I got one of the Brazil/LatinAmerica I9000T phones running in the US/AT&T 3G:
Product code GT-I9000HKTTTT
PDA: I9000TUBJG5
PHONE: I9000TUBJG7
CSC: I9000TUUBJG4
Im concerned that upgrading may screw up my radio files. My phone has the 3 US/AT&T 3G bands 850/1900/200 that most of the I9000s dont. Can I just upgrade the PDA to a 2.2 ROM and leave the PHONE/CSC as is? If so can I upgrade that PDA to ANY ROM?
Im also concerned that since I have the latin american phone with brazil firmware on it, and it says on bootup that its a I9000T but its not the I9000B model that the MUST READ describes as a brazil model... So Im not sure what all pit files and ROMs that are safe to use.
Optimally, when I do upgrade to 2.2, should I try to use a MODEM and CSC file from the US/AT&T/Captivate 2.2 files, and use whatever PDA ROM I choose? That seems in my head to be what to shoot for but I'm still figuring things out here...
Also, Im confused... these ROMs Im seeing are installed via update.zip, not by the ODIN method. Will I screw up my phone by installing these update.zip files?
Is there a free method to totally back up my PDA/PHONE/CSC into individual files that could be restored later?
Hello Friend.
I have the same version of phone, and I´m looking to for "original" firmware.
You've got the original firmware?
Did you guys found a solution for.. i also have the same version...
Hello everybody
Have you guys loked here?
http://forum.xda-developers.com/showthread.php?t=907701
I downgraded to 2.1 with the i9000T stock rom
Now that 2.2.1 is out for the i9000HKTTTT (i9000TUBJP9), I wanted to see if KIES would now work. After downgrading to 2.1update 1 using ODIN ,everything appears work fine on the phone. I tried updating to 2.2.1 via KIES and still get the message "This Device's version can't be upgraded" . I tried this on a few different computers with KIES 1.5 & 2.0 and no luck.
I did do a Factory reset *2767*3855# , but still no luck.
All information on the phone appears to be OK for 2.1 update 1.
I did notice in Kies if you apply the Registry Patcher and use code CWW, you will get a different message which shows that it's currently up to date. Maybe meaning, Jamaica has not received their updates yet.
Any ideas. Very frustrating. Just trying to get this phone back to stock so it can receive updates when I give to another family member.
GT-i9003
By any chance any one have a link for the latin America Stock rom for the I9003... I write in this tread since is the closer one I found about LatinAmerican Roms.
It sims there are only Europeans, Asians, Arabic and the US rom.
I installed every one and each of them. the signal was fading in and out, and I was only getting edge.
so any one with the I9003 Latin america Stock Rom?
I just installed I9000XWJS3 on my I9000T however I lost 850 band, I would like to know if is it safe to install JL2 Modem found on this post http://forum.xda-developers.com/showthread.php?t=906977
They have note in there that reads
"NOTE: If you have a Bell i9000M, do the following to (hopefully) prevent your internal SD card from dying:
1. Upgrade to JL2 using either Kies (recommended) or Odin (make sure to check Bootloader Update)."
Do I have to check Bootloader Update option since mine is a I9000T?
Also when going to menu *#1234# I got this
PDA: I9000XWJS3
PHONE:I9000XXJPY
CSC: Unknown
How can I fix CSC? which one is compatible with my current device settings?
Thanks in advance
Ok first of all i used search but couldnt find it.
I have installed stock 2.3.3 to i9000
it shows 3g working small icon near reception bars, but it wont connect to internet, i tried the same ROM, and CSC for 2 different i9000, the same problem.
so my question is "can i install JVK(2.3.3) PDA with another old version CSC file?"
Thanks..
gilean86 said:
Ok first of all i used search but couldnt find it.
I have installed stock 2.3.3 to i9000
it shows 3g working small icon near reception bars, but it wont connect to internet, i tried the same ROM, and CSC for 2 different i9000, the same problem.
so my question is "can i install JVK(2.3.3) PDA with another old version CSC file?"
Thanks..
Click to expand...
Click to collapse
Having dug around in several different CSC files, I have not found anything that indicates that they are version specific and I know that some of the custom 2.3.3 ROMs, such as Simply Honey 3.0, use the same CSCs as froyo.
It is possible that some of the locations in the 2.3.3 file structure are different, but it can't hurt to try. Just make a solid backup, flash a CSC you know works for your region and carrier, and see what happens.
Yes you can install another CSC .
jje
I have a 2 week old Galaxy Tab which Kies refuses to update I did not mess with it in any way, no root, no aftermarket firmware whatsoever...
Current firmware version: PDA:JMG / PHONE:JMA / CSC:JM6 (LUX)
Model number: GT-P1000
Firmware version: 2.2
Baseband version: P1000XXJMA
Kernel version: 2.6.32.9; [email protected] #1
Build number: FROYO.XWJMG
I got it in Belgium which is where I live but the firmware version says LUX which I assume means Luxembourg. Could this be my problem?
