Database Develop

[Q] What are the risks of flashing MY captivate?

I made another thread asking about a problem I was having with Odin not recognizing my captivate, but with no solution there I have decided to try and install froyo a different way. It looks like the froyo guide that nbs11 wrote will work for me a lot easier than odin. I am just about to attempt it, but I have a major concern:
With odin not being able to recognize my phone at all when it is in download mode, what would happen if my phone were to become bricked? Is odin the only way to fix it then? I would not want to brick it and then have a program that will never recognize it...
,thanks

I would recommend not flashing froyo until you work out the odin problem. You will be fine the first time you flash most likely but will essentially be stuck with that one rom. Most roms will throw crazy errors and fcs if you don't go back to stock before flashing.
Also if you happen to brick your phone you will be stuck without odin. It might be tempting to flash a rom but there will be no way to go back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA App

I was afraid of this... Do you know of any other way to flash back to stock without odin? I spent 6 hours trying to get it to work yesterday with no luck...

Oh wait! I would be using clockwork and RomManager in order to flash the phone to Froyo.... Does that mean when I am on Froyo I could use the same procedure to flash back to an older firmware all without the use of Odin?

That's^ exactly what I did, I used Rom Manager (clockwork, they're one and the same) to flash the recovery, backed up the stock Eclair and flashed Axura Froyo.
I also used Titanium to back up all my apps and restore them after switching to Axura. No Odin at all.
Had this phone short of a month. I'm trying to figure out how to flash Odin now.

gunmetaldroid said:
That's^ exactly what I did, I used Rom Manager (clockwork, they're one and the same) to flash the recovery, backed up the stock Eclair and flashed Axura Froyo.
I also used Titanium to back up all my apps and restore them after switching to Axura. No Odin at all.
Had this phone short of a month. I'm trying to figure out how to flash Odin now.
Click to expand...
Click to collapse
So you can confirm that it would be completely possible to flash back to Eclair with just clockwork? If so, it might be worth doing. Well, as long as I don't get bricked... That, im sure, would require odin

totally not worth the risk. figure out ODIN first, or we will be seeing a post in a few weeks from you screaming about bricking your phone.....

Pirateghost said:
totally not worth the risk. figure out ODIN first, or we will be seeing a post in a few weeks from you screaming about bricking your phone.....
Click to expand...
Click to collapse
Thats the thing though... I see no way to get odin to work with my phone. I have tried every thing that I know of.
*sigh* guess Ill have to wait for the official froyo update then...

I prettu much figured out how to recover using Odin, but before my question is now that I've rooted and applied a custom firmware, will using Odin now wipe all of my user data, root and rom?
Thanks.

I think i get it now, Odin IS a way to recover the stock firmware, it's not like clockwork where you backup your original and custom firmware and switch between them.
The fact that I was able to flash a custom firmware without bricking my phone sort of negates the need for me to use Odin.
I took that risk and it worked fine. Now for the OP, it's better to find out that you do have that option of reverting back to stock in case you brick in the middle of flashing. Therein comes the problem that Odin doesn't recognize your phone, hence the hesitation to flash.
I guess it's really up to you if you want to do it anyway without Odin...

I see no reason to risk it... I spent too much money on this thing to brick it without a way to fix it
Sent from my SAMSUNG-SGH-I897 using XDA App

yentlequible said:
I see no reason to risk it... I spent too much money on this thing to brick it without a way to fix it
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Don't you have warranty on it? well everything that goes flashing is always a risk if your going back to stock im prefer using the "odin stock with 3 button combo", it flashes the sbl.bin first which is the 3 button combo in cases it hangs up somewhere you can always unplug the usb then go to download mode again. In cases there is also a "homemade test jig" that can help you go to download mode. The benifits you get from flashing is a lot you can use your phone full potential. Correct me if im wrong as long as you can start your phone with a display you can always fix it. I would suggest to read all those with quote and theres also "ADB" which can help in some cases. just keep in mind before flashing make sure that the 3 button combo is intact first.

