use "adb reboot recovery" and either flash SK7 again (wipe everything) or restore your backup. ADB works while in bootloop.

[Q] LG P990 stuck at lg logo

Hey all,
I have a problem with my lg p990. At this time, I am trying to figure it out whether is a software or hardware problem. I have searched each and every forum to over come this problem but went in vain.
problem:
1) lg p990 shows lg logo and goes blank.
2) when vol down and power is pressed the phone goes to s/w upgrade screen.
steps I tried:
1) I have used smart flash to flash my phone to stock ROM.
a) downloaded the stock ROM and flashed with smart flash. The smart flash says process complete successfully and the phone restarts and shows lg logo and goes blank.
b) I tried to flash different stock ROM with the smart flash but same result.
2) I tried using the lg update tool (offline procedure since lg blocked it).
The lg update tool successfully completes the update procedure and tells
the phone will restart. The phone goes to restart and the phone shows lg logo and goes blank again.
3) Last but not least, I tried to download the custom ROM.
a) I downloaded the ClockWorkMod recovery by using nvflash
b) after successfully download recovery image, wipe cache/factory reset/wipe cache partition/wipe dalvik cache.
c) copied ROM in the root of the internal sdcard (connect the phone-->mount it-->copied the ROM and Kernel--> installed the package--> says installation complete-->reboot phone--> the phone does not get pass through lg logo and stays blank. I have waited for 30 minutes but no luck.
I don't know what else to do. After I tried all the steps, the phone just powers on and shows the lg logo and goes blank but the menu,home,search button still lights up. I also resetted the phone but still same problem persists....
Any help would be greatly appreciated otherwise I have a paper weight worth $350.00
I had the same problem as you face here.
I tried everything NV-flash, smartflash, you name it, no luck. Then I did a emergency repair in the LG updater.
Start the Updater, select "emergency repair", make sure drivers are installed.
Battery out, press Volume Down and connect.
Enter IMEI and S/N and repair program starts.
I had to do it twice, before it finished. I maybe had a bad USB connection or cable, but after "S/W update" showed up in screen on second attempt, I reinserted battery and it went very smooth.
Let it boot.
And then root with NV-flash and you are back in business with normal GB partition table.
I can recommend Tonyp's CWM 6.0.1.5 touch for NV-flash, when you have finished rooting.
It took me 45 minutes, with a not too good internet connection.
PS.: I did not try this one: http://forum.xda-developers.com/show....php?t=1715272
but since I could not call up NV-flash, I did not want to spend even more time trying.
mike the mighty viking said:
I had the same problem as you face here.
I tried everything NV-flash, smartflash, you name it, no luck. Then I did a emergency repair in the LG updater.
Start the Updater, select "emergency repair", make sure drivers are installed.
Battery out, press Volume Down and connect.
Enter IMEI and S/N and repair program starts.
I had to do it twice, before it finished. I maybe had a bad USB connection or cable, but after "S/W update" showed up in screen on second attempt, I reinserted battery and it went very smooth.
Let it boot.
And then root with NV-flash and you are back in business with normal GB partition table.
I can recommend Tonyp's CWM 6.0.1.5 touch for NV-flash, when you have finished rooting.
It took me 45 minutes, with a not too good internet connection.
PS.: I did not try this one: http://forum.xda-developers.com/show....php?t=1715272
but since I could not call up NV-flash, I did not want to spend even more time trying.
Click to expand...
Click to collapse
Hey,
Thanks for trying to help but still same problem. Everything goes successfully but still lg logo comes and the screen stays dark.Any other suggestion please I am open..
todaysmobile said:
Hey,
Thanks for trying to help but still same problem. Everything goes successfully but still lg logo comes and the screen stays dark.Any other suggestion please I am open..
Click to expand...
Click to collapse
Exact same issue here...
You found a solution yet ?
My lg stuck on logo.I use this http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
and i use this for clean stock http://forum.xda-developers.com/showthread.php?t=1264289.