*#272*IMEI# choose your country CODE and press install , this is will wipe everything in your tab .... then check the kies after that
Thanks! I'm trying this as we speak, do you have any idea which sales code to use for Belgium? I tried EUR, it seems logical (Europe?), but I will try them all if I have to -- I'll report back later
Edit: it's not EUR, it shows some weird alphabet, Greek I think I'll keep trying!
Edit 2: PHN gave a Dutch interface but Kies refused to update it as well, so I'll keep on trying different codes
So I tried doing the sane thing (instead of checking each code separately and waiting 2-3 minutes for the device to reset) and looked up every code and the corresponding country. Here's what I got:
YOG (Spain)
XEO (Poland)
XEH (Hungary)
VDH (Hungary)
TPH (Portugal)
SUN (Switzerland)
PHN (Netherlands)
OPT (Portugal)
MOZ (Switzerland)
LUX (Luxemburg)
IRD (Slovakia)
FOP (Spain)
EUR (Greece)
CYO (Cyprus)
COS (Greece)
AUT (Switzerland)
ATO (Austria)
No Belgium... Does this mean I will never be able to update my tab?
I tried LUX (which is a neighbouring country and the code that came with the device) and PHN (which uses the same language and is also a neighbouring country) but when connected to KIES both refused to update
its mean you have to flash your firmware or ask from anyone to give you the CSC files that has your country that in case you are rooted and have CWM i doubt you don't have
so
in second chance follow my guide to flash your stock firmware http://forum.xda-developers.com/showthread.php?t=1133590
u must download your firmware , from samfirmware.com but before download any one , check if it has your country or no , by this link http://www.samfirmware.com/samfit.htm
start to copy the firmware code from each firmware up there and see if its for your country or no ....
is that so hard ?
Did you buy the tab from a carrier? This configuration looks like it was made by a carrier or a specialised business. Is it a work tab i.e you got it from work.
In your country the out of the box new tabs should be PDA: JMG Phone: JMF CSC: JMG
DarkPal said:
Did you buy the tab from a carrier? This configuration looks like it was made by a carrier or a specialised business. Is it a work tab i.e you got it from work.
In your country the out of the box new tabs should be PDA: JMG Phone: JMF CSC: JMG
Click to expand...
Click to collapse
now he is yours , you are the pro with kies update
lol, I used up all my Google-fu and searched everything I could think of.
Anyway, I know how to root and flash custom firmwares -- I've done it with another Samsung -- but I just wanted to do this one the "official" easy way. But it looks like KIES won't play nice
To answer your question, I won the tab so I didn't buy it from a carrier nor was it SIM-locked. I'll see if I can find a JMG/JMF/JMG .zip somewhere and report back later -- thanks
cannot update out of box
even i purchased a galaxy tab from dubai but when i connected to kies it said my version of device could not be updated. but then i followed this link http://forum.xda-developers.com/showthread.php?p=13682956&mode=linear#post13682956 to install gingerbread and now everything is working fine, market and everything else works fine but the pda field and csc field shows empty when i dial *#1234# .
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
rangercaptain said:
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
Click to expand...
Click to collapse
man such a pain just to use a application thats SUPPOSED to work OOB.
glad i never needed to use kies
wolfie083188 said:
man such a pain just to use a application thats SUPPOSED to work OOB.
glad i never needed to use kies
Click to expand...
Click to collapse
It's the exact same work to upgrade using kies as it is to flash a custom (or stock) rom using odin3 1.7 (or heimdal).
So in what way is it a pain?
u mean to say if i flash my tab with a stock rom then it can be later updated using kies when further updates are available.
rangercaptain said:
Both of you have to flash a stock rom and repartition.
But if you have to do that, why not just flash stock gingerbread?
Click to expand...
Click to collapse
I agree -- it's just that I was curious as to why this would happen with an out-of-box stock device.
I know how to use Odin (that is, I know how to follow a tutorial ), I've used it before to flash an Eclair to Froyo, but I'm not sure which ROM to use. I'm on samfirmware.com and downloaded P1000XXJMQ (2.3.3) -- is this the one I should use?
To be honest, I don't even know which samfirmware.com ROM I would need to revert to my current firmware version (PDA:JMG / PHONE:JMA / CSC:JM6)... I think it's either P1000XXJM6 (because of the CSC:JM6) or P1000XWJMG (because of the PDA:JMG)... It's confusing me
So I have 2 questions:
Is P1000XXJMQ a stock Gingerbread?
What ROM do I need in case I want to downgrade to my current firmware? P1000XXJM6 or P1000XWJMG or another one? Edit: I did *#1234# and assume it's P1000XWJMG.
By the way, CSC = Country Sales Code? (just a guess)
Edit: I'm going to flash P1000XXJMQ, I hope I don't brick it, wish me luck I'm a nervous wreck, I drank way too much coffee this morning
Edit 2: the one that samfirmware.com says is JMQ is actually JQ1... still looking for JMQ because I think that's a newer version
Okay, here's an update on what I've done so far and on the outcome...
