Any one know what this attached picture means ?
the device turned off after entering the download mode.
Thx
i saw a youtube video with the same thing.
They said it was a depleted battery.
I am no expert though
Thats the 2nd download mode. Make sure your tab is charged andflash appropriate rom via ODIN.
Kindly post questions in Q/A section.
Related
Hi, I just rooted my phone and installed Darky's ROM etc. Everything went perfectly but I just did a factory reset on my phone through the settings > privacy menu. Then i turned my phone off, now it's stuck on the boot screen (the one that says:
Galaxy S
GT-I9000
Samsung
)
Anyone know what I can do to resolve this?
PS, I've tried booting into recovery and download mode,- only download mode works
Flash ressurrection with Odin, or just try reflash a kernel.
Post in right section next time !
And don't say "dead" "brick" if you have download mode, nothing is more "noob" !
Sent from my GT-I9000 using XDA App
Flash another ROM in Odin with re-partition. You need CSC, Modem, and ROM. The next time, factory reset/wipe, clear cache, and clear Dalvik cache before flashing to a custom ROM, not after.
Also, this is the wrong section for this.
If download mode still works, its unlikely that its ' dead'.
Probably just a corrupted filesystem or some missing file that it needs.
If youve tried everything else, the thing left to do is flash a complete firmware via either Odin or Heimdall, in download mode. That should give you a working phone again.
First, wrong section... post in the right section next tome.
Get darky resurection edition and flash with odin, then reflash darky nornal rom from cwm
Sent from my GT-I9000
WiwiPouPou said:
Flash ressurrection with Odin.
Post in right section next time !
And don't say "dead" "brick" if you have download mode, nothing is more "noob" !
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
WRAITH07 said:
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
Click to expand...
Click to collapse
follow this guide for flashing stock rom --> http://darky.ficeto.com/community/i...-stock-rom-over-darkys-rom-gt-i9000-only.486/
AND: if you can access DL mode then Recov Mode is working too. You are just doing something wrong then ... for Recov Mode you need to release all buttons when Galaxy S logo appears.
WRAITH07 said:
Apologies for being a noob, couple of questions though:
never mind
EDIT: Thanks for your responses, and don't answer the above question
thanks for your help everyone
Which is the correct section for this type of thread though?
And Mods- please move this thread to correct location, cheers!
Click to expand...
Click to collapse
For questions maybe the questions and answers section
Anyway, with download mode our phone is pretty much unbrick/killable unless you flash another bootloader which is a) rare and b) not really a threat either
I think my phone is dead.... can anyone help me verify that? I've been reading all over and tried all ways to get a response, but there's none.
I pulled the battery and let it sit for several hours before inserting. - No response.
Put in my spare batte, have it plugged to charger. Also no response.
Plug to PC, PC doesn't even see the phone.
Cannot go into recover, download or boot or show any signs of life.
It was charging fine one moment (last saw about 80%) then about 10 min later, went to unplug to use.... but found the phone dead and rather warm. (not sure if that is usual since the batt was being charged)
Anyway, I flashed my phone only 1 week ago using "Insane" kernel and doing Overclock to 1200 with about -75 undervolt across the frequencies. Did I kill the phone by doing this ???
What are my chancs of getting warranty on it if the service centre manages to find out it had been flashed??
What are my options now? Any other areas to chek and try to recover?
Thanks
Well, if you can't get into download mode, there is still one more step to try before giving up. Go to ebay and search for I9000 usb jig. That might be able to force your phone into download mode. (They are cheap. Very cheap.)
If that doesn't work, there's nothing else you can do but to bring it back to a service centre.
Check out the info for the rig you mentioned. Apparently, it doesn't wotk for phones that are totally dead. i.e. no signs of life at when buttons are pressed, no lights etc.
I brought the set down the to service centre and luckily, the lady there did not ask me anything much. She just swapped out the batt to verify, plugged into USB charger to verify... then started to fill in the form for the phone to be sent in for repairs. Though she's not the repair person.... she did mentioned that all data would be lost and most likely a new board would be put in.
I'm keeping my fingers crossed that'll be the case... just gimme a new PCBA w/o trying to repair the current one. Hope they don't have any diagnostic tool/fixture where they can boot from a "debug" chip (such as processor, etc) to do board level repair.... then it might just show up that I'm running a modified kernel & ROM.
They cant check, if you were runnig custom ROM. Stop worrying, mostly they do not have a choice but to replace PCB. This is my personal exp. with samsung.
Sent from my GT-I5700 using Tapatalk
I got a hold of my friends galaxy tab by sprint and he had asked if i can fix it. The problem that he is having is that when you turn the tab on it gets stuck in the "Samsung" screen where it flashes but never fully boots up. Now typically if this occurred on my galaxy s phone i would just simply odin back to stock problem solved. However im not too sure the same applies for a galaxy tab. Can someone please help me out with this and let me know what steps need to be taken.