Nope, I have no warranty on this... I have t-mobile but didn't want the vibrant because I would need to pay the extra money for a data plan on it. With the captivate, I bypassed the requirement for the plan when I unlocked it.
Sent from my SAMSUNG-SGH-I897 using XDA App

Ok time to re appear in this thread again. I have had a decent amount of flashing experience and want to make sure the right info us being shared.
Once again you can flash to any rom you want a couple of times.however after a few you are not found to be able to do it because what is going on in the phone of more complicated then you see on the phone. Most roms change the kernels and hardware software interaction. This can cause conflict resulting in fcs and excessive battery drain.
With all that being said I would still advise you to jump the bucket as king a you get odin to work. As long as you can figure that out you are golden. Once you have the hand of it you can flash to stock and to a rom in your sleep. I have managed to do it while on the highway.
Sent from my SAMSUNG-SGH-I897 using XDA App

A) You didn't install the driver (or the wrong driver)
B) You don't know what Download Mode is
C) Your phone is broken
D) You need to use a different USB port
Those are the ones that come to mind.
Alternatively, you could give Heimdall a try.

MikeyMike01 said:
A) You didn't install the driver (or the wrong driver)
B) You don't know what Download Mode is
C) Your phone is broken
D) You need to use a different USB port
Those are the ones that come to mind.
Alternatively, you could give Heimdall a try.
Click to expand...
Click to collapse
A) The drivers should be right, I downloaded them twice
B) I know exactly how to get to download mode.
C) Most likely
D) I Tried on 3 separate computers with different USB
Let me know if you have any other suggestions, I have tried everything.
What is Heimdall? Might be worth a shot...

Only idea i have is to pull your battery sim and sd card for a minut or two then flash odin with only your battery in.
Sent from my SAMSUNG-SGH-I897 using XDA App

I bricked my phone with an i9000 firmware. Since I was unlucky enough to have a phone without the 3 button combo, I was screwed.
Now, IF I decide to flash my new phone again, i'll make sure to put together the homemade jig which can put the phone into download mode without the phone needing to be able to do it itself.

crystalhand said:
Only idea i have is to pull your battery sim and sd card for a minut or two then flash odin with only your battery in.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That is what I have been doing actually... I take everything out and enter download mode with just the battery in the phone
Sent from my SAMSUNG-SGH-I897 using XDA App

Moved to Q&A.

Three final questions before 1st ROM Flash?

I just watched the 3 part You Tube Video on Flashing Cognition ROM to Captivate,I need to ask 3 things. First the video shows the One Click Root method though computer. I already have my root rooted with z4root app is this OK. After the new ROM is on the guy went to Market and got Ti Backup and he side loaded it can't you just load Std. way though Market?( I have the Paid Ver. of Ti Backup) Third question on the video he stated to use "restore All Apps with Data" but written on the Screen says to use "Restore Missing apps with data",which is it? I hope this my last question but I really want to sure of what I am doing before I try this.
Thanks for help

Would have been better suited in the General forum, but..
Rooting with z4mod = fine.
Getting TiBu from market = ...fine.
Restore all apps with data = literally restores all of your backups and data
Restore missing apps with data = restores apps that are not installed on the phone, ignoring ones that are installed on the phone.

Best to ask in Q&A section, but I'll still help you out.
1. Yes, that's fine. The way you root it doesn't matter, as long as it's rooted.
2. Not sure why he'd go to the Market to get it then sideload, but yes, you can get it straight from the Market, but make sure you know how to keep your donate version after a flash, as flashes (usually) wipe /data.
3. Restore Missing Apps with Data.

Thanks guys I really wasn't sure where to Post this. Yes I have Backup of Ti Backup folder on my computer.
Thanks again

If I can make a suggestion. Make sure you know what odin is and that you know how to get into download mode prior to flashing.
Odin is a way to flash stock and recover from issues
http://forum.xda-developers.com/showthread.php?t=731989
Sent from my SAMSUNG-SGH-I897 using XDA App

mcord11758 said:
If I can make a suggestion. Make sure you know what odin is and that you know how to get into download mode prior to flashing.
Odin is a way to flash stock and recover from issues
http://forum.xda-developers.com/showthread.php?t=731989
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yes. I have odin on computer and I have checked to make sure I can get into 'Download Mode". I have also load ROM Manger and made Image file of my Stock 2.1.1 ROM and have saved on Computer along with Pictures,Ringtones and have Contacts saved to Sim card.