The link for P1000XXJMQ on SamFirmware was actually P1000XXJQ1 so I went with that one.
According to SamFIT it's for the following regions: Austria, Benelux, France, Germany, Hungary, Italy, Spain; which includes Belgium.
I ran Odin3 v1.7 with Re-Partition, Auto Reboot and F. Reset Time; I used PIT file gt-p1000_mr.pit and PDA file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar; etc.
Long story short, I'm running Gingerbread but still no sales code for Belgium when I *#272*IMEI#... so KIES keeps refusing to update. It doesn't really matter now because I'm running the latest but I'd like to fix this for future updates.
I searched a lot but I must be doing something wrong. Can anyone give me some advice?
sarduwie said:
Okay, here's an update on what I've done so far and on the outcome...
The link for P1000XXJMQ on SamFirmware was actually P1000XXJQ1 so I went with that one.
According to SamFIT it's for the following regions: Austria, Benelux, France, Germany, Hungary, Italy, Spain; which includes Belgium.
I ran Odin3 v1.7 with Re-Partition, Auto Reboot and F. Reset Time; I used PIT file gt-p1000_mr.pit and PDA file P1000XXJQ1_P1000XXJQ1_P1000XXJPZ_HOME.tar; etc.
Long story short, I'm running Gingerbread but still no sales code for Belgium when I *#272*IMEI#... so KIES keeps refusing to update. It doesn't really matter now because I'm running the latest but I'd like to fix this for future updates.
I searched a lot but I must be doing something wrong. Can anyone give me some advice?
Click to expand...
Click to collapse
What message does kies state? Is it "latest firmware" or "cannot be updated"?
If it says "latest" then no update yet is available. If "cannot update" then your CSC does not match any firmware combination with samsung...
If you read samfirmware FAQ they have stated that the firmware they post is not official so they don't actually say that samsung recognizes them.
bongski55 said:
What message does kies state? Is it "latest firmware" or "cannot be updated"?
If it says "latest" then no update yet is available. If "cannot update" then your CSC does not match any firmware combination with samsung...
If you read samfirmware FAQ they have stated that the firmware they post is not official so they don't actually say that samsung recognizes them.
Click to expand...
Click to collapse
So far it's always been "cannot be updated". I knew it was a CSC problem, I just don't know where to get the right firmware. That's why I asked if P1000XXJMQ is a stock Gingerbread. I'm going to try and find a stock fw and flash it.
Edit: is this the right one: [stock rom][2.3.3] p1000xxjq1 p1000xxjq1 p1000xxjpz ?
JQ1 is stock for Italy
k0sh said:
*#272*IMEI# choose your country CODE and press install , this is will wipe everything in your tab .... then check the kies after that
Click to expand...
Click to collapse
This worked fine for me. Thx
[Q] Flashed with Overcome "Jupiter" great but "Phone Info" incorrect
Hi all, I finally managed to restore my original IMEI from a backup thankfully after I flashed with "Overcome - Jupiter", everything else is great except for this,
My IMEI SV is now 05 instead of orig. 01.
I still get no connection to Optus eventhough I get full bars of service & the YES OPTUS network info on screen.
I also notice when I enter code - *#1234# - my info is as follows
PDA : P1000BGJP4
PHONE : I9000UGJK3
CSC : P1000OXAJQ1
I am running a Samsung Galaxy Tab P1000.
Why is it saying PHONE : I9000?
Can anyone assist
Thanks
why you don't try to re-stock with safe gingerbread v5 from samsung and then flash overcome ?
now i checked *#1234# and all are ok ? i think you need to restock with safe gingerbread that will wipe everything
Because the JK3 modem was origionally from a samsung i900.
You can make the baseband anything by flashing a different modem.bin with odin.
Go to the development section, and find the modem stickie, and take any modem you like, I'm using JPD but I'm probably going back to JK3 today.
rangercaptain said:
Because the JK3 modem was origionally from a samsung i900.
You can make the baseband anything by flashing a different modem.bin with odin.
Go to the development section, and find the modem stickie, and take any modem you like, I'm using JPD but I'm probably going back to JK3 today.
Click to expand...
Click to collapse
So u recomend JK3? I am using the original modems that rotohammer used for the modem switch JL3 for the 2g+voice not sure wich one for the 3g, how can i change the modem to be used with modem switch. Thanks.
Sent from my GT-P1000 using XDA App
First, you will only be able to use a different voice+EDGE modem. The Roto-3G modem can't be substituted.
Try out the modem for a few days in your area to see if it will be better than the current modem.
If you want to make it your permanent voice+EDGE modem, copy it to the modemswitch folder, rename the Roto-2G modem something else, like Roto-rooter, then rename your substitute modem Roto-2G.
You can easily reverse the process.