[Q] LG L90 D315 bricked without recovery access etc

So this is my first xda thread. I spent hours searching without finding a solution for my particular case.
I am using a LG L90 D415 (T-Mobile version) and I got bored of it and so I started playing with the system (not the first phone I'm doing that with, so I know a bit about that sutff). So I tried to install the new Android L home launcher from here http://forum.xda-developers.com/showthread.php?t=2796019
I did everything like explained, installed it and changed the build.prop like described. But after I rebooted my phone, expecting a new home launcher, the phone boots, I am at the lockscreen, but after like 4 seconds I receive multiple errors (like gapps stopped working) and than everything freezes and it reboots.
Unfortunaly I didn't install a recovery or unlocked fastboot. So I can access download mode, but that's it. My computer doesn't see my phone (because usb debugging deactivated?) and so I don't know what to do. I think that's a pretty tough case but I hope some smart person can help me
Thank you
mcfiish said:
So this is my first xda thread. I spent hours searching without finding a solution for my particular case.
I am using a LG L90 D415 (T-Mobile version) and I got bored of it and so I started playing with the system (not the first phone I'm doing that with, so I know a bit about that sutff). So I tried to install the new Android L home launcher from here http://forum.xda-developers.com/showthread.php?t=2796019
I did everything like explained, installed it and changed the build.prop like described. But after I rebooted my phone, expecting a new home launcher, the phone boots, I am at the lockscreen, but after like 4 seconds I receive multiple errors (like gapps stopped working) and than everything freezes and it reboots.
Unfortunaly I didn't install a recovery or unlocked fastboot. So I can access download mode, but that's it. My computer doesn't see my phone (because usb debugging deactivated?) and so I don't know what to do. I think that's a pretty tough case but I hope some smart person can help me
Thank you
Click to expand...
Click to collapse
No custom recovery and no fastboot? Factory reset is your only option. See this post. Scroll down to Q14. Even though it's titled something else, the same button presses apply for your device in it's current state, ie; no recovery, no fastboot
shinobisoft said:
No custom recovery and no fastboot? Factory reset is your only option. See this post. Scroll down to Q14. Even though it's titled something else, the same button presses apply for your device in it's current state, ie; no recovery, no fastboot
Click to expand...
Click to collapse
First thanks for the fast answer. So I figuered that I only need to delete the build.prop file and replace it with my backup file. Isn't there any way to rescue my files and/or access the /system folder? I'm an exchange student now and I don't wanna lose my picture memories
And btw I know that I build the perfect worst case scenario right now
Oh and in the L90 faq it says that when you flashed a recovery and you navigate to factory reset it won't reset but boot into recovery. Does something like this work even without recovery, so I could try doing stuff with adb?
mcfiish said:
First thanks for the fast answer. So I figuered that I only need to delete the build.prop file and replace it with my backup file. Isn't there any way to rescue my files and/or access the /system folder? I'm an exchange student now and I don't wanna lose my picture memories
And btw I know that I build the perfect worst case scenario right now
Click to expand...
Click to collapse
If adb isn't detecting the phone, no. There isn't any other way.
mcfiish said:
Oh and in the L90 faq it says that when you flashed a recovery and you navigate to factory reset it won't reset but boot into recovery. Does something like this work even without recovery, so I could try doing stuff with adb?
Click to expand...
Click to collapse
Unfortunately, no.
Factory reset will not erase your sdcard. It will however erase internal data. It will return the phone to the state it was in the first time it was powered on.

[Q] Stuck on Welcome Screen... lenovo k3 note

(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Try this to get CWM back on.
rollcage0 said:
(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Click to expand...
Click to collapse
Try removing the battery and plugging the phone in to the PC.
Start SP Tools with CWM set in the scatter and only recovery ticked
Press Download in SP tools and then insert the battery
CWM should download to phone
If that fails repeat but plug the phone in once you press Download, then insert the battery.
rollcage0 said:
(its my dad phone)
hi so yestarday i installed the "aosp-k3note-5.1.0" rom and it all went fine but worked slow and without bluetooth.
so today when i got home my dad told me he just installed a new rom from romnation(he dosent remember which rom but he said it was an offical rom)
BUT he downloaded it stright to the phone and installed it without erasing anything(date/cache/davlik)...
so when he tried to use the phone it will gives errors like gaps stoped working and all kind of stuff that made the phone useless...
so i downloaded "VIBEUI_V2.8_1526_7.80.1_DEV_K50-T5" rom and gapps64 and went to the CMW and this time i erased the date cach and davlik and installed the rom and after that the gapps
and now i cant get past the welcome screnn becuase as soon as i choose english or chinse it will give me "wlan has stopped" and return to the language menu...
so now im stuck becuase i cant use adb to root it and SP tools dosent work too(i tried to keep it pluged for an hour and it still wont do anything with ot without the battery)
what can i do? and thanks for any help...
Click to expand...
Click to collapse
Omg..i have almost exactly the same problem and the solution that MrAAnderson suggested didn't work.Here's how i ended in this problem.I was running VIBEUI_V3.0_1602_7.407.1_DEV_K50-T5 ROM on TWRP recovery made By Pr1nc3V app Lenovo K3 Note Manager [v2.1].Since i had annoying bug with "R" (roaming icon) and "gapps stopped working" issue i wanted to re-flash same ROM.I entered into TWRP recowery,cleared dalvik+cache,rebooted into recovery again.Now i wanted to flash ROM,but it didn't flash it gave me an error,same thing happens if i try to flash stock recovery (i even tried naming ROM and recovery as "recovery.zip" and "update.zip").Rebooted the phone but i'm also stucked on welcome screen where i can't pass it because of "Unfortunately,WLAN stopped working".
Tried to flash ROM and stock recovery with SPFlashTool but the tool doesn't see phone at all,same as Lenovo K3 Note Manager by Pr1nc3V .Right now i'm running out of solutions for this mess i created,any advice will help.Help me please to restore my phone.
EDIT: i just realized that i actually made a "factory reset" in TWRP recovery..not just wipe data,cache and dalvik.....what are my options now folks?
Ok i'm happy to announce that i resolved my problem (after a panic mode on,lol).Here is what i did..
1. Obviously you have to get back on your stock (original,ugly chinese-english one) recovery (in case you already didn't..).To do that i used SP Flash tool.(i wouldn't go into details but if you need just ask).
After that we have following situation..stock recovery + dev ROM (which isn't working well).
2.If you try to flash any ROM in this state it will fail (based on my experience,i tried to flash exactly same ROM which is already installed..no way.).So now next step is to get a CUSTOM (TWRP or CM) recovery,again flashing it with SP Flash tools.
From this point you can choose wher would you go...STOCK rom ,MODDED one ...anything actually.I hope i clarified a bit.
sptools is not detecting my device

Categories

Resources