Sounds like you're good to go then! Definitely made a lot more precautions and backed up a lot more than I did the first time, and that's definitely a good thing!

Fortune090 said:
Sounds like you're good to go then! Definitely made a lot more precautions and backed up a lot more than I did the first time, and that's definitely a good thing!
Click to expand...
Click to collapse
Now I just have to decide to "Pull the trigger" and which ROM I want,it just scary the 1st time...... The thing is my Stock ROM fine but I "LOVE TO TINKER" with stuff.

RonH54 said:
Now I just have to decide to "Pull the trigger" and which ROM I want,it just scary the 1st time...... The thing is my Stock ROM fine but I "LOVE TO TINKER" with stuff.
Click to expand...
Click to collapse
Pull the trigger, once you do tit will wonder why you waited so long
Sent from my SAMSUNG-SGH-I897 using XDA App

So true; so very true. I'm lucky if I go 3 days without flashing lately. Is there a 12-step program?
Sent from my Android using the power of my dreams.

mcord11758 said:
Pull the trigger, once you do tit will wonder why you waited so long
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
So it like after having Sex for the 1st time,it becomes addictive....

Dungeon47 said:
So true; so very true. I'm lucky if I go 3 days without flashing lately. Is there a 12-step program?
Sent from my Android using the power of my dreams.
Click to expand...
Click to collapse
If you find out about one, please let me know!
Flashing now....

RonH54 said:
So it like after having Sex for the 1st time,it becomes addictive....
Click to expand...
Click to collapse
My wife hates my phone, I love to flash. It is almost like an affair
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] Cappy Bricked??? Pls help!!!! unique problem!!!

Ok i know and have seen that there are many experienced users in this forum, so i give you this!!Pls help sum1!!!
I think i bricked my fone, tried to get cwm 3 on it, then while rebooting, it wont reboot. went into download mode with odin (3 button fix) (i have done this 9-10 times before, not a noob to this), selected pit and tar and hit start. odin stuck on factoryfs and fully orange screen on fone. removed battery, fone, usb, odin restart, tried again, yellow screen. again. red screen. now got frustrated. tried normal odin(not the 3 button fix), again yellow screen.took out battery to try again, but fone wont start/go in dl/recvry mode anymore. tried on 2 different comps with xp/win7. no go.
SCREWED??
BTW, i ordered a jig.should arrive by end of week.

It'll be fine after you get your jig.
Sent from my SAMSUNG-SGH-I897

same thing happened to me...but i just got it replaced..as there was no way i could wake it up...but try Jig..or just get it replaced...every captivate is under warranty...tell them u were doing official Froyo update and lost electricity or something....

yes will try that and post.
In the meantime, can sum1 pls run me thru the steps to install custom ROM on preinstalled froyo cappy? My prev 1 was stock eclair, i filed 4 insurance and am sure the new 1s gonna b stock froyo. I have heard that there are a no. f probs with stock froyo phones????

Its a semi uncommon problem.I have had the random colored screens before and had to pull battery. Managed to get odin to work after a couple of times
Sent from my SAMSUNG-SGH-I897 using XDA App

psycho2097 said:
yes will try that and post.
In the meantime, can sum1 pls run me thru the steps to install custom ROM on preinstalled froyo cappy? My prev 1 was stock eclair, i filed 4 insurance and am sure the new 1s gonna b stock froyo. I have heard that there are a no. f probs with stock froyo phones????
Click to expand...
Click to collapse
flash to stock using full Odin(full odin to avoid loosing 3 button combo), flash CWM.Zip....flash any froyo custum rom
or just flash the fix for sign verification (its somewhere in the threads) then you can avoid flashing to stock....just flash CWM and Custom rom

viny2cool said:
flash to stock using full Odin(full odin to avoid loosing 3 button combo), flash CWM.Zip....flash any froyo custum rom
or just flash the fix for sign verification (its somewhere in the threads) then you can avoid flashing to stock....just flash CWM and Custom rom
Click to expand...
Click to collapse
YEA, I THOT SO 2... JUZ WANTED 2 VERIFY, WAT ABOUT WEN CHANGING ROMS?do i need to flash to stock every time, or can i just take a backup f froyo stock using cwm?(sorry 4 the caps...)

