Database Develop

[Q] Plz help! Screwd up my Captivate while re-installing Latest CM7 nightly Build181

Help Needed.Looks like i screwed by Samsung Captivate.
here is what i did :
My captivate was running cyanogen mod 7 (nightly build cm_captivatemtd_full-181)
I wanted to re-install CM7 and did the following:
1)Phone already had the copy of the same build in root directory which i used for cm7 install for the first time
2)I kept the phone in download mode and Used ODIN to flash the Kernel.It went through successfully.
3)I used the three button technique and tried to install the Build which has failed with 'assert failed:getprop (" some blah blah) saying finally installation aborted.
Not sure if i should have recopied the build to the phone instead of using the same existing build in the phone
4)Though the installation failed...my phone is not booting up and when i reboot.. the phone is hung with a message 'galaxy S scg-i897 Samsung' and doesnt boot up.
Please help on how to recover my phone to a normal state.
4)

This should be in CM7 thread. Did you try going back in to recovery? Try to get in recovery and factory reset+wipe cache and wipe dalvik and reflash?

I did all the steps you have mentioned in recovery . May i please know what do you mean by reflash?
you mean again i have flash kernal and install CM7 ?
Also as you know the i cannot copy any build to the phone as phone is booting up . Do u mean i have to use fresh build instead of the one which is there since my first cm7 install..
please suggest.Thanks for you reply.

If you can get in to cwm and you have a cm7 rom in your sd card, then you can attempt to reflash the rom. IF that's not possible ODIN back to a "stock" and start all over.

^Or...If you can get to cwm...you can mount the sdcard, in mounts and storages, and transfer what the hell ever you want over from your PC to your phone. Like a fresh download of cm7 for example...

sorry i know i am taking your time .
i am very new to these techincal words..
1)can you please help me how i can go into cwm ?
2)How to ODIN back to 'Stock'?
Thanks.

studacris said:
^Or...If you can get to cwm...you can mount the sdcard, in mounts and storages, and transfer what the hell ever you want over from your PC to your phone. Like a fresh download of cm7 for example...
Click to expand...
Click to collapse
Lol You always know a better way lol xD.
sdamarla15 said:
sorry i know i am taking your time .
i am very new to these techincal words..
1)can you please help me how i can go into cwm ?
2)How to ODIN back to 'Stock'?
Thanks.
Click to expand...
Click to collapse
CWM= ClockWorkMod its the modified recovery used to do a whole bunch of things one being flashing roms.
If you don't know how to use ODIN then you shouldn't be messing with AOSP's or flashing for that matter.
Read First thread
Captivatte Directory thread <- lots of guides there.
How to Gingerbread thread
All of these are stickied and you should understand most of them to flash "safely"

LG optimus 2x bootloop after failed cyanogen mod

Hello!
Today, i decided to install cyanogemmod on my 2x. So i downloaded ROM manager and downloaded cyanogenmod. everything went fine until i was going to boot for the first time. I got into a bootloop. so i tried taking out the battery and all that stuff but it still would't work. So i tried to recover the phone. I recovered it to a month old backup (I could not find the one i made in ROM manager before i installed cyanogenmod) The recovery went fine. But, when i rebooted it got into a loop on the lg logo! (the one without the loading bar) it would just load the lg logo, be there for like 10sec, then it would do the same. I tried recovering one more time, but it didn't work. The same thing happend. What should i do? :S Should i wipe data/factory reset?
EDIT: My phone was on android 2.3.4 before i download cyanogenmod.
BTW before i installed cyanogenmod, i forgot to clear cache and data. I was in a hurry so i did't notice the screen popping up, I automatically pressed "ok" without selecting anything.
Thanks for the help
- Kashif

Different partitions... Look for something called backtoext3 in the dev section (or somewhere else) The problem is that when you flash a custom rom like CM you convert your filesystem to EXT4, while stock is EXT3.
So basically what you have to do is:
1) Reboot into recovery
2) Wipe everything
3) Flash Backtoext3 zip
4) Restore Nandroid.
This should work. this will take you back to stock.

