[Q] nothing is working,stuck at the LG logo :( - LG Optimus 2x

nothing seems to be working on my O2X.
was on CM7.initially it was fine for day to day use.but recently it had started to FCs quite often for many apps
so,i decided to get back to the stock 2.2.2
letter came to know even CWM wasnt working.
none of the previous backups(stock ones) were responding to the restore comand.
have tried through ROM manager,failed again.
then,
tried with the NVflash and still the results are the same !!!! :-O
i am unable to use any other roms through CWM as well so i have no option left now !!!!
despr8ly...need your help guys...
any advice would be appriciated...please help...

Related

[Q] Plz Help Me

Today when i use smartflash to flah a stock firmware to my lg optimus 2x everything went fine until the phones boots when it comes to the homescreen where u must setup your phone the problem is that the screen is not responding cant do anything
plz hlp me
Have you pull the battery and start again?
Sent from my LG-P990 using XDA App
Yes and i have put all the eur stock firmware and its all the same my touch screen is no more touch
to be honest at least you are back to STOCK rom so you could send it back to the shop for warranty, if they ask what happen tell them you did a HARD RESET and nothing worked after that
Do the buttons work? power and the search etc???
did you try and flash the baseband and firmware at the same time?
Only the power and volume buttons work when the phone is on
Dont you think my digitizer is dead or anyting with the hardware?
i had this before... a reflash did the job. i actually thought my phone screen was dead. however im wasnt flashing official ones, i was on custom rom and i flash another custom rom and it worked. therefore your phone is probably fine if theres no problem before you flashed.
Can u explain me how u did flash a custom rom because i tried all stock rom from the list but no result!
tried all stock roms? opps, i guess theres always an exception. :x
what happened for me:
my phone was rooted (with cwm) and one day it wouldnt respond and i thought the screen was dead no matter how many times i rebooted. so i went home, dled another custom rom, flashed and it became alive.

[Q] Gt-I9000 Freez after start up . please help!?

Alright so the short story of it ...i was on darky`s rom then decided to go on MIUI, after that i decided to install my apps and games and all that , after installing backstab game it give me a Force close and i deleted the game, after reboot i still got the FC (but i dont think that has anything to do with the problem) then my phone after boot when hes doing all the SD scanning and stuff got stuck in the SD card scan process i think and then freezes, at first i thought its bc of the MIUI rom and after several tryes whipes and allot of that i changed to a JVT stock rom (and installed root and cwm) but still after i start my phone, the screen freezes and doesnt do anything.. but when i press home button or back button they both light up or when someone calls me it works ..onlly thing is , nothing happens on my phone i cant even see if i`m getting a call or anything, i hope somebody can help me with this and sorry for my english and for the unecesary information ..i just tried to explaine everything that happend. Ty!
well i never realize the problem can be this simple and a memory card can do all this ....the problem was the card....all works fine now
I had a similar problem with the cell of a friend, after changing the external memory, no longer occurred

[Q] com.google.process.gapps has stopped

Hi!
Im new to the forum but Ive been flashing ROMs and such for around 1.5years.
Now to my problem. I flashed ParanoidAndroid over on my HTC one and everything worked fine except the sound. So i wanted to go back to maximus 7 or to stock(but i could not find the RUU for my device :crying so after loads of hazzle i managed to flash Maxumus 7. But when i start to configure the phone it reboots and says: "com.google.process.gapps has stopped" and then start to boot and reboot over and over.
Hopefully a quick fix for you guys but i have tried other ROMs aswell. Ive tried TRick and AR HD. I hope someone has an idea whats wrong because ive been trying to fix this for 3 days now...

[Q] LG Optimus 2X touchscreen not responding

Hey Guys,
I was installing a weather widget for my O2X and he could'nt find my location.
So i tought I'll reboot my O2.
When i rebooted my phone, the touchscreen wasn't working anymore.
But before I reboot my phone it did.
So now when I turn on my device it boots, and I can see everthing : Statusbar, Lockscreen etc.
But when I try to unlock it it's not responding to my touch.
So i did a full wipe and installed the ROM again but, it wasnt working again.
So then I downloaded CM10.1 for my phone and flashed it but still not working.
Anyone got and idea?
Greetings, Hammief
Exactly what happened to me
Same thing has happened to me
I have the Wind Optimus 2x. So it will be different then what other have experienced.
Basicly I had the latest CM7 installed and I wanted to upgrade to ICS so I used the tool to repartition the device. I got ICS installed fine but the screen doesn't work anymore. I flashed back to stock with nvflash perfect and but screen doesn't work at all.
If anyone can look into these touchscreen problems or has any experience it would be appreciated.
it seems that is not problem in hardware, the problem is in software...
please try to do full wipe in recovery than try, maybe is virus, or something else
help
help.
DevLaw said:
help.
Click to expand...
Click to collapse
No idea what is wrong here.
Please try Progmaq's Full Repair Tool as a last resort.
http://forum.xda-developers.com/showthread.php?t=1975274

LG l90 405. First time touch screen issues after installing cwm

At the beginning, sorry for my English.
I flashed ( i think that is good word) custom roms a lot of time before. But two days ago my problem was appeared. I had cm13 on my lg l90 and everything worked fine and then i did an update of cm13. I reboot my phone and I saw that my touch screen in not calibrated properly. I tried flash rom a lot of times but no results. Then i totally recover my stock rom by LG flash tool and kdz file and everthing works fine, so i think that digitizer is fine. I tried to flash custom rom again, but this time i flash resurrection remix rom. So i rooted my phone ( still everything works fine) then i installed TWRP, and again bad touch screen calbration returned. I tried a few versions of TWRP and also CWM but no results. Im still trying fix that problem. If I find the solution then i write about it.
Cheers
Look for a thread about this problem (digitizer calibration or something like that), some were able to fix using a built-in app and then updating the digitizer firmware. If I record correctly you must be on stock ROM tho...
I saw a lot topics about calibration and I didn't found a solution. I also tried touch screen calibration apps from play store. Seriously, i don't know whats going on, few days ago phone work properly after installing cwm or something.
Did you try the tip from the thread bellow?
http://forum.xda-developers.com/lg-l90/help/touchscreen-unresponsive-lockscreen-t2969174
It has worked for some people. Of course, you must use 405 in the code, not 410.
Edit: it only works on stock ROM.
when I was at 13 cm, the right screen I can not be in touch. after my return to rom 5.0.2, the bottom screen I can not be in touch, but the screen on the right will be in touch. I'm confused, what should I do? Help me

Categories

Resources