Hello,
i liked to root my GTab P1000 by using odin3 v1.70 and after 3 times of failding i disconnected the cable.
so i become on the screen just only a warning link between telephone and computer.
now, if i make the tab on the power cable i become this screen and if i make it on the computer i become nothing, the tab dont start
please can you help me.
thank you
Fully charge it now for 8hr.
Then follow the link in my signature.
What you see is just another download mode. Provided you dont run out of power while flashing, you should be able to restock.
See the guide and jump to page 7.
Sent from my GT-I9300 using xda app-developers app
Thread moved. Please ensure you post in the correct sections of the forum. Questions belong here in Q&A.
Related
Any one know what this attached picture means ?
the device turned off after entering the download mode.
Thx
i saw a youtube video with the same thing.
They said it was a depleted battery.
I am no expert though
Thats the 2nd download mode. Make sure your tab is charged andflash appropriate rom via ODIN.
Kindly post questions in Q/A section.
i was flashing I897UCKF1 Odin-1-Click and it Failed and my phone screen turned a pinkish color so i pluged the phone out and and when i put it into download mode the only thing show's is some pixles. please help, for the first few trys it would come be recognized but now its not being recognized please help
what do in need to do
Can you get into download mode? What were you running on this phone, froyo/GB, before you tried flashing kf1?
Sent from my SAMSUNG-SGH-I897 using XDA App
Please use more descriptive thread titles. For the people respectful enough to do a search before posting, titles like yours are of no use. Also, it is better to post to an existing related thread rather than start a new one. There must be a dozen or more threads like this one currently going on.
Please search and use threads that are already here instead of opening a new thread.
all the info on how to recover from a bad flash is posted in the forums.
Friends,
I tried to follow the instructions given in this web page to complete the flashing of new firmware for my Galaxy Tab. When I used the md5 file and pressed start, after some time the flash failed and the tab power turned off.
I tried another method given in this site but the 'downloader' file did not have the pit nor any other file that they have mentioned.
I also downloaded the actual latest firmware file named P7510UEKMM_XABKMM_USA_Android_3.2 and tried to use the md5 file in this one and this also failed.
Kindly help to resolve the problem and to flash the right firmware using right procedure.
Thanks very much.
still not fixed
Friends,
Am not able to post the link due to the restrictions in the forum.. however, wanted to state that, as part of the flash procedure, I need the files as below.
Click BOOTLOADER button and select: BOOTLOADER_P7510xxxxx_CL317542.tar.md5
Click PDA button and select: CODE_P7510xxxxx_CL317542_REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_P7510Oxxxxx.tar.md5
I am not sure where will I get these files.. please help me.
Thanks.
Dear friend, you are posting in the wrong forum, I think you will not get any help about your 10.1 wifi tab, because this forum is for galaxy tab 7" p1000. no offence but you are waisting your time.
Sent from my GT-P1000 using XDA
pls guide
Thanks a lot for your advice.. kindly let me know which one is the right forum.. I couldn't find the right one for 10.1" tab.. kindly guide me.
Can't be that hard.
On this site ( assuming you are using a computer and web browser)
Didn't you see a text box on top right saying Find your device...
click it and start typing.
Galaxy Tab 10.1
Even as you type, the list starts appearing...
Sent from my GT-P1000 using XDA
Hi,
Today in an attempt to upgrade my Samsung Galaxy Tab GT P1000from Android Froyo to Jelly beans, I tried rooting my device, which bricked the device, (guess that is what the condition of my tab is referred to).
As the first step, I rooted the device using z4root. It was successful. Afterward I installed ROM Manager from Android Market Place to take the backup of original ROM, which I couldn't take, as the device went dead before I could do that. After installing ROM manager, I installed ClockworkMod recovery.There was not any compatible version of CWM for my Samsung Galaxy Tab GT P1000, so I think I installed CWM 3.x or something. Afterward the device was restarted and instead of returning to the home screen it showed a recovery screen (see recovery.jpg), and no matter which option I selected, I was shown a warning sign and droid (see error.jog). Is there any way to get this fixed? or is my tabgone for ever?
The device is not locked with any carrier. I bought it independently in 2011 from eBay India. Before this happened, it was working fine.
I'd like to add that USB Debugging is not enabled. After rooting it, I disabled it for some reason, I cannot remember. I am new to rooting and stuff, so please be patience with me.
Please help.
Thanks
Bikram
Use overcome method. Follow my signature.