So i have to restart the phone, Choose wipe data/factory reset, then flash backtoext3 (how do i do it? lol) then restore nandroid (the backup i just tried to restore twice?)

kashi169 said:
So i have to restart the phone, Choose wipe data/factory reset, then flash backtoext3 (how do i do it? lol) then restore nandroid (the backup i just tried to restore twice?)
Click to expand...
Click to collapse
Yes
Flashing backtoext3 is just flashing the zip file you put on the sd card. (and then install zip from SD ) an then restore your nandroid stock backup and you're back on stock.
But you said you wanted to try CM right? In that case, wipe everything (factory reset/data + cache + dalvik) and then flash the CM7 rom and you have CM! Don't worry about backtoext3, your partitions are already on EXT4, because of your prior CM flash.

Ohh! Thanks Can you send the files for cm (2.3.4)? I've found some, but im not sure if my phone is compitable with them :S im really afraid to mess something up again

My. Signature. (CM7 temasek's KANG = the best CM7 at the moment )

I did everything and i got into a bootloop at the skating andriod screen again

OK, restored my phone back... Now it wont connect to the network and the battery has a question mark inside it. It also says the battery level is 999% heelp

Nvm, got my phone back to normal still dont understand why cm wont work...

You need cwm5 to flash cm.

I have a G2x, which is basically the same phone. But anyway, I would recommend nvflashing CWM and not getting it from ROM Manager.

CWM 5.0.2.0 will do just fine, but it is indeed old...
Anyway, are you sure you waited long enough on the CM boot screen? The first boot might take a couple of minutes. (4 or 5)

Major help please

hi everyone
i start flash custom roms couple days ago, trying out "temasek's UNOFFICIAL BUILD RC1-94" everything work great, just some of the .apk was not working, so i decide to go back to stock roms, i thought it be simple process restore it backup, but adter it restore LG logo keep boot and restart. so i start reading found this thread i try it out, load it install this zip file,
http://forum.xda-developers.com/showthread.php?t=1021554
now i can't return to recovery menu, and it keep booting and restart, please what can i do now did i brick the phone, i'm so lost right now, please help thanks

after many try and ton of reading, i thought my is total brick, trying out smartflash method also get error when flashing, thank to this post from "75markus " i was able to restore back to 2.2 froyo
http://forum.xda-developers.com/showpost.php?p=25120132&postcount=6

Next time don't forget to flash Back2Ext3 before restoring stock backup

Durio said:
Next time don't forget to flash Back2Ext3 before restoring stock backup
Click to expand...
Click to collapse
Yes - that happened to me also. My first "bad" experience with flashing

from what i read CM7 running ext4, stock runing ext3 right?
so now i'm back with stock running froyo, i still have my backup files on with sd card. Do i root and install rom manager then install Back2Ext3, and final running restore? will this restore back to my original state since i backup using cwm to backup.
thank guy

yes, cm7 uses ext4 system mount. i just use a zip file which i flash from recovery if i need to get back to ext3.
here it is btw if you are on stock froyo and want to restore stock gingerbread (if i understood you right) you dont need to use back to ext3 again, just restore your back up.

phihung07 said:
hi everyone
i start flash custom roms couple days ago, trying out "temasek's UNOFFICIAL BUILD RC1-94" everything work great, just some of the .apk was not working, so i decide to go back to stock roms, i thought it be simple process restore it backup, but adter it restore LG logo keep boot and restart. so i start reading found this thread i try it out, load it install this zip file,
http://forum.xda-developers.com/showthread.php?t=1021554
now i can't return to recovery menu, and it keep booting and restart, please what can i do now did i brick the phone, i'm so lost right now, please help thanks
Click to expand...
Click to collapse
Restore stock backup from CM needs to flash an ext4-backto-ext3 zip with cwm, what a pity you overwrite cwm with stock recovery.
Now you should try to rescue your phone with SmartFlash, finally consider nvflash method.