He did mentioned that before this problem occurred all he did was leave it charging over night and then unplugged it and tried to power it on and thats where he encountered this odd problem.
did he modify it at all?
maybe the kernel got hosed some weird way on the way it got charged, maybe overcharged and crapped out... you could try to reload a kernel...
when this happend with me, I had rooted it and applied cmw 3.0.0 without a kernel to support the ext partition. Try powering it off and holding down the vol button while powering it on. Does it go into download mode. If so get himdell from github (it acts similar to odin) once the drivers are loaded, install the libusb drivers for himdell in the galaxy tab drivers. there should be instructions in the text doc on what to do.
you can use himdell_frontend to flash a new kerenl.
Go to.. Galaxy Tab General
Or to... Galaxy Tab Q&A
This section is for posting of dev projects/guides/ref etc not for questions or general discussion.
when using himdell, is there a file(s) that will restore back to stock ?
AnthonyAldrete said:
when using himdell, is there a file(s) that will restore back to stock ?
Click to expand...
Click to collapse
As others have pointed out, this thread belongs in Q&A or Gen, however, having said that:
There's a discussion on flashing back to stock on a Sprint Tab here: http://forum.xda-developers.com/showthread.php?t=969892&highlight=sprint+stock+firmware
That thread points to another that yields the file, but the discussion in the one I linked looked to be worth reading.
I can't comment personally, as I am running a VZW Tab.
Good luck.
anyone knows what this means???????. I'm I lost my Tab for ever???????
this is the second download mode , you are alive don't worry
follow the guide in herre and you'll be up and running soon http://forum.xda-developers.com/showthread.php?t=1133590
Edit : i mean follow the link for your tab model , you'll find the link in the thread
k0sh said:
this is the second download mode , you are alive don't worry
follow the guide in herre and you'll be up and running soon http://forum.xda-developers.com/showthread.php?t=1133590
Edit : i mean follow the link for your tab model , you'll find the link in the thread
Click to expand...
Click to collapse
by the way. I just flashed the Honeycomb 3.0 but did not like it and attempt it to revert back to an original rom and that's when I ran in to trouble. I have full root but lost my clockworkmod recovery. how can I get it back and if you know any roms for Sprint Galaxy Tab?. thanks.
there is a link in thread i gave you above , check it
Would suggest to re-stock back to original firmware as this will fix up the internal storage...
I have this same issue after a failed firmware update, i was trying to update to 2.3 I have spent about 8 hours trying to fix this using the instructions and links etc on the link you supplied however im not 100% sure which of the several issues mentioned on the link is the one I actually have. Im not able to press the down and power key to get it into download mode. The screen in the picture only comes on when its plugged into the mains charger, i have once or twice got it to come on when plugged into the pc but not had any luck getting the firmware to update as i think the rom i had might have been corrupt or something. Do you know how to get the GT to let me update the firmware when its like this??
ok update, i left the GT plugged into the laptop until it came up with the screen in the picture, once this was displayed Odin picked up that the GT was plugged in i then used Odin to update the PIT and it started working again after that Hope this helps someone cause I spent all day looking for someone to say it was a simple to fix as this
Urgently need help.
A friend of mine (novice to android) take his co-worker's Tab to flash russian Rom and flashed a rom from 4pda forum through Odin. What he didn't notice was that the Tab is Korean version (m180s, not p1000). Now he has pretty brick: tab doesn't turn on - screen stays black, whilst camera flashlight blinks like crazy. Also, no access to download mode or recovery. Could anyone here propose some remedy?
I myself used only HTC phones so far, and I ain't even a bit experienced in all that odin stuff.
Thanks in advance.
Sent from nowhere
Update: download mode acessible now, odin recognizes the phone. Now only need add_hidden.pit and JME Full (as I read here, on the forum). Could anyone share download links please?
Sent from nowhere
Hello,
Try on this thread. Contact first rnc_ebm via mail or PM and ask him/her if this firmware suits to your Tab before loading it! Because if this is not the correct firmware then you will have bigger problems then you are in currently.
http://forum.xda-developers.com/show...&highlight=M18
Thanks, bro.
Sent from nowhere
Hello,
i liked to root my GTab P1000 by using odin3 v1.70 and after 3 times of failding i disconnected the cable.
so i become on the screen just only a warning link between telephone and computer.
now, if i make the tab on the power cable i become this screen and if i make it on the computer i become nothing, the tab dont start
please can you help me.
thank you
Fully charge it now for 8hr.
Then follow the link in my signature.
What you see is just another download mode. Provided you dont run out of power while flashing, you should be able to restock.
See the guide and jump to page 7.
Sent from my GT-I9300 using xda app-developers app
Thread moved. Please ensure you post in the correct sections of the forum. Questions belong here in Q&A.