Sent from my GT-N7100 using xda app-developers app
priyana said:
Use overcome method. Follow my signature.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Thanks Priyana for your timly reply. I am going to download the guide and follow the instructions given there. I hope it will not be too much for a noob like me.
I do not have access to internal SD. When I connect my phone to my Windows 8 PC, drives do not appear. What to do? And I'd like to add that my tab was only 50% charged when this happened, and since than it has lost some juice. Is there a way to charge it? Will connecting it to wall charge it as it did earlier? As I take it from your document that tab needs to be fully charged before I can attempt any of the steps. Please help
I always use external SD with a card reader in PC.
They are so cheap.
For battery. Just plug it to wall charger and keep on charging.
Sent from my GT-P1000 using xda app-developers app
ID:COM is blank
priyana said:
I always use external SD with a card reader in PC.
They are so cheap.
For battery. Just plug it to wall charger and keep on charging.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I have followed the steps. Connected my tab to computer after putting it in download mode and firing up Odin 3.71, but still the screen of the software is blank, where it is supposed to show ID:COM. There is no COM port identified. I am on Thinkpad E430 3254 N2Q running Windows 8 ultimate 64bit.
How should I fix this?
Thanks
Follow salahmed post in this thread
http://forum.xda-developers.com/showthread.php?t=2281082
Sent from my GT-N7100 using xda app-developers app
need help fixing my samsung galaxy tab gt-p1000r
hello i need help to fix my samsung galaxy tab gt-p1000r. I tryed to put clockworkmod recovery 3.3 on it using odin 3 and it said it worked but all the tab does is load up with alot of coloured lines across the screen. and now it wont even turn on at all. could some one please tell me step by step how i can fix it. If i leave it on the charger it will turn on but with a blank screen with the lights lit up.
Best you restock using overcome method (follow my signature)
That is if you can go to download mode.
Sent from my GT-P1000 using XDA Free mobile app
Hi everybody!
I've got a little issue with my phone Samsnung S3(gt-i9305), I post a thread here because I don't know what else to do.
The problem is that the phone is freezed on the samsung logo which "flash", as soon as I put on the battery.
- I hold the "power" button for a long while, nothing happens
-I try to launch RecoveryMode(up+home+power), nothing happens
-I try differents battery, nothing happens
My only hope:
I can launch the "download" mode(down+home+power), but if I let the battery in, it return to the flashing logo.
So I have to remove the battery(with the USB on my PC of course) and it work!!
So I'm in download mode, without battery.
But:
- I install my latest stock ROM, about 10 times, nothing happens (Firmware : I9305XXUEMKC_I9305XEFEMK1_XEF (4.3))
- I try to do the previous step with "nand erase all" and "T-flash", nothing happens
... WTF!
Is someone's got any idea of what's going on, and how can I do to save my phone?
I'm still searchiong on the forum, but any help will be so deeeeply appreciated
Thank very much for reading and helping
I'm scratching my head very strong, and I think it may be a power supply problem, maybe the power switch on and off so the phone cannot boot, and that's why it's work when I remove the battery.
Is anybody knows that kind of problem? Do you think I can open my phone and fix the problem?
Thanks
Did u flash any file before this happened? And ur first post. Firstly, the gt-i9305 is NOT the s4. And this is the gt-i9300 forum. Anything u flash here will just lead to ur phone being hard bricked.
Sent from my GT-I9300 using XDA Free mobile app
Jumaqidi said:
Did u flash any file before this happened? And ur first post. Firstly, the gt-i9305 is NOT the s4. And this is the gt-i9300 forum. Anything u flash here will just lead to ur phone being hard bricked.
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Hi, yes I know it's the S3, it was just a mistake sorry, I fixed it.
My phone was rootet and flashed with the last official stock rom samsung I9305XXUEMKC_I9305XEFEMK1_XEF (4.3).
Until now it worked very well!
I begin to prepare myself that my phone is definitly dead :'( but 've got a full copy of my internal Sd on my computer. I would like to get back my contacts, is anybody knows how to open that kind of file: contacts2.db-wal ?
I tried with SQlite bug it didn't work.
And Jumaqidi, I just saw that I missed the line of 9305 Q&A (was just above 9300), very sorry for that, what can I do, must I post another thread in the right section, or I wait until an admin move my thread?
Thanks
Report your own post, use the red triangle, ask a moderator to move it for you.
Sent from my GT-I9300 using Tapatalk