xilw3r said:
yes, cm7 uses ext4 system mount. i just use a zip file which i flash from recovery if i need to get back to ext3.
here it is btw if you are on stock froyo and want to restore stock gingerbread (if i understood you right) you dont need to use back to ext3 again, just restore your back up.
Click to expand...
Click to collapse
well i notice the froyo firmware is way faster than the GB i have, no lagg at all battery is really good, is there any GB stock rom run smooth without bloatware.... (like international version)

phihung07 said:
well i notice the froyo firmware is way faster than the GB i have, no lagg at all battery is really good, is there any GB stock rom run smooth without bloatware.... (like international version)
Click to expand...
Click to collapse
If you mind, try Django Manouche, Custom but stock based ROM http://forum.xda-developers.com/showthread.php?t=1410662 . I tried many CM and MIUI roms but always ended restoring Django back

Softbrick N7000 Need Help

When my phone boots it only gets to the samsung logo
I am able to use the recoverymode and downloadmode.
Wiping data won´t work. Wiping cache works.
Can´t flash a CustomROM from my SDcard through CWM
I was able to connect my phone to the PC. ADB finds the phone but adb shell won´t work. (No such file or directory <2>)
How can I install either a regular Androidversion or a CustomROM now.
found this but only for Galaxy S3, so the files won´t help me
http://forum.xda-developers.com/showthread.php?t=1840030
Hope you can help me
Tobias

Download a Stock Rom from sammobile.com or one of the prerooted Roms (I always use a GB LC1 from bodivas for this) and install it with the PC version of Odin.

tried that, Odin stops at "NAND write start!!"

AW: Softbrick N7000 Need Help
What Rom did you have and what did you do before this happened?
Sent from my GT-N7000 using xda premium

Now I used a regular Android 4.0.4. ROM
Before that I tried with a 2.3.1 ROM. This is probably the reason for the trouble, isn´t it?

Tobias H. said:
tried that, Odin stops at "NAND write start!!"
Click to expand...
Click to collapse
I wrote to download a new rom and to try it with Odin. 15 min later you said: did this.
So I want to ask: Did you really download a new Rom or did you use one you had already?
And what Rom exactly?
And what did you do before stopping at boot logo?

ThaiDai said:
I wrote to download a new rom and to try it with Odin. 15 min later you said: did this.
So I want to ask: Did you really download a new Rom or did you use one you had already?
And what Rom exactly?
And what did you do before stopping at boot logo?
Click to expand...
Click to collapse
I was already downloading the 4.0.4. ROM. Because I read somewhere it´s not possible to go from ICS to Gingerbread.
The download just finished right after you answered and I tried. I am 100% sure i got the right ROM.
Before getting all these Problems, I wanted to get a CustomROM on my phone. Android 4.0.4 was installed at that point of time.
I rooted my phone and did a backup with CWM. Then i chose wipe data, while doing that I started to charge my phone (I don´t know if that matters). I didn´t see what happen exactly because i wasn´t looking at my phone all the time, but when i looked at it again there was only the charging sign shown. Then I tried to get into recoverymode again. This wouldn´t work. I tried to flash CWM with Odin which worked after some time. Then I tried to Wipe data and cache again. wipe data wouldn´t work. Wipe cache worked. I tried to install the backup. After waiting for more then 1 hour it looked like nothing happend and the installation was stuck. But the regular recovery of Android was installed.
Because flashing a ROM through CWM wouldn´t work, I tried to flash it through Odin. First time I tried with a Gingerbread Version. I was thinking, I don´t care which version as long as it works and try again to install a CustomROM from there on. Odin stopped at NAND Write Start!!. Tried it with the ICS Stock version. Same thing.
This is where I am at now

Did you use cwm.zip?