Most of the custom roms don't require flashing to stock now a days. But if its mentioned in the instructions than I would do it.
But definitely you should disable lagfix and stuff before flashing over new rom.
Sent from my SGH-I897 using XDA Premium App

viny2cool said:
Most of the custom roms don't require flashing to stock now a days. But if its mentioned in the instructions than I would do it.
But definitely you should disable lagfix and stuff before flashing over new rom.
Sent from my SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.

psycho2097 said:
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
Click to expand...
Click to collapse
If u flash any zip from stock froyo it gives you sign verification error. So u need to fix that a nd than just flash custom rom as u normally do
Sent from my SGH-I897 using XDA Premium App

Crash N Burn....Owch!
psycho2097 said:
no i meant with stock froyo and 3e recvry, should i flash to stock using odin or just backup/restore using cwm? m not familiar using stock froyo on cappy.
Click to expand...
Click to collapse
Sounds as though your bootloader got hammered.
Yes, as another posted, with 3e recovery you'll get a signing error, but there is a workaround, depending on your device and ROM you're using to have files pass through as if it were on 2e recovery. Another method is if one passes files that are unsigned. (only load if it's from a trusted source)
Is it possible you performed a nandriod backup before this debacle occurred?
If so, try a restore from recovery with your last nandroid backup. This should restore the bootloader and correct partitioning on your disk.
HtH
Peace-

Liv33viL said:
Sounds as though your bootloader got hammered.
Yes, as another posted, with 3e recovery you'll get a signing error, but there is a workaround, depending on your device and ROM you're using to have files pass through as if it were on 2e recovery. Another method is if one passes files that are unsigned. (only load if it's from a trusted source)
Is it possible you performed a nandriod backup before this debacle occurred?
If so, try a restore from recovery with your last nandroid backup. This should restore the bootloader and correct partitioning on your disk.
HtH
Peace-
Click to expand...
Click to collapse
inncidentally i did do a couple of nandroids before "all the **** hit the fan". and i could use it to restore. but how? my fone simply wont turn on, neither go in2 recv/ dl. so how 2 restore???????

all 2.2 have 3e recovery, custom roms built on 2.2 come pre cracked.
here is the 3e recovery fix. http://forum.xda-developers.com/showthread.php?t=909213
it works on all 2.2 stocks with 3e.
if you are rooted using "one click root 1.7" (NOT ODIN ONE CLICK!!!) you dont need adb commands just root explorer to mount and replace file. or use adb to mount and push file. the instructions in the thread have the 2 methods mixed together.
no offence but ignore Liv33viL on this one

Trusselo said:
no offence but ignore Liv33viL on this one
Click to expand...
Click to collapse
Dude, that's just plain wrong. Let each person decide on their own who's advice to take and who's to ignore. It's an open forum and we all have the right to share our knowledge and experience. The focus here should be helping people get the assistance they need, not to diminish someone's credibility based on a personal opinion.
In short, grow up.

Trusselo said:
no offence but ignore Liv33viL on this one
Click to expand...
Click to collapse
ok, but then do u mean my bootloader is not damaged? can it be still repaired by using jig? can i restore nandroid?? but how 2 do so since my fone wont turn on at all?

What happens when you do turn it on- nothing? Or does it hang on the boot screen?
Sent from my SAMSUNG-SGH-I896 using XDA App

I had the very same problem. Your bootloater is boogered up now. I sent mine to an xda member and he fixed it.
Even with a jig I wasn't able to do anything. My phone would go into d/l mode with it but that was all it would do.
I paid $50 to have mine fixed which in my opinion is well worth it. That doesn't include shipping costs. I had connexion2005 fix it for me. He a great guy and does very fast work. It beats buying a new phone.
Hope this helps.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

All shameless advertising aside, it's worth trying a fix where others give up and pay someone. Through the process of elimination we can determine if you need professional help lol!
Sent from my SAMSUNG-SGH-I896 using XDA App

Thanks guys..will try connexion when the jig fails.
Sent from my SAMSUNG-SGH-I897 using XDA App

N does anybody know what to do, as my newly arrived cappy has a distinctive yellow tint to the screen. Do I call samsung and ask for a new one? Or is there some method to fix it by software?
Sent from my SAMSUNG-SGH-I897 using XDA App

bricked a phone using odin....what went wrong?

I'm not new to this sort of stuff either. I used odin one time on my phone with no issues what so ever. my wife just had to make a warranty claim on her phone and we just got the replacement, asked her if she wanted me to root and put cognition on and she said sure
Well it had stock 2.2 on it and it wouldn't install clockwork recovery. upon reading that it was the update causing the problem I figured id just use odin to take the phone back to 2.2. I used a brand new charge cable I've only had for 3 weeks and things started fine but eventually the screen went black and odins progress bar stopped moving... 15 mins went by and nothing was happening... so I knew it was messed up and I unplugged it...
And $125 later I have an ins replacement on the way. Understand that I've been doin this for six months and this is the first time I've ever had a problem... so what happened? major hit to my confidence here!
Sent from my SAMSUNG-SGH-I897 using XDA App

Cor-master said:
I'm not new to this sort of stuff either. I used odin one time on my phone with no issues what so ever. my wife just had to make a warranty claim on her phone and we just got the replacement, asked her if she wanted me to root and put cognition on and she said sure
Well it had stock 2.2 on it and it wouldn't install clockwork recovery. upon reading that it was the update causing the problem I figured id just use odin to take the phone back to 2.2. I used a brand new charge cable I've only had for 3 weeks and things started fine but eventually the screen went black and odins progress bar stopped moving... 15 mins went by and nothing was happening... so I knew it was messed up and I unplugged it...
And $125 later I have an ins replacement on the way. Understand that I've been doin this for six months and this is the first time I've ever had a problem... so what happened? major hit to my confidence here!
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Your prob is due to the new phones that come with 2.2 don't always work with one click Odin. Should use the recovery work around for it instead

should of known....ugh... wish I would of known this yesterday I would of been $125 richer and minus one angry wife. What about my phone now? its runing cognition 4.4.2. In light of what's happened I'm thinking about going back to stock myself and staying there... Will odin work on my phone or is there another way?
Sent from my SAMSUNG-SGH-I897 using XDA App

you could use the Odin one click for JH6, that'll take you back to eclair and you can use the Kies mini to update to 2.2 KB1
or...
you could use full odin to flash the 2.3.3 basic theres a great TUT for it. let me grab some links...
the TUT; http://forum.xda-developers.com/show...&highlight=tut
the odin to Eclair: http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+one+click
if your going to choose the gingerbread path make sure you READ a lot.
And I wouldn't lose to much confidence over it. If you look at some of the "big shots" they usually have hard-bricked a captivate.

Thanks for the reply... yeah my confidence is bruised but its hard to turn back now. Just def don't ever wanna find myself in this situation ever again. I am interested in going to gingerbread, in fact very interested. I've started to look into it I'm gonna read more before I make the big jump.
Sent from my SAMSUNG-SGH-I897 using XDA App

Thanks for the reply... yeah my confidence is bruised but its hard to turn back now. Just def don't ever wanna find myself in this situation ever again. I am interested in going to gingerbread, in fact very interested. I've started to look into it I'm gonna read more before I make the big jump.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Good to know, just follow the tutorial to a T and you'll be all set
Sent from my captivate flying firefly!

Different versions of the captivate brick when you use the 1 click Odin. Use this:
http://forum.xda-developers.com/showthread.php?t=995143

Wow same thing happened to me aswell, it scares you for future flashes.
Sent from my SAMSUNG-SGH-I896 using XDA App

Next time, (hopefully there won't be a next time for you) you should first hit up samsung warranty first. If you have att, try them before samsung. I hard bricked my phone, sent it to samsung, they fixed it, no charge and sent it back. It took about 12 days, but it was FREE. Just an fyi.
Sent from my GT-I9000 using XDA App

Jeepin' Rock Climber said:
Different versions of the captivate brick when you use the 1 click Odin. Use this:
http://forum.xda-developers.com/showthread.php?t=995143
Click to expand...
Click to collapse
What happens if your running a gingerbread rom with updated bootloaders and you decide that you want to go back to froyo and elair. Is your only option odin one click to restore the bootloaders?, what if your captivate is one of those unlucky ones that like to brick with odin one click? Would you be stuck on gingerbread?

You can use 2.2 roms with gb bootloaders, they are backwards compatible. Just make sure there are no bootloaders in the rom you flash.
Sent from my GT-I9000 using XDA App

Oh I see thanks.
Sent from my SAMSUNG-SGH-I897 using XDA App

Wait so if i flashed gingerbread bootloaders and my phone is not compatible with odin one click, is there no way to get back onto froyo/eclair bootloaders? I understand that you can still flash froyo roms without bootloaders but you can always make a mistake and flash froyo bootladers bricking your phone.

You can use the regular JH6 flash back just not the one with the three button mod, this is because the three button mod replaces 1 out of 2 bootloaders and they won't match but the JH6 only replaces both (or none not sure) and they do match
Sent from my captivate piecing together mosaic!

What's the difference between jf6 and jh6?
Sent from my SAMSUNG-SGH-I897 using XDA App

Check stuff from studacris on this forum. He's very knowledgeable and helpful. I saw somewhere where he wrote about using odin one click to flash stock with any build. You'll get a bootloop, or a soft brick, and then put in download and flash the jf6 secure with odin. That way you have boots and stock. Don't quote me on any of this. I'm going off memory and might have some of this wrong. Don't want anyone mad at me for the wrong info. Just read into his posts, before trying any of this. You'll definitely learn a lot.
Sent from my SAMSUNG-SGH-I897 using XDA App

This was what I was taking about.
studacris said:
sounds like you have a later build phone that doesnt like odin one click...thats all your gonna get out of it is a bootloop
get into download mode and use this package:http://forum.xda-developers.com/showthread.php?t=995143
if you go to gingerbread and want to revert back to stock bootloaders you will have to use one click, even though you will end up in a bootloop and then use the package i posted to get it up and running completly sotck.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using XDA App
Sent from my SAMSUNG-SGH-I897 using XDA App

New to Rom Flashing - URGENT Help needed!

Hi all,
Sorry if i sound stupid, but I am new to all of this. I am trying to flash a gingerbread ROM onto my Rogers branded captivate. Currently I am running Rogers stock Froyo.
I have rooted and unlocked my phone using one click root, and the SGS unlock tool from the android market. I have also applied Ryans OCLF. I have busybox installed and the lasted version of Rom Manager.
However, every time i go to backup my stock rom using rom manager, nothing happens. I try to first flash the Clockwork Mod recovery, select the Captivate file and let the phone reboot, black screen with a yellow exclamation point in a white triangle with a Droid device laying under it. It will sit there forever until I manually restart the phone, at which point it acts fine.
I have backed up using titanium backup but cannot do it thru ROM manager. I have read countless forums, but it havent found a solution that works.
So i decided to proceed without a backup. I tryed to put the phone in download mode using the buttons so that I can flash it using ODIN but it doesnt go into download mode using any of the buttom press methods. I have tried to reinstall the packages from the boot menu, but i then get an error saying "e: failed to verify whole signature...."
I have also put a copy of the recently leaked gingerbread rom on my SD card and tried to install the ROM using rom managers install ROM from SD card, but i get the same black screen with yellow exclamation point and nothing happens until i maually start the phone.
I have no clue what I am missing? How to fix this? I have read and watched so many tutorials, followed all the steps. THey seem so easy on paper, but nothing that is supposed to happen, happens for me. Anyone have any suggestions on what I am doing wrong?
Please help!!

You need to follow installation instructions in the thread for whatever GB rom you are installing TO THE LETTER.
Which one are you trying?

You need to search for fixing the 3e recovery. 3e won't let you install custom roms. Also rom manager is just a gui interface for clockwork mod so in. wouldn't use it
Sent from my GT-I9000 using XDA App

cappysw10 said:
You need to follow installation instructions in the thread for whatever GB rom you are installing TO THE LETTER.
Which one are you trying?
Click to expand...
Click to collapse
I was trying to install the Official Gingerbread 2.3.3 for Captivate that was just leaked for the ATT captivate. I beleive the build number is I897UCKF1.
I do remember seeing the 3e recovery in the boot menu. Thanks alot, I will try to find a recovery fix and try that, then post the update.
Thanks alot for the suggestions so far. Its greatly appreciated!

Please for the love of all that is good in the world, do some research before you brick yourself for good. All of your issues would have not happened had you read more first before jumping in. I have seen far to many of these types if threads lately. Yes it takes a few hours to go through the threads but you save yourself the time you would spend (sometimes days) fixing your mistake.

zelendel said:
Please for the love of all that is good in the world, do some research before you brick yourself for good. All of your issues would have not happened had you read more first before jumping in. I have seen far to many of these types if threads lately. Yes it takes a few hours to go through the threads but you save yourself the time you would spend (sometimes days) fixing your mistake.
Click to expand...
Click to collapse
Your absolutely right, I did ALOT of reading, been doing so alot over a few weeks. Unfortunately, (or perhaps, I did not do enough digging) none of the tutorials, even the ones for beginners that i found on this forum mentioned anything about finding a fix for the 3e recovery. No one mentioned that the 3e Recovery bundled with the Rogers version of Froyo did not allow the install of custom roms, it also did not allow backups. Thanks to Crystalhand for letting me know this.
Anyway i found this link which helped:
http://forum.xda-developers.com/showthread.php?t=909213
I am FINALLY able to make a full backup image of my stock ROM and apps using CWM. This puts me more at ease now knowing i can also revert to stock if i install a rom that is not working properly for me.
The backup is completing as I type this. I will update again once I am able to install the gingerbread Rom I wanted to install.
Thanks again to all of you for the help!

that backup is not to restore the stock rom directly from whatever you flash. that is an imaage of your set up on stock rom. so you have to use odin to flash back to that stock rom you are on then restore that backup and it will be like you never flashed anything at all. if you just restore that backup onto the custom rom you flash it will not work properly.
the app backup your making with titanium backup will restore your apps on whatever you flash, but the rom backup doesnt work like that.

I would suggest using designgears odin 1 click, becuase no offence but you seen new and that would be least likely way for you to hard brick going to gb... Good luck
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

Flashing is usually easy and safe (for the most part). But if something happends and it gets bricked u could always make/buy jigs. Easiest way to make I've seen is
forum.xda-developers.com/showthread.php?t=841512
Or you can buy them for about $8 maybe more depending your location (making em can cost less). The only thing I haven't tested the jig with is messed up bootloaders, example flashing gb bootloaders and flash froyo secundaries, everything else the jig works (atleast my experience)
Sent from my SGH-I897 running Cog 5 Beta 2

prbassplayer said:
Flashing is usually easy and safe (for the most part). But if something happends and it gets bricked u could always make/buy jigs. Easiest way to make I've seen is
forum.xda-developers.com/showthread.php?t=841512
Or you can buy them for about $8 maybe more depending your location (making em can cost less). The only thing I haven't tested the jig with is messed up bootloaders, example flashing gb bootloaders and flash froyo secundaries, everything else the jig works (atleast my experience)
Sent from my SGH-I897 running Cog 5 Beta 2
Click to expand...
Click to collapse
With messed up bootloaders you have to jtag
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

leezrd said:
With messed up bootloaders you have to jtag
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Well that's good to know. I'm not paying $150 for a jtag.
Sent from my SGH-I897 running Cog 5 Beta 2

$50 not $150.

prbassplayer said:
Well that's good to know. I'm not paying $150 for a jtag.
Sent from my SGH-I897 running Cog 5 Beta 2
Click to expand...
Click to collapse
Actually $50 by connexion 2005 but still expensive got something you don't need you to do
EDIT: Nevermind studacris beat me by a couple second to it
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

studacris said:
$50 not $150.
Click to expand...
Click to collapse
Oh? where?
Edit:
leezrd said:
Actually $50 by connexion 2005 but still expensive got something you don't need you to do
EDIT: Nevermind studacris beat me by a couple second to it
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Dosen't he charge $50 for a fix? not the jtag itself?

Mobiletechvideos.com