To use with Odin? No
When I started it from the regular Android Recoverymode? Yes
Don´t you think this might be exactly the problem I have?
http://forum.xda-developers.com/showthread.php?t=1840030

Tobias H. said:
I was already downloading the 4.0.4. ROM. Because I read somewhere it´s not possible to go from ICS to Gingerbread.
The download just finished right after you answered and I tried. I am 100% sure i got the right ROM.
Before getting all these Problems, I wanted to get a CustomROM on my phone. Android 4.0.4 was installed at that point of time.
I rooted my phone and did a backup with CWM. Then i chose wipe data, while doing that I started to charge my phone (I don´t know if that matters). I didn´t see what happen exactly because i wasn´t looking at my phone all the time, but when i looked at it again there was only the charging sign shown. Then I tried to get into recoverymode again. This wouldn´t work. I tried to flash CWM with Odin which worked after some time. Then I tried to Wipe data and cache again. wipe data wouldn´t work. Wipe cache worked. I tried to install the backup. After waiting for more then 1 hour it looked like nothing happend and the installation was stuck. But the regular recovery of Android was installed.
Because flashing a ROM through CWM wouldn´t work, I tried to flash it through Odin. First time I tried with a Gingerbread Version. I was thinking, I don´t care which version as long as it works and try again to install a CustomROM from there on. Odin stopped at NAND Write Start!!. Tried it with the ICS Stock version. Same thing.
This is where I am at now
Click to expand...
Click to collapse
Why did u buy SGN? To brick it?
Do you even read and search before doing something for the first time?
LOOK, READ AND LEARN THIS for stock ROMs and kernels, specialy for ICS:
- http://forum.xda-developers.com/showthread.php?t=1424997
-http://forum.xda-developers.com/showthread.php?t=1371007
-http://forum.xda-developers.com/showthread.php?t=1827394
To run ur device find something and READ.
Try leaked JB custom ROM and stock rooted kernel with safe emmc_cap_erase block (emmc bug fix) -Philz Kernel
READ and LEARN.
Have fun
P.S. Maybe you will need our friend hg42 and his famous .PIT files so here it is: http://forum.xda-developers.com/showthread.php?t=1667886

[Q] Help me understand whats going on.

okay, first of all i will say that im sorry if what im writing is full on faulty language. enlgish isnt my best. aaaanuslut i got my brothers old gt n7000 with a broken touchpad and screen for free. i repaired that with 160€ and my brother said that the phone was rooted. i found out he had allso overclocked the device. But after a few restarts to the phone it just said something what i think was in spanish or something "bla bla bla dos sistema". After that came not your old samsung logo, but purple blueish circles just circling. Ant thats it, it would not start. So i read about bricked devices, and as much as i understood i had a soft brick. so i was looking aroun the forum for some easy fixes becasue im totally stranger to this kind of hacking. i finaly found this http://www.youtube.com/watch?v=F97qo1moAR4 and i downloaded custom jb N7000XXLSZ_N7000OPSLS6_N7000XXLSO_HOME.tar. it did work but again after i tried to restart the phone it was stuck.
So since i dont want any custom stuff i think to my self why not stock rom. so i found this http://forum.xda-developers.com/showthread.php?t=1424997. But since i dont like JB as much as ICS i will try ICS. Her is the question: i allready did the factory reset and cache wipe but this instruction says not to FROM ICS.
Warning :
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
Does that mean that i have allready gone wrong or does that mean that you have to have ICS on youre phone and then you cant do any of those things? its really confusing and i dont want to fk up my phone.

Did you make a wipe on stock ICS recovery?

zai89 said:
Did you make a wipe on stock ICS recovery?
Click to expand...
Click to collapse
My brother said that he had custom ice cream on it when i first made the wipe and tried jelly

orizont said:
My brother said that he had custom ice cream on it when i first made the wipe and tried jelly
Click to expand...
Click to collapse
can your phone boot to recovery mode now?

zai89 said:
can your phone boot to recovery mode now?
Click to expand...
Click to collapse
Yes i can

flash via recovery phils kernel, (a newer one) reboot in recovery and perform the wipe for new rom option.
That should clean your device good.
Then flash what you want. After that download an emmc check app and check. Shouldnt be needed, but its nice to check.
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
flash via recovery phils kernel, (a newer one) reboot in recovery and perform the wipe for new rom option.
That should clean your device good.
Then flash what you want. After that download an emmc check app and check. Shouldnt be needed, but its nice to check.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Allright, thankyou, since i am new to all this stuff i will try to locate a tutorial. i dont have any idea for instance, what is recovery phils kernel.

at own risk, here http://forum.xda-developers.com/showthread.php?t=1901191. Download zip, keep zipped and put on external sd. Reboot recovery and flash via install from sd option.
Since we are going to wipe latest version will do fine. However if you plan to reflash the original Samsung rom one that is same or likewise version is best to quickly root after flashing rom, so you can flash speedmod kernel (better battery life) after. Find in original dev thread of this forum.
Remember, via factory format on phills kernel recovery(reboot in recovery) you have the option to do a wipe for new rom.
Otherwise on Phills kernel recovery do factory, cache wipe. In advanced dalvik cache, in mounts all(warning take out external sd before so you dont wipe that)
Then your phone is clean, you shouldnt have to wipe efs anyway, so dont tick that option ever in pc odin when flashing rom with odin.
This is the cleanest way to get rid of All leftovers and generally the way to go before flashing any new rom. However risk of loosing photos and whatever you have not backed up. In general backing up is bad as old files/db/etc are put back (risk of unforeseen stuff happening) Check one of my 5 threads for what backups there are. Via my profile you find them
Enjoy!
Sent from my GT-N7000 using Tapatalk 2

Okay, im thankful for all this information, useful stuff, got the PhilZ-cwm6-XXLT6-XSA-5.06.1-signed.zip.

let us know how it went, ok?

OOOKAY! so i finaly did what baz77 described. and rooted with another phils kernel witch i chose after my downloaded rom. Did root it, and after powering down and waiting about 3-5 sec. i started it, and it worked, no more getting stuck on gt n7000 screen and so on. and i also downloaded emmc check app, but unfortunatley it said. Brick bug: YES. Insane Chip.

sorry for double post, how do i delete? all i can do is use edit/delete button but it only edits the post, how can i delte it?

You cant but thats ok.
all n7000 have the brickbug to my knowledge, the test should state if the bug has been triggered, if not then super, if it has, best to secure the broken emmc sectors. Tricky.
I think having it clean now should eliminate earlier issues Enjoy your n7000

Thank you, i will, lately my n7000 has been rebooting randomly, any fix or know issue why this occures?

orizont said:
Thank you, i will, lately my n7000 has been rebooting randomly, any fix or know issue why this occures?
Click to expand...
Click to collapse
not sure how that is happening. Maybe a logcat (logfiles) shows whats happening when it happens. Could be app. Maybe rom issue. Method of elimination counts here.
On safe kernel, try dalvik cache, cache wipes and fix permissions in recovery, reboot and check if reoccurs.
Otherwise, updated versions, clean install I would recommend.
You can check also before with that emmc app if there are bad sectors. I dont expect it but you never know

Okay, its been a long time since i did that stuff. And it worked allirght. i got my phone working and rooted. Great stuff here

Sorry for updating old topic. Since people who have helped me with my phone allready are familiar with my case. I was wisiting a friend of mine in england and after i returned home my phone is f**ked. Everything works okay, but when i turn on mobile data or wifi it instantly freezes. Takes about 15-20 sec. and then phone does an automatic restart which restarting gets into boot loop. I have to hold down bower button to reboot again. When it asks me for sim unlock code, i have to be quick when im inserting it because i need to turn off mobiledata/wifi as soon as ia get my phone running again, otherwise it will freeze and crash again. Can it be somekind of virus or something? Is it most likely that i have to again format and install philz kernel and all that stuff? Thanks in advance.

that would be the best way to start..IMO

I really dont have the time or opportunity to format and reflash, but i guess its really difficult, near imbossible to tell whats wrong with my samsung. Bust still, any other